Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[larryhg]

Tried, It doesn't work

you unistalled drivers, installed 376.33 drivers and then put -eres 0 -lidag 1 in your command line and used claymore miner v 10.3?
cause this is what worked for me, -eres 0 and -lidag1 alone did not work only when i used the older driver and claymore version worked.

you are right! down grade to 376.33 works

[1714786683]

1714786683

[1714786683]

1714786683

[1714786683]

1714786683

[nlpoolscam]

Pool for SMARTCASH | VERGE and many other coins
NLPOOL.NL
Location: Amsterdam / Netherlands [EU]
Link up: 10GB/s

Announcement
Welcome to our mining pool NLPOOL.
Our philosophy:
- High performance / no unannounced downtime
- High profits for miners by lowering latency and stale shares
- High security / DDOS protection


Announcement
For high capacity miners we will have extra rewards and incentives during april 2018, adding 10% extra to your profits. Contact us for terms and conditions!


Support
Telegram - https://t.me/nlpool

Yeah sure. Since you are already scamming your miners, you have the funds to do it.

Example is XVG. Block reward is 1560 yet your pool is only displaying 1544 reward. You already got about 2% on block reward, and you are also getting ".9%" pool fee. Ridiculous.

You are skimming ever since your pool started.

Miners also mining several coins even without their consent and no assurance that it is being exchanged on their desired coins. And besides, its illegal already in the first place to let them mine other coins other than their desired coins to mine.

And really, DDOS protected? You are being DDOSed everyday.

[mine_phun]

Yeah sure. Since you are already scamming your miners, you have the funds to do it.

Example is XVG. Block reward is 1560 yet your pool is only displaying 1544 reward. You already got about 2% on block reward, and you are also getting ".9%" pool fee. Ridiculous.

You are skimming ever since your pool started.

Miners also mining several coins even without their consent and no assurance that it is being exchanged on their desired coins. And besides, its illegal already in the first place to let them mine other coins other than their desired coins to mine.

And really, DDOS protected? You are being DDOSed everyday.

Great to know we have so much love and attention. I guess it took you so much hard work to set up this Bitcointalk account and make this your first post ;-)
You will setup a new pool 100% "fair" and post below mine when you are done trolling? Is it really that bad these days to have some competition?

And for the DDOS, you are 100% right ... Ddos every day .... however it seems kiddies tools don't work anymore as our pool stays up and running stable ... so now we go Bitcointalk and start trolling?

Thanks for posting .... You really made my day as your envy assures me we are doing things right..... and so are all the people mining in my pool ;-)

Ps:

Miners also mining several coins even without their consent and no assurance that it is being exchanged on their desired coins. And besides, its illegal already in the first place to let them mine other coins other than their desired coins to mine.

Perhaps try mining in our pool. Set your password correctly to c=[coinsymbol] and you will mine only those coins.

If you want them exchanged set your username ( wallet address ) to the address / coin you want to have them exchanged in.

For example : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <LTC_WALLET_ADDRESS> -dpsw c=xvg -dcoin blake2s  > To get your mined XVG payed out in your Litecoin ( Coinbase / GDAX ) account so you can convert them straight to EUR/USD.

[mensa1984]

-lidag 1
-eres 0

DDU + 376.33

worked for me too! Also with Claymore 11.5.

For how long time will that work now do you think?

[nlpoolscam]

Yeah sure. Since you are already scamming your miners, you have the funds to do it.

Example is XVG. Block reward is 1560 yet your pool is only displaying 1544 reward. You already got about 2% on block reward, and you are also getting ".9%" pool fee. Ridiculous.

You are skimming ever since your pool started.

Miners also mining several coins even without their consent and no assurance that it is being exchanged on their desired coins. And besides, its illegal already in the first place to let them mine other coins other than their desired coins to mine.

And really, DDOS protected? You are being DDOSed everyday.

Great to know we have so much love and attention. I guess it took you so much hard work to set up this Bitcointalk account and make this your first post ;-)
You will setup a new pool 100% "fair" and post below mine when you are done trolling? Is it really that bad these days to have some competition?

And for the DDOS, you are 100% right ... Ddos every day .... however it seems kiddies tools don't work anymore as our pool stays up and running stable ... so now we go Bitcointalk and start trolling?

Thanks for posting .... You really made my day as your envy assures me we are doing things right..... and so are all the people mining in my pool ;-)

Ps:

Miners also mining several coins even without their consent and no assurance that it is being exchanged on their desired coins. And besides, its illegal already in the first place to let them mine other coins other than their desired coins to mine.

Perhaps try mining in our pool. Set your password correctly to c=[coinsymbol] and you will mine only those coins.

If you want them exchanged set your username ( wallet address ) to the address / coin you want to have them exchanged in.

For example : -o stratum+tcp://mine.nlpool.nl:5766 -dwal <LTC_WALLET_ADDRESS> -dpsw c=xvg -dcoin blake2s  > To get your mined XVG payed out in your Litecoin ( Coinbase / GDAX ) account so you can convert them straight to EUR/USD.

Dont divert the issue. Greatest example is XVG. Block reward is 1560, your pool then give 1544 to miners, you are stealing/getting around 1-2% on spot. And you were advertising it as 0 pool fee gimmick before? Hilarious. Now you are adding .9% on top of that.

Now you try your alibi here "due to network/miners fee, thats why 1544 bla bla bla". You're a big joke.

And yes, I already tried your shitpool. Setting c=XVG or whatever, it keeps mining other coin in the long run.

Yes, it took me seconds to create this account coz the username is really true.

[mine_phun]

Dont divert the issue. Greatest example is XVG. Block reward is 1560, your pool then give 1544 to miners, you are stealing/getting around 1-2% on spot. And you were advertising it as 0 pool fee gimmick before? Hilarious. Now you are adding .9% on top of that.

Now you try your alibi here "due to network/miners fee, thats why 1544 bla bla bla". You're a big joke.

And yes, I already tried your shitpool. Setting c=XVG or whatever, it keeps mining other coin in the long run.

Yes, it took me seconds to create this account coz the username is really true.

http://1stminingrig.com/use-new-claymores-dual-ethereum-gpu-miner-v11-0-blake2s-keccak-algorithms/

WHICH POOLS ARE THE BEST FOR DUAL MINING?

Before I get into the hashrates, here is some data I’ve gathered regarding pools:

nlpool – tested and reported by users as the best pool for blake2s

If you would have something to say, just speak up ... don't need to use a troll account for that.

[nlpoolscam]

Dont divert the issue. Greatest example is XVG. Block reward is 1560, your pool then give 1544 to miners, you are stealing/getting around 1-2% on spot. And you were advertising it as 0 pool fee gimmick before? Hilarious. Now you are adding .9% on top of that.

Now you try your alibi here "due to network/miners fee, thats why 1544 bla bla bla". You're a big joke.

And yes, I already tried your shitpool. Setting c=XVG or whatever, it keeps mining other coin in the long run.

Yes, it took me seconds to create this account coz the username is really true.

http://1stminingrig.com/use-new-claymores-dual-ethereum-gpu-miner-v11-0-blake2s-keccak-algorithms/

WHICH POOLS ARE THE BEST FOR DUAL MINING?

Before I get into the hashrates, here is some data I’ve gathered regarding pools:

nlpool – tested and reported by users as the best pool for blake2s

If you would have something to say, just speak up ... don't need to use a troll account for that.

You are still avoiding the issue. Silly. Dont make placebo as your backup.

[derselben]

-lidag 1
-eres 0

DDU + 376.33

worked for me too! Also with Claymore 11.5.

For how long time will that work now do you think?

try to run with -eres 1.. 2.. 3.. etc this will show you how many epoch forward this will work

[Avionica]

-lidag 1
-eres 0

DDU + 376.33

worked for me too! Also with Claymore 11.5.

For how long time will that work now do you think?

I think next time we will roll back to Win 7 if the problem is in the huge reservation of the gpu memory of Win 10

P.S. sorry for my English, google translate...

[mensa1984]

-lidag 1
-eres 0

DDU + 376.33

worked for me too! Also with Claymore 11.5.

For how long time will that work now do you think?

try to run with -eres 1.. 2.. 3.. etc this will show you how many epoch forward this will work

Could you please say, what will that mean in days / months approximately?

[nitrobg]

Could you please say, what will that mean in days / months approximately?

Run -benchmark 180 and increase it until you get errors. Is this hard for you?

[androstan1234]

For some reason, since the last windows update, i can no longer use the #0 card, it hangs out setting the dag.
Has anybody experienced this same problem?
I can't go back the windows version, so i'll move to linux (already have a lot of linux rigs so it's not a big problem) but i don't have the time right now, so i wanted to have it fully working for a few days more until the migration

Thanx guys!

Same thing happened to me.  Windows freezes when setting dag epoch on gpu0.  Problem is only on my TB85 rx580 rig with 4gb of system ram.  My TB250 rx570 rig with 8gb of system ram is fine.  Both are six-card rigs.

Work has been too busy so I haven't had time to troubleshoot.  Just used -di to turn off gpu0 for now.

If you figure something out plz let me know.

If anyone else has insight, please share.

[danitoEP]

Anyone getting a dag error on 3gb nvidia 1060 cards? I even had -eres 0 or whatever (dont allocate any extra dag's in memory) in the command line to fix it last time. Card 0 is a 4gb Fury and card 1 is a 3gb 1060.

Cant seem to get it going right now after it restarted a half hour ago (maybe a DAG/epoch change?) Running zenCash right now.

Yes, 3Gb Nvidia cards are getting dag error now. Also eres -0 is not working too...

same problem.

-lidag 1
-eres 0

DDU + 376.33

p.s. claymore 10.3

Yeah fix the problem, unistall nvidia driver, install 376.33 and add this parameter on bat file.

Thanks

[androstan1234]

For some reason, since the last windows update, i can no longer use the #0 card, it hangs out setting the dag.
Has anybody experienced this same problem?
I can't go back the windows version, so i'll move to linux (already have a lot of linux rigs so it's not a big problem) but i don't have the time right now, so i wanted to have it fully working for a few days more until the migration

Thanx guys!

Same thing happened to me.  Windows freezes when setting dag epoch on gpu0.  Problem is only on my TB85 rx580 rig with 4gb of system ram.  My TB250 rx570 rig with 8gb of system ram is fine.  Both are six-card rigs.

Work has been too busy so I haven't had time to troubleshoot.  Just used -di to turn off gpu0 for now.

If you figure something out plz let me know.

If anyone else has insight, please share.

To clarify, I did some very quick and rudimentary troubleshooting.  Ddu and clean install of aug23 blockchain driver.  Checked riser.  GPU0 appears normal in gpuz and msi AB.  No time atm to do much more.

[Munka9]

Dont divert the issue. Greatest example is XVG. Block reward is 1560, your pool then give 1544 to miners, you are stealing/getting around 1-2% on spot. And you were advertising it as 0 pool fee gimmick before? Hilarious. Now you are adding .9% on top of that.

Now you try your alibi here "due to network/miners fee, thats why 1544 bla bla bla". You're a big joke.

And yes, I already tried your shitpool. Setting c=XVG or whatever, it keeps mining other coin in the long run.

Yes, it took me seconds to create this account coz the username is really true.

http://1stminingrig.com/use-new-claymores-dual-ethereum-gpu-miner-v11-0-blake2s-keccak-algorithms/

WHICH POOLS ARE THE BEST FOR DUAL MINING?

Before I get into the hashrates, here is some data I’ve gathered regarding pools:

nlpool – tested and reported by users as the best pool for blake2s

If you would have something to say, just speak up ... don't need to use a troll account for that.

While I agree this is a troll. As a user of your pool would request you change the reward per block to the correct 1560 and then if you so choose add the 1% fee to bring it to 1.9%.

Even with 1.9% you're the best option as I see it, but transparency is something most crypto enthusiasts value highly.

[tenmoi]

Dont divert the issue. Greatest example is XVG. Block reward is 1560, your pool then give 1544 to miners, you are stealing/getting around 1-2% on spot. And you were advertising it as 0 pool fee gimmick before? Hilarious. Now you are adding .9% on top of that.

Now you try your alibi here "due to network/miners fee, thats why 1544 bla bla bla". You're a big joke.

And yes, I already tried your shitpool. Setting c=XVG or whatever, it keeps mining other coin in the long run.

Yes, it took me seconds to create this account coz the username is really true.

http://1stminingrig.com/use-new-claymores-dual-ethereum-gpu-miner-v11-0-blake2s-keccak-algorithms/

WHICH POOLS ARE THE BEST FOR DUAL MINING?

Before I get into the hashrates, here is some data I’ve gathered regarding pools:

nlpool – tested and reported by users as the best pool for blake2s

If you would have something to say, just speak up ... don't need to use a troll account for that.

While I agree this is a troll. As a user of your pool would request you change the reward per block to the correct 1560 and then if you so choose add the 1% fee to bring it to 1.9%.

Even with 1.9% you're the best option as I see it, but transparency is something most crypto enthusiasts value highly.

I must agree that nlpool is the best now. I can earn about 21 xvgs a day. I've tried other pools: blake2s, unimining, antmine. They give you less than 20. I think nlpoolscam has all the reasons to complain about nlpool mining other coins even though you only want to mine xvg. Perhaps when xvg is not available to mine, nlpool mines other blake2s coins and exchanges them to xvg later. Hence the bigger earnings. I'm guessing, anyway.

[mine_phun]

I must agree that nlpool is the best now. I can earn about 21 xvgs a day. I've tried other pools: blake2s, unimining, antmine. They give you less than 20. I think nlpoolscam has all the reasons to complain about nlpool mining other coins even though you only want to mine xvg. Perhaps when xvg is not available to mine, nlpool mines other blake2s coins and exchanges them to xvg later. Hence the bigger earnings. I'm guessing, anyway.

That is indeed right. When XVG is unavailable ( For whatever reason, network overload, wallet problems or just slow ) the pool gives you another coin and exchanges it back to XVG for you. This is one of the reasons you see more profit.
Also it helps against downtime.... I believe you all have been in the situation that your rig's unexpectedly rebooted because the pool is unavailable, hence it hurts your ETH performance when the second coin is unavailable, so with us you don´t have this problem. We want to provide a stable pool @ high quality.

While I agree this is a troll. As a user of your pool would request you change the reward per block to the correct 1560 and then if you so choose add the 1% fee to bring it to 1.9%.
Even with 1.9% you're the best option as I see it, but transparency is something most crypto enthusiasts value highly.

Thanks for letting me know. I will work on this in next days and try to have it displayed correctly. We use the +/- 15XVG per block to cover all transaction costs for payments where other pools just include this in their transactions. So you don't pay 1,9 ...It's just 0.9% as the 15 XVG per block does not even cover for it. It has been set this way from day one and i don't want to cause any unannounced downtime over the eastern holiday weekend, so i will do this with caution

Please note that some months ago during the first week of the pool start i made a mistake, causing some blocks to be lost. I have always been honest about this, and promised set the fee to 0% for a month as compensation. As this is long ago, i need to pay for the hardware to keep the pool running, so there is no profit for me in this.

[nlpoolscam]

Oh gosh. The point here guys is he is trying to be angelic with his 0 pool fee or whatever the fuck his gimmick was. Now he is adding ".9%?" on top of what he is already stealing ever since the pool started. The point is he is skimming as well. He is not transparent. And he is trying to reason out the 1544xvg as "miner's fee". Ridiculous.

Well ok, when you put LTC as your wallet you "might?" be paid for whatever the shitcoin you dont intentionally mine. But I do not believe you will be paid in XVG/XSH if you use XVG/XSH or whatever the shitcoin as your wallet. There are no efficient exchanges for shitcoins to shitcoins. Such as shield to xvg. Doing it so will eat fees. Shitcoins>ltc/btc>desired shitcoin. I dont think he is willing to lose such. Hell he even skimmed you 1-2%, what more with the lots of exchanger's fees? I dont think he has a bot to do so. Heck he is even exchanging LTC manually.

It's just annoying to see him advertise on a daily basis on this thread with so enticing gimmicks. Why not create a new thread?

Im a troll? Yeah I do. But truth hurts you know.

[mine_phun]

Oh gosh. The point here guys is he is trying to be angelic with his 0 pool fee or whatever the fuck his gimmick was. Now he is adding ".9%?" on top of what he is already stealing ever since the pool started. The point is he is skimming as well. He is not transparent. And he is trying to reason out the 1544xvg as "miner's fee". Ridiculous.

Well ok, when you put LTC as your wallet you "might?" be paid for whatever the shitcoin you dont intentionally mine. But I do not believe you will be paid in XVG/XSH if you use XVG/XSH or whatever the shitcoin as your wallet. There are no efficient exchanges for shitcoins to shitcoins. Such as shield to xvg. Doing it so will eat fees. Shitcoins>ltc/btc>desired shitcoin. I dont think he is willing to lose such. Hell he even skimmed you 1-2%, what more with the lots of exchanger's fees? I dont think he has a bot to do so. Heck he is even exchanging LTC manually.

It's just annoying to see him advertise on a daily basis on this thread with so enticing gimmicks. Why not create a new thread?

Im a troll? Yeah I do. But truth hurts you know.

So, you are not a "standard" troll, but now you are a funny and try to be a smart troll!   

Well ok, when you put LTC as your wallet you "might?" be paid for whatever the shitcoin you dont intentionally mine. But I do not believe you will be paid in XVG/XSH if you use XVG/XSH or whatever the shitcoin as your wallet. There are no efficient exchanges for shitcoins to shitcoins. Such as shield to xvg. Doing it so will eat fees. Shitcoins>ltc/btc>desired shitcoin. I dont think he is willing to lose such. Hell he even skimmed you 1-2%, what more with the lots of exchanger's fees? I dont think he has a bot to do so. Heck he is even exchanging LTC manually.

Do you seriously think that what you say here makes sense?  We are running automated conversion for weeks now and it just works perfectly, can't you apprehend that? People are using it, get payed in the coins they want and are more then satisfied with our pool... reason they stick with us

Why on earth do you think that every earning goes over an exchange and why do you think this is necessary? ... Do you really think that i am sitting here with a piece of paper doing conversions for miners like in 1980??

Let me help you out here .... We actually have put time and effort in this and have made code for this to automagically convert your coins without having them hit the exchange working together with some API's to the exchanges to get realtime exchange rates.

Do you get it now that we might be ahead of you and competition and just run a good service?

Im a troll? Yeah I do. But truth hurts you know.

If you would tell the truth that would be nice. Also you don't need to create a troll account for this unless you are hiding something yourself?
And for now you are only advertising my pool since there is nothing i have to hide. Stop bothering people with FUD.

[telep]

Hi all, how are you?

I´m having a strange issue mining on claymore eth:

Since 2days ago, the miner program restarts every 5-10 minutes, with no gpu errors, speed dcrease on any gpu or something like that.
It only happens with claymore ethereum, 11.5,11.4 ...  Any problem with sgminer, claymore xmr or other miners.

This is a 10gpu rx470/570 rig, asrock h110 running SMOS under linux.


Any ideas?? Anyone had this issue before?