|
oup59
|
 |
June 20, 2017, 06:04:42 AM |
|
Dualmining ETH/SIA on nanopool doesn't work for me. ETH works fine but SC gets job timeouts.
---------------------------------------------------------------------------------
ETH: 06/20/17-10:15:39 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 20.727 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:18
ETH: GPU0 20.727 Mh/s
SC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
SC: GPU0 0.000 Mh/s
GPU0 t=67C fan=0%
Socket was closed remotely (by pool)
SC: Job timeout, disconnect, retry in 20 sec...
---------------------------------------------------------------------------------
I used nanopool's autoconfig generator, here s my config
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xmyethwallet -epsw x -dcoin sia -dpool sia-eu1.nanopool.org:7777 -dwal mysiawallet -dpsw x -ftime 10
Am I the only one? I tried replacing -dcoin sia with -dcoin sc but same result.
Did you change "0xmyethwallet" and "mysiawallet" to your actual wallet addresses? Yes I replaced both. ETH is mining normally but I only get timeouts for sia. Can you paste your start.bat file? I ll try it and see it it works. Maybe there s something wrong with my SIA address? I am having timeouts on sia as well both with nanapool and siamining.com. I was using SMOS and switched to Win10 but same thing happens. This time I got openCL call hang error and both ETH and SIA mining stopped as the miner crashed. At least it was mining ETH even if it get disconnected from sia pool. I believe problem is bios mod/undervolt. Maybe I undervolted the gpu a bit more and extra load on dul minining crashes the card so the miner. I will give some more juice but so far letting miner run to verify the gpu that has a problem. |
|
|
|
|
|
|
|
"The nature of Bitcoin is such that once version 0.1 was released, the
core design was set in stone for the rest of its lifetime." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
insurgus
Newbie
 Offline
Activity: 20
Merit: 0
|
|
June 20, 2017, 06:20:36 AM |
|
good job on the miner. finally switched to this on windows and the manager has been awesome!
|
|
|
|
|
|
ozzy1926
|
|
June 20, 2017, 06:32:38 AM |
|
So it's normal to see drop in hash rate since last night?
|
|
|
|
|
orbital_station1
Newbie
Offline
Activity: 24
Merit: 0
|
|
June 20, 2017, 06:41:33 AM |
|
Where is DAG file stored on windows 10?
It is not in "C:\Users\___\AppData\Local"
There is no "ethash" folder there. I have "show hidden files and folders" option selected.
|
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
June 20, 2017, 06:54:13 AM |
|
So it's normal to see drop in hash rate since last night?
The bunch of such stupid questions we will see every dag change for a long time )))) |
|
|
|
|
notbatman
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
June 20, 2017, 06:54:57 AM |
|
Where is DAG file stored on windows 10?
It is not in "C:\Users\___\AppData\Local"
There is no "ethash" folder there. I have "show hidden files and folders" option selected.
I believe claymore hides it in the VRAM. |
|
|
|
|
Bob_chemist
Newbie
Offline
Activity: 28
Merit: 0
|
|
June 20, 2017, 07:11:53 AM |
|
So it's normal to see drop in hash rate since last night?
The bunch of such stupid questions we will see every dag change for a long time )))) questions about 2 Gb memory are still almost on every page)) |
|
|
|
|
|
ozzy1926
|
|
June 20, 2017, 07:12:18 AM |
|
So it's normal to see drop in hash rate since last night?
The bunch of such stupid questions we will see every dag change for a long time )))) And we see bunch of morons like you trying to be smart ass everyday... |
|
|
|
|
|
ozzy1926
|
|
June 20, 2017, 07:13:36 AM |
|
So it's normal to see drop in hash rate since last night?
The bunch of such stupid questions we will see every dag change for a long time )))) questions about 2 Gb memory are still almost on every page)) My cards are 4gb nvidia so if you have any knowledge about GTA 980 cuda miner you are welcome to answer but if not go back to hole where you came from... |
|
|
|
|
nizzuu
Full Member
Offline
Activity: 187
Merit: 100
Cryptocurrency enthusiast
|
|
June 20, 2017, 07:19:12 AM |
|
Can I use Sapphire GPRO 8200 with Claymore miner? Technically, it's RX480, but what about drivers/software support?
|
|
|
|
|
premiero
Newbie
Offline
Activity: 31
Merit: 0
|
|
June 20, 2017, 07:28:10 AM |
|
@Claymore - could You please fix this annoying bug: when miner can not connect to the pool (lets say it's Internet provider technical break), after several minutes (sometimes seconds) it simply crashes whole PC. If You need more info, (debug logs or something) let me know.
|
|
|
|
|
davescream
Newbie
Offline
Activity: 50
Merit: 0
|
|
June 20, 2017, 07:58:19 AM |
|
If claymore can't fix it, chances are nobody can. Its hardware related. Just two aspects: The situation with Polaris which start to grow now is a good chance for unknown intusiasts to make their own name on fixing the problem. Claymore because of popularity may be involved in some political interests about solving (or not solving) that problem. For example AMD release new cards and want people buy it. Also ETH will go POS in a few months, so hashdrop because of high epoch become irrelevant. Anyway global changes in word of mining are inavoidable. |
|
|
|
|
Wawazawa
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 20, 2017, 08:14:45 AM |
|
hi guys please help me ive got 28hm/s but no shares. WHY???
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.162 Mh/s
ETH: 06/20/17-11:11:16 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.163 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.163 Mh/s
ETH: 06/20/17-11:11:22 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.162 Mh/s
GPU0 t=55C fan=0%
ETH: 06/20/17-11:12:04 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 28.162 Mh/s
ETH: 06/20/17-11:12:07 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 28.162 Mh/s
|
|
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
June 20, 2017, 08:17:05 AM |
|
hi guys please help me ive got 28hm/s but no shares. WHY???
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.162 Mh/s
ETH: 06/20/17-11:11:16 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.163 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.163 Mh/s
ETH: 06/20/17-11:11:22 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.162 Mh/s
GPU0 t=55C fan=0%
ETH: 06/20/17-11:12:04 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 28.162 Mh/s
ETH: 06/20/17-11:12:07 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 28.162 Mh/s
Wait longer... |
|
|
|
jackbox
Legendary
Offline
Activity: 1246
Merit: 1024
|
|
June 20, 2017, 08:17:23 AM |
|
hi guys please help me ive got 28hm/s but no shares. WHY???
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.162 Mh/s
ETH: 06/20/17-11:11:16 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.163 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.163 Mh/s
ETH: 06/20/17-11:11:22 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.162 Mh/s
GPU0 t=55C fan=0%
ETH: 06/20/17-11:12:04 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 28.162 Mh/s
ETH: 06/20/17-11:12:07 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 28.162 Mh/s
Because you've only been mining for one second. It can take a long time to get shares. My 6 GPU rig can go up to 20 minutes without shares. It is a numbers and luck game. Sometimes you find a lot of shares and sometimes you go a long time before finding nay. The higher the difficulty, the loner it will take to find shares. |
|
|
|
war4peace
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 20, 2017, 09:19:32 AM |
|
hi guys please help me ive got 28hm/s but no shares. WHY???
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.162 Mh/s
ETH: 06/20/17-11:11:16 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.163 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.163 Mh/s
ETH: 06/20/17-11:11:22 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 28.162 Mh/s
GPU0 t=55C fan=0%
ETH: 06/20/17-11:12:04 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 28.162 Mh/s
ETH: 06/20/17-11:12:07 - New job from eth-eu2.nanopool.org:9999
ETH - Total Speed: 28.162 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 28.162 Mh/s
Because you've only been mining for one second. It can take a long time to get shares. My 6 GPU rig can go up to 20 minutes without shares. It is a numbers and luck game. Sometimes you find a lot of shares and sometimes you go a long time before finding nay. The higher the difficulty, the loner it will take to find shares. timestamps are in hh:mm - so he was mining for one minute. Nevertheless, what you are saying is correct, he just needs to keep mining. |
|
|
|
|
webxass.de
Member
Offline
Activity: 98
Merit: 10
|
|
June 20, 2017, 09:32:52 AM |
|
im using the -logfile param to have a log of what is going on if the rig have to reboot cause of GPU error (testing phase for overclocking/undervolting) but it seems the logfile will be re-created after each miner-start ... the reference tells me that i would have to add "noappend" to the filename to get this behavior ... is there a bug probably? so even if i dont reboot but stop and start the miner, the logfile is empty again ... if i ssh into the rig and keep a terminal session open with a tail -f i can read the error when the rig is rebooting but thats not very handy ... what im doing is: |
|
|
|
Wawazawa
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 20, 2017, 10:11:18 AM |
|
but im getting paid only when i get shares,right?
|
|
|
|
|
kusje
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 20, 2017, 10:17:32 AM |
|
but im getting paid only when i get shares,right?
Just be patient..... |
|
|
|
|
bobjones34
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 20, 2017, 10:26:55 AM |
|
Hello,
I am using Ethos and would like to run claymore with 6 gpu
hope someone could point me in th right direction here (please !)
You have to believe me here when i say that i have tried absolutley everything
i have read here but i just cannot get 6 gpu working with this motherboard.
With Claymore each gpu is at least 2 mh/s faster
With ethminer i can run 5 stable(3 days)
with both sgminer and claymore's the 6 gpu will start up and hash at 27 or so and the cut down to 4
after 1 or 2 minutes.
With sgminer it also does me the courtesy of telling me that the 2 gpu are sick then dead.
This can be with any card in any slot,it always changes.
I think somehow that that is the important part ?
All cards and risers work fine and have been checked in different slots,different risers,individually,
in groups and any combination you can think of.
All the info on here i can find i have followed.
So that's 4 gpu with claymore and sgminer,
and 5 with ethminer.
This is my first build and i have really enjoyed it so far,im looking forward to making more hopefully.
but i have now been banging my head against a brick wall for 2 weeks now(starting to make a mess)
Anyway i hope someone here has a clue for me.
Cheers
|
|
|
|
|
|
