sunk818
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2018, 06:24:16 PM |
|
I mean,i will install Virtual Box and inside it Windows 10,now.....moonlander could work? Or it need an “hardware” machine to run? Haven't tried so I am not sure. You can install Ubuntu 16.0.4 in Virtual Box too.
|
|
|
|
achtung082
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2018, 09:28:45 PM |
|
New image worked first time. Haven't tried anything crazy yet. I will start cranking them up over the weekend. Do you mind sharing the details of your hub? I bought two Sipolar A-400 and after about two months of use, both power plugs are acting up. Won't get power if you stick it in all the way. Trying to see if I can find a cheaper alternative that is reliable up 150W (10 devices). They are modified cheap ebay usb 2.0 hubs with added + and - cables soldered directly to the USB pins, connected to a ATX molex plug.
|
Support sidehack projects: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr My Sales Wallet BTC:bc1qxtxsc86lessnrsm52gf7qgmqle75htdr03zdd7 - LTC:LNLKyKkGNCJakZudGjc2qg26yYz7oeo92k - ETH:0xDf1b17872D9Ff22F04270BbDA13556B3E1649E27
|
|
|
Darkhand
Newbie
Offline
Activity: 26
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2018, 05:27:25 AM Last edit: February 07, 2018, 06:04:00 AM by Darkhand |
|
I'm trying to mine a Scrypt-N coin that is currently on par with LTC in terms of intensity, but I'm getting 100% share rejections. It's looking like the difficulty of the coin or pool is too low... The ASIC is mining in the millions range and the pool is calling for lower: [2018-02-06 23:23:54] Rejected 030410ce MLD 0 Diff 1m/488u (low difficulty share of 0.00) [2018-02-06 23:23:55] Rejected 062cc4b2 MLD 0 Diff 632u/488u (low difficulty share of 0.00) [2018-02-06 23:23:55] Rejected 00102c2b MLD 0 Diff 61m/488u (low difficulty share of 0.00) [2018-02-06 23:23:55] Rejected 02271fdd MLD 0 Diff 1m/488u (low difficulty share of 0.00) [2018-02-06 23:23:56] Rejected 0538cb7a MLD 0 Diff 748u/488u (low difficulty share of 0.00) [2018-02-06 23:23:57] Rejected 00d70fca MLD 0 Diff 4m/488u (low difficulty share of 0.00) [2018-02-06 23:23:58] Rejected 03a9fadc MLD 0 Diff 1m/488u (low difficulty share of 0.00) Is this an actual difficulty issue, or is the ASIC not handling Scrypt-N even with intensity the same as LTC? With even old KNC Titans getting new firmware to handle Scrypt-N, can the Moonlander 2 handle it?
|
|
|
|
Fenboy
Newbie
Offline
Activity: 84
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2018, 07:09:27 AM |
|
I don’t think the Moonlanders can mine Scypt-N, only Scrypt
|
|
|
|
sunk818
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2018, 08:56:35 AM |
|
Yeah you can't mint garlic coin because scrypt-n is asic resistant and can't use moonlander2 to mine.
|
|
|
|
TheBiondo
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2018, 11:52:39 AM Last edit: February 07, 2018, 07:54:52 PM by TheBiondo |
|
I mean,i will install Virtual Box and inside it Windows 10,now.....moonlander could work? Or it need an “hardware” machine to run? Haven't tried so I am not sure. You can install Ubuntu 16.0.4 in Virtual Box too. i have install virtual box and then ubuntu...i try to instal the UART driver but....i'm completely new at linux,how can i compile it? i try to read the note but i'm not able to do anything...... ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) EDIT: I have windows 10 running over VirtualBox (over OS X 10.11.6),under the virtual machine the stick work great. I have set up 796 clock,core .75 volt and memory .85 volt,it work at 6.26 Mh/s (from bfgminer report,litecoinpool worker is at 4,463 H/s) and HW Error at .79%~.80% What do you think about it? Daniele
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2018, 09:07:03 PM |
|
I mean,i will install Virtual Box and inside it Windows 10,now.....moonlander could work? Or it need an “hardware” machine to run? Haven't tried so I am not sure. You can install Ubuntu 16.0.4 in Virtual Box too. i have install virtual box and then ubuntu...i try to instal the UART driver but....i'm completely new at linux,how can i compile it? i try to read the note but i'm not able to do anything...... ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) EDIT: I have windows 10 running over VirtualBox (over OS X 10.11.6),under the virtual machine the stick work great. I have set up 796 clock,core .75 volt and memory .85 volt,it work at 6.26 Mh/s (from bfgminer report,litecoinpool worker is at 4,463 H/s) and HW Error at .79%~.80% What do you think about it? Daniele Looks good to me...for linux you don't need the UART driver...its already part of the kernel. and mac os support is 10.12 and 10.13 (with UART driver workaround posted in OP). 10.11 is NOT supported.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2018, 09:09:43 PM |
|
. I noticed you updated bfgminer to 5.5 for your fork. 1) Will you be releasing new binaries soon? Any advantage to 5.5 for ML2 users? 2) Can we configure to include GPU with your fork? Yes, I'm testing the 5.5 updates first to make sure there are no issues, and then updating my driver with additional fixes/features. Should have new binaries up by friday hopefully. My binaries have a lot of stuff stripped including GPU stuff in order to keep issues at a minimum, but you can compile on your own if you want GPU support etc and should work.
|
|
|
|
lennyNO
Newbie
Offline
Activity: 76
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2018, 10:33:13 PM |
|
I have 11 mld2s, all on one hub. No problems, until yesterday. Now one MLD isn't well recognised by the hub anymore (irrespective of the USB port I put it on): sometimes it does not show up in windows COM drivers (and I get error message 'unrecognised device' or something like that), sometimes it does but it refuses to communicate (the yellow light maybe flashes once but that's it, and it does not show as a MLD device in bfgminer). First I thought the USB chip on the MLD was semi-fried for some strange reason.
Now, when I plug that same device in a USB port directly on my PC (same PC as the hub with the remaining 10 MLDs is connected to), it works fine, it is properly recognized by windows and hashes away just fine. I have tried powering my hub on/off etc, but didn't help. It drives me nuts. So I guess it is something in the hub, but it can then only the hub controller because the power and the individual usb ports are fine by themselves. It's a 19 port Eyeboot hub, I think jstephanop also said that eyeboot hubs are not the greatest (when stretched).
|
|
|
|
cryptochris
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2018, 11:58:43 PM |
|
Awesome case design, would you mind sharing the .STL? Would love to print this out for mine. Currently have two, but one more is on the way! Thanks!
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2018, 12:58:21 AM |
|
I have 11 mld2s, all on one hub. No problems, until yesterday. Now one MLD isn't well recognised by the hub anymore (irrespective of the USB port I put it on): sometimes it does not show up in windows COM drivers (and I get error message 'unrecognised device' or something like that), sometimes it does but it refuses to communicate (the yellow light maybe flashes once but that's it, and it does not show as a MLD device in bfgminer). First I thought the USB chip on the MLD was semi-fried for some strange reason.
Now, when I plug that same device in a USB port directly on my PC (same PC as the hub with the remaining 10 MLDs is connected to), it works fine, it is properly recognized by windows and hashes away just fine. I have tried powering my hub on/off etc, but didn't help. It drives me nuts. So I guess it is something in the hub, but it can then only the hub controller because the power and the individual usb ports are fine by themselves. It's a 19 port Eyeboot hub, I think jstephanop also said that eyeboot hubs are not the greatest (when stretched).
Try holding it down when plugged into the eyeboot hub...its most likely not making a good USB connection, and the fan vibrations etc are making it disconnect. For some reason the eyeboot USB ports can get deformed easily, and then the sticks don't make good contact.
|
|
|
|
BurtNasty
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2018, 03:46:45 AM |
|
***Noob question***
Hey everyone!
I just received my 1st MLD2 yesterday and I had it up and running in no time! It was working fine for the last 24 hours until I tried to add an antrouter to Litecoinpool.org. I created a second worker on litepool for the antrouter, plugged in the pool address stratum+tcp://us.litecoinpool.org:3333, and then bam as soon as that thing started mining my MLD2 stopped mining.
[2018-02-07 21:32:44] No servers were found that could be used to get work from. [2018-02-07 21:32:44] Please check the details from the list below of the servers you have input [2018-02-07 21:32:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [2018-02-07 21:32:44] Pool: 0 URL: stratum+tcp://us.litecoinpool.org:3333 User: BurtNasty.1 Password: 1,d=128
This is what I have in the batch file:
bfgminer.exe --scrypt -o stratum+tcp://us.litecoinpool.org:3333 -u BurtNasty.1 -p 1,d=128 -S MLD:all --set MLD:clock=600 pause
I have tried the following: Restarting BFG Miner -lights flash for a few seconds then just the green light stays constant. Deleting and reinstalling the drivers Deleting all workers except my original which is what the MLD was working under. unplugging and resetting antrouters Starting over from scratch
None of these had any effect, and now all three of my miners are not working! all three miners are brand new.
Can someone please help me get back to mining again. I apologize if this was posted before, i tried to do a search.
|
|
|
|
cryptochris
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2018, 06:06:58 AM |
|
***Noob question***
Hey everyone!
I just received my 1st MLD2 yesterday and I had it up and running in no time! It was working fine for the last 24 hours until I tried to add an antrouter to Litecoinpool.org. I created a second worker on litepool for the antrouter, plugged in the pool address stratum+tcp://us.litecoinpool.org:3333, and then bam as soon as that thing started mining my MLD2 stopped mining.
[2018-02-07 21:32:44] No servers were found that could be used to get work from. [2018-02-07 21:32:44] Please check the details from the list below of the servers you have input [2018-02-07 21:32:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [2018-02-07 21:32:44] Pool: 0 URL: stratum+tcp://us.litecoinpool.org:3333 User: BurtNasty.1 Password: 1,d=128
This is what I have in the batch file:
bfgminer.exe --scrypt -o stratum+tcp://us.litecoinpool.org:3333 -u BurtNasty.1 -p 1,d=128 -S MLD:all --set MLD:clock=600 pause
I have tried the following: Restarting BFG Miner -lights flash for a few seconds then just the green light stays constant. Deleting and reinstalling the drivers Deleting all workers except my original which is what the MLD was working under. unplugging and resetting antrouters Starting over from scratch
None of these had any effect, and now all three of my miners are not working! all three miners are brand new.
Can someone please help me get back to mining again. I apologize if this was posted before, i tried to do a search.
I had a similar issue with just using BFGminer by itself. There's a pool that I mine regularly with my Gridseed Rig (yes, I still have those) But when I'd put the info into my .bat file, it would tell me the same thing "No servers were found that could be used to get work from....." I know it works, because my Gridseed Rig was mining it and I copied/pasted info, so there were no typos. I use MultiMiner for my Gridseed Rig, so I put it on my laptop which is where I've been using my MLD's, and upgraded the BFGminer to the one with the MLD drivers. I imported my 'coin config' file and started mining the pool that I was having issues with in BFGminer by itself using the .bat file. I've been mining to the pool ever since without issues @ a 756clock on stock pot settings and stock fans. Still, to this day, I'll get curious and try BFGminer's .bat to that pool and it still wont go. I can use the .bat file to hit any other pool I belong to, no problem. Just one pool. Totally weird. Officially stopped worrying about it, since I prefer MultiMiner anyway.
|
|
|
|
BurtNasty
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2018, 03:26:58 PM |
|
***Noob question***
Hey everyone!
I just received my 1st MLD2 yesterday and I had it up and running in no time! It was working fine for the last 24 hours until I tried to add an antrouter to Litecoinpool.org. I created a second worker on litepool for the antrouter, plugged in the pool address stratum+tcp://us.litecoinpool.org:3333, and then bam as soon as that thing started mining my MLD2 stopped mining.
[2018-02-07 21:32:44] No servers were found that could be used to get work from. [2018-02-07 21:32:44] Please check the details from the list below of the servers you have input [2018-02-07 21:32:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [2018-02-07 21:32:44] Pool: 0 URL: stratum+tcp://us.litecoinpool.org:3333 User: BurtNasty.1 Password: 1,d=128
This is what I have in the batch file:
bfgminer.exe --scrypt -o stratum+tcp://us.litecoinpool.org:3333 -u BurtNasty.1 -p 1,d=128 -S MLD:all --set MLD:clock=600 pause
I have tried the following: Restarting BFG Miner -lights flash for a few seconds then just the green light stays constant. Deleting and reinstalling the drivers Deleting all workers except my original which is what the MLD was working under. unplugging and resetting antrouters Starting over from scratch
None of these had any effect, and now all three of my miners are not working! all three miners are brand new.
Can someone please help me get back to mining again. I apologize if this was posted before, i tried to do a search.
I had a similar issue with just using BFGminer by itself. There's a pool that I mine regularly with my Gridseed Rig (yes, I still have those) But when I'd put the info into my .bat file, it would tell me the same thing "No servers were found that could be used to get work from....." I know it works, because my Gridseed Rig was mining it and I copied/pasted info, so there were no typos. I use MultiMiner for my Gridseed Rig, so I put it on my laptop which is where I've been using my MLD's, and upgraded the BFGminer to the one with the MLD drivers. I imported my 'coin config' file and started mining the pool that I was having issues with in BFGminer by itself using the .bat file. I've been mining to the pool ever since without issues @ a 756clock on stock pot settings and stock fans. Still, to this day, I'll get curious and try BFGminer's .bat to that pool and it still wont go. I can use the .bat file to hit any other pool I belong to, no problem. Just one pool. Totally weird. Officially stopped worrying about it, since I prefer MultiMiner anyway. Ok, I downloaded Multiminer and on startup it goes to automatically download BFGminer i get the following error msg: Error code 0x80004005 Online Error Code Explanation: This problem may occur if a file that the Windows Product Activation (WPA) requires is damaged or missing. This behavior occurs if one or both of the following conditions are true: A third-party backup utility or an antivirus program interferes with the installation of Windows XP. A file that WPA requires is manually modified. I've tried disabling my antivirus and manually installing BFGminer to Path\To\MultiMiner\Miners\BFGMiner. Still Nothing.... I have an older laptop I use for BTC mining, so i tired to setup the MLD2 on it to see if my new laptop was the issue and i get the same original error message that i posted yesterday from BFGminer..... I am unbelievably frustrated... I'm almost to the point where if anyone wants to come to the house to help me i can pay in beer... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I have another MLD2 out for delivery today, when it comes in i will try that one to see if the issue is the MLD itself (i doubt it)
|
|
|
|
elamast
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2018, 03:46:18 PM |
|
I'm almost to the point where if anyone wants to come to the house to help me i can pay in beer... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) You're speaking my language (free beer) if you're close enough. City and State?
|
|
|
|
cryptochris
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2018, 04:09:12 PM |
|
***Noob question***
Hey everyone!
I just received my 1st MLD2 yesterday and I had it up and running in no time! It was working fine for the last 24 hours until I tried to add an antrouter to Litecoinpool.org. I created a second worker on litepool for the antrouter, plugged in the pool address stratum+tcp://us.litecoinpool.org:3333, and then bam as soon as that thing started mining my MLD2 stopped mining.
[2018-02-07 21:32:44] No servers were found that could be used to get work from. [2018-02-07 21:32:44] Please check the details from the list below of the servers you have input [2018-02-07 21:32:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [2018-02-07 21:32:44] Pool: 0 URL: stratum+tcp://us.litecoinpool.org:3333 User: BurtNasty.1 Password: 1,d=128
This is what I have in the batch file:
bfgminer.exe --scrypt -o stratum+tcp://us.litecoinpool.org:3333 -u BurtNasty.1 -p 1,d=128 -S MLD:all --set MLD:clock=600 pause
I have tried the following: Restarting BFG Miner -lights flash for a few seconds then just the green light stays constant. Deleting and reinstalling the drivers Deleting all workers except my original which is what the MLD was working under. unplugging and resetting antrouters Starting over from scratch
None of these had any effect, and now all three of my miners are not working! all three miners are brand new.
Can someone please help me get back to mining again. I apologize if this was posted before, i tried to do a search.
I had a similar issue with just using BFGminer by itself. There's a pool that I mine regularly with my Gridseed Rig (yes, I still have those) But when I'd put the info into my .bat file, it would tell me the same thing "No servers were found that could be used to get work from....." I know it works, because my Gridseed Rig was mining it and I copied/pasted info, so there were no typos. I use MultiMiner for my Gridseed Rig, so I put it on my laptop which is where I've been using my MLD's, and upgraded the BFGminer to the one with the MLD drivers. I imported my 'coin config' file and started mining the pool that I was having issues with in BFGminer by itself using the .bat file. I've been mining to the pool ever since without issues @ a 756clock on stock pot settings and stock fans. Still, to this day, I'll get curious and try BFGminer's .bat to that pool and it still wont go. I can use the .bat file to hit any other pool I belong to, no problem. Just one pool. Totally weird. Officially stopped worrying about it, since I prefer MultiMiner anyway. Ok, I downloaded Multiminer and on startup it goes to automatically download BFGminer i get the following error msg: Error code 0x80004005 Online Error Code Explanation: This problem may occur if a file that the Windows Product Activation (WPA) requires is damaged or missing. This behavior occurs if one or both of the following conditions are true: A third-party backup utility or an antivirus program interferes with the installation of Windows XP. A file that WPA requires is manually modified. I've tried disabling my antivirus and manually installing BFGminer to Path\To\MultiMiner\Miners\BFGMiner. Still Nothing.... I have an older laptop I use for BTC mining, so i tired to setup the MLD2 on it to see if my new laptop was the issue and i get the same original error message that i posted yesterday from BFGminer..... I am unbelievably frustrated... I'm almost to the point where if anyone wants to come to the house to help me i can pay in beer... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I have another MLD2 out for delivery today, when it comes in i will try that one to see if the issue is the MLD itself (i doubt it) After you install Multiminer, you need to open up the install folder, MultiMiner->Miners->BFGminer and remove all those files and replace them with the MLD version of BFGminer. Then when you launch MultiMiner, it'll see your MLD sticks and you can then start mining.
|
|
|
|
iamwillard
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2018, 10:43:04 PM |
|
I ordered and received 2 Moonlander 2s from asicpuppy. One of them works fine but the other seems to be dead on arrival. No matter how I connect it to my pc, the miner software will not detect the device. I reached out to asicpuppy support but haven't received any response. Anyone else have experiences with asicpuppy's support that can help? Thanks!
|
|
|
|
mtntraders
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/question.gif) |
February 09, 2018, 01:08:46 AM |
|
Hi, complete newbie here, noob, whatever....anywho, I have 3 MLD-2 and i would like to know how to configure to only use one per coin if so desired. -S MLD:All --set MLD:clock=756 pause So in other words, if I just wanted to start one, what would I put in place of "All" after MLD: any help would be greatly appreciated. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
cryptochris
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 09, 2018, 05:07:25 AM |
|
Hi, complete newbie here, noob, whatever....anywho, I have 3 MLD-2 and i would like to know how to configure to only use one per coin if so desired. -S MLD:All --set MLD:clock=756 pause So in other words, if I just wanted to start one, what would I put in place of "All" after MLD: any help would be greatly appreciated. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) you need 3 different .bat files, one for each coin. in place of the "All" you would put the MLD# you want to use for that coin. Go the easy route, download Multiminer, then when you install it, find the folder it's installed in, go in the Miners folder, there is a BFGminer folder in there, delete the contents, replace with the BFGminer you downloaded for the MLD's. That app lets you independently control your devices so you can set then to do different coins or the same coins. Nice user interface too.
|
|
|
|
hermi
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 09, 2018, 06:28:45 AM |
|
|
|
|
|
|