[ mining os ] nvoc

[Rumo]

I need to edit my original post. It now does it on EVERY coin I try. The latest was GRS  BTG, PIRL and ETH

So I don't know if it's the miner or which part is hanging. That's why I'm hoping for logs.
I have reflashed 3 drives and it's fine if to all 3 now.

The standard overclocking value is 100 100. If you use overclocked cards it can be to much. Configure overclocking to 0 0 and test again. If it is stable increase it by 10 50 or something like this.

[kk003]

Only thing I don't understand is:

#Click calculate, then add .json to coins at the begining of the address after you click calculate!!!

I have two rigs, one with Nvoc 19 and other with centos7 (no switch there) and I may be interested in adding the switch once I fully understand how it works.  

When you set your cards, hash rate, profit, difficulty ,... on whattomine.com and click calculate it creates a link for your settings, then you should add .json to make it readable by the script.

created link is some thing like this :

Code:

https://whattomine.com/coins?utf8=✓&adapt_q_280x .....

you make it readable for script by changing coins to coins.json like this

Code:

https://whattomine.com/coins.json?utf8=✓&adapt_q_280x ... 

Ok. Do you mean var WTM_AUTO_SWITCH_URL must contain that link with the .json modification?

[Rumo]

Only thing I don't understand is:

#Click calculate, then add .json to coins at the begining of the address after you click calculate!!!

I have two rigs, one with Nvoc 19 and other with centos7 (no switch there) and I may be interested in adding the switch once I fully understand how it works.  

When you set your cards, hash rate, profit, difficulty ,... on whattomine.com and click calculate it creates a link for your settings, then you should add .json to make it readable by the script.

created link is some thing like this :

Code:

https://whattomine.com/coins?utf8=✓&adapt_q_280x .....

you make it readable for script by changing coins to coins.json like this

Code:

https://whattomine.com/coins.json?utf8=✓&adapt_q_280x ... 

Ok. Do you mean var WTM_AUTO_SWITCH_URL must contain that link with the .json modification?

Jepp. Thats it. Like

Code:

WTM_AUTO_SWITCH_URL="https://whattomine.com/coins.json?utf8=%E2%9C%93&adapt_q_280x=0&adapt_q_380=0&adapt_q_fury=0&adapt_q_470=0&adapt_q_480=0&adapt_q_570=0&adapt_q_580=0&adapt_q_750Ti=0&adapt_q_1050Ti=0&adapt_q_10606=0&adapt_q_1070=8&adapt_1070=true&adapt_q_1080=0&adapt_q_1080Ti=0&eth=true&factor%5Beth_hr%5D=240.0&factor%5Beth_p%5D=960.0&grof=true&factor%5Bgro_hr%5D=284.0&factor%5Bgro_p%5D=1040.0&x11gf=true&factor%5Bx11g_hr%5D=92.0&factor%5Bx11g_p%5D=960.0&cn=true&factor%5Bcn_hr%5D=4000.0&factor%5Bcn_p%5D=800.0&eq=true&factor%5Beq_hr%5D=3440.0&factor%5Beq_p%5D=960.0&lre=true&factor%5Blrev2_hr%5D=284000.0&factor%5Blrev2_p%5D=1040.0&ns=true&factor%5Bns_hr%5D=8400.0&factor%5Bns_p%5D=1240.0&lbry=true&factor%5Blbry_hr%5D=2160.0&factor%5Blbry_p%5D=960.0&bk2bf=true&factor%5Bbk2b_hr%5D=12800.0&factor%5Bbk2b_p%5D=960.0&bk14=true&factor%5Bbk14_hr%5D=20000.0&factor%5Bbk14_p%5D=1000.0&pas=true&factor%5Bpas_hr%5D=7520.0&factor%5Bpas_p%5D=960.0&skh=true&factor%5Bskh_hr%5D=212.0&factor%5Bskh_p%5D=960.0&factor%5Bl2z_hr%5D=420.0&factor%5Bl2z_p%5D=300.0&factor%5Bcost%5D=0.15&sort=Profit&volume=0&revenue=current&factor%5Bexchanges%5D%5B%5D=&factor%5Bexchanges%5D%5B%5D=bittrex&factor%5Bexchanges%5D%5B%5D=bleutrade&factor%5Bexchanges%5D%5B%5D=c_cex&factor%5Bexchanges%5D%5B%5D=cryptopia&factor%5Bexchanges%5D%5B%5D=poloniex&factor%5Bexchanges%5D%5B%5D=yobit&dataset=Main&commit=Calculate"

That's for a 8 card 1070 Rig. If it fits to your rig feel free to use it.

[kk003]

Only thing I don't understand is:

#Click calculate, then add .json to coins at the begining of the address after you click calculate!!!

I have two rigs, one with Nvoc 19 and other with centos7 (no switch there) and I may be interested in adding the switch once I fully understand how it works.  

When you set your cards, hash rate, profit, difficulty ,... on whattomine.com and click calculate it creates a link for your settings, then you should add .json to make it readable by the script.

created link is some thing like this :

Code:

https://whattomine.com/coins?utf8=✓&adapt_q_280x .....

you make it readable for script by changing coins to coins.json like this

Code:

https://whattomine.com/coins.json?utf8=✓&adapt_q_280x ... 

Ok. Do you mean var WTM_AUTO_SWITCH_URL must contain that link with the .json modification?

Jepp. Thats it. Like

Code:

WTM_AUTO_SWITCH_URL="https://whattomine.com/coins.json?utf8=%E2%9C%93&adapt_q_280x=0&adapt_q_380=0&adapt_q_fury=0&adapt_q_470=0&adapt_q_480=0&adapt_q_570=0&adapt_q_580=0&adapt_q_750Ti=0&adapt_q_1050Ti=0&adapt_q_10606=0&adapt_q_1070=8&adapt_1070=true&adapt_q_1080=0&adapt_q_1080Ti=0&eth=true&factor%5Beth_hr%5D=240.0&factor%5Beth_p%5D=960.0&grof=true&factor%5Bgro_hr%5D=284.0&factor%5Bgro_p%5D=1040.0&x11gf=true&factor%5Bx11g_hr%5D=92.0&factor%5Bx11g_p%5D=960.0&cn=true&factor%5Bcn_hr%5D=4000.0&factor%5Bcn_p%5D=800.0&eq=true&factor%5Beq_hr%5D=3440.0&factor%5Beq_p%5D=960.0&lre=true&factor%5Blrev2_hr%5D=284000.0&factor%5Blrev2_p%5D=1040.0&ns=true&factor%5Bns_hr%5D=8400.0&factor%5Bns_p%5D=1240.0&lbry=true&factor%5Blbry_hr%5D=2160.0&factor%5Blbry_p%5D=960.0&bk2bf=true&factor%5Bbk2b_hr%5D=12800.0&factor%5Bbk2b_p%5D=960.0&bk14=true&factor%5Bbk14_hr%5D=20000.0&factor%5Bbk14_p%5D=1000.0&pas=true&factor%5Bpas_hr%5D=7520.0&factor%5Bpas_p%5D=960.0&skh=true&factor%5Bskh_hr%5D=212.0&factor%5Bskh_p%5D=960.0&factor%5Bl2z_hr%5D=420.0&factor%5Bl2z_p%5D=300.0&factor%5Bcost%5D=0.15&sort=Profit&volume=0&revenue=current&factor%5Bexchanges%5D%5B%5D=&factor%5Bexchanges%5D%5B%5D=bittrex&factor%5Bexchanges%5D%5B%5D=bleutrade&factor%5Bexchanges%5D%5B%5D=c_cex&factor%5Bexchanges%5D%5B%5D=cryptopia&factor%5Bexchanges%5D%5B%5D=poloniex&factor%5Bexchanges%5D%5B%5D=yobit&dataset=Main&commit=Calculate"

That's for a 8 card 1070 Rig. If it fits to your rig feel free to use it.

Ok, thx. If may I comment, I think that this point should be a little better explained in 1bash's comments.

From where can I download the latest files for the switch?. I have 19.1-4 uncompressed.

[woodl1]

hey, people, please tell me - is it only me who's horrified by necessity of downloading 5+Gb from single server in the end of 2017 year?

[gs777]

Guys can you help me please
My rig has been crashed and couldn't reboot itself
this was last message

Code:

     
GPU_COUNT:  13

GPU UTILIZATION:  Unable to determine the device handle for GPU 0000:0B:00.0: GPU is lost. Reboot the system to recover this GPU
Sun Nov 12 12:24:15 EST 2017 - Lost GPU so restarting system. Found GPU's:
Unable to determine the device handle for GPU 0000:0B:00.0: GPU is lost.  Reboot the system to recover this GPU


Sun Nov 12 12:24:15 EST 2017 - reboot in 10 seconds

It has happen few times, since I was away from my rigs
it cost me massive down time
Eventually it was power cycled and manually rebooted


Is it because OC (gtx1080 pl150 cc0 mc600)?
or something else
 

[Spiffy_1]

Stupid Question Alert!

I'm primarily a windows user, and I use a razor mouse, model rc30-006501.  Linux will not detect this mouse.  I can't figure it out.  I use different usb ports, enable legacy usb / disasble legacy usb in bios, and still no luck.  Plug in half broken P.O.S. generic walmart mouse with wheel that barely spins, detected.  plug razor into same slot.. No go.  Don't make me dig out my trackball lol.

Serious note, I have no linux nohow to fix this, so if it isn't a plug and play fix I can't really access a terminal to do command line stuff without a mouse.

thanks for suggestions.

Side note, this is with nvoc 19-14

[Stubo]

Stupid Question Alert!

I'm primarily a windows user, and I use a razor mouse, model rc30-006501.  Linux will not detect this mouse.  I can't figure it out.  I use different usb ports, enable legacy usb / disasble legacy usb in bios, and still no luck.  Plug in half broken P.O.S. generic walmart mouse with wheel that barely spins, detected.  plug razor into same slot.. No go.  Don't make me dig out my trackball lol.

Serious note, I have no linux nohow to fix this, so if it isn't a plug and play fix I can't really access a terminal to do command line stuff without a mouse.

thanks for suggestions.

Side note, this is with nvoc 19-14

I guess my counter would be why do you need a local display anyway? Beyond my first installation of nvOC 19.0 a few months back, I have been running headless on all of my rigs. With SSH, you can do everything necessary as long as you set LOCALorREMOTE="REMOTE" in 1bash. I have used unix based systems for many years in my line of work and rarely had console access. Give me putty, WinSCP, and Xming and I can do anything on nvOC without a locally attached display.

[papampi]

Guys can you help me please
My rig has been crashed and couldn't reboot itself
this was last message

Code:

     
GPU_COUNT:  13

GPU UTILIZATION:  Unable to determine the device handle for GPU 0000:0B:00.0: GPU is lost. Reboot the system to recover this GPU
Sun Nov 12 12:24:15 EST 2017 - Lost GPU so restarting system. Found GPU's:
Unable to determine the device handle for GPU 0000:0B:00.0: GPU is lost.  Reboot the system to recover this GPU


Sun Nov 12 12:24:15 EST 2017 - reboot in 10 seconds

It has happen few times, since I was away from my rigs
it cost me massive down time
Eventually it was power cycled and manually rebooted


Is it because OC (gtx1080 pl150 cc0 mc600)?
or something else
 

One of my 1070 gpu used to act the same and I fixed it by changing riser (both sides), USB cable and the molex power cable
Don't know which one was faulty

[gs777]

Guys can you help me please
My rig has been crashed and couldn't reboot itself
this was last message

Code:

     
GPU_COUNT:  13

GPU UTILIZATION:  Unable to determine the device handle for GPU 0000:0B:00.0: GPU is lost. Reboot the system to recover this GPU
Sun Nov 12 12:24:15 EST 2017 - Lost GPU so restarting system. Found GPU's:
Unable to determine the device handle for GPU 0000:0B:00.0: GPU is lost.  Reboot the system to recover this GPU


Sun Nov 12 12:24:15 EST 2017 - reboot in 10 seconds

It has happen few times, since I was away from my rigs
it cost me massive down time
Eventually it was power cycled and manually rebooted


Is it because OC (gtx1080 pl150 cc0 mc600)?
or something else
 

One of my 1070 gpu used to act the same and I fixed it by changing riser (both sides), USB cable and the molex power cable
Don't know which one was faulty

I'll try to replace riser, hope it will help
Thanks for tip

[jmayniac]

Guys can you help me please
My rig has been crashed and couldn't reboot itself
this was last message

Code:

     
GPU_COUNT:  13

GPU UTILIZATION:  Unable to determine the device handle for GPU 0000:0B:00.0: GPU is lost. Reboot the system to recover this GPU
Sun Nov 12 12:24:15 EST 2017 - Lost GPU so restarting system. Found GPU's:
Unable to determine the device handle for GPU 0000:0B:00.0: GPU is lost.  Reboot the system to recover this GPU


Sun Nov 12 12:24:15 EST 2017 - reboot in 10 seconds

It has happen few times, since I was away from my rigs
it cost me massive down time
Eventually it was power cycled and manually rebooted


Is it because OC (gtx1080 pl150 cc0 mc600)?
or something else
 

I have the exact same problem with my rig, but it picks a card at random to "lose".  I've replaced all the risers and usb cables and still get the same problem.  I thought it might be power related, but I am only at 550w each on my 2 x 750w power supplies.  I still haven't been able to figure it out.

[Spiffy_1]

Stupid Question Alert!

I'm primarily a windows user, and I use a razor mouse, model rc30-006501.  Linux will not detect this mouse.  I can't figure it out.  I use different usb ports, enable legacy usb / disasble legacy usb in bios, and still no luck.  Plug in half broken P.O.S. generic walmart mouse with wheel that barely spins, detected.  plug razor into same slot.. No go.  Don't make me dig out my trackball lol.

Serious note, I have no linux nohow to fix this, so if it isn't a plug and play fix I can't really access a terminal to do command line stuff without a mouse.

thanks for suggestions.

Side note, this is with nvoc 19-14

I guess my counter would be why do you need a local display anyway? Beyond my first installation of nvOC 19.0 a few months back, I have been running headless on all of my rigs. With SSH, you can do everything necessary as long as you set LOCALorREMOTE="REMOTE" in 1bash. I have used unix based systems for many years in my line of work and rarely had console access. Give me putty, WinSCP, and Xming and I can do anything on nvOC without a locally attached display.

Short answer, because every time I've set it up in 1bash using windows, it fails to mine for my account, and I wanted to verify it is indeed mining before I turn it loose as headless.  So I set it up to mine ETH and it turns around and mines ZEC for someone else.  So if I can access the 1bash scrypt under linux I can fix this minor problem except I don't have a  mouse.  And I also believe I mentioned zero linux knowledge so being able to verify its working before I turn it loose and learn how to connect to it in another way would be ideal.  But since I don't have a mouse that detects I was looking for an idea.

[Stubo]

Stupid Question Alert!

I'm primarily a windows user, and I use a razor mouse, model rc30-006501.  Linux will not detect this mouse.  I can't figure it out.  I use different usb ports, enable legacy usb / disasble legacy usb in bios, and still no luck.  Plug in half broken P.O.S. generic walmart mouse with wheel that barely spins, detected.  plug razor into same slot.. No go.  Don't make me dig out my trackball lol.

Serious note, I have no linux nohow to fix this, so if it isn't a plug and play fix I can't really access a terminal to do command line stuff without a mouse.

thanks for suggestions.

Side note, this is with nvoc 19-14

I guess my counter would be why do you need a local display anyway? Beyond my first installation of nvOC 19.0 a few months back, I have been running headless on all of my rigs. With SSH, you can do everything necessary as long as you set LOCALorREMOTE="REMOTE" in 1bash. I have used unix based systems for many years in my line of work and rarely had console access. Give me putty, WinSCP, and Xming and I can do anything on nvOC without a locally attached display.

Short answer, because every time I've set it up in 1bash using windows, it fails to mine for my account, and I wanted to verify it is indeed mining before I turn it loose as headless.  So I set it up to mine ETH and it turns around and mines ZEC for someone else.  So if I can access the 1bash scrypt under linux I can fix this minor problem except I don't have a  mouse.  And I also believe I mentioned zero linux knowledge so being able to verify its working before I turn it loose and learn how to connect to it in another way would be ideal.  But since I don't have a mouse that detects I was looking for an idea.

Fair enough. This is not an nvOC specific problem though since nvOC is built on Ubuntu. What I would suggest you do is search the web for "Ubuntu razer mouse". I just did and came up with several hits. One of which said it is not supported - but I am not sure if that is applicable to your model.

Hope this helps.

[NameTaken]

I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?

[papampi]

I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?

No.

[NameTaken]

I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?

No.

Care to elaborate?

[papampi]

I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?

No.

Care to elaborate?

It's the main setting for all the scripts running in nvOC, you can't remove it and expect them to run
You don't like it, you should use Ubuntu with no modifications

[NameTaken]

I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?

No.

Care to elaborate?

It's the main setting for all the scripts running in nvOC, you can't remove it and expect them to run
You don't like it, you should use Ubuntu with no modifications

I don't want any scripts to run which is why I want to remove it.

[papampi]

I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?

No.

Care to elaborate?

It's the main setting for all the scripts running in nvOC, you can't remove it and expect them to run
You don't like it, you should use Ubuntu with no modifications

I don't want any scripts to run which is why I want to remove it.

Thats why I suggest to use standard Ubuntu or any other linux distro
You cant say I dont like windows control panel, can I remove it and make my own control panel?
nvOC is written to run those scripts, it will make so many problems without 1bash

[NameTaken]

I want to use this OS but not 1bash. Can I delete the config file and configure everything my own way without problem?

No.

Care to elaborate?

It's the main setting for all the scripts running in nvOC, you can't remove it and expect them to run
You don't like it, you should use Ubuntu with no modifications

I don't want any scripts to run which is why I want to remove it.

Thats why I suggest to use standard Ubuntu or any other linux distro
You cant say I dont like windows control panel, can I remove it and make my own control panel?
nvOC is written to run those scripts, it will make so many problems without 1bash

Then how to make 1bash do the minimum it needs to do and nothing more?