Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 31, 2015, 06:26:18 AM |
|
There is a rumor that S4+ will soon be available. Dear BITMAIN, we want (and need) new chips. New miners. Not polished old hardware like S3++, S4+... p.s. and please don't forget about S2 uprade kits. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) Any more details on this rumor?
|
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 31, 2015, 09:39:04 AM |
|
Same junk PSU and fans? And trashy firmware that doesn't work properly with p2pool or shorter alt coins, and keeps the fans running way too fast? I'll pass thank you. M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
nokati
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 31, 2015, 10:11:34 AM |
|
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 31, 2015, 10:33:22 AM |
|
if we compare it to s5, it doesn't seems good at all we have 2.6 tera vs 1155 gh/s, and 1500w vs 590 so 2.25 ratio vs 2.5 ratio, there is a loss of 0.25 ratio in hashing, which is about 288 gh/s lost...
|
|
|
|
|
abracadabra
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 01, 2015, 12:40:15 AM |
|
At 55CFM I don't think that fan moves anywhere near enough air to call it a replacement for the existing S4 fans. Think you need something in the vicinity of 300 CFM. And at $30USD I'd think you could do better by going with a Delta. JMHO.
|
|
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 01, 2015, 02:06:11 AM |
|
Something must went wrong. Can you try to reflash the firmware?
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 02, 2015, 05:59:21 PM |
|
Does anyone know where the temperature sensor is on an S4 hash board?
|
|
|
|
|
Cyper_BLC
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 490
Merit: 270
Reverse Engineer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 02, 2015, 11:31:24 PM |
|
Does anyone know where the temperature sensor is on an S4 hash board?
there are 2 types of s4 hash board, which one is yours? put your board pic in here and i will show you temp.sensor is where. or you can find well with fine look LM75A 8pin SMD ic. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
For donations : 1CYPERv5yZ4c9FRzPyCz5u8vhttyKmVkto Emeğe Saygı Göstermeyenler, BECERIKSIZ kişilerdir.
|
|
|
Kexkey
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 237
Merit: 100
Smile while thinking.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 03, 2015, 12:20:43 AM |
|
Speaking of dust, I bought 2 used S4s this week from someone local in Montreal who was running 16 S4s in a "data center". I've never seen more disgusting hardware in my life! Dirt was literally baked on everything, the picture doesn't really do it justice especially since the top of the hash boards were the cleanest part. Take a look: Pre-cleaning (middle and bottom were much worse): https://i.imgur.com/RUyQBlH.jpgAfter cleaning and installing a proper replacement PSU: https://i.imgur.com/e1xsEde.jpgAnd now she's purring: https://i.imgur.com/WgjcaKB.pngI wish I would have weighed the S4 before and after cleaning. No kidding, there must have been a pound of dirt and filth in there. I'd love to see where this person is running their machines. This unit actually had a huge defect, BITMAIN used a wrong nut and one of the 12v connections on a lower hash board was completely loose. It barely even touched the bolt's threads, slipping right off when trying to tighten it. I've never seen this nut before in an S4, so some asshole at BITMAIN's assembly line was too fucking lazy to get off his ass and fetch a proper nut right before he finished his shift on a Friday night. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) The wire's terminal was completely charred along with the nut and washer, the rubber insulation almost completely melted away, and the hash board looks damaged but works fine as far as I can tell. I don't know why I didn't take pics, but I still have the charred connector on the PSU if anyone wants a look. I'm putting the blame on BITMAIN since, judging by the sorry state the S4 was in when I got it, the previous owner had never bothered to open it up. Amusingly, somehow both units PSUs still worked even though they were stuffed with dirt/dust. Pretty funny considering I run my other S4s in a clean environment with very little dust, and I've had 4 out of 5 PSUs die on me. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) Edit: Just noticed that you can see the charred washer in the second picture, beside the screw driver's handle. Hi Prelude, What is your PSU? I have a few PSU's here but they have PCI-e connectors. Do you know how I can convert the wires to connect to the screws in that series of S4? Is it as simple as cutting the wire and screw it directly on the board? Thanks!
|
This digital signature is not a digital signature.
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 03, 2015, 01:50:58 PM |
|
Will the S4 take 240V in?
Yes. Does anyone know where the temperature sensor is on an S4 hash board?
there are 2 types of s4 hash board, which one is yours? put your board pic in here and i will show you temp.sensor is where. or you can find well with fine look LM75A 8pin SMD ic. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) There's actually 3 that I know about, 1 is PCI-e version, next is nut/bolt version, and the last is a screw down terminal. I don't have pictures on hand, but thanks for telling me what to look for. The reason I ask, is that I have reversed the fans in My S4s, so that exhaust is in front of the S4 (where the screen is) and now I'm probably over cooling the temperature chip and getting a false reading of the actual board temps. I'll have to do some testing to be sure, but I might have to put them back as they were originally and just have the S4s sitting backwards on my shelf. Speaking of dust, I bought 2 used S4s this week from someone local in Montreal who was running 16 S4s in a "data center". I've never seen more disgusting hardware in my life! Dirt was literally baked on everything, the picture doesn't really do it justice especially since the top of the hash boards were the cleanest part. Take a look: Pre-cleaning (middle and bottom were much worse): https://i.imgur.com/RUyQBlH.jpgAfter cleaning and installing a proper replacement PSU: https://i.imgur.com/e1xsEde.jpgAnd now she's purring: https://i.imgur.com/WgjcaKB.pngI wish I would have weighed the S4 before and after cleaning. No kidding, there must have been a pound of dirt and filth in there. I'd love to see where this person is running their machines. This unit actually had a huge defect, BITMAIN used a wrong nut and one of the 12v connections on a lower hash board was completely loose. It barely even touched the bolt's threads, slipping right off when trying to tighten it. I've never seen this nut before in an S4, so some asshole at BITMAIN's assembly line was too fucking lazy to get off his ass and fetch a proper nut right before he finished his shift on a Friday night. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) The wire's terminal was completely charred along with the nut and washer, the rubber insulation almost completely melted away, and the hash board looks damaged but works fine as far as I can tell. I don't know why I didn't take pics, but I still have the charred connector on the PSU if anyone wants a look. I'm putting the blame on BITMAIN since, judging by the sorry state the S4 was in when I got it, the previous owner had never bothered to open it up. Amusingly, somehow both units PSUs still worked even though they were stuffed with dirt/dust. Pretty funny considering I run my other S4s in a clean environment with very little dust, and I've had 4 out of 5 PSUs die on me. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) Edit: Just noticed that you can see the charred washer in the second picture, beside the screw driver's handle. Hi Prelude, What is your PSU? I have a few PSU's here but they have PCI-e connectors. Do you know how I can convert the wires to connect to the screws in that series of S4? Is it as simple as cutting the wire and screw it directly on the board? Thanks! All of my S4s are powered by IBM 2000W server PSUs. Yes, you could cut your wires, but then forget about selling your PSUs down the line. Personally, I would find a quality PCI-e 6 pin to 8 pin GPU adapter with at least 3x 18AWG wires and cut that instead of cutting the PSU's wires.
|
|
|
|
nokati
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 03, 2015, 03:04:26 PM |
|
I just got 4x of this fan; Noctua NF-F12 industrialPPC-3000 PWM, 120mm
Very impressed with the noice and quality, but it cant cool down the S4. Temps went up by 12 degree.
Have anybody any good suggestion about a fan for replacment? 3 of my fans are dead and I need to replace them. I dont care about the noice, I just want some good fans. Specially if they come having extra long wires it would be perfect.
thanks!
|
|
|
|
Meech
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 03, 2015, 04:12:16 PM |
|
There is a rumor that S4+ will soon be available. Dear BITMAIN, we want (and need) new chips. New miners. Not polished old hardware like S3++, S4+... p.s. and please don't forget about S2 uprade kits. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) Any more details on this rumor? Confirmed with Bitmain. S4+ inbound should be announced officially soon.
|
|
|
|
vegasguy
Legendary
Offline
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 03, 2015, 05:02:15 PM |
|
Have any idea on specs? Power draw? Hash speed? Noise?
Vegas
|
I want to make sure everyone knows that I just released my software called "Yobit pump alert". THis is custom software that uses an algo to detect the start of a pump here on yobit, the second it starts. YOu can even filter the coins you see by price. Most pumps start less than 100 sats , so you can easily filter the cheap coins, so they are the only ones displayed https://bitcointalk.org/index.php?topic=1945937.msg20241953#msg20241953
|
|
|
vegasguy
Legendary
Offline
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 03, 2015, 05:06:19 PM |
|
Well for those of you handy with repairing these..I just listed my antminer S4 on Ebay starting at $49 , no reserve. It is as-is. It powers on and lights the LED display , but led display is blank. Ethernet port flickers. Thats all I know. PLEASE DO NOT EMAIL/PM ME WITH QUESTIONS, BECAUSE IF I KNEW MORE I WOULD BE ABLE TO FIX THIS! . Im looking to just sell. Not troubleshoot. I have 100% feedback with 800+ transactions. Shipping inside usa ONLY! Payment in bitcoin or paypal Here it is: http://www.ebay.com/itm/-/281651706290?Vegas
|
I want to make sure everyone knows that I just released my software called "Yobit pump alert". THis is custom software that uses an algo to detect the start of a pump here on yobit, the second it starts. YOu can even filter the coins you see by price. Most pumps start less than 100 sats , so you can easily filter the cheap coins, so they are the only ones displayed https://bitcointalk.org/index.php?topic=1945937.msg20241953#msg20241953
|
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2015, 06:54:36 AM |
|
Bitmain, can you please fix the long outstanding bugs with the S4 before releasing an S4+? Worst bug of all being the J7 connected hash boards getting wayyyyy overvolted. I guarantee that contributed to a lot of dead PSUs. The S4 sucks a lot more power from the wall than it needs to because of that bug!!!
|
|
|
|
|