DireWolfM14
Copper Member
Legendary
Offline
Activity: 2338
Merit: 4566
Join the world-leading crypto sportsbook NOW!
|
|
July 06, 2018, 06:43:51 PM |
|
Normal behavious with phoenix? (reported vs actual etc)
That's not normal for me. My reported and 6-hour avg. are pretty near identical. They fluctuate a few percent from one another, but nothing like your graph.
|
|
|
|
jimsta
Jr. Member
Offline
Activity: 56
Merit: 1
|
|
July 07, 2018, 04:19:48 AM |
|
Normal behavious with phoenix? (reported vs actual etc) Mine looks pretty typical of that, I have AMD cards.
|
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
|
July 07, 2018, 08:15:28 AM |
|
which 18.x driver is best for phoenix? Just tried 18.6.1 on 3-card pc, and all cards started to mine with 16MH - both with Claymore and Phoenix...
|
|
|
|
mrpcrp
Newbie
Offline
Activity: 23
Merit: 0
|
|
July 07, 2018, 11:41:16 AM |
|
most likely long ping to pool and lot of stale shares
|
|
|
|
Bigdrago
Newbie
Offline
Activity: 312
Merit: 0
|
|
July 07, 2018, 11:50:49 AM |
|
most likely long ping to pool and lot of stale shares 2% stale shares. Maybw its devfee kicking in.
|
|
|
|
Iamtutut
|
|
July 07, 2018, 03:50:55 PM |
|
which 18.x driver is best for phoenix? Just tried 18.6.1 on 3-card pc, and all cards started to mine with 16MH - both with Claymore and Phoenix...
Did you forget to switch the compute mode ? 16MH/s looks gaming mode to me.
|
|
|
|
human75
Newbie
Offline
Activity: 51
Merit: 0
|
|
July 07, 2018, 05:02:56 PM |
|
Latest Amd driver but no matter which driver beside 2.9d all upper version of miner are crashes immediately. I agree with you. right now i am using 2.9d. after this version all of them crashes. i am sure developer will figure out soon. Same problem on both my rigs with 9 AMD cards each. I've upped my virtual space to 80 GB, turned down MI to 8 starting from 12, tried altinit, gser 1-6 and nothing works. Sometimes it would sporadically go through, but after I restart ( cause i like to do it weekly), it keeps crashing and I have to just keep trying again and again before it works again. Except this time, after 4 restarts, and multiple (10+), i gave up and went back to claymore on 1 of my rigs cause I'm remote and don't have 2.9 installed. Hi. phoniex miner crashes just after starting load gpu log file doesnt give too much info.here is the log: ------------------------- 2018.07.04:11:54:56.713: main Phoenix Miner 3.0c Windows/msvc - Release 2018.07.04:11:54:56.713: main Cmd line: -pool etc.arsmine.net:8008 -wal 0x1c9cfc8a55dc86cee1c07a354593428d8894ad30 -worker Robert -pass x -coin etc -rmode 1 -wdog 1 -log 2 -ftimeout 200 2018.07.04:11:55:10.755: main Available GPUs for mining: 2018.07.04:11:55:10.755: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 32 CUs 2018.07.04:11:55:10.756: main GPU2: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 36 CUs 2018.07.04:11:55:10.756: main GPU3: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 4 GB VRAM, 32 CUs 2018.07.04:11:55:10.756: main GPU4: Radeon RX 570 Series (pcie 7), OpenCL 2.0, 4 GB VRAM, 32 CUs 2018.07.04:11:55:10.756: main GPU5: Radeon RX 570 Series (pcie Cool, OpenCL 2.0, 8 GB VRAM, 32 CUs 2018.07.04:11:55:10.756: main GPU6: Radeon RX 570 Series (pcie 9), OpenCL 2.0, 4 GB VRAM, 32 CUs 2018.07.04:11:55:10.756: main GPU7: Radeon RX 570 Series (pcie 10), OpenCL 2.0, 4 GB VRAM, 32 CUs 2018.07.04:11:55:10.756: main GPU8: GeForce GTX 1070 (pcie 11), CUDA cap. 6.1, 8 GB VRAM, 15 CUs 2018.07.04:11:55:10.756: main GPU9: GeForce GTX 1050 Ti (pcie 12), CUDA cap. 6.1, 4 GB VRAM, 6 CUs 2018.07.04:11:55:10.756: main GPU10: Radeon RX 580 Series (pcie 13), OpenCL 2.0, 4 GB VRAM, 36 CUs 2018.07.04:11:55:11.338: main ADL library initialized 2018.07.04:11:55:11.375: main NVML library initialized 2018.07.04:11:55:12.143: main Listening for CDM remote manager at port 3333 in read-only mode 2018.07.04:11:55:12.143: main Eth: the pool list contains 1 pool 2018.07.04:11:55:12.143: main Eth: primary pool: etc.arsmine.net:8008 2018.07.04:11:55:12.143: main Starting GPU mining 2018.07.04:11:55:12.143: main Matched GPU1 to ADL adapter index 32 (method 1) 2018.07.04:11:55:12.425: main GPU1: Created ADL monitor for adapter 32; overdrive version: 7 2018.07.04:11:55:12.426: main GPU1: using AMD driver ver 18.6.1 2018.07.04:11:55:12.426: main Matched GPU2 to ADL adapter index 80 (method 1) 2018.07.04:11:55:12.855: main GPU2: Created ADL monitor for adapter 80; overdrive version: 7 2018.07.04:11:55:12.855: main GPU2: using AMD driver ver 18.6.1 2018.07.04:11:55:12.855: main Matched GPU3 to ADL adapter index 64 (method 1) 2018.07.04:11:55:13.369: main GPU3: Created ADL monitor for adapter 64; overdrive version: 7 2018.07.04:11:55:13.369: main GPU3: using AMD driver ver 18.6.1 2018.07.04:11:55:13.370: main Matched GPU4 to ADL adapter index 96 (method 1) 2018.07.04:11:55:13.752: main GPU4: Created ADL monitor for adapter 96; overdrive version: 7 2018.07.04:11:55:13.752: main GPU4: using AMD driver ver 18.6.1 2018.07.04:11:55:13.753: main Matched GPU5 to ADL adapter index 112 (method 1) 2018.07.04:11:55:14.328: main GPU5: Created ADL monitor for adapter 112; overdrive version: 7 2018.07.04:11:55:14.329: main GPU5: using AMD driver ver 18.6.1 2018.07.04:11:55:14.329: main Matched GPU6 to ADL adapter index 48 (method 1) 2018.07.04:11:55:14.627: main GPU6: Created ADL monitor for adapter 48; overdrive version: 7 2018.07.04:11:55:14.627: main GPU6: using AMD driver ver 18.6.1 2018.07.04:11:55:14.627: main Matched GPU7 to ADL adapter index 16 (method 1)
-------------------------------------------------------- Any help? 2.9d works with out any problem. Many thx in advance
What version AMD driver are you running?
|
|
|
|
peteris-apse
Jr. Member
Offline
Activity: 98
Merit: 1
|
|
July 08, 2018, 11:10:01 AM |
|
So whats your settings on amd rx570/580?
On one 580 rig I have found this to be ok.
-mi 14 -gt 100 -clKernel 2 -clNew 1 -clf 2
|
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
|
July 08, 2018, 12:53:07 PM |
|
which 18.x driver is best for phoenix? Just tried 18.6.1 on 3-card pc, and all cards started to mine with 16MH - both with Claymore and Phoenix...
Did you forget to switch the compute mode ? 16MH/s looks gaming mode to me. The tool said all are in compute :/ Graphics mode is ~20-22. The weird part was that frontbus was maxed ad 68% according to Afterburner
|
|
|
|
spykerhond
Newbie
Offline
Activity: 11
Merit: 0
|
|
July 08, 2018, 09:39:53 PM |
|
this unstable eth virus of a pheonix miner mines the best so far !
|
|
|
|
Iamtutut
|
|
July 08, 2018, 10:24:04 PM |
|
which 18.x driver is best for phoenix? Just tried 18.6.1 on 3-card pc, and all cards started to mine with 16MH - both with Claymore and Phoenix...
Did you forget to switch the compute mode ? 16MH/s looks gaming mode to me. The tool said all are in compute :/ Graphics mode is ~20-22. The weird part was that frontbus was maxed ad 68% according to Afterburner With all the AMD drivers with compute mode I've used, I've never seen a lower hashrate in compute compared to gaming. Using win 10 or win 7 ? Front bus should be 100% Did you disable SLI / crossfire in your mobo bios ?
|
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
|
July 09, 2018, 08:01:40 AM |
|
win7 ... It seems there is no way to enable compute mode under Win7 and later (18.x) drivers. Tried everything (registry, compute-switch tool) - FB usage stays at 65-68%
|
|
|
|
chschlumpf
Newbie
Offline
Activity: 24
Merit: 0
|
|
July 09, 2018, 12:43:50 PM |
|
Hello I needed to install the drivers new. I use -amd. I use RX480, blockchain driver and 3.0c. Stopped working last friday. FATAL ERROR: Debugger detected What can I do? Claymore is working. Thx for helping
|
|
|
|
jimsta
Jr. Member
Offline
Activity: 56
Merit: 1
|
|
July 09, 2018, 02:04:33 PM |
|
I had the same issues, this past week.. the 3.0 versions gave my 2 rigs massive problems. It just wouldn't start and kept crashing. I've switched back to 2.9 on 2 rigs and claymore on my nvidia mining rig (nvidia on phoenix kept locking up the rig). Hello I needed to install the drivers new. I use -amd. I use RX480, blockchain driver and 3.0c. Stopped working last friday. FATAL ERROR: Debugger detected What can I do? Claymore is working. Thx for helping
|
|
|
|
Tienlv
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 09, 2018, 06:41:22 PM |
|
HI ANYBODY help me >this my erro 1050ti 4G. how can i fix them ? thanks GPU8 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.876: GPU1 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.878: GPU1 GPU1 search error: unspecified launch failure 2018.07.09:08:38:32.879: GPU8 GPU8 search error: unspecified launch failure 2018.07.09:08:38:32.888: GPU4 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.888: GPU4 GPU4 search error: unspecified launch failure 2018.07.09:08:38:32.889: GPU5 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.889: GPU3 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.889: GPU3 GPU3 search error: unspecified launch failure 2018.07.09:08:38:32.889: GPU5 GPU5 search error: unspecified launch failure 2018.07.09:08:38:32.889: GPU7 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.889: GPU7 GPU7 search error: unspecified launch failure 2018.07.09:08:38:32.890: GPU6 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.890: GPU6 GPU6 search error: unspecified launch failure 2018.07.09:08:38:32.953: GPU2 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.953: GPU2 GPU2 search error: unspecified launch failure 2018.07.09:08:38:33.234: wdog Thread(s) not responding. Restarting.
|
|
|
|
j2james
Newbie
Offline
Activity: 80
Merit: 0
|
|
July 09, 2018, 06:50:01 PM |
|
HI ANYBODY help me >this my erro 1050ti 4G. how can i fix them ? thanks GPU8 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.876: GPU1 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.878: GPU1 GPU1 search error: unspecified launch failure 2018.07.09:08:38:32.879: GPU8 GPU8 search error: unspecified launch failure 2018.07.09:08:38:32.888: GPU4 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.888: GPU4 GPU4 search error: unspecified launch failure 2018.07.09:08:38:32.889: GPU5 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.889: GPU3 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.889: GPU3 GPU3 search error: unspecified launch failure 2018.07.09:08:38:32.889: GPU5 GPU5 search error: unspecified launch failure 2018.07.09:08:38:32.889: GPU7 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.889: GPU7 GPU7 search error: unspecified launch failure 2018.07.09:08:38:32.890: GPU6 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.890: GPU6 GPU6 search error: unspecified launch failure 2018.07.09:08:38:32.953: GPU2 CUDA error in CudaProgram.cu:329 : unspecified launch failure (719) 2018.07.09:08:38:32.953: GPU2 GPU2 search error: unspecified launch failure 2018.07.09:08:38:33.234: wdog Thread(s) not responding. Restarting.
Typically this is a problem of over overclocking of memory. Try to decrease it. I had this error many times while I did not decrease memory overclocking.
|
|
|
|
chillyray
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 10, 2018, 02:14:24 AM Last edit: July 11, 2018, 03:18:25 AM by chillyray |
|
Hey I got this issue where Phoenix just stops forever (doesn't freeze rig) at the point where it *should* list out all the detected graphics cards.
Thing is I have 4 rigs all the same base hardware, cloned drives and 3/4 of them run Phoenix 3.0c without any issue the one of them just stops at that listing GC point. The only differences between rigs is the brand of graphics cards: 1. All Sapphire RX580 8gb - No problem 2. Mix of MSI & Sapphire RX580 8Gb - No problem 3. Mix of Sapphire RX580 4Gb & Nvidia - No problem 4. All MSI RX580 8gb - Halts at Phoenix prompt detecting graphics cards, no output, waited 30mins nothing?
And also all 4 rigs had been previously running claymore for around a year without any issue. The MSI rig will run up claymore without issue *but* after an attempted Phoenix run it will not work, I have to first reboot the rig.
So its something to do with Pheonix + the GC bios' in that rig?
Anyone seen this issue? How can I get more (than nothing) diagnostics output?
Thanks!
Edit: btw this is the only thing in the log:
2018.07.10:12:26:40.888: main Phoenix Miner 3.0c Windows/msvc - Release 2018.07.10:12:26:40.888: main Cmd line: -pool stratum+tcp://connect.ubiqminers.com:3004 -wal 0x55a742880e846549aED7f147dbFe24e7A0eA075e.rig1 -proto 4 -amd
|
|
|
|
MaxMidnite
Newbie
Offline
Activity: 143
Merit: 0
|
|
July 10, 2018, 07:14:56 AM |
|
I'm having a problem with the latest version. 6 x RX580 cards, all is well for a few hours, then my machine seems to freeze. I need to do hardreset to get it to work again, I'm not sure what the problem is. On my other 2x Nvidea 1070ti machine there no issues and runs for days. I do not think its overclock but not sure.
Whats the best way to see what the problem is?
|
|
|
|
digitalunix
Newbie
Offline
Activity: 18
Merit: 0
|
|
July 10, 2018, 08:00:46 AM |
|
I'm having a problem with the latest version. 6 x RX580 cards, all is well for a few hours, then my machine seems to freeze. I need to do hardreset to get it to work again, I'm not sure what the problem is. On my other 2x Nvidea 1070ti machine there no issues and runs for days. I do not think its overclock but not sure.
Whats the best way to see what the problem is?
check sleep and wake up functions... it seems something like that.
|
|
|
|
|
|