bobymoore
Newbie
Offline
Activity: 61
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2019, 08:29:59 AM |
|
Can someone give me a .bat file to auto start this hole machine. Cant figure how to.
There is no batch file, I mean all you have to do is to put only your wallet number in the batch, after that in red team miner always you have to run the program as administrator, so right click to the exe-compatibility-run this program as administrator-apply-OK and after that you have to run your batch and play with mem tweak....
|
|
|
|
Iamtutut
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2019, 09:52:12 AM |
|
I would very much appreciate to get mem timings for RX570s (have both Samsung and Hynix/Elpida memories).
I can't report those from my former modded bioses, I had a huge crash (had to reinstall windows 10) and I'm now running on stock bioses. Anyways, I don't know what figures to write and where. I've lost 800H/s cumulated on CNR without the modded bios timings.
Thanks in advance for any help.
|
|
|
|
Miner Addict
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2019, 01:43:09 PM |
|
I made a good set up for my two vega 56@64,i get 2350 hash each, but my pc lag, stuck when I do anything even when I move mouse, I use red team miner, the amd mem tweak tool, win 10 pro 64,drivers 19.4.1,19.42.
what's your setup, can you share it, and what card you own? https://i.postimg.cc/zBn5cN3N/Untitled1.pnghappy mining my friend!thanks to Eviolp! Wow excellent Watt at the wall and GPU Z/ hwinfo ?
|
|
|
|
QuirkSilver
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 80
Merit: 13
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2019, 03:41:33 PM |
|
Slight problem here, anyone runs this with polaris? I try to do basic changes to tRRD nothing changes (latest gui) i use 18.6.1 cause thats the latest favoured for polaris mining. However, i can try 19.xx drivers, not sure if TRD/JCE/SRB will like yhat though. By the way, polaris is still unoptimized even with one click... I believe the author and a select few around know how to properly tweak gddr5 for specific algos.. Cryptonight is still really rewarding with proper timings as in 5-15% gains compared to best one click... Besides, too tight lower strap copy will sooner or later damage ram to a accept less frequency. I cant think of any VEGA based GPU while my own mix of polaris is ridiculously cheap in comparison, 4gb 570 here is around 90$! Until now as well 4mb scratchpad gives higher memory polaris a distinctive advantage. (my 2 cents) Elvovivipiii we love you btw And that eth pill, isnt that miner girl? The one behind the acorn destruction? Cause i was fooled into those may 2018 vids as did thousand other idiots.
|
|
|
|
nahoi
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2019, 04:25:14 PM |
|
was your card already modded? how do i imput in simple mining this? i seea here most of people have vega card what about us with 480 and 570 cards?
|
|
|
|
ManDoneKTM
Newbie
Offline
Activity: 150
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2019, 08:01:17 PM |
|
was your card already modded? how do i imput in simple mining this? i seea here most of people have vega card what about us with 480 and 570 cards? LOL , do you consider its 31 mhs ok for that card ?! i have 3 480 and all are mining at 32.4 mhs . LOL .
|
|
|
|
P00P135
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2019, 08:22:00 PM |
|
was your card already modded? how do i imput in simple mining this? i seea here most of people have vega card what about us with 480 and 570 cards? rx480 8 gb, Happy mining! ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2FgJ8ZQJDm%2Frx480amdtweak.png&t=665&c=Wij_W651-Bsmqw) LOL , do you consider its 31 mhs ok for that card ?! i have 3 480 and all are mining at 32.4 mhs . LOL . Most people with 4XX 5XX are fine with 29-31 Mhs because to push higher you need to use more power which isn't worth. Finding the perfect hash to watt ratio is better in this current mining climate.
|
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2019, 07:59:36 AM |
|
Gonna see same nice fried Vega )) Add some fan speed ))
|
|
|
|
kwejk
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2019, 08:11:41 AM |
|
Gonna see same nice fried Vega )) Add some fan speed )) Fanspeed is visible in CPU-Z. 90%, 4500 PRM. So it looks good to me. Just not seen in the tweak tool for some reason. Are you using Vega64 BIOS?
|
|
|
|
fb23aa
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2019, 12:40:58 PM |
|
was your card already modded? how do i imput in simple mining this? i seea here most of people have vega card what about us with 480 and 570 cards? LOL , do you consider its 31 mhs ok for that card ?! i have 3 480 and all are mining at 32.4 mhs . LOL . Why don't you share with us your timings, that would be constructive...
|
|
|
|
keksik
Jr. Member
Offline
Activity: 169
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2019, 03:26:57 PM |
|
was your card already modded? how do i imput in simple mining this? i seea here most of people have vega card what about us with 480 and 570 cards? rx480 8 gb, Happy mining! ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2FgJ8ZQJDm%2Frx480amdtweak.png&t=665&c=Wij_W651-Bsmqw) LOL , do you consider its 31 mhs ok for that card ?! i have 3 480 and all are mining at 32.4 mhs . LOL . Most people with 4XX 5XX are fine with 29-31 Mhs because to push higher you need to use more power which isn't worth. Finding the perfect hash to watt ratio is better in this current mining climate. 1150Mhz core at 1150mV, isnt that too much? whats is best value? im using 850mV and when not stable lowering to 1120Mhz. whats it proper voltage for 1200Mhz core?
|
|
|
|
Markyz23
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2019, 05:03:08 PM |
|
Hei.
Anybody used this tool on RX 570 4GB?
I have a bunch of them and was playing around a little but not quite sure what to change. Would be nice to hear what i should change and what to leave alone so i don't mess anything up.
Thanks:)
|
|
|
|
Eliovp (OP)
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2019, 06:15:15 PM |
|
im running into the issue with my vega 64's . I'm using 18.6.1 driver on srbminer because you "cant" use the updated drivers but the Tweaker tool gui needs new drivers can someone explain. Do i just use pixel patcher and update the drivers and srbminer to newest? to then beable to use the lastest Tweaker tool? I was seeing my voltage changing up and down in the old tool going from 900-1100. Is that because of old drivers? And now the tweaker tool wont open.
The GUI version first checks if the installed driver has support for the overdrive functions in the tool, if not, in theory, you should just see empty space where all the clock control is. Or.. an error message.. ![Embarrassed](https://bitcointalk.org/Smileys/default/embarrassed.gif) As stated before, to solve that, update drivers to 19.4.*, a lot of earlier versions will work as well. As long as the overdrive API is supported. If that all still doesn't work, there's still the CLI version you can download and run. It's purely written for timing modifications and nothing else. Hei.
Anybody used this tool on RX 570 4GB?
I have a bunch of them and was playing around a little but not quite sure what to change. Would be nice to hear what i should change and what to leave alone so i don't mess anything up.
Thanks:)
Try to work with small steps. things such as tRFC, drop those slightly, benchmark for a bit, do this in steps until your GPU crashes, then just revert back to latest working modifications. This will already give you an increase. Have fun! Cheers
|
|
|
|
Markyz23
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2019, 06:47:18 PM |
|
im running into the issue with my vega 64's . I'm using 18.6.1 driver on srbminer because you "cant" use the updated drivers but the Tweaker tool gui needs new drivers can someone explain. Do i just use pixel patcher and update the drivers and srbminer to newest? to then beable to use the lastest Tweaker tool? I was seeing my voltage changing up and down in the old tool going from 900-1100. Is that because of old drivers? And now the tweaker tool wont open.
The GUI version first checks if the installed driver has support for the overdrive functions in the tool, if not, in theory, you should just see empty space where all the clock control is. Or.. an error message.. ![Embarrassed](https://bitcointalk.org/Smileys/default/embarrassed.gif) As stated before, to solve that, update drivers to 19.4.*, a lot of earlier versions will work as well. As long as the overdrive API is supported. If that all still doesn't work, there's still the CLI version you can download and run. It's purely written for timing modifications and nothing else. Hei.
Anybody used this tool on RX 570 4GB?
I have a bunch of them and was playing around a little but not quite sure what to change. Would be nice to hear what i should change and what to leave alone so i don't mess anything up.
Thanks:)
Try to work with small steps. things such as tRFC, drop those slightly, benchmark for a bit, do this in steps until your GPU crashes, then just revert back to latest working modifications. This will already give you an increase. Have fun! Cheers Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?
|
|
|
|
Eliovp (OP)
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 09, 2019, 01:42:14 PM |
|
Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?
You're welcome. You have to apply the values again yes. See this as a positive thing ;-) Cheers!
|
|
|
|
Iamtutut
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 09, 2019, 03:03:39 PM |
|
Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?
You're welcome. You have to apply the values again yes. See this as a positive thing ;-) Cheers! Thanks to your advice of playing with "tRFC" (along with Timing Level 2 setting) I've got a boost on CN-R, CN waltz and CN soft shell. I've got stable GPUs. What other values are better to change after this 1st step please ? Thanks !
|
|
|
|
ganzocrypt
Newbie
Offline
Activity: 162
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 09, 2019, 03:38:50 PM |
|
Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?
You're welcome. You have to apply the values again yes. See this as a positive thing ;-) Cheers! Thanks to your advice of playing with "tRFC" (along with Timing Level 2 setting) I've got a boost on CN-R, CN waltz and CN soft shell. I've got stable GPUs. What other values are better to change after this 1st step please ? Thanks ! Can you share some of those tRFC settings, it will give me an idea where to start on RX580s. Thx
|
|
|
|
Iamtutut
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 09, 2019, 03:49:52 PM |
|
Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?
You're welcome. You have to apply the values again yes. See this as a positive thing ;-) Cheers! Thanks to your advice of playing with "tRFC" (along with Timing Level 2 setting) I've got a boost on CN-R, CN waltz and CN soft shell. I've got stable GPUs. What other values are better to change after this 1st step please ? Thanks ! Can you share some of those tRFC settings, it will give me an idea where to start on RX580s. Thx All GPUs are RX574 120 for Samsung memory. 125 for weak GPU with Elpida/Hynix 105 (stock value) for my Sapphire ITX (Elpida/Hynix) EDIT: these are timings for CN Soft Shell (Turtlecoin).
|
|
|
|
clousian
Newbie
Offline
Activity: 33
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 09, 2019, 08:19:43 PM |
|
Thank you for some directions. Now it's time to play with that. One question though: I use the GUI. What happens after system restart or gpu crash? Everything stays the same or do i have to apply the values again?
You're welcome. You have to apply the values again yes. See this as a positive thing ;-) Cheers! Thanks to your advice of playing with "tRFC" (along with Timing Level 2 setting) I've got a boost on CN-R, CN waltz and CN soft shell. I've got stable GPUs. What other values are better to change after this 1st step please ? Thanks ! Can you share some of those tRFC settings, it will give me an idea where to start on RX580s. Thx All GPUs are RX574 120 for Samsung memory. 125 for weak GPU with Elpida/Hynix 105 (stock value) for my Sapphire ITX (Elpida/Hynix) EDIT: these are timings for CN Soft Shell (Turtlecoin). So you pushed your tRFC values up for your RX570's. I thought we were suppose to lower them slowly?
|
|
|
|
|