Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[stiffla]

Anyone can help me here ??

I can´t connect to TL-MR3020 router, it is connected to my other router, i´ve tried 192.168.0.99 and 192.168.0.99/24  and i can´t get connection

Another thing is can i connect different asics via the router ?? I mean hex16a and hex16a2 ?? How to make it and insert values for 2 different Asic´s ??

Another question is .. I´m using windows, how to ssh to router ??

Sorry for all this noob questions but i´m starting in Asic´s and this is all new to me so please be gentle

I think a managed to BRICK my MR3020 router.

I flashed it with openwrt with cgminer, which worked all fine.
I connected again to 192.168.0.99 and set an ip so i can use the router in client mode.

After that I accidently closed the tab of my routers interface, and now it is not possible to reconnect again.
Already tried to factory reset the device, but no success so far with any trys.
Do you have any ideas or tips?

[1713262757]

1713262757

[1713262757]

1713262757

[1713262757]

1713262757

[1713262757]

1713262757

[1713262757]

1713262757

[Zich]

I think a managed to BRICK my MR3020 router.

I flashed it with openwrt with cgminer, which worked all fine.
I connected again to 192.168.0.99 and set an ip so i can use the router in client mode.

After that I accidently closed the tab of my routers interface, and now it is not possible to reconnect again.
Already tried to factory reset the device, but no success so far with any trys.
Do you have any ideas or tips?

I guess you just lost the ip address. What is your new IP?
Did you closed the tab right after save & apply or wait the process a little while? if you closed right after save & apply, usually the old IP still there.
If you had main router, then you can check the statistic. Try find odd IP that not used by actively send & receive data, that's the TL-MR3020.

[stiffla]

I guess you just lost the ip address. What is your new IP?
Did you closed the tab right after save & apply or wait the process a little while? if you closed right after save & apply, usually the old IP still there.
If you had main router, then you can check the statistic. Try find odd IP that not used by actively send & receive data, that's the TL-MR3020.

I used a static ip and a direct connection from my pc, so no statistic.
Ip before flashing: 192.168.0.254
afterwards: 192.168.0.99

I don't know, I think I only clicked save and then accidently closed my tab.

[Zich]

I ordered the same but the Jan batch. Is the power connector part of the package?

What replacement fan would you recommend?

No, the power connector( Blue & black cable with EPS adapter) & blue heatsink is not part of the package. I made the power connector & buy the heatsink in EBAY

I am still looking for other fan that closed to SUNON performance. i will post if i find something that closed enough since i had air conditioner in room. That sunon really great, just too noisy for me to place it in my bed room  

Try prepare what you need from now, so when the miner arrived you can start hashing.
PSU, the host ( PC or TPLINK TL-MR3020), usb cable.

[Zich]

I guess you just lost the ip address. What is your new IP?
Did you closed the tab right after save & apply or wait the process a little while? if you closed right after save & apply, usually the old IP still there.
If you had main router, then you can check the statistic. Try find odd IP that not used by actively send & receive data, that's the TL-MR3020.

I used a static ip and a direct connection from my pc, so no statistic.
Ip before flashing: 192.168.0.254
afterwards: 192.168.0.99

I don't know, I think I only clicked save and then accidently closed my tab.

I mean what is the new IP you trying to set when you click save. But if you only click save not save & apply then the ip should still 192.168.0.99.

But then i am confuse, how did you connect to the internet? You should had modem, and router if had several PC ?

[dave111223]

Handed in a refund request.  A January shipment is no good to me; will never ROI.

[stiffla]

I mean what is the new IP you trying to set when you click save. But if you only click save not save & apply then the ip should still 192.168.0.99.

But then i am confuse, how did you connect to the internet? You should had modem, and router if had several PC ?

I was trying to set 192.168.0.30.
The plan was, that the router connects to my internet wifi router as client.

I wasn't connected to internet while i was setting up the tp-link, all local and I downloaded the firmware image before.

[joeventura]

Handed in a refund request.  A January shipment is no good to me; will never ROI.

Sounds like a Pre-order scam

You order then he tries to get the parts, sometimes he delivers, sometimes not.

[Zich]

I mean what is the new IP you trying to set when you click save. But if you only click save not save & apply then the ip should still 192.168.0.99.

But then i am confuse, how did you connect to the internet? You should had modem, and router if had several PC ?

I was trying to set 192.168.0.30.
The plan was, that the router connects to my internet wifi router as client.

I wasn't connected to internet while i was setting up the tp-link, all local and I downloaded the firmware image before.

Ok, now connect the TL-MR3020 to your wifi router. You should be able see the statistic on you wifi router since the cgminer will trying to connect to pool.

[Zich]

Trying cgminer 3.8.5 on ubuntu using virtualbox under WIN 7 64bit  

[loshia]

Trying cgminer 3.8.5 on ubuntu using virtualbox under WIN 7 64bit  

Looks good

[Zich]

Trying cgminer 3.8.5 on ubuntu using virtualbox under WIN 7 64bit  

Looks good

Yup, overall only consume additional 5% memory from host.
So i will let it run there for a while 

[stiffla]

Ok, now connect the TL-MR3020 to your wifi router. You should be able see the statistic on you wifi router since the cgminer will trying to connect to pool.

Ok, got it now.
I see the ip address of the router is 192.168.0.30, but I am not able to connect, neither do I see any outgoing connection from cgminer

[Zich]

Ok, now connect the TL-MR3020 to your wifi router. You should be able see the statistic on you wifi router since the cgminer will trying to connect to pool.

Ok, got it now.
I see the ip address of the router is 192.168.0.30, but I am not able to connect, neither do I see any outgoing connection from cgminer

But you can not access the router from web interface or ssh?
can you ping the address?

[stiffla]

But you can not access the router from web interface or ssh?
can you ping the address?

no access via web, no ping and no ssh, I can't even get in failsafe mode

[Zich]

But you can not access the router from web interface or ssh?
can you ping the address?

no access via web, no ping and no ssh, I can't even get in failsafe mode

What is your PC IP adddress?

[stiffla]

my ip is 192.168.0.23

[Zich]

my ip is 192.168.0.23

Hmmm, sorry dude, i had no clue to solve this.

[Umklopp]

http://s22.postimg.org/zfyyqmoo1/hex.jpg

When I click the start button, a red/orange led on the hex16a2 starts burning, the "work age" starts running, but no hashing occurs.
It's connected to a Corsair 430 watt PSU (30A on 12v) with nothing else attached to it, so that should be OK. (and yes, PSU is running by connecting the green and a black wire on the 24p plug)
I've tried 2 different USB cables, both didn't work.
The user on BTC guild works, I'm using the same (but with _1, this one is _2) for my AntMiner and it works fine.

I'm just confused about the proxy window, it shows all kinds of errors but they don't really make sense to me.... help help please

Any solutions on this?

[acidfox]

Any solutions on this?

The solutions is o use the right settings: