Spiffy_1
|
|
November 13, 2017, 11:41:55 PM |
|
Stupid Question Alert!
I'm primarily a windows user, and I use a razor mouse, model rc30-006501. Linux will not detect this mouse. I can't figure it out. I use different usb ports, enable legacy usb / disasble legacy usb in bios, and still no luck. Plug in half broken P.O.S. generic walmart mouse with wheel that barely spins, detected. plug razor into same slot.. No go. Don't make me dig out my trackball lol.
Serious note, I have no linux nohow to fix this, so if it isn't a plug and play fix I can't really access a terminal to do command line stuff without a mouse.
thanks for suggestions.
Side note, this is with nvoc 19-14
I guess my counter would be why do you need a local display anyway? Beyond my first installation of nvOC 19.0 a few months back, I have been running headless on all of my rigs. With SSH, you can do everything necessary as long as you set LOCALorREMOTE="REMOTE" in 1bash. I have used unix based systems for many years in my line of work and rarely had console access. Give me putty, WinSCP, and Xming and I can do anything on nvOC without a locally attached display. Short answer, because every time I've set it up in 1bash using windows, it fails to mine for my account, and I wanted to verify it is indeed mining before I turn it loose as headless. So I set it up to mine ETH and it turns around and mines ZEC for someone else. So if I can access the 1bash scrypt under linux I can fix this minor problem except I don't have a mouse. And I also believe I mentioned zero linux knowledge so being able to verify its working before I turn it loose and learn how to connect to it in another way would be ideal. But since I don't have a mouse that detects I was looking for an idea.
|
If you like what I've posted, mine for me on whatever algo you like on www.zpool.ca for a minute using my bitcoin address: 1BJJYPRcRPzTEfByCwkeJ8SCBcrnGD1nhL
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
November 14, 2017, 12:50:27 AM |
|
Stupid Question Alert!
I'm primarily a windows user, and I use a razor mouse, model rc30-006501. Linux will not detect this mouse. I can't figure it out. I use different usb ports, enable legacy usb / disasble legacy usb in bios, and still no luck. Plug in half broken P.O.S. generic walmart mouse with wheel that barely spins, detected. plug razor into same slot.. No go. Don't make me dig out my trackball lol.
Serious note, I have no linux nohow to fix this, so if it isn't a plug and play fix I can't really access a terminal to do command line stuff without a mouse.
thanks for suggestions.
Side note, this is with nvoc 19-14
I guess my counter would be why do you need a local display anyway? Beyond my first installation of nvOC 19.0 a few months back, I have been running headless on all of my rigs. With SSH, you can do everything necessary as long as you set LOCALorREMOTE="REMOTE" in 1bash. I have used unix based systems for many years in my line of work and rarely had console access. Give me putty, WinSCP, and Xming and I can do anything on nvOC without a locally attached display. Short answer, because every time I've set it up in 1bash using windows, it fails to mine for my account, and I wanted to verify it is indeed mining before I turn it loose as headless. So I set it up to mine ETH and it turns around and mines ZEC for someone else. So if I can access the 1bash scrypt under linux I can fix this minor problem except I don't have a mouse. And I also believe I mentioned zero linux knowledge so being able to verify its working before I turn it loose and learn how to connect to it in another way would be ideal. But since I don't have a mouse that detects I was looking for an idea. Fair enough. This is not an nvOC specific problem though since nvOC is built on Ubuntu. What I would suggest you do is search the web for "Ubuntu razer mouse". I just did and came up with several hits. One of which said it is not supported - but I am not sure if that is applicable to your model. Hope this helps.
|
|
|
|
NameTaken
|
|
November 14, 2017, 04:34:46 AM |
|
I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
November 14, 2017, 04:37:07 AM |
|
I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?
No.
|
|
|
|
NameTaken
|
|
November 14, 2017, 04:37:54 AM |
|
I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?
No. Care to elaborate?
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
November 14, 2017, 04:50:10 AM |
|
I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?
No. Care to elaborate? It's the main setting for all the scripts running in nvOC, you can't remove it and expect them to run You don't like it, you should use Ubuntu with no modifications
|
|
|
|
NameTaken
|
|
November 14, 2017, 04:54:26 AM |
|
I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?
No. Care to elaborate? It's the main setting for all the scripts running in nvOC, you can't remove it and expect them to run You don't like it, you should use Ubuntu with no modifications I don't want any scripts to run which is why I want to remove it.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
November 14, 2017, 05:09:09 AM |
|
I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?
No. Care to elaborate? It's the main setting for all the scripts running in nvOC, you can't remove it and expect them to run You don't like it, you should use Ubuntu with no modifications I don't want any scripts to run which is why I want to remove it. Thats why I suggest to use standard Ubuntu or any other linux distro You cant say I dont like windows control panel, can I remove it and make my own control panel? nvOC is written to run those scripts, it will make so many problems without 1bash
|
|
|
|
NameTaken
|
|
November 14, 2017, 05:15:21 AM |
|
I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?
No. Care to elaborate? It's the main setting for all the scripts running in nvOC, you can't remove it and expect them to run You don't like it, you should use Ubuntu with no modifications I don't want any scripts to run which is why I want to remove it. Thats why I suggest to use standard Ubuntu or any other linux distro You cant say I dont like windows control panel, can I remove it and make my own control panel? nvOC is written to run those scripts, it will make so many problems without 1bash Then how to make 1bash do the minimum it needs to do and nothing more?
|
|
|
|
bdog1234
|
|
November 14, 2017, 05:16:33 AM |
|
I don't want any scripts to run which is why I want to remove it.
Then why do you want it? NVOC essentially is the scripts which are controlled by 1bash. Without them it is just Ubuntu Linux and doesn't mine anything. If that is what you want get Ubuntu. What you are asking is kind of like saying I want to buy Microsoft office but I don't want it to have word, excel, powerpoint, outlook, or one note. The stuff you are saying you don't want is the core of it.
|
|
|
|
bdog1234
|
|
November 14, 2017, 05:17:54 AM |
|
I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?
No. Care to elaborate? It's the main setting for all the scripts running in nvOC, you can't remove it and expect them to run You don't like it, you should use Ubuntu with no modifications I don't want any scripts to run which is why I want to remove it. Thats why I suggest to use standard Ubuntu or any other linux distro You cant say I dont like windows control panel, can I remove it and make my own control panel? nvOC is written to run those scripts, it will make so many problems without 1bash Then how to make 1bash do the minimum it needs to do and nothing more? It isn't a large file or overly complex. Download it it is free. 1bash is just a text file. read it and set the things you don't want it to do to NO
|
|
|
|
NameTaken
|
|
November 14, 2017, 05:26:37 AM |
|
I don't want any scripts to run which is why I want to remove it.
Then why do you want it? NVOC essentially is the scripts which are controlled by 1bash. Without them it is just Ubuntu Linux and doesn't mine anything. If that is what you want get Ubuntu. What you are asking is kind of like saying I want to buy Microsoft office but I don't want it to have word, excel, powerpoint, outlook, or one note. The stuff you are saying you don't want is the core of it. Installing Ubuntu is a PITA. I want an OS with the driver preinstalled to plug into headless rigs. I wrote my own ansible-playbook for configuration and running miners using systemd.
|
|
|
|
Malbo
Newbie
Offline
Activity: 26
Merit: 0
|
|
November 14, 2017, 05:40:32 AM |
|
Hi, someone know how to recover an USB Key or HDD where nvOC was installed ? i can't format it, windows give me and error when i try to format...
thanks!
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
November 14, 2017, 06:07:10 AM |
|
I don't want any scripts to run which is why I want to remove it.
Then why do you want it? NVOC essentially is the scripts which are controlled by 1bash. Without them it is just Ubuntu Linux and doesn't mine anything. If that is what you want get Ubuntu. What you are asking is kind of like saying I want to buy Microsoft office but I don't want it to have word, excel, powerpoint, outlook, or one note. The stuff you are saying you don't want is the core of it. Installing Ubuntu is a PITA. I want an OS with the driver preinstalled to plug into headless rigs. I wrote my own ansible-playbook for configuration and running miners using systemd. Disable integrated gpu, plug monitor with hdmi to your gpu, install ubuntu, then install nvidia drivers Should not be any problems
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
November 14, 2017, 06:35:32 AM |
|
Hi, someone know how to recover an USB Key or HDD where nvOC was installed ? i can't format it, windows give me and error when i try to format...
thanks!
There are many programs for windows to read ext4 linux drives ext2fsdDiskInternals Linux ReaderExt2exploreTo fully format from windows you may need to do it from disk management
|
|
|
|
Phan_Trong_Hieu
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 14, 2017, 06:51:28 AM |
|
Please add Bitcoin Gold (BTG) to nvOC. Thank you !
|
|
|
|
Godm0de
Newbie
Offline
Activity: 12
Merit: 0
|
|
November 14, 2017, 07:28:05 AM |
|
Guys can you help me please My rig has been crashed and couldn't reboot itself this was last message GPU_COUNT: 13
GPU UTILIZATION: Unable to determine the device handle for GPU 0000:0B:00.0: GPU is lost. Reboot the system to recover this GPU Sun Nov 12 12:24:15 EST 2017 - Lost GPU so restarting system. Found GPU's: Unable to determine the device handle for GPU 0000:0B:00.0: GPU is lost. Reboot the system to recover this GPU
Sun Nov 12 12:24:15 EST 2017 - reboot in 10 seconds
It has happen few times, since I was away from my rigs it cost me massive down time Eventually it was power cycled and manually rebooted Is it because OC (gtx1080 pl150 cc0 mc600)? or something else I have the exact same problem with my rig, but it picks a card at random to "lose". I've replaced all the risers and usb cables and still get the same problem. I thought it might be power related, but I am only at 550w each on my 2 x 750w power supplies. I still haven't been able to figure it out. I have the same problem. In my opinion, the problem is, when a GPU falls of the bus, the watchdog is unable to call nvidia-smi and I have to manually reset my rig.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
November 14, 2017, 08:15:46 AM |
|
Please add Bitcoin Gold (BTG) to nvOC. Thank you !
Easy add : That's my BTG settings: in 1bash add: COIN="BTG" PAPAMPI_WTM_AUTO_SWITCH="NO"
BTG_WORKER="$WORKERNAME" BTG_ADDRESS="$SUPRNOVA_NAME" BTG_POOL="btg.suprnova.cc" BTG_PORT="8816"
and in 3main add: if [ $COIN == "BTG" ] then
if [ $EWBF_VERSION == "3_3" ] then HCD='/home/m1/zec/v3_3/miner' fi
if [ $EWBF_VERSION == "3_4" ] then HCD='/home/m1/zec/v3_4/miner' fi
BTGADDR="$BTG_ADDRESS.$BTG_WORKER"
if [ $ZM_or_EWBF == "ZM" ] then HCD='/home/m1/zec/zm/5_2/zm_miner' screen -dmSL miner $HCD --server $BTG_POOL --user $BTGADDR --pass z --port $BTG_PORT; fi
if [ $ZM_or_EWBF == "EWBF" ] then screen -dmSL miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $BTG_POOL --user $BTGADDR --pass z --port $BTG_PORT; fi
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi
BTG is not on whattomine. So the switcher will not run. fredeq in wtm thread said he is working on it to add it to wtm soon. Mining pools are opening for Bitcoin Gold... Any plans in near future to add it to wtm calculator?
Yes, will research this coin soon.
|
|
|
|
Rumo
Newbie
Offline
Activity: 41
Merit: 0
|
|
November 14, 2017, 08:53:34 AM |
|
Please add Bitcoin Gold (BTG) to nvOC. Thank you !
Easy add : That's my BTG settings: in 1bash add: COIN="BTG" PAPAMPI_WTM_AUTO_SWITCH="NO"
BTG_WORKER="$WORKERNAME" BTG_ADDRESS="$SUPRNOVA_NAME" BTG_POOL="btg.suprnova.cc" BTG_PORT="8816"
BTG is not on whattomine. So the switcher will not run. fredeq in wtm thread said he is working on it to add it to wtm soon. Mining pools are opening for Bitcoin Gold... Any plans in near future to add it to wtm calculator?
Yes, will research this coin soon. WOW i was quoted by a legend ;-)
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
November 14, 2017, 09:22:26 AM |
|
Please add Bitcoin Gold (BTG) to nvOC. Thank you !
Easy add : That's my BTG settings: in 1bash add: COIN="BTG" PAPAMPI_WTM_AUTO_SWITCH="NO"
BTG_WORKER="$WORKERNAME" BTG_ADDRESS="$SUPRNOVA_NAME" BTG_POOL="btg.suprnova.cc" BTG_PORT="8816"
BTG is not on whattomine. So the switcher will not run. fredeq in wtm thread said he is working on it to add it to wtm soon. Mining pools are opening for Bitcoin Gold... Any plans in near future to add it to wtm calculator?
Yes, will research this coin soon. WOW i was quoted by a legend ;-) lol ... I'm no legend, but thanks for compliment.
|
|
|
|
|