Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 01:57:02 AM Last edit: February 13, 2014, 02:17:49 AM by Zich |
|
My 24 GH/s HEX16A2 fully Assembled bitcoin miner (chips included) (Order No. CVMKAARFU) is not making half the hash rate, which should be reached (over clocked). What went wrong? HEXc 0: 1500 1100/1103mV | 11.00G/11.17Gh/s | A:1120 R:0 HW:21/2.05% WU:156.0/m With HexMiner 1.0.0.3 and this settings I also got a hash rate of a well over clocked 7 GH/s HEX16A miner... (avg ~8.78 Gh/s) That's extremely disappointing! All 16 chips get warm/hot and seem to be soldered well, the PSU is okay and I'm not using any router hardware with a web interface or any helpful "cgminer-api". Are there any schematics available? Does anyone have another idea or (much better) a solution for my issue? HEX16A can not OC that high. Unfortunately cgminer-api command only work on TPLINK TL-MR3020. I suggest you buy one on your local computer shop & flash it with latest image from technobit. It's pretty cheap. Then using cgminer-api we can determine whenever there is dead chip or not. The schematic available in opening page of this thread ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
mjniessen
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 07:26:36 AM |
|
HEX16A can not OC that high. Unfortunately cgminer-api command only work on TPLINK TL-MR3020. I suggest you buy one on your local computer shop & flash it with latest image from technobit. It's pretty cheap. Then using cgminer-api we can determine whenever there is dead chip or not.
That's what I'll do... Haven't found any working "per chip stats source code". The API of cgminer itself is delivering only totals. Didn't want to say "that IS a HEX16A" but "the preformance is more LIKE a HEX16A". The schematic available in opening page of this thread ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Ups... Cool! Thx!
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 07:30:36 AM |
|
HEX16A can not OC that high. Unfortunately cgminer-api command only work on TPLINK TL-MR3020. I suggest you buy one on your local computer shop & flash it with latest image from technobit. It's pretty cheap. Then using cgminer-api we can determine whenever there is dead chip or not.
That's what I'll do... Haven't found any working "per chip stats source code". The API of cgminer itself is delivering only totals. Didn't want to say "that IS a HEX16A" but "the preformance is more LIKE a HEX16A". The schematic available in opening page of this thread ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Ups... Cool! Thx! Dude, just click cgminer stats in your tplink and post it here much more easy thing compared to looking int6o source code
|
|
|
|
iFA88
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 10:26:45 AM |
|
I have ordered from the 30' piece hex8 with the better express shipping, this shipping was 46 euro. But my package is still in sofia soon 2 days. . Why is this express delivery? For more price i want much more speed ^^ i know very well that technobit cannot do anything with this, but i want answers. The shipping destination is hungary.
Shipment number: 60074379593 (DPD Parcel Label No: 16602410229650) Date Operation Settlement 2014-02-11 18:32:14 Courier Pick-up SOFIA 2014-02-11 19:23:32 Received in Office SOFIA * A delay in the shipment status update may be expected for international deliveries.
Before this i have hex8a2 ordered with regurar shipping and was 4day: Shipment number: 60067117726 (DPD Parcel Label No: 16602410220681) Date Operation Settlement 2014-01-10 17:34:22 Courier Pick-up SOFIA 2014-01-10 18:13:45 Received in Office SOFIA 2014-01-10 19:47:28 Processed in Office 0068-Sofia, BULGARIA 2014-01-13 08:27:17 Processed in Office 0066-Budapest, HUNGARY 2014-01-14 06:23:27 Arrival Scan 1657-Kapuvar, HUNGARY 2014-01-14 07:02:04 Out for Delivery 1657-Kapuvar, HUNGARY 2014-01-14 12:13:27 Delivered Recipient RAJCI 1657-Kapuvar, HUNGARY * A delay in the shipment status update may be expected for international deliveries
When the hex8 not arrive in this week, i fall from many btc..
|
|
|
|
mjniessen
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 10:57:32 AM |
|
Dude, just click cgminer stats in your tplink and post it here much more easy thing compared to looking int6o source code
Actually there is no "your tplink", but there will be one next week and THEN I will dedicate you my first click/cgminer-api output. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) What is more easier and what's not, depends in this case on my profession... I'm neighter a "clicker" nor a priest, who is seeing things that aren't there. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 11:01:43 AM |
|
Dude, just click cgminer stats in your tplink and post it here much more easy thing compared to looking int6o source code
Actually there is no "your tplink", but there will be one next week and THEN I will dedicate you my first click/cgminer-api output. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) What is more easier and what's not, depends in this case on my profession... I'm neighter a "clicker" nor a priest, who is seeing things that aren't there. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Ok. Just in case you missed that as far as i can see you are running custom build of cgminer Right? if yes ssh is familiar and cgminer api-listen also? If not something more than a copy paste of compile instructions is needed which is called tp-link. In any case a little bit of reading about cgminer in general is a good start Anyway type cgminer-api stats under ssh console. Is that hard?
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 12:16:53 PM |
|
I have ordered from the 30' piece hex8 with the better express shipping, this shipping was 46 euro. But my package is still in sofia soon 2 days. . Why is this express delivery? For more price i want much more speed ^^ i know very well that technobit cannot do anything with this, but i want answers. The shipping destination is hungary.
Shipment number: 60074379593 (DPD Parcel Label No: 16602410229650) Date Operation Settlement 2014-02-11 18:32:14 Courier Pick-up SOFIA 2014-02-11 19:23:32 Received in Office SOFIA * A delay in the shipment status update may be expected for international deliveries.
Before this i have hex8a2 ordered with regurar shipping and was 4day: Shipment number: 60067117726 (DPD Parcel Label No: 16602410220681) Date Operation Settlement 2014-01-10 17:34:22 Courier Pick-up SOFIA 2014-01-10 18:13:45 Received in Office SOFIA 2014-01-10 19:47:28 Processed in Office 0068-Sofia, BULGARIA 2014-01-13 08:27:17 Processed in Office 0066-Budapest, HUNGARY 2014-01-14 06:23:27 Arrival Scan 1657-Kapuvar, HUNGARY 2014-01-14 07:02:04 Out for Delivery 1657-Kapuvar, HUNGARY 2014-01-14 12:13:27 Delivered Recipient RAJCI 1657-Kapuvar, HUNGARY * A delay in the shipment status update may be expected for international deliveries
When the hex8 not arrive in this week, i fall from many btc..
Actually you can ask speedy the real status of your parcel. I ask them everyday ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
mjniessen
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 12:24:33 PM |
|
Ok. Just in case you missed that as far as i can see you are running custom build of cgminer Right? if yes ssh is familiar and cgminer api-listen also? If not something more than a copy paste of compile instructions is needed which is called tp-link. In any case a little bit of reading about cgminer in general is a good start Anyway type cgminer-api stats under ssh console. Is that hard?
That was helpfull... Here the output of cgminer-api stats. Ehm... I switched of the PSU yesterday and cgminer keept running, so don't wonder about [MHS av]. Chip 3 to 8 with Nonces = 0
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 12:27:17 PM |
|
Ok. Just in case you missed that as far as i can see you are running custom build of cgminer Right? if yes ssh is familiar and cgminer api-listen also? If not something more than a copy paste of compile instructions is needed which is called tp-link. In any case a little bit of reading about cgminer in general is a good start Anyway type cgminer-api stats under ssh console. Is that hard?
That was helpfull... Here the output of cgminer-api stats. Ehm... I switched of the PSU yesterday and cgminer keept running, so don't wonder about [MHS av]. Chip 3 to 8 with Nonces = 0 Bad... Try different voltage/clocks start with lower values. if chips still do not work the bard is not working then. Sorry to say that
|
|
|
|
mjniessen
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 12:35:46 PM |
|
Bad... Try different voltage/clocks start with lower values. if chips still do not work the bard is not working then. Sorry to say that
Did that already (0,9V 1000 Hz for example) without the "cgminer-api stats" and they seem not willing to work properly (chip 1+2) or even at all (chip 3-8).
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 12:39:24 PM |
|
Bad... Try different voltage/clocks start with lower values. if chips still do not work the bard is not working then. Sorry to say that
Did that already (0,9V 1000 Hz for example) without the "cgminer-api stats" and they seem not willing to work properly (chip 1+2) or even at all (chip 3-8). The best thing to do is to approach marto then. Do you have 12V molex connected i guess yes but it is just in case
|
|
|
|
mjniessen
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 12:51:12 PM |
|
Bad... Try different voltage/clocks start with lower values. if chips still do not work the bard is not working then. Sorry to say that
Did that already (0,9V 1000 Hz for example) without the "cgminer-api stats" and they seem not willing to work properly (chip 1+2) or even at all (chip 3-8). The best thing to do is to approach marto then. Do you have 12V molex connected i guess yes but it is just in case Yes, 12 volts are connected via molex. But there is a diode right next to the molex connector, which is not shown on pictures. I guess it is to prevent damage in case of swapping plus and ground... and I guess the diode is in the right direction, but I'll check that when I'm back home...
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 07:09:27 PM |
|
this actually is transil. to limit peeks from the PSU
|
|
|
|
Adamlm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 07:45:29 PM |
|
Sorry for the delay. You'll get your hosting setup tommorow Still no info from you... ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I'm getting really dissapointed ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Sorry, We were very busy. I'll try to sort this out this weekend --- Sorry for the delay. You'll get your hosting setup tommorow --- Marto74, my order has not been completed yet, it's an order for miner & hosting from early December. You promised here in public that it would be ready last week.
|
|
|
|
mjniessen
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 13, 2014, 08:07:30 PM |
|
this actually is transil. to limit peeks from the PSU
Okay... but half of the chips aren't working properly [Chip1 Nonces] => 242 [Chip2 Nonces] => 5 [Chip3 Nonces] => 0 [Chip4 Nonces] => 0 [Chip5 Nonces] => 0 [Chip6 Nonces] => 0 [Chip7 Nonces] => 0 [Chip8 Nonces] => 0 [Chip9 Nonces] => 1768 [Chip10 Nonces] => 1751 [Chip11 Nonces] => 969 [Chip12 Nonces] => 1748 [Chip13 Nonces] => 1769 [Chip14 Nonces] => 1774 [Chip15 Nonces] => 1857 [Chip16 Nonces] => 1848
Is there something I can check/fix before this board is going back for repair?
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 14, 2014, 09:15:39 AM |
|
this actually is transil. to limit peeks from the PSU
Okay... but half of the chips aren't working properly [Chip1 Nonces] => 242 [Chip2 Nonces] => 5 [Chip3 Nonces] => 0 [Chip4 Nonces] => 0 [Chip5 Nonces] => 0 [Chip6 Nonces] => 0 [Chip7 Nonces] => 0 [Chip8 Nonces] => 0 [Chip9 Nonces] => 1768 [Chip10 Nonces] => 1751 [Chip11 Nonces] => 969 [Chip12 Nonces] => 1748 [Chip13 Nonces] => 1769 [Chip14 Nonces] => 1774 [Chip15 Nonces] => 1857 [Chip16 Nonces] => 1848
Is there something I can check/fix before this board is going back for repair? I am afraid nothing else you can do.
|
|
|
|
cannachris
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 15, 2014, 02:52:03 AM |
|
OK I went to my bank and asked them to give me all possible information about the swift transaction. this is what they gave me: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fclelarge.home.xs4all.nl%2Fswift1.jpg&t=665&c=abXD9lgC1l-V3A) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fclelarge.home.xs4all.nl%2Fswift2.jpg&t=665&c=Wr0wBVwuPu8hWg) This is everything the bank has on the 581€ transaction for order BJJNEKBIM marto do you have enough information on the payment now???
|
|
|
|
WiWi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 83
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 15, 2014, 06:33:15 AM |
|
Hi all,
I am very satisfied, did order in december and its deliverd in february as agreed. The coming week it will arrive. Good job from technobit.
|
|
|
|
Adamlm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 15, 2014, 08:20:27 AM |
|
Hi all,
I am very satisfied, did order in december and its deliverd in february as agreed. The coming week it will arrive. Good job from technobit.
Lucky you, my order is from 2013-12-09 and still not completed ! IOEKQNSIS Marto, can you tell when it will be ready ??
|
|
|
|
tmu
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 15, 2014, 03:28:57 PM |
|
I finally got my boards hashing. Only problem I am having is that due my ISP i have to use dhcp and i am having difficulties to login to tplink. I can login when tplink is connected directly to my laptop and i can make settings, but when tplink is connected to swicht i can not connect to it. Any how hashing is showing up on my pools so everything seems to bee in order.
|
|
|
|
|