mononova
Newbie
Offline
Activity: 5
Merit: 1
|
|
July 18, 2019, 05:09:35 PM |
|
Thank you, buddy, but still 43,5. Seems my PowerColor cards are shit.
I´m sorry Has anyone specs for a RADEON VII?
|
|
|
|
livada
Newbie
Offline
Activity: 417
Merit: 0
|
|
July 19, 2019, 07:41:32 PM Last edit: July 19, 2019, 07:57:20 PM by livada |
|
My Vega 56's (flashed to 64) are happily chugging XMR @ 2340 h/s each.
pls send your all setings for this HR with vega 56 Samsung. Mem tweek? Int TMR ? Clock and mv? how meny power use your vega with this setings form the wall? thx my samsung vega give 2360hr when it's cold but now when it's warm I have a problem with them
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
July 20, 2019, 04:57:05 AM |
|
Interesting ...
Are settings still available (maybe a table of settings) for older cards - specifically GigaByte 7970/280X OC cards?
#crysx
|
|
|
|
MarioCapuzzo
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 21, 2019, 01:23:01 PM |
|
Hello Would it be possible to convert the current settings back to a timing strap? (so we can put it inside a bios file and make it permanent) It could be even just a location reference, like "tREF is located in the x-th byte inside the timing strap". Btw, really a nice app I'm tweaking the hell out of my GPU.
|
|
|
|
mariano_quilmes
Newbie
Offline
Activity: 10
Merit: 0
|
|
July 26, 2019, 12:15:44 PM |
|
Hello, can I ask if somebody has a good memory strap for Hynix chips for RX 480 and 580? Because I am testing some but they are throwing tons of memory gpu errors in HWInfo. I am getting only speeds of 1900 Mhz without memory errors.
I am testing for H5GC4H24AJ as well as H5GQ8H24MJ chips.
Regards.
Mariano.
|
|
|
|
Eliovp (OP)
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
|
July 27, 2019, 11:46:20 AM |
|
Hello Would it be possible to convert the current settings back to a timing strap? (so we can put it inside a bios file and make it permanent) It could be even just a location reference, like "tREF is located in the x-th byte inside the timing strap". Btw, really a nice app I'm tweaking the hell out of my GPU. Yes, i've implemented this into the Extended XL version. Check OP for more info Link: HereCheers!
|
|
|
|
UnclWish
|
|
July 27, 2019, 12:12:47 PM |
|
Hello Would it be possible to convert the current settings back to a timing strap? (so we can put it inside a bios file and make it permanent) It could be even just a location reference, like "tREF is located in the x-th byte inside the timing strap". Btw, really a nice app I'm tweaking the hell out of my GPU. Yes, i've implemented this into the Extended XL version. Check OP for more info Link: HereCheers! It's very good! Only two questions: 1. Did you plan to sign your custom driver to run tool in usual not test mode? 2. Can you make use of tool in nontest mode with use driver IOMap for only changing timining like in non XL version?
|
|
|
|
Eliovp (OP)
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
|
July 27, 2019, 01:13:45 PM |
|
Hello Would it be possible to convert the current settings back to a timing strap? (so we can put it inside a bios file and make it permanent) It could be even just a location reference, like "tREF is located in the x-th byte inside the timing strap". Btw, really a nice app I'm tweaking the hell out of my GPU. Yes, i've implemented this into the Extended XL version. Check OP for more info Link: HereCheers! It's very good! Only two questions: 1. Did you plan to sign your custom driver to run tool in usual not test mode? 2. Can you make use of tool in nontest mode with use driver IOMap for only changing timining like in non XL version? 1. I'd need a signed certificate for that. Not expensive, not "that" easy to aquire. 2. Can't you just use Non xl version then? Cheers
|
|
|
|
MarioCapuzzo
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 27, 2019, 04:37:11 PM |
|
Yes, i've implemented this into the Extended XL version.
Nice My question had perfect timing xD Btw I think that for this kind of program, Fernando (from the Win-Raid forum) might be more than happy to sign the driver for you, or even ToastyX from the monitortest.com forum (with a code review first oc). Of course I know nothing about what they could think... but IMO they might find the program interesting.
|
|
|
|
UnclWish
|
|
July 27, 2019, 08:07:34 PM |
|
Hello Would it be possible to convert the current settings back to a timing strap? (so we can put it inside a bios file and make it permanent) It could be even just a location reference, like "tREF is located in the x-th byte inside the timing strap". Btw, really a nice app I'm tweaking the hell out of my GPU. Yes, i've implemented this into the Extended XL version. Check OP for more info Link: HereCheers! It's very good! Only two questions: 1. Did you plan to sign your custom driver to run tool in usual not test mode? 2. Can you make use of tool in nontest mode with use driver IOMap for only changing timining like in non XL version? 1. I'd need a signed certificate for that. Not expensive, not "that" easy to aquire. 2. Can't you just use Non xl version then? Cheers 1. I hope that you will aquire a signed certificate and sign driver.... 2. This is what I doing now ))) But want to use XL version in future without test mode. Anyway, great work! Thank you!
|
|
|
|
Eliovp (OP)
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
|
July 28, 2019, 11:49:09 AM |
|
1. I hope that you will aquire a signed certificate and sign driver....
2. This is what I doing now ))) But want to use XL version in future without test mode.
Anyway, great work! Thank you!
We'll, see, maybe some good samaritan will offer to solve that Anyhow, just published a new release which fixes the startup bug. HereCheers!
|
|
|
|
UnclWish
|
|
July 28, 2019, 04:50:38 PM |
|
1. I hope that you will aquire a signed certificate and sign driver....
2. This is what I doing now ))) But want to use XL version in future without test mode.
Anyway, great work! Thank you!
We'll, see, maybe some good samaritan will offer to solve that Anyhow, just published a new release which fixes the startup bug. HereCheers! I know that Claymore signs it's driver. Maybe he can help?
|
|
|
|
adisonu
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 30, 2019, 08:17:31 AM |
|
Hey all,
I'm mining ETH with PowerColor Red Devil Vega56 with Hynix memory, but can't get out then more than 43,6 MH per card. BIOS is not modified. Here are my tests:
39,3MH/s: --RAS 22 --RCDRD 17 --RCDWR 4 --RC 35 --RP 13 --RRDS 4 --RRDL 4 --RFC 148 --REF 15600 39,8MH/s: --RAS 24 --RCDRD 19 --RCDWR 4 --RC 35 --RP 13 --RRDS 4 --RRDL 5 --RFC 148 --REF 15600 40,2MH/s: --RAS 24 --RCDRD 19 --RCDWR 4 --RC 35 --RP 14 --RRDS 4 --RRDL 5 --RFC 148 --REF 15600 43,5MH/s (also similar hashrate if Claymore miner used with strap 1 and rxboost): --RAS 24 --RCDRD 24 --RCDWR 26 --RC 36 --RP 13 --RRDS 1 --RTR 6 --CL 19 --RRDL 1 --RDDATA 22 --FAW 12 --RFC 196 --REF 65535 40,6MH/s: --RAS 24 --RCDRD 19 --RCDWR 4 --RC 35 --RP 14 --RRDS 4 --RRDL 5 --RFC 148 --REF 65535
My OVNT settings:
GPU_P7=1523;910 Mem_P3=925;875 power limit is 0. PPT patched.
GPU-only power draw is 150-160W.
Any ideas how can I get more out of them?
Hi, Maybe my settings works better for you. My cards the same as yours, hynix memory. https://imgur.com/a/bq1FXilHope this helps, Cheers
|
|
|
|
jeca
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 31, 2019, 02:42:09 PM |
|
Hello Would it be possible to convert the current settings back to a timing strap? (so we can put it inside a bios file and make it permanent) It could be even just a location reference, like "tREF is located in the x-th byte inside the timing strap". Btw, really a nice app I'm tweaking the hell out of my GPU. Yes, i've implemented this into the Extended XL version. http://eliovp.com/RX480.pngCheck OP for more info Link: HereCheers! Hello, Eliovp! I was happy to be able to apply the changes made by Memtweak to the strap. I made a change in the REF of an RX470 4gb and clicked on ">>" to generate the strap. I changed the strap on bios and flashed on RX. The hash dropped from 29 to 17mhs in Ethash. Is there anything to note besides changing the parameter and clicking ">>"? See the generated strap: Elpida: 777000000000000022AA1C10315A5436A0550F15B6191B0620550F117C041420CA8980A9000004C 00C09141734161D0B Samsung: 777000000000000022CC1C10AD615C41C0590E152ED88D0840590E110B031420FA8900A00300000 008091922651C220D
|
|
|
|
UnclWish
|
|
July 31, 2019, 02:45:18 PM |
|
Hello Would it be possible to convert the current settings back to a timing strap? (so we can put it inside a bios file and make it permanent) It could be even just a location reference, like "tREF is located in the x-th byte inside the timing strap". Btw, really a nice app I'm tweaking the hell out of my GPU. Yes, i've implemented this into the Extended XL version. Check OP for more info Cheers! Hello, Eliovp! I was happy to be able to apply the changes made by Memtweak to the strap. I made a change in the REF of an RX470 4gb and clicked on ">>" to generate the strap. I changed the strap on bios and flashed on RX. The hash dropped from 29 to 17mhs in Ethash. Is there anything to note besides changing the parameter and clicking ">>"? See the generated strap: Elpida: 777000000000000022AA1C10315A5436A0550F15B6191B0620550F117C041420CA8980A9000004C 00C09141734161D0B Samsung: 777000000000000022CC1C10AD615C41C0590E152ED88D0840590E110B031420FA8900A00300000 008091922651C220D REF didn't exists in memory straps.
|
|
|
|
jeca
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 31, 2019, 03:09:24 PM |
|
Hello Would it be possible to convert the current settings back to a timing strap? (so we can put it inside a bios file and make it permanent) It could be even just a location reference, like "tREF is located in the x-th byte inside the timing strap". Btw, really a nice app I'm tweaking the hell out of my GPU. Yes, i've implemented this into the Extended XL version. Check OP for more info Cheers! Hello, Eliovp! I was happy to be able to apply the changes made by Memtweak to the strap. I made a change in the REF of an RX470 4gb and clicked on ">>" to generate the strap. I changed the strap on bios and flashed on RX. The hash dropped from 29 to 17mhs in Ethash. Is there anything to note besides changing the parameter and clicking ">>"? See the generated strap: Elpida: 777000000000000022AA1C10315A5436A0550F15B6191B0620550F117C041420CA8980A9000004C 00C09141734161D0B Samsung: 777000000000000022CC1C10AD615C41C0590E152ED88D0840590E110B031420FA8900A00300000 008091922651C220D REF didn't exists in memory straps. Ohhh i don't suspected... thanks...
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
July 31, 2019, 11:33:14 PM Last edit: August 01, 2019, 06:39:50 PM by WhackOBill |
|
With the new XL version, I can only occasionally update the the values on the fly. Most often not. The added tools are nice to have though. My system always fails to read the injected strap ... pops and error dialog box to that effect.
I still regret moving to Win10 1903 as I think that's what took away my ability to modify things real-time, while Claymore is running.
You probably need an option or button to revert out of test mode. Obviously, you can flip into test mode if you don't detect it running but then there's no automated way back out in the XL Win tool.
Edit:
bcdedit /set TESTSIGNING OFF
just in case someone was looking for it.
|
|
|
|
Eliovp (OP)
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
|
August 01, 2019, 07:28:50 PM |
|
With the new XL version, I can only occasionally update the the values on the fly. Most often not. The added tools are nice to have though. My system always fails to read the injected strap ... pops and error dialog box to that effect.
I still regret moving to Win10 1903 as I think that's what took away my ability to modify things real-time, while Claymore is running.
You probably need an option or button to revert out of test mode. Obviously, you can flip into test mode if you don't detect it running but then there's no automated way back out in the XL Win tool.
Edit:
bcdedit /set TESTSIGNING OFF
just in case someone was looking for it.
I've tried to recreate your problem with the straps not injecting .. Just to be clear here, you can only inject a strap at the selected frequency. So if you're currently running your memory at 1900 Mh and you do a modification/strap injection for freq 2000, you're not going to notice any differences. However, that doesn't mean that you should get those error messages. It's the driver that fails to inject the strap. Probably something to do with Claymore's driver Button to turn test mode off has been added to latest release As well as NAVI10 support Only Strap injection and Power Play support (read from vbios/registry and write to registry for now) Latest versionCheers!
|
|
|
|
himiwop
Newbie
Offline
Activity: 1
Merit: 0
|
|
August 02, 2019, 09:26:41 AM |
|
Cant find CoreControl and MemoryControl Command line options for windows batch file,tried almost every option eg. GPU_P0 853;800;0 GPU_P1=991;800;0 GPU_P2=1084;800;0 GPU_P3=1138;800;0 GPU_P4=1150;800;0 GPU_P5=1202;800;0 GPU_P6=1407;800;0 GPU_P7=1407;875 Mem_P0=167;900;0 Mem_P1=500;900;0 Mem_P2=800;900;0 Mem_P3=875;900 Is there an option to modify/disable/enable theses P-states with commands under windows batch?
|
|
|
|
maximus63
Newbie
Offline
Activity: 13
Merit: 0
|
|
August 05, 2019, 08:19:26 AM |
|
Please! Add feature to control Core voltage and mem P states from BAT!!!
For example:
....WinAMDTweak.exe --i 0,1,2 --RAS 17 --RCDRD 15 --RCDWR 4 --RC 34 --RP 12 --rtp 4 --faw 12 --REF 15600 --CoreP7 1407 --CoreP7V 875
or
start.bat ->
....WinAMDTweak.exe --i 0,1 --load mySettings1.xml ....WinAMDTweak.exe --i 2 --load mySettings2.xml
|
|
|
|
|