Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[Leahcim]

I have an unused LC-B250SFX 250W PSU power supplies, is this suitable to power a single Avalon2 HEX16A2?

+5 & +3.3 Combined 105
+5 & +3.3 & +12 Combined 235   
+12 16A peak

The option for compiling Avalon2 HEX16A2 driver is --enable-hexminera --enable-hexminerc , is true?
Now i try to use a thin client with linux but next week i was planning to buy a MR3020.

Thaks in advance Luca

--enable-hexminerc is enough
Made sure you pass to cgminer default-miner as c.you can read change log first

Confirm 
Unlike previous patch, on latest patch you can enable HEXC without HEXA.

with e447b697d90c4d1e4c6a2dc8bd9bfc3eab23115f i still have to use --enable-hexminera am i using the wrong patch?

That is the right patch. Did you get cgminer directly from git?

Code:

git clone https://github.com/ckolivas/cgminer.git

yes and patching worked fine. When the patch does not fit the cgminer source you normaly get errors while patching.

[1714130790]

1714130790

[1714130790]

1714130790

[1714130790]

1714130790

[1714130790]

1714130790

[Zich]

I have an unused LC-B250SFX 250W PSU power supplies, is this suitable to power a single Avalon2 HEX16A2?

+5 & +3.3 Combined 105
+5 & +3.3 & +12 Combined 235   
+12 16A peak

The option for compiling Avalon2 HEX16A2 driver is --enable-hexminera --enable-hexminerc , is true?
Now i try to use a thin client with linux but next week i was planning to buy a MR3020.

Thaks in advance Luca

--enable-hexminerc is enough
Made sure you pass to cgminer default-miner as c.you can read change log first

Confirm 
Unlike previous patch, on latest patch you can enable HEXC without HEXA.

with e447b697d90c4d1e4c6a2dc8bd9bfc3eab23115f i still have to use --enable-hexminera am i using the wrong patch?

That is the right patch. Did you get cgminer directly from git?

Code:

git clone https://github.com/ckolivas/cgminer.git

yes and patching worked fine. When the patch does not fit the cgminer source you normaly get errors while patching.

Ooops, sorry for wrong info. I forget that the problem occur on make command.

You are right, you still need to enable hexminera 
I will edit previous post 

[wolf_miner]

Hi, to power a single Avalon2 HEX16A2 is requested 12V + 5V  PSU power supplies or only 12V PSU?

Thanks in advance Luca

[ZBC3]

I burnt out one of the pins in my molex connector. Anybody know where to get a replacement molex connector for the board? Or maybe know an alternate way to power the board without the molex connector ?

[Zich]

Hi, to power a single Avalon2 HEX16A2 is requested 12V + 5V  PSU power supplies or only 12V PSU?

Thanks in advance Luca

You only need 12 V.
5V already provided by 5V regulator on HEX board.

I burnt out one of the pins in my molex connector. Anybody know where to get a replacement molex connector for the board? Or maybe know an alternate way to power the board without the molex connector ?

Just cut the wire from PSU & solder it to molex back pin   
You need 12 V only.

[ZBC3]

Thanks for the info again Zich. So I can solder the 12 v wire to the back of the molex connector? I assume the pin that burnt is where the 12 v line should be soldered. When you say back of molex, are you talking about the bottom of the board or on top of the board under the heat sink? As to the 12 v line, should I use molex connector, or should I cut one of the 12 v lines from the motherboard connector?

I fully understand that I, and I alone am responsible for alterations that may damage the device.

[Zich]

Thanks for the info again Zich. So I can solder the 12 v wire to the back of the molex connector? I assume the pin that burnt is where the 12 v line should be soldered. When you say back of molex, are you talking about the bottom of the board or on top of the board under the heat sink? As to the 12 v line, should I use molex connector, or should I cut one of the 12 v lines from the motherboard connector?

I fully understand that I, and I alone am responsible for alterations that may damage the device.

I mean on the opposite side of molex "pin". Check picture. Based on schematic, red arrow is 12 V, black arrow is GND. Compared it with your molex burn pin.
All my HEX board come with screw terminal so i can't really tell  

[ZBC3]

My board looks a little different as there is some kind of resister behind the molex, and mine has a 2 pin screw down, not 3 like the picture (probably doesn't make a difference just noting it).

[ZBC3]

Is the angled side of the molex on the top or bottom of the board as shown in the picture?

[Zich]

My board looks a little different as there is some kind of resister behind the molex, and mine has a 2 pin screw down, not 3 like the picture (probably doesn't make a difference just noting it).

Sorry, this picture is early development board. I take it from OP since i don't own HEX board with molex 
The additional component add later while HEX16C gone to production.
So you can solder the PSU 12V to that additional component  

[chiefstank]

anyone know why with hexminer 1.0.0.3 i cannot increase the voltage above 1.000?

[Zich]

anyone know why with hexminer 1.0.0.3 i cannot increase the voltage above 1.000?

You should be able to increase the voltage when the miner already connected to your PC & set right port.

[chiefstank]

anyone know why with hexminer 1.0.0.3 i cannot increase the voltage above 1.000?

You should be able to increase the voltage when the miner already connected to your PC & set right port.

definitely can't increase no matter what. tried having just one miner, tried increasing when running, when not running. 1.0.0.2 works, but freezes constantly and starts rejecting everything.

[Zich]

anyone know why with hexminer 1.0.0.3 i cannot increase the voltage above 1.000?

You should be able to increase the voltage when the miner already connected to your PC & set right port.

definitely can't increase no matter what. tried having just one miner, tried increasing when running, when not running. 1.0.0.2 works, but freezes constantly and starts rejecting everything.

That's weird. Maybe you can try latest version http://www.megafileupload.com/en/file/498738/hexminer-A1-rar.html

[loshia]

anyone know why with hexminer 1.0.0.3 i cannot increase the voltage above 1.000?

You should be able to increase the voltage when the miner already connected to your PC & set right port.

definitely can't increase no matter what. tried having just one miner, tried increasing when running, when not running. 1.0.0.2 works, but freezes constantly and starts rejecting everything.

In the end consider a tplink host for mining and forget

[chiefstank]

anyone know why with hexminer 1.0.0.3 i cannot increase the voltage above 1.000?

You should be able to increase the voltage when the miner already connected to your PC & set right port.

definitely can't increase no matter what. tried having just one miner, tried increasing when running, when not running. 1.0.0.2 works, but freezes constantly and starts rejecting everything.

That's weird. Maybe you can try latest version http://www.megafileupload.com/en/file/498738/hexminer-A1-rar.html

thanks, but this doesn't work at all.

[Zich]

anyone know why with hexminer 1.0.0.3 i cannot increase the voltage above 1.000?

You should be able to increase the voltage when the miner already connected to your PC & set right port.

definitely can't increase no matter what. tried having just one miner, tried increasing when running, when not running. 1.0.0.2 works, but freezes constantly and starts rejecting everything.

That's weird. Maybe you can try latest version http://www.megafileupload.com/en/file/498738/hexminer-A1-rar.html

thanks, but this doesn't work at all.

Then use this version https://www.dropbox.com/s/qhmb87ynu93gkf7/HEXMiner1.0.0.3E.rar
It's copied from my PC.

Ok, just edit HEXMiner.ini.
Change true to false one line before voltage setting(1000)

[chiefstank]

anyone know why with hexminer 1.0.0.3 i cannot increase the voltage above 1.000?

You should be able to increase the voltage when the miner already connected to your PC & set right port.

definitely can't increase no matter what. tried having just one miner, tried increasing when running, when not running. 1.0.0.2 works, but freezes constantly and starts rejecting everything.

That's weird. Maybe you can try latest version http://www.megafileupload.com/en/file/498738/hexminer-A1-rar.html

thanks, but this doesn't work at all.

Then use this version https://www.dropbox.com/s/qhmb87ynu93gkf7/HEXMiner1.0.0.3E.rar
It's copied from my PC.

Ok, just edit HEXMiner.ini.
Change true to false one line before voltage setting(1000)

i appreciate your help, but here's my .ini... where do i change it?

Configuration
1
0
0
1370
657
False
True
True
True
False
True
[Pool]
http://localhost:8332
http://btcguild.com:8332
http://mining.eligius.st:8337
[PoolIndex]
0
[UserName]
hex16a_2
hex16aa_1
hex16a_3
hex16a_Avalon2Test
hex16a_Mitko
hex16a_CCA1Test
[UserNameIndex]
5
[Password]
1
1
[PasswordIndex]
1
[StratumConverterOptions]
-o eu-stratum.btcguild.com -p 3333
-o stratum.mining.eligius.st -p 3334
[StratumConverterOptionsIndex]
0
2
1,000
250
True
60

[Zich]

i appreciate your help, but here's my .ini... where do i change it?

Configuration
1
0
0
1370
657
False
True
True
True
False
True
[Pool]
http://localhost:8332
http://btcguild.com:8332
http://mining.eligius.st:8337
[PoolIndex]
0
[UserName]
hex16a_2
hex16aa_1
hex16a_3
hex16a_Avalon2Test
hex16a_Mitko
hex16a_CCA1Test
[UserNameIndex]
5
[Password]
1
1
[PasswordIndex]
1
[StratumConverterOptions]
-o eu-stratum.btcguild.com -p 3333
-o stratum.mining.eligius.st -p 3334
[StratumConverterOptionsIndex]
0
2
1,000
250
True
60

Your ini is for latest version that support HEX8 which don't had the true false value. I didn't had any trouble change the value like previous version.
But you can try edit ini file but make sure you save it as ini not txt.

....
[StratumConverterOptionsIndex]
0
2
1,100
1500
True
60

[techman05]

Hi,

  I just got one of these boards and can't seem to get it to connect to a pool. Right now I wanted to try btcguild since it was in the list for the hex software but I just keep getting a timeout error in the proxy. I set up the firewall to make sure I had access to the internet  but it still says no connection to the internet. I've tried it without and at least I get debug data that its doing something but btc guild shows nothing going on.

I have the drivers to which I think I'm supposed to have and seemed to have a positive connection in the test tab.

Is there a newer version of the hex software that does stratum without the proxy? I have the 1.0.0.3

Thanks