nu1mlock
|
|
May 27, 2017, 10:30:45 PM Last edit: May 28, 2017, 05:38:05 AM by nu1mlock |
|
I do have it set to Gen 1, I'll try setting it to auto in the morning and report back. All other things you suggested is already how I'm set up.
Edit: I tried it before I went to bed yesterday and it's been running great for the last 7 hours, so it seems that it did the trick. Thank you!
|
|
|
|
PeaMine
|
|
May 28, 2017, 05:10:22 AM |
|
Is it possible to do this with Rufus?
|
Datacenter Technician and Electrician. If you have any questions feel free to ask me as I am generally bored looking at logs and happy to help during free time.
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
May 28, 2017, 05:54:25 AM |
|
For many of my rigs that I am currently building, the smOS loads fine but then after the miner starts (claymore 9.4) it just sits at:
ETH: 1 pool is specified Main Ethereum pool is ethermine.org (or whatever the address is) DCR: 0 pool is specified
It sits there until the computer restarts and then just does it again. Sometimes it will load and start mining though. Any ideas as to why?
|
|
|
|
nu1mlock
|
|
May 28, 2017, 06:04:38 AM Last edit: May 28, 2017, 06:23:51 AM by nu1mlock |
|
I'm having another issue. While my 6x Sapphire RX 570 Pulse Mini's work fine with SimpleMining, it seems that the core overclocking doesn't work.
If I leave it as nothing, it'll run at 1106MHz even though base clock is 1244MHz. It doesn't matter if I change it from the OC settings or directly in the miner config.
Memory clock, however, works just fine to overclock.
Any ideas?
Edit: It looks like it's setting the correct value at boot but then changes back to 1106MHz as soon as it starts mining.
|
|
|
|
Vaperdude
Newbie
Offline
Activity: 5
Merit: 0
|
|
May 28, 2017, 07:41:45 AM |
|
Good Day , I am new to ming and had the possibility to get 4 x Sapphire RX470's 8GB Everything i installed but do i need to put the ($) dollarsign in front of the wallet Like $XXXXXXXXXXXXX/$XXXXXXX or XXXXXXXXXXXXX/XXXXXXXXX Do i get money when wrong? Hope you can help me. Thanks miners
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
May 28, 2017, 07:51:31 AM |
|
Any update on nvidia support? Would love to combine my nvidia rigs with my ETH rigs and make all my rigs simpleminingOS
|
|
|
|
crazyivan
Legendary
Offline
Activity: 1652
Merit: 1007
DMD Diamond Making Money 4+ years! Join us!
|
|
May 28, 2017, 08:14:36 AM |
|
Whenever I try to use software out of the books, it does not see my wireless card and does not have internet connection. I assume this is due to Linux-wifi driver issue. Any solution for this, besides going to lan.
|
|
|
|
mo35
Member
Offline
Activity: 142
Merit: 10
|
|
May 28, 2017, 08:50:27 AM |
|
Any update on nvidia support? Would love to combine my nvidia rigs with my ETH rigs and make all my rigs simpleminingOS
+1 another one waiting , due latest raise of some coins , i love nvidia rigs more and more.
|
|
|
|
Shizzle my dizzle
Newbie
Offline
Activity: 21
Merit: 0
|
|
May 28, 2017, 09:08:15 AM |
|
Whenever I try to use software out of the books, it does not see my wireless card and does not have internet connection. I assume this is due to Linux-wifi driver issue. Any solution for this, besides going to lan.
Buy another cheap WiFi adapter. The cheapest work out of the box the most times.
|
|
|
|
dzierski
Newbie
Offline
Activity: 5
Merit: 0
|
|
May 28, 2017, 10:03:55 AM |
|
Hi, so for a long time my rigs was doing OK. Now when you moved from 9.3 to 9.4 i getting lots of "WATCHDOG: GPU (number) hangs in OpenCL call, exit" For future troubleshooting could you do not remove old version of mining software till we are sure that new one is stable? Could you restore 9.3?
also Claymore has this option:
-r Restart miner mode. "-r 0" (default) - restart miner if something wrong with GPU. "-r -1" - disable automatic restarting. -r >20 - restart miner if something wrong with GPU or by timer. For example, "-r 60" - restart miner every hour or when some GPU failed. "-r 1" closes miner and execute "reboot.bat" file ("reboot.bash" or "reboot.sh" for Linux version) in the miner directory (if exists) if some GPU failed. So you can create "reboot.bat" file and perform some actions, for example, reboot system if you put this line there: "shutdown /r /t 5 /f".
I wish to use "-r 1" but not sure if you created reboot.bat if not, could you? it would be awesome, becouse most of the cases even if i reset only mining software it will hang after reloading. Resetting whole rig is the best option.
|
|
|
|
crazyivan
Legendary
Offline
Activity: 1652
Merit: 1007
DMD Diamond Making Money 4+ years! Join us!
|
|
May 28, 2017, 10:08:13 AM |
|
Whenever I try to use software out of the books, it does not see my wireless card and does not have internet connection. I assume this is due to Linux-wifi driver issue. Any solution for this, besides going to lan.
Buy another cheap WiFi adapter. The cheapest work out of the box the most times. Is there any alternative to this. I ve tried 2 of these and none of them works.
|
|
|
|
Toxicable
Newbie
Offline
Activity: 53
Merit: 0
|
|
May 28, 2017, 10:33:29 AM |
|
Would it be possible to include Burst mining into the OS? I rather like the OS but it's kind of annoying having 1 rig running windows just for burst mining, it would be nice to have it all happen from your OS. I believe the miner is compatible with Linux without any extra dependencies since it's in C++, in which case I don't think it would overly hard to implement, just add another option along side the Current miners
|
|
|
|
|
Shizzle my dizzle
Newbie
Offline
Activity: 21
Merit: 0
|
|
May 28, 2017, 11:51:45 AM |
|
Whenever I try to use software out of the books, it does not see my wireless card and does not have internet connection. I assume this is due to Linux-wifi driver issue. Any solution for this, besides going to lan.
Buy another cheap WiFi adapter. The cheapest work out of the box the most times. Is there any alternative to this. I ve tried 2 of these and none of them works. Oh well, did you Google at all? Check this: https://bitcointalk.org/index.php?topic=1541084.msg17850860#msg17850860
|
|
|
|
realter
Newbie
Offline
Activity: 49
Merit: 0
|
|
May 28, 2017, 12:59:23 PM |
|
Any update on nvidia support? Would love to combine my nvidia rigs with my ETH rigs and make all my rigs simpleminingOS
+1 another one waiting , due latest raise of some coins , i love nvidia rigs more and more. +1 i have 4 rig with 1060.
|
|
|
|
nu1mlock
|
|
May 28, 2017, 01:50:35 PM |
|
Is there any way to increase power limit and increase core clock speed? I have 6x Sapphire RX 570 Pulse Mini's and SMOS defaults to 1106 core clock, even though the GPU BIOS is 1244 and I've set 1350 in SMOS. Memory can be overclocked fine.
I'm not familiar with linux if there's anything I need to do that isn't available from the dashboard. I should note that adding "-powlim 50" to the Claymore setting doesn't do anything. Neither does "-cclock 1350".
|
|
|
|
vacs03
Member
Offline
Activity: 63
Merit: 10
|
|
May 28, 2017, 02:18:31 PM |
|
is wifi supported? I tried with a tp-link usb dongle with no luck Is there any way to increase power limit and increase core clock speed? I have 6x Sapphire RX 570 Pulse Mini's and SMOS defaults to 1106 core clock, even though the GPU BIOS is 1244 and I've set 1350 in SMOS. Memory can be overclocked fine.
I'm not familiar with linux if there's anything I need to do that isn't available from the dashboard. I should note that adding "-powlim 50" to the Claymore setting doesn't do anything. Neither does "-cclock 1350".
increasing the core won't get you far, it just consumes more power...i set mine like this to get 176.6MH/s with 6x rx570 and 950w http://imgur.com/k7i24Nahttps://i.imgur.com/fGhr0TG.jpg
|
|
|
|
nu1mlock
|
|
May 28, 2017, 03:56:49 PM |
|
No, perhaps not increasing the core clock for ETH but it matters for other coins. And since it's simply not working at all, I'd like some help in figuring out what the reason could be. When it comes to power limit, however, it makes quite a bit difference. I know it consumes more power, but in Windows 10 and +20 powerlimit I got 165 MH/s and 600 MH/s SIA (I think). However, in SMOS I get 144 MH/s without lowering -dcri more.
|
|
|
|
OverEasy
|
|
May 28, 2017, 04:22:56 PM |
|
I'm still trying to figure out how to tell SMOS my WIFI password. I sure can't get a internet connection without it...
|
|
|
|
|
|