philipma1957
Legendary
Offline
Activity: 2198
Merit: 1293
Avalon 841 rocks


November 05, 2013, 02:23:14 PM 

What do you mean with n' and ? Your using both bricks on that hub at the same ? How's that work since AFAIK, that hubs got only the one power inout, can you post some pics of your setup ? Also, how do you find that hub works out or you ? Like does it ryn well / do the job ok ? Thx for those links, I miht have missed it but whats the v / amp info on that brick ?Best I can tell using both bricks would power 22 ASIC's doesnt leave much for headroom, maybe try two lenovos instead ? you use 1 brick at TIME . that hub is a 20 stick hub. THE OEM 90 watt brick is 20 volts and 4.5 amps. the hub converts the 20 volts to 5 volts. most dc to dc converters are 80%. so the 90 watt oem brick only has 90 x .8 = 72 real watts the 20 sticks pull about 2.5 3 watts constantly or 60 watts . to run gear 24 /7/365 80% of max is a safe number... so 80% of the 72 real watts is 57.6 watts. This means that the oem brick can safely deliver 57.6 watts under 'perfect' conditions. since your 20 sticks may pull up to 60 watts the oem brick is short just a little.. but the brick I pointed out is 135 watts with the jack an exact match. So 135 x 80% = 108 real watts at 5 volts then 80% of that is 86.4 watts which is over and above the 60 watts needed.

I mine alt coins with https://simplemining.net... I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.







Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.




philipma1957
Legendary
Offline
Activity: 2198
Merit: 1293
Avalon 841 rocks


November 05, 2013, 02:39:52 PM 

Hello all...I have been away from the mining (BitMinter) game for awhile...is graphic card mining "officially dead" now? Is around 500 Mhps even worth doing anymore? 2nd question: are those USB stick ASIC miners any good/worth it (seem much cheaper, but what about "value"..."per hash price", etc.) Thanks!
I'd suggest looking into scrypt coin mining with a GPU, if your electricity is cheap enough it might be worth it. The ASIC Miner USB's are still a bit overpriced, but if you can get a good deal they can be worth it. Like buy some from one of the group buys, then sell some on ebay to reduce the unit cost for what you keep. this is true of the usb sticks. they are close to okay if you buy this https://bitcointalk.org/index.php?topic=303640.420 https://bitcointalk.org/index.php?topic=303640.340 50 sticks and a 49 port hub I am running 3x of them on one pc very hard to run this many sticks on 1 pc, but if running just 1 use 35 of the 49 ports sell the other 15 sticks on ebay and it is pretty good.

I mine alt coins with https://simplemining.net... I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.



Walter Rothbard


November 05, 2013, 03:24:42 PM 

DrHaribo, if I have the prepay BTC perk turned on, should I ever see any BTC in the "unconfirmed" column under account details?
You wouldn't normally see it. But it takes a few seconds for the pool to distribute funds to miners after a block is found. It also takes a few seconds after that for cash out to happen for those who are over the threshold. Have patience, and don't stare at the screen waiting for blocks  it causes bad luck Ah, okay  so it was my fault! I'll try not to be such a compulsive reloader.




MoreBloodWine
Legendary
Offline
Activity: 1344
Merit: 1000


November 05, 2013, 06:19:51 PM 

you use 1 brick at TIME . that hub is a 20 stick hub. THE OEM 90 watt brick is 20 volts and 4.5 amps. the hub converts the 20 volts to 5 volts.
most dc to dc converters are 80%. so the 90 watt oem brick only has 90 x .8 = 72 real watts the 20 sticks pull about 2.5 3 watts constantly or 60 watts . to run gear 24 /7/365 80% of max is a safe number... so 80% of the 72 real watts is 57.6 watts. This means that the oem brick can safely deliver 57.6 watts under 'perfect' conditions. since your 20 sticks may pull up to 60 watts the oem brick is short just a little.. but the brick I pointed out is 135 watts with the jack an exact match.
So 135 x 80% = 108 real watts at 5 volts then 80% of that is 86.4 watts which is over and above the 60 watts needed.
So the tock brick is just a paper weiht then, I thought you meant you used both bricks lol. I'm still lost in the math on the replacement brick, I thouht you always went by the amperage and since 1 amp is 1000ma / 2 ASIC's since each one pulls approx 500ma then the total advertised amps of the replacement brick would do 13 ASIC sicks. Lenovo 45N0058 135W 20V 6.75A Even then, the amperage on the stock is 4.5 which would be 7 sticks at 500ma each. I know I'm probably missing something here but I've always seen people discuss the amperae as what matters. I just dont wana spend money on something to litterally have it blow up on me. I've already invested just under $200 and I don't even have my hub yet, as far as asics go. I could only afford 4 to start off.




arch
Jr. Member
Offline
Activity: 35
Merit: 0


November 05, 2013, 07:21:02 PM 

Seems today was the worst luck.




MoreBloodWine
Legendary
Offline
Activity: 1344
Merit: 1000


November 05, 2013, 07:32:54 PM 

Seems today was the worst luck. What happned ?




lano1106


November 05, 2013, 08:40:44 PM 

is it me or the pool hashrate is following the BTC/USD exchange rate...??

BTC: 1ABewnrZgCds7w9RH43NwMHX5Px6ex5uNR



Walter Rothbard


November 05, 2013, 09:37:47 PM 

is it me or the pool hashrate is following the BTC/USD exchange rate...?? The hashrate grows every time DrH calls for more jiggawatts.




philipma1957
Legendary
Offline
Activity: 2198
Merit: 1293
Avalon 841 rocks


November 05, 2013, 09:45:00 PM 

you use 1 brick at TIME . that hub is a 20 stick hub. THE OEM 90 watt brick is 20 volts and 4.5 amps. the hub converts the 20 volts to 5 volts.
most dc to dc converters are 80%. so the 90 watt oem brick only has 90 x .8 = 72 real watts the 20 sticks pull about 2.5 3 watts constantly or 60 watts . to run gear 24 /7/365 80% of max is a safe number... so 80% of the 72 real watts is 57.6 watts. This means that the oem brick can safely deliver 57.6 watts under 'perfect' conditions. since your 20 sticks may pull up to 60 watts the oem brick is short just a little.. but the brick I pointed out is 135 watts with the jack an exact match.
So 135 x 80% = 108 real watts at 5 volts then 80% of that is 86.4 watts which is over and above the 60 watts needed.
So the tock brick is just a paper weiht then, I thought you meant you used both bricks lol. I'm still lost in the math on the replacement brick, I thouht you always went by the amperage and since 1 amp is 1000ma / 2 ASIC's since each one pulls approx 500ma then the total advertised amps of the replacement brick would do 13 ASIC sicks. Lenovo 45N0058 135W 20V 6.75A Even then, the amperage on the stock is 4.5 which would be 7 sticks at 500ma each. I know I'm probably missing something here but I've always seen people discuss the amperae as what matters. I just dont wana spend money on something to litterally have it blow up on me. I've already invested just under $200 and I don't even have my hub yet, as far as asics go. I could only afford 4 to start off. okay that 20 port hub can not run 20 sticks with the oem power brick. this is a fact as I own the hub and have tested it with the 20 ports and the oem brick. if you have this hub just run 14 to 16 sticks and you will be fine.

I mine alt coins with https://simplemining.net... I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.



Scoobypup
Jr. Member
Offline
Activity: 39
Merit: 0


November 05, 2013, 11:15:46 PM 

What's with the string of bad luck the past few days? I'm starting to feel bad for not switching to another pool and instead staying for the Mint Race.




MoreBloodWine
Legendary
Offline
Activity: 1344
Merit: 1000


November 05, 2013, 11:39:47 PM 

you use 1 brick at TIME . that hub is a 20 stick hub. THE OEM 90 watt brick is 20 volts and 4.5 amps. the hub converts the 20 volts to 5 volts.
most dc to dc converters are 80%. so the 90 watt oem brick only has 90 x .8 = 72 real watts the 20 sticks pull about 2.5 3 watts constantly or 60 watts . to run gear 24 /7/365 80% of max is a safe number... so 80% of the 72 real watts is 57.6 watts. This means that the oem brick can safely deliver 57.6 watts under 'perfect' conditions. since your 20 sticks may pull up to 60 watts the oem brick is short just a little.. but the brick I pointed out is 135 watts with the jack an exact match.
So 135 x 80% = 108 real watts at 5 volts then 80% of that is 86.4 watts which is over and above the 60 watts needed.
So the tock brick is just a paper weiht then, I thought you meant you used both bricks lol. I'm still lost in the math on the replacement brick, I thouht you always went by the amperage and since 1 amp is 1000ma / 2 ASIC's since each one pulls approx 500ma then the total advertised amps of the replacement brick would do 13 ASIC sicks. Lenovo 45N0058 135W 20V 6.75A Even then, the amperage on the stock is 4.5 which would be 7 sticks at 500ma each. I know I'm probably missing something here but I've always seen people discuss the amperae as what matters. I just dont wana spend money on something to litterally have it blow up on me. I've already invested just under $200 and I don't even have my hub yet, as far as asics go. I could only afford 4 to start off. okay that 20 port hub can not run 20 sticks with the oem power brick. this is a fact as I own the hub and have tested it with the 20 ports and the oem brick. if you have this hub just run 14 to 16 sticks and you will be fine. I know the OEM brick wont run full 20, so I do know thatt yes I will need the brick you specified. Either way I will need to use all 20 port even though 4 of them will be used by fans and the other 16 ASICs. Sorry if I got on your nerves... I just cant afford to burn something out even if that something is as little as $20. What's with the string of bad luck the past few days? I'm starting to feel bad for not switching to another pool and instead staying for the Mint Race.
What's this bad luck everyone keeps talkin about, with pools nothins ever guaranteed.




philipma1957
Legendary
Offline
Activity: 2198
Merit: 1293
Avalon 841 rocks


November 06, 2013, 02:29:41 AM 

Lenovo 45N0058 135W 20V 6.75A I know the OEM brick wont run full 20, so I do know thatt yes I will need the brick you specified. Either way I will need to use all 20 port even though 4 of them will be used by fans and the other 16 ASICs.
Sorry if I got on your nerves... I just cant afford to burn something out even if that something is as little as $20. Its cool the upgraded brick is not cheap and sometimes writing a clear easy to understand explanation is hard for me to do. I have run my 20 port with 20 sticks I have run it with 16 sticks and 4 fans. all with the better brick. here is the 20 port in action on the upper left . the better brick is in use.

I mine alt coins with https://simplemining.net... I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.



smoothrunnings


November 06, 2013, 03:09:31 AM 

What's Bitminter's server time based on, which time clock?
It shows that it's the 6th already yet its still 10:00PM EST on the 5th of November.




Walter Rothbard


November 06, 2013, 03:10:58 AM 

What's Bitminter's server time based on, which time clock?
It shows that it's the 6th already yet its still 10:00PM EST on the 5th of November.
I think most of the world runs on UTC.




Walter Rothbard


November 06, 2013, 03:38:37 AM 

Somebody just kicked us up over 250 TH/s.
It wasn't me, but I did just order more hashing power.




smoothrunnings


November 06, 2013, 03:52:30 AM 

What's Bitminter's server time based on, which time clock?
It shows that it's the 6th already yet its still 10:00PM EST on the 5th of November.
I think most of the world runs on UTC. The world doesn't run on UTC time, otherwise there wouldn't be need a for time zones.




smoothrunnings


November 06, 2013, 03:54:44 AM 

Somebody just kicked us up over 250 TH/s.
It wasn't me, but I did just order more hashing power.
I have noticed that other pool sites have increased by 200+ GH/s in the last week. I sure hope you have invested in at least 1TH




TheQuin


November 06, 2013, 05:58:38 AM 

What's with the string of bad luck the past few days? I'm starting to feel bad for not switching to another pool and instead staying for the Mint Race.
The thing about variance is that as soon as you do that Bitminter will go on a lucky streak and you'll miss it.




derekleong75


November 06, 2013, 02:16:20 PM 

is it me or the pool hashrate is following the BTC/USD exchange rate...??
Im glad im not the only one who feels the same way.




derekleong75


November 06, 2013, 02:17:57 PM 

What's with the string of bad luck the past few days? I'm starting to feel bad for not switching to another pool and instead staying for the Mint Race.
The thing about variance is that as soon as you do that Bitminter will go on a lucky streak and you'll miss it. Quoted for truth. I moved to BTCguild after a bad spell and watched the payouts dwindle....




