Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[benether]

If you want to use latest drivers for nvidia 9xx windows 10 and cuda 8, check out the following tutorial

I'm hashing at 20 MHs with a GTX 970.

You're kidding! 20MH/s?!

No i'm not... It's the best i could have. I think its not bad with 970

[1715134687]

1715134687

[1715134687]

1715134687

[Temporel]

If you want to use latest drivers for nvidia 9xx windows 10 and cuda 8, check out the following tutorial

I'm hashing at 20 MHs with a GTX 970.

You're kidding! 20MH/s?!

No i'm not... It's the best i could have. I think its not bad with 970

it is excellent. How much are you getting WITHOUT the tweaks ?

[benether]

If you want to use latest drivers for nvidia 9xx windows 10 and cuda 8, check out the following tutorial

I'm hashing at 20 MHs with a GTX 970.

You're kidding! 20MH/s?!

No i'm not... It's the best i could have. I think its not bad with 970

it is excellent. How much are you getting WITHOUT the tweaks ?

Started at 3 MHs with uptodate drivers.
Around 15/16 with old drivers 352.xx + OC

Using latest claymore versions also helps.

[Ursul0]

IMPRESSIVE--

Thanks for the post!  NVidia cards work well with higher "-dcri" values.  But, Maxwell (900 series) cards are likely to reach maximum performance at a much lower "-dcri" value than 500.  A setting of "-dcri 75" is a good place to start for Maxwell cards.

You're welcome

Radeon 4xx and 5xx cards, 1060 and 1070 cards all have core power more "in tune" with their GDDR5 memory speeds for ETH mining, so there is not much core power headroom left for second coin in dual mining mode. But, 1080 have plenty of core power left so the second coin can be mined very fast Full -dcri 500 can be utilised and probably more

Somebody with a 1080Ti card could do a few test and see what is happening with -dcri value in ETH + LBRY dual mode. Chances are that card could also mine second coin very fast

Have you tried ZEC? Because from what you are talking, since they aren't balanced (memory/core) like amd and lower nvidia cards, would be interesting to test them on a mining process that requires both memory and core power. Using higher than 8 intensity would be also nice (dunno if this is possible).

YES, I MINE ZEC--
 
But in order to get truly rewarding secondary coin hash rates Maxwell series cards require a high "-dcri" setting.  A miner should adjust  from a setting of "-dcri 75" as a starting point, as it will double the secondary coin hash rate compared to the default value.  ZEC mining is another miner, a single algo miner.

Right now I have several cards on the shelf.  AMD cards are in short supply, and I may put my 970 cards into a rig again soon.        --scryptr

I'm mining ZEC with my R7 370s, i don't find ETH worth with them.

I do ZEC also because of the lower temps(125W on RX470), cause I cant resist the temptation and run ALWAYS dual ETH(145W), as long as I do ETH at all.

[matrixukr]

2xRX480 4GB+2xRX480 8GB+2xRX470 4GB
DRIVERS 17.7.1  Claymore's 9.7 dual (eth+decred) -  158-162 mh - 4900 mh
DRIVERS 17.7.1  Claymore's 9.8 dual (eth+decred) -  158-162 mh - 4900 mh
BETA DRIVERS Claymore's 9.7 dual (eth+decred) - 169-175 mh- 5100 mh
BETA DRIVERS Claymore's 9.8 dual (eth+decred)- 170-175 mh- 5100 mh

[hankmooody]

Hello Guys
i have a rig with 6x 480 and running it for more then a month, for few weeks now windows is freezing after few hours, sometimes nearly 24h
I downlocked the cards and they run over 950mV (very conservative), still, Windows Freezes. HWInfo shows no significant memory errors.
In Bios, the PCIE Gen is 1x
I've checked all risers, they seem to be Okay.. I'm using the latest Claymore 9.8 Version
It's very suspicous that my setup was working fine, but now freezing every time.
What am i missing?
edit: reinstalled latest driver and reverted new windows updates, still my rig crashes, this time just after 3 hours.. i really have no clues left
edit2: i am connected remotely with teamviewer over the rig, its located at a friends house. after the freeze, my friend restarts the rig and I look up into the log files, nothing suspicious standing there, the Miner just freezes Windows without any watchdog error or whatso ever

[cl4ud1u]

2xRX480 4GB+2xRX480 8GB+2xRX470 4GB
DRIVERS 17.7.1  Claymore's 9.7 dual (eth+decred) -  158-162 mh - 4900 mh
DRIVERS 17.7.1  Claymore's 9.8 dual (eth+decred) -  158-162 mh - 4900 mh
BETA DRIVERS Claymore's 9.7 dual (eth+decred) - 169-175 mh- 5100 mh
BETA DRIVERS Claymore's 9.8 dual (eth+decred)- 170-175 mh- 5100 mh

what drivers? where to get them ?

[scryptr]

2xRX480 4GB+2xRX480 8GB+2xRX470 4GB
DRIVERS 17.7.1  Claymore's 9.7 dual (eth+decred) -  158-162 mh - 4900 mh
DRIVERS 17.7.1  Claymore's 9.8 dual (eth+decred) -  158-162 mh - 4900 mh
BETA DRIVERS Claymore's 9.7 dual (eth+decred) - 169-175 mh- 5100 mh
BETA DRIVERS Claymore's 9.8 dual (eth+decred)- 170-175 mh- 5100 mh

what drivers? where to get them ?

MOST LIKELY AT AMD'S OFFICIAL WEBSITE--

I haven't bothered to check, but AMD Radeon usually releases beta drivers to the public for trial.       --scryptr

[papasmurf1337]

Any news on the amd rx480-rx580 polaris solution?  About the speed of mining
Thanks.

If you are talking about the DAG issue, there is an new driver comming in a few days.

you guys still believe in miracles? 

Haha, i also think noone will see that

[Tomee]

2xRX480 4GB+2xRX480 8GB+2xRX470 4GB
DRIVERS 17.7.1  Claymore's 9.7 dual (eth+decred) -  158-162 mh - 4900 mh
DRIVERS 17.7.1  Claymore's 9.8 dual (eth+decred) -  158-162 mh - 4900 mh
BETA DRIVERS Claymore's 9.7 dual (eth+decred) - 169-175 mh- 5100 mh
BETA DRIVERS Claymore's 9.8 dual (eth+decred)- 170-175 mh- 5100 mh

what drivers? where to get them ?

MOST LIKELY AT AMD'S OFFICIAL WEBSITE--

I haven't bothered to check, but AMD Radeon usually releases beta drivers to the public for trial.       --scryptr

https://bitcointalk.org/index.php?topic=2068446.msg20663225#msg20663225

[Tomee]

2xRX480 4GB+2xRX480 8GB+2xRX470 4GB
DRIVERS 17.7.1  Claymore's 9.7 dual (eth+decred) -  158-162 mh - 4900 mh
DRIVERS 17.7.1  Claymore's 9.8 dual (eth+decred) -  158-162 mh - 4900 mh
BETA DRIVERS Claymore's 9.7 dual (eth+decred) - 169-175 mh- 5100 mh
BETA DRIVERS Claymore's 9.8 dual (eth+decred)- 170-175 mh- 5100 mh

what drivers? where to get them ?

MOST LIKELY AT AMD'S OFFICIAL WEBSITE--

I haven't bothered to check, but AMD Radeon usually releases beta drivers to the public for trial.       --scryptr

I hope this is it
https://bitcointalk.org/index.php?topic=2068446.msg20663225#msg20663225

[scryptr]

2xRX480 4GB+2xRX480 8GB+2xRX470 4GB
DRIVERS 17.7.1  Claymore's 9.7 dual (eth+decred) -  158-162 mh - 4900 mh
DRIVERS 17.7.1  Claymore's 9.8 dual (eth+decred) -  158-162 mh - 4900 mh
BETA DRIVERS Claymore's 9.7 dual (eth+decred) - 169-175 mh- 5100 mh
BETA DRIVERS Claymore's 9.8 dual (eth+decred)- 170-175 mh- 5100 mh

what drivers? where to get them ?

MOST LIKELY AT AMD'S OFFICIAL WEBSITE--

I haven't bothered to check, but AMD Radeon usually releases beta drivers to the public for trial.       --scryptr

I hope this is it
https://bitcointalk.org/index.php?topic=2068446.msg20663225#msg20663225

THIS DRIVER IS AN UNOFFICIAL RELEASE--

Apparently, a coder has managed to modify the AMD driver.  I can't use it, my AMD rigs are all Linux.  The linked page was a good read, but this driver is a user-modded driver.  Try it at your own risk.       --scryptr

[Haldon]

Any mh/s increase going from 9.7 to 9.8 on nvidia?

[Tomee]

2xRX480 4GB+2xRX480 8GB+2xRX470 4GB
DRIVERS 17.7.1  Claymore's 9.7 dual (eth+decred) -  158-162 mh - 4900 mh
DRIVERS 17.7.1  Claymore's 9.8 dual (eth+decred) -  158-162 mh - 4900 mh
BETA DRIVERS Claymore's 9.7 dual (eth+decred) - 169-175 mh- 5100 mh
BETA DRIVERS Claymore's 9.8 dual (eth+decred)- 170-175 mh- 5100 mh

what drivers? where to get them ?

MOST LIKELY AT AMD'S OFFICIAL WEBSITE--

I haven't bothered to check, but AMD Radeon usually releases beta drivers to the public for trial.       --scryptr

I tried. Not compatible with msi afterburner, high power consumption, no stable clock speed



I hope this is it
https://bitcointalk.org/index.php?topic=2068446.msg20663225#msg20663225

THIS DRIVER IS AN UNOFFICIAL RELEASE--

Apparently, a coder has managed to modify the AMD driver.  I can't use it, my AMD rigs are all Linux.  The linked page was a good read, but this driver is a user-modded driver.  Try it at your own risk.       --scryptr

[notbatman]

I'm solo mining ETC but I don't know the difficulty of the shares I'm finding so I can't tell if I'm getting close to hitting a block or not.

When it says share found it would be nice to see the difficulty and when I press "s" it would be nice to see the highest difficulty share found.

[Ursul0]

When it says share found it would be nice to see the difficulty and when I press "s" it would be nice to see the highest difficulty share found.

That!

[P00P135]

Help guys, my miner acting up on me. It's working everyday and out of a sudden I'm not getting any hashrate from that particular single RX580 worker. Checked the miner it's running fine. Restarted the miner, still run as usual. However after few hours pool still showing 0 hashrate.

You check the wallet address in your bat file?  Are you just not showing "reported hashrate" but its still accepting shares?

yes, address still the same as the pool page just decided to stop showing hashrate for this particular worker. It's still accepting shares..

I noticed this with nanopool early this morning.  Probably just a bug on their end.

[Temporel]

Im currently dual mining SIA with Claymore on Nanopool but I want to switch to lbry (also Dual).

I made some test on Supernova (with both lbry and decred) and I get way less credits than what I should get. Any suggestion for a lbry (or decred) pool besides Suprnova ?


TIA

[Trimegistus]

Im currently dual mining SIA with Claymore on Nanopool but I want to switch to lbry (also Dual).

I made some test on Supernova (with both lbry and decred) and I get way less credits than what I should get. Any suggestion for a lbry (or decred) pool besides Suprnova ?


TIA

I don't care for SIA but when it comes to DCR, dcr.suprnova.cc is one of the largest and best pools. Check it out:

https://dcrstats.com/pow

[agtprvctr]

How's v9.8 on gtx1070? Better?

I had a near 0.7mh/s jump on GTX1070 going from 9.6 to 9.7, but 9.8 is simply to fix the interface with latest 17.7.2 Catalyst, not supposed to have improved performance.