sergioheadache
Jr. Member
Offline
Activity: 43
Merit: 1
|
|
December 29, 2019, 10:58:14 AM |
|
actually they can demonstrate, they checked the bios and see that it was flashed for mining and also, in this store where i bought they had a little text that say for warranty is for "normal home use" (its actually a bad translation) but you get the point.
anyways, if you dont get them replaced or fixed, i would buy them for parts. PM me it it will be relevant.
|
|
|
|
tg88
Legendary
Offline
Activity: 2520
Merit: 1464
Payment Gateway Allows Recurring Payments
|
|
December 29, 2019, 11:35:33 AM |
|
actually they can demonstrate, they checked the bios and see that it was flashed for mining and also, in this store where i bought they had a little text that say for warranty is for "normal home use" (its actually a bad translation) but you get the point.
Curious, which country are you from? In this case I would choose gpus that do not need to change BIOS for good results.
|
|
|
|
sergioheadache
Jr. Member
Offline
Activity: 43
Merit: 1
|
|
December 29, 2019, 12:04:59 PM |
|
Curious, which country are you from? In this case I would choose gpus that do not need to change BIOS for good results.
Im from Israel No need to flash bios for mining (just if you want to squeeze last 0,x MH from it, in my opinion doesn't worth the risk), also if the card is dead, bios is useless. I don't think they desolder bios for checking it if was flashed or not, also if they do that, you can blame them for flashed intentionately that bios/or hardware modiification especially for voiding warranty. Is your word against they word. I don't know they are accreditate to desolder bios chip or make hardware modification (as seller or service, it they are not official AMD), any hardware modification will void automatically warranty. I think important is to have intact AMD sticker on screew.
flashing bios is not only for 0.xMH, there are many more reasons and in my case, card was not completely dead, i was working but crashing all the time, so they could check the bios. it is also my fault for not flashing back to original - i was young and stupid back then LOL
|
|
|
|
PhoenixMiner (OP)
|
|
December 30, 2019, 09:17:00 AM Last edit: March 09, 2021, 01:39:13 AM by PhoenixMiner |
|
The new beta version is ready. You can download PhoenixMiner 4.9b from here: (MEGA links are no longer active) If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows): File: PhoenixMiner_4.9b_Windows.zip =================================== SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1 SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a
File: PhoenixMiner_4.9b_Linux.tar.gz ==================================== SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0 SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15 SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10
File: PhoenixMiner_NVRTC_Windows.zip ==================================== SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
The new features in this release are: - Added support for AMD RX5500 cards
- Added support for the latest AMD Windows drivers 19.12.3
- Fixed the problem with loading NVML library with the latest Nvidia drivers
- Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
- Added an HTML version of the documentation for better navigation and readability
Please let us know if you have any problems or questions related to PhoenixMiner 4.9b.
|
|
|
|
zertor
Jr. Member
Offline
Activity: 56
Merit: 6
|
|
December 30, 2019, 02:36:23 PM |
|
Super, works fine. I get: GPU1: unable to get fan speed - Not Supported (3) It's expected message, because my card don't have such feature, but is it possible to suppress it? [turn it off] (its annoying to appear constantly) or to appear one time only while initialization.
|
|
|
|
qqqq
Legendary
Offline
Activity: 1596
Merit: 1011
|
|
December 30, 2019, 08:37:07 PM |
|
The new beta version is ready. You can download PhoenixMiner 4.9b from here: https://mega.nz/#F!2NkkjaxC!OOFiV0uPuPI1YoebTE7hMw (MEGA) If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows): File: PhoenixMiner_4.9b_Windows.zip =================================== SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1 SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a
File: PhoenixMiner_4.9b_Linux.tar.gz ==================================== SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0 SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15 SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10
File: PhoenixMiner_NVRTC_Windows.zip ==================================== SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
The new features in this release are: - Added support for AMD RX5500 cards
- Added support for the latest AMD Windows drivers 19.12.3
- Fixed the problem with loading NVML library with the latest Nvidia drivers
- Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
- Added an HTML version of the documentation for better navigation and readability
Please let us know if you have any problems or questions related to PhoenixMiner 4.9b. Didn't fixed a bug Eth: Failed to submit hashrate: Exception -32601 : METHOD_NOT_FOUND: The method being requested is not available on this server: the method eth_submitHashrate d oes not exist/is not available Proper name "eth_submitHash Rate" now i guess.
|
|
|
|
VasilyS
|
|
December 30, 2019, 09:23:35 PM |
|
4.8c didn't work on my AMD rigs, there were constant crashes. I used 4.8b as more stable version. After few hours of checking 4.9b looks good. Frankly, there is no changes in hashrate in comparison with previous versions.
|
|
|
|
0xcosmos
|
|
December 31, 2019, 08:38:12 PM |
|
4.8c didn't work on my AMD rigs, there were constant crashes. I used 4.8b as more stable version. After few hours of checking 4.9b looks good. Frankly, there is no changes in hashrate in comparison with previous versions.
did you try updating the graphics driver to the latest version? then you may not have constant crashes like you have in 4.8c version
|
|
|
|
VasilyS
|
|
January 01, 2020, 04:41:38 AM |
|
4.8c didn't work on my AMD rigs, there were constant crashes. I used 4.8b as more stable version. After few hours of checking 4.9b looks good. Frankly, there is no changes in hashrate in comparison with previous versions.
did you try updating the graphics driver to the latest version? then you may not have constant crashes like you have in 4.8c version Yes, I tried. Phoenix said that it was a bag with multiGPU system with different overclock settings.
|
|
|
|
Trehjulingsleffe
Newbie
Offline
Activity: 17
Merit: 0
|
|
January 01, 2020, 10:54:03 AM Last edit: January 01, 2020, 11:42:49 AM by Trehjulingsleffe |
|
The new beta version is ready. You can download PhoenixMiner 4.9b from here: https://mega.nz/#F!2NkkjaxC!OOFiV0uPuPI1YoebTE7hMw (MEGA) If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows): File: PhoenixMiner_4.9b_Windows.zip =================================== SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1 SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a
File: PhoenixMiner_4.9b_Linux.tar.gz ==================================== SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0 SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15 SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10
File: PhoenixMiner_NVRTC_Windows.zip ==================================== SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
The new features in this release are: - Added support for AMD RX5500 cards
- Added support for the latest AMD Windows drivers 19.12.3
- Fixed the problem with loading NVML library with the latest Nvidia drivers
- Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
- Added an HTML version of the documentation for better navigation and readability
Please let us know if you have any problems or questions related to PhoenixMiner 4.9b. I've tried 4.9b now with driver 19.12.3 and it says unknown openCL driver and hangs when mining about 15 seconds (totaly freeze, cut the power is the only solution) Reverted back to 19.9.2 driver and it mines at about 20 minutes, then hang and reboots itself. About 0,3% better hashrate than 4.7c (cant use 4.8c at all) No logging. Hardware:Motherboard: Asus B250 Mining Expert CPU: i5 6500 RAM: 8gb Virual memory: 64gb Gpu's (in order in miner): RX470,RX470,RX580,RX580,Vii,RX470,RX470,RX470,RX580,RX470 Conf for cards:-cclock 1240,1240,1250,1250,1830,1240,1240,1240,1220,1240 -mclock 2150,2150,2150,2150,1030,2150,2150,2150,2120,2150 -cvddc 930,890,890,930,970,890,930,900,950,900 -mvddc 935,900,910,930,950,900,930,900,950,900 -clKernel 1 -mi 14 -amd -acm -cdm 2 Is it something there that's not compatible with 4.9b?Edit: over an hour now with 4.9b without issues. 19.9.2 driver, still can't use 19.12.3.
|
|
|
|
skinnyfalcon
Newbie
Offline
Activity: 49
Merit: 0
|
|
January 01, 2020, 03:51:28 PM |
|
Yes, I tried. Phoenix said that it was a bag with multiGPU system with different overclock settings.
Has anyone addressed this issue? I have AMD 19.12.2 and phoenix 4.9b, random crashes still pop up frequently. Most people have multi GPU systems with different OC setting for max hash.
|
|
|
|
0xcosmos
|
|
January 01, 2020, 07:07:16 PM |
|
Yes, I tried. Phoenix said that it was a bag with multiGPU system with different overclock settings.
oh okay did not knew about that Has anyone addressed this issue? I have AMD 19.12.2 and phoenix 4.9b, random crashes still pop up frequently. Most people have multi GPU systems with different OC setting for max hash.
as with the previous post taken as reference try downgrading the driver version to the version it may resolve the issue with no impact on hash rate
|
|
|
|
UnclWish
|
|
January 02, 2020, 07:17:32 AM |
|
I've tried 4.9b now with driver 19.12.3 and it says unknown openCL driver and hangs when mining about 15 seconds (totaly freeze, cut the power is the only solution) Reverted back to 19.9.2 driver and it mines at about 20 minutes, then hang and reboots itself. About 0,3% better hashrate than 4.7c (cant use 4.8c at all)
No logging.
Hardware: Motherboard: Asus B250 Mining Expert CPU: i5 6500 RAM: 8gb Virual memory: 64gb Gpu's (in order in miner): RX470,RX470,RX580,RX580,Vii,RX470,RX470,RX470,RX580,RX470
Conf for cards: -cclock 1240,1240,1250,1250,1830,1240,1240,1240,1220,1240 -mclock 2150,2150,2150,2150,1030,2150,2150,2150,2120,2150 -cvddc 930,890,890,930,970,890,930,900,950,900 -mvddc 935,900,910,930,950,900,930,900,950,900 -clKernel 1 -mi 14 -amd -acm -cdm 2
Is it something there that's not compatible with 4.9b?
Edit: over an hour now with 4.9b without issues. 19.9.2 driver, still can't use 19.12.3.
On RX 580 8Gb cards 4.9b works fine with 19.12.3 driver.
|
|
|
|
skinnyfalcon
Newbie
Offline
Activity: 49
Merit: 0
|
|
January 03, 2020, 03:41:56 AM |
|
|
|
|
|
UnclWish
|
|
January 03, 2020, 06:40:23 AM |
|
The size of DAG allways increase steps by 8Mb every time. And every time when it grows up it's need more vmemory. And you must remember that all equipment wears. PSU, GPU chips, vmemory chips... All these equip can degradate with time cause to 24/7 work on close to 100% using. Try to raise voltages on GPU's and mvddc a bit and check.
|
|
|
|
ninjam
Newbie
Offline
Activity: 84
Merit: 0
|
|
January 03, 2020, 08:14:09 PM |
|
Is is normal to have different hashrate for eth and etc? Nvidia gpus. Difference is about 2.5% more when mining ethereum. 4.8c version.
|
|
|
|
Digital_Seytan
Jr. Member
Offline
Activity: 222
Merit: 2
digiseytan@walletofsatoshi.com
|
|
January 03, 2020, 10:13:44 PM |
|
Is is normal to have different hashrate for eth and etc? Nvidia gpus. Difference is about 2.5% more when mining ethereum. 4.8c version.
why there is a difference with the same config eth mining and etc 3% difference is nobody understands
|
DonateSATS:Digiseytan@WALLETOFSATOSHi.COM SHOPFREE: https://satsback.com/register/1QEJyGPlg4LN5kwx ETC+Zil Pool:https://k1pool.com/invite/895eb07555
|
|
|
Digital_Seytan
Jr. Member
Offline
Activity: 222
Merit: 2
digiseytan@walletofsatoshi.com
|
|
January 03, 2020, 10:34:34 PM |
|
Hello dev PM why is there not even a new version with a big change ??
|
DonateSATS:Digiseytan@WALLETOFSATOSHi.COM SHOPFREE: https://satsback.com/register/1QEJyGPlg4LN5kwx ETC+Zil Pool:https://k1pool.com/invite/895eb07555
|
|
|
darkneorus
Jr. Member
Offline
Activity: 238
Merit: 3
|
|
January 03, 2020, 10:48:57 PM |
|
Is is normal to have different hashrate for eth and etc? Nvidia gpus. Difference is about 2.5% more when mining ethereum. 4.8c version.
why there is a difference with the same config eth mining and etc 3% difference is nobody understands because of different DAG size.
|
|
|
|
UnclWish
|
|
January 04, 2020, 06:51:06 AM |
|
Is is normal to have different hashrate for eth and etc? Nvidia gpus. Difference is about 2.5% more when mining ethereum. 4.8c version.
why there is a difference with the same config eth mining and etc 3% difference is nobody understands Try to make autotune both on one and another. I think best -gt parameters will differ.
|
|
|
|
|