Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[braindead]

Yes i bought from Technobit

Is this version of cgminer incorrect ??

I have a normal hub not powered with 3 x hex16a connected to tp-link

[1714009079]

1714009079

[1714009079]

1714009079

[1714009079]

1714009079

[Zich]

Yes i bought from Technobit

Is this version of cgminer incorrect ??

I have a normal hub not powered with 3 x hex16a connected to tp-link

No, it's good.

Did you mean 3 x HEX16A2 or 3 x HEX16A ? Because HEX16A avalon gen 1 board need powered usb HUB.
Try to insert 1 board first directly to TL-MR3020.

[Zich]

After searching for 2 day, i found FAN that at least half of SUNON PF92251v1-000U-S99 performance & available in local computer store.
My first choice is Zalman ZM-F2 Plus but not available at the moment. So i buy Zalman ZM-F2 LED which is more expensive because of the useless LED.

So, now HEX16A2 move to bedroom joining 2 x HEX16A on TPLINK TL-MR3020  

[braindead]

Yeah it works with just one hex16a plugged in, seems i need to power my hub somehow to detect the others, can i give more power to the router? in order to detect the other units?? 

[Zich]

Yeah it works with just one hex16a plugged in, seems i need to power my hub somehow to detect the others, can i give more power to the router? in order to detect the other units?? 

I am not sure about that. Right now where are the TPLINK got power from? Using stock adaptor or from PSU that powered the miner?
You can try using power from PSU.

[awgilyas]

Yeah it works with just one hex16a plugged in, seems i need to power my hub somehow to detect the others, can i give more power to the router? in order to detect the other units?? 

I am not sure about that. Right now where are the TPLINK got power from? Using stock adaptor or from PSU that powered the miner?
You can try using power from PSU.

Is there any guide in setting the router up? I got one but I can't seem to detect it on my network. (Non configured one from Amazon)

[Zich]

braindead, if you want to buy powered usb hub for this, buy cheap no brand usb hub. They work better, i don't know why  

I use this 7 port usb hub or buy something like this 10 port usb hub

[braindead]

braindead, if you want to buy powered usb hub for this, buy cheap no brand usb hub. They work better, i don't know why  

I use this 7 port usb hub or buy something like this 10 port usb hub

I made it work many many tks for all the help

I´ve powered the router throught the PSU so my hub now is working great and all my 3 hex16a and my 2 hex16a2 are now detected and minning   wwwwweeeeee

Still waiting for my other 8 units of hex16a2 to arrive to connect them also, we have to moove fast because difficulty is getting higher and the chances for ROI are getting lower

[Zich]

braindead, if you want to buy powered usb hub for this, buy cheap no brand usb hub. They work better, i don't know why  

I use this 7 port usb hub or buy something like this 10 port usb hub

I made it work many many tks for all the help

I´ve powered the router throught the PSU so my hub now is working great and all my 3 hex16a and my 2 hex16a2 are now detected and minning   wwwwweeeeee

Still waiting for my other 8 units of hex16a2 to arrive to connect them also, we have to moove fast because difficulty is getting higher and the chances for ROI are getting lower

Great 

[loshia]

braindead, if you want to buy powered usb hub for this, buy cheap no brand usb hub. They work better, i don't know why  

I use this 7 port usb hub or buy something like this 10 port usb hub

I made it work many many tks for all the help

I´ve powered the router throught the PSU so my hub now is working great and all my 3 hex16a and my 2 hex16a2 are now detected and minning   wwwwweeeeee

Still waiting for my other 8 units of hex16a2 to arrive to connect them also, we have to moove fast because difficulty is getting higher and the chances for ROI are getting lower

Congrtas,
And learn your lesson always use a single power from psu with common ground

[loshia]

After searching for 2 day, i found FAN that at least half of SUNON PF92251v1-000U-S99 performance & available in local computer store.
My first choice is Zalman ZM-F2 Plus but not available at the moment. So i buy Zalman ZM-F2 LED which is more expensive because of the useless LED.

So, now HEX16A2 move to bedroom joining 2 x HEX16A on TPLINK TL-MR3020  

Super!
I wish I could see your nanos also mining at same host
You can clock a little bit more your A2 for 23 GH if you wish

[Zich]

Super!
I wish I could see your nanos also mining at same host
You can clock a little bit more your A2 for 23 GH if you wish

The nano make CPU usage up to 90% 
Since i change the fan with less static air pressure, then i fear add more clock will make the chip too hot 

[loshia]

Super!
I wish I could see your nanos also mining at same host
You can clock a little bit more your A2 for 23 GH if you wish

The nano make CPU usage up to 90%  
Since i change the fan with less static air pressure, then i fear add more clock will make the chip too hot  

True CPU goes high but nothing to fear about I do have 7 hexa +2 nanos all working great without performance lost

[Zich]

Super!
I wish I could see your nanos also mining at same host
You can clock a little bit more your A2 for 23 GH if you wish

The nano make CPU usage up to 90%  
Since i change the fan with less static air pressure, then i fear add more clock will make the chip too hot  

True CPU goes high but nothing to fear about I do have 7 hexa +2 nanos all working great without performance lost

I had unused pi so i let's the nano hashing there 
I also had android tablet with LCD problem, i will try to add linux & install cgminer. Then run all board there 

[mudge]

so has anyone got shipping info today, it being the last day of the month for December shipping?

My order still just shows as payment accepted.
I also notice that Technobit have not replyed to this thread for a while and have not replyed to my messages on there web site.

I realy am begining to wish I had not ordered these

[Destiffmast]

so has anyone got shipping info today, it being the last day of the month for December shipping?

My order still just shows as payment accepted.
I also notice that Technobit have not replyed to this thread for a while and have not replyed to my messages on there web site.

I realy am begining to wish I had not ordered these

No news on this end either, all I get is the same old

Date    Status
2013-11-28 15:50:25    Payment accepted......

[bestalg]

Happy New Year 2014

My wishes for you,

First get your order from Technobit

Great Mining start for Jan,

Love for Feb, peace for March,

No worries for April, fun for May,

Joy for June to Nov,

happiness for Dec.

and be sure to Change your Business in 31 of December.

Have a lucky and wonderful 2014 with a lot and a lot of Bitcoin

Bestalg

[/color]

[marto74]

Thank you for the good wishes.
We'll try to make it better for all our customers in the New 2014
Have a Happy New Year

[awgilyas]

so has anyone got shipping info today, it being the last day of the month for December shipping?

My order still just shows as payment accepted.
I also notice that Technobit have not replyed to this thread for a while and have not replyed to my messages on there web site.

I realy am begining to wish I had not ordered these

Yeah. Then again none are really shipping or with any better prices. :/

Had a bad taste of BFL delays before. I don't want that to repeat again. 

[sgrunger]

I was promised shipping within 7-10 business days when I placed my order on Nov 28th, WVVOPNUWT.
I was then promised by email that my order would ship by Dec 27th / 30th.

2 false hopes.
No tracking.
Ton of lost hashing.
FUN TIMES.