Official FutureBit Moonlander 2 Driver and Support Thread

[matti_dragomir]

I cant get the moonlander 2 to mine verge, can you please help.
My settings are: bfgminer.exe --scrypt -o stratum+tcp://yiimp.eu:3777/#skipcbcheck -u DPqXKHF9E8upV8ib4wTez8kmqKq2n8AiZV -p c=XVG -S MLD:all --set MLD:clock=600
pause

I keep getting errors like:
 [2018-02-16 09:09:05] Stratum from pool 0 detected new block
 [2018-02-16 09:09:07] Rejected 0014ec66 MLD 0  Diff 47m/32m (Invalid share)

[aarons6]

I cant get the moonlander 2 to mine verge, can you please help.
My settings are: bfgminer.exe --scrypt -o stratum+tcp://yiimp.eu:3777/#skipcbcheck -u DPqXKHF9E8upV8ib4wTez8kmqKq2n8AiZV -p c=XVG -S MLD:all --set MLD:clock=600
pause

I keep getting errors like:
 [2018-02-16 09:09:05] Stratum from pool 0 detected new block
 [2018-02-16 09:09:07] Rejected 0014ec66 MLD 0  Diff 47m/32m (Invalid share)

this isnt an error this means the pool detected a new block on the network but the work you were working on was from the old block.

[matti_dragomir]

I cant get the moonlander 2 to mine verge, can you please help.
My settings are: bfgminer.exe --scrypt -o stratum+tcp://yiimp.eu:3777/#skipcbcheck -u DPqXKHF9E8upV8ib4wTez8kmqKq2n8AiZV -p c=XVG -S MLD:all --set MLD:clock=600
pause

I keep getting errors like:
 [2018-02-16 09:09:05] Stratum from pool 0 detected new block
 [2018-02-16 09:09:07] Rejected 0014ec66 MLD 0  Diff 47m/32m (Invalid share)

this isnt an error this means the pool detected a new block on the network but the work you were working on was from the old block.

but I am not getting any shares...do you know why?

[matti_dragomir]

I cant get the moonlander 2 to mine verge, can you please help.
My settings are: bfgminer.exe --scrypt -o stratum+tcp://yiimp.eu:3777/#skipcbcheck -u DPqXKHF9E8upV8ib4wTez8kmqKq2n8AiZV -p c=XVG -S MLD:all --set MLD:clock=600
pause

I keep getting errors like:
 [2018-02-16 09:09:05] Stratum from pool 0 detected new block
 [2018-02-16 09:09:07] Rejected 0014ec66 MLD 0  Diff 47m/32m (Invalid share)

this isnt an error this means the pool detected a new block on the network but the work you were working on was from the old block.

also i am getting this:
[2018-02-16 09:26:27] Pool 0 is sending mismatched block contents to us (0 is not 8-15)

and all rejected, none accepted and o mh/s hash rate

 1            |  3.31/ 3.23/ 0.00Mh/s | A:0 R:8+0(100%) HW:1/.24%
------------------------------------------------------------------------------------------------------------------------
 MLD 0:       |  3.36/ 3.25/ 0.00Mh/s | A:0 R:9+0(100%) HW:1/.23%

[Patjebitcoin]

I cant get the moonlander 2 to mine verge, can you please help.
My settings are: bfgminer.exe --scrypt -o stratum+tcp://yiimp.eu:3777/#skipcbcheck -u DPqXKHF9E8upV8ib4wTez8kmqKq2n8AiZV -p c=XVG -S MLD:all --set MLD:clock=600
pause

I keep getting errors like:
 [2018-02-16 09:09:05] Stratum from pool 0 detected new block
 [2018-02-16 09:09:07] Rejected 0014ec66 MLD 0  Diff 47m/32m (Invalid share)

this isnt an error this means the pool detected a new block on the network but the work you were working on was from the old block.

also i am getting this:
[2018-02-16 09:26:27] Pool 0 is sending mismatched block contents to us (0 is not 8-15)

and all rejected, none accepted and o mh/s hash rate

 1            |  3.31/ 3.23/ 0.00Mh/s | A:0 R:8+0(100%) HW:1/.24%
------------------------------------------------------------------------------------------------------------------------
 MLD 0:       |  3.36/ 3.25/ 0.00Mh/s | A:0 R:9+0(100%) HW:1/.23%

Maybe that isn't a script pool.

[matti_dragomir]

I cant get the moonlander 2 to mine verge, can you please help.
My settings are: bfgminer.exe --scrypt -o stratum+tcp://yiimp.eu:3777/#skipcbcheck -u DPqXKHF9E8upV8ib4wTez8kmqKq2n8AiZV -p c=XVG -S MLD:all --set MLD:clock=600
pause

I keep getting errors like:
 [2018-02-16 09:09:05] Stratum from pool 0 detected new block
 [2018-02-16 09:09:07] Rejected 0014ec66 MLD 0  Diff 47m/32m (Invalid share)

this isnt an error this means the pool detected a new block on the network but the work you were working on was from the old block.

also i am getting this:
[2018-02-16 09:26:27] Pool 0 is sending mismatched block contents to us (0 is not 8-15)

and all rejected, none accepted and o mh/s hash rate

 1            |  3.31/ 3.23/ 0.00Mh/s | A:0 R:8+0(100%) HW:1/.24%
------------------------------------------------------------------------------------------------------------------------
 MLD 0:       |  3.36/ 3.25/ 0.00Mh/s | A:0 R:9+0(100%) HW:1/.23%

Maybe that isn't a script pool.

it is using x17 algo... anyway,can you give me a pool adress that uses scrypt so I can try that, or can you tell what changes should I do to my bfgminer settings?
Thank you !

[Patjebitcoin]

I cant get the moonlander 2 to mine verge, can you please help.
My settings are: bfgminer.exe --scrypt -o stratum+tcp://yiimp.eu:3777/#skipcbcheck -u DPqXKHF9E8upV8ib4wTez8kmqKq2n8AiZV -p c=XVG -S MLD:all --set MLD:clock=600
pause

I keep getting errors like:
 [2018-02-16 09:09:05] Stratum from pool 0 detected new block
 [2018-02-16 09:09:07] Rejected 0014ec66 MLD 0  Diff 47m/32m (Invalid share)

this isnt an error this means the pool detected a new block on the network but the work you were working on was from the old block.

also i am getting this:
[2018-02-16 09:26:27] Pool 0 is sending mismatched block contents to us (0 is not 8-15)

and all rejected, none accepted and o mh/s hash rate

 1            |  3.31/ 3.23/ 0.00Mh/s | A:0 R:8+0(100%) HW:1/.24%
------------------------------------------------------------------------------------------------------------------------
 MLD 0:       |  3.36/ 3.25/ 0.00Mh/s | A:0 R:9+0(100%) HW:1/.23%

Maybe that isn't a script pool.

it is using x17 algo... anyway,can you give me a pool adress that uses scrypt so I can try that, or can you tell what changes should I do to my bfgminer settings?
Thank you !

Nice pools for script mining..

hash-to-coins.com.  //. all scrypt pool
multipool.us
mining-dutch.nl
enz. enz..enz enz.

Happy mining..

[aarons6]

I cant get the moonlander 2 to mine verge, can you please help.
My settings are: bfgminer.exe --scrypt -o stratum+tcp://yiimp.eu:3777/#skipcbcheck -u DPqXKHF9E8upV8ib4wTez8kmqKq2n8AiZV -p c=XVG -S MLD:all --set MLD:clock=600
pause

I keep getting errors like:
 [2018-02-16 09:09:05] Stratum from pool 0 detected new block
 [2018-02-16 09:09:07] Rejected 0014ec66 MLD 0  Diff 47m/32m (Invalid share)

this isnt an error this means the pool detected a new block on the network but the work you were working on was from the old block.

also i am getting this:
[2018-02-16 09:26:27] Pool 0 is sending mismatched block contents to us (0 is not 8-15)

and all rejected, none accepted and o mh/s hash rate

 1            |  3.31/ 3.23/ 0.00Mh/s | A:0 R:8+0(100%) HW:1/.24%
------------------------------------------------------------------------------------------------------------------------
 MLD 0:       |  3.36/ 3.25/ 0.00Mh/s | A:0 R:9+0(100%) HW:1/.23%

Maybe that isn't a script pool.

it is using x17 algo... anyway,can you give me a pool adress that uses scrypt so I can try that, or can you tell what changes should I do to my bfgminer settings?
Thank you !

these wont mine x17.. to mine verge you need to mine a scrypt pool like this one
https://verge-scrypt.miningpoolhub.com/

[JAUER]

It used to be hovering around 4.2 - 4.8 although now is around 2.3... any ideas?

Has anything changed in your setup? Low hash rate is usually because you don't provide enough power to device (added another USB device?) or the device is overheating. You need better cooling or turn down the frequency. What happens when you unplug for 5 minutes... does hash rate go back up?

Nothing has changed... I tried unplugging it and rebooting the whole thing - nothing. The power was working fin before, and nothing has changed, so I can't think what it would be...

[Finless]

I have another MLD on the way so this will be my 2nd one.
Loving the first one


So I have a question that I cannot seem to find the answer.

OS in Windows 10 Pro 64 bit.

None of the readme's talk about the -S MLD: and --set MLD commands.  In detail anyway. I usually like to try to figure out things on my own but not a lot of help in the readme.

1) How do I set different clock speeds per MLD?  I spotted a few posts that talk about COM ports but cannot quite understand it. I realize I don't use -S MLD:all but what is the format per MLD?  Maybe an example to set MLD 0 to clock 796 and MLD 1 to 600?

2) Can you set one MLD for a different coin than another?

3) If you have to mine the same coin, can you use a different pool per MLD?

Sorry for questions that may have already been answered.  I tried reading through all the posts but 55 pages your eye go screwy
If there is a readme on this or a post you can refer me to, that would be great too!

Thanks,
Bob

[matti_dragomir]

I cant get the moonlander 2 to mine verge, can you please help.
My settings are: bfgminer.exe --scrypt -o stratum+tcp://yiimp.eu:3777/#skipcbcheck -u DPqXKHF9E8upV8ib4wTez8kmqKq2n8AiZV -p c=XVG -S MLD:all --set MLD:clock=600
pause

I keep getting errors like:
 [2018-02-16 09:09:05] Stratum from pool 0 detected new block
 [2018-02-16 09:09:07] Rejected 0014ec66 MLD 0  Diff 47m/32m (Invalid share)

this isnt an error this means the pool detected a new block on the network but the work you were working on was from the old block.

also i am getting this:
[2018-02-16 09:26:27] Pool 0 is sending mismatched block contents to us (0 is not 8-15)

and all rejected, none accepted and o mh/s hash rate

 1            |  3.31/ 3.23/ 0.00Mh/s | A:0 R:8+0(100%) HW:1/.24%
------------------------------------------------------------------------------------------------------------------------
 MLD 0:       |  3.36/ 3.25/ 0.00Mh/s | A:0 R:9+0(100%) HW:1/.23%

Maybe that isn't a script pool.

it is using x17 algo... anyway,can you give me a pool adress that uses scrypt so I can try that, or can you tell what changes should I do to my bfgminer settings?
Thank you !

these wont mine x17.. to mine verge you need to mine a scrypt pool like this one
https://verge-scrypt.miningpoolhub.com/

Ok, thank you !

[jstefanop]

It used to be hovering around 4.2 - 4.8 although now is around 2.3... any ideas?

Has anything changed in your setup? Low hash rate is usually because you don't provide enough power to device (added another USB device?) or the device is overheating. You need better cooling or turn down the frequency. What happens when you unplug for 5 minutes... does hash rate go back up?

Nothing has changed... I tried unplugging it and rebooting the whole thing - nothing. The power was working fin before, and nothing has changed, so I can't think what it would be...

Thats normal, especially if its been running straight for a really long time. Some cores will destabilize and shutdown eventually. Driver has a fix for a complete core stall, but not drop in hashrate yet. Will have this fix in on the next release.

[dvsrk]

Can someone suggest me the best pool out of the following?

litecoinpool.org
f2pool.com

does anyone has any insights among these two mining pools?

Thanks

[Game_of_Coins]

One of my sticks from bitshopper is allways at cca. 10% HW errors. 8.5% was lowest I saw after 60mins and it stays arround 8.5-8.6%. I didn't tune anything but tried another way. Started at lowest clock @384, than @450... all the way up to 700, but allways is the same. VCORE=0.77V, VMEM=0.84V. I use Sipolar A-400 hub, only with this one stick in it for testing. Is it stick problem or should I try to tune it? Just need direction 'cause stock voltages looks ok, at least for clock speeds up to 600MHz...

[Benzzino]

I am having problems with the moonlanders stop hashing. Once 2-3 of them stop they don’t seem to want to restart. I tried different clock speeds and always have 1-3 of them stop. Bfgminer keeps saying it’s trying to restart them with no luck. Any suggestions?

[jstefanop]

I am having problems with the moonlanders stop hashing. Once 2-3 of them stop they don’t seem to want to restart. I tried different clock speeds and always have 1-3 of them stop. Bfgminer keeps saying it’s trying to restart them with no luck. Any suggestions?

Your hub is not providing enough power. Try lowering voltages/freq.

[Benzzino]

I am having problems with the moonlanders stop hashing. Once 2-3 of them stop they don’t seem to want to restart. I tried different clock speeds and always have 1-3 of them stop. Bfgminer keeps saying it’s trying to restart them with no luck. Any suggestions?

Your hub is not providing enough power. Try lowering voltages/freq.

I am using the eyeboot 49 port self powered hub with 20 miners, maybe I will try removing a few and lowering the voltage

[jstefanop]

One of my sticks from bitshopper is allways at cca. 10% HW errors. 8.5% was lowest I saw after 60mins and it stays arround 8.5-8.6%. I didn't tune anything but tried another way. Started at lowest clock @384, than @450... all the way up to 700, but allways is the same. VCORE=0.77V, VMEM=0.84V. I use Sipolar A-400 hub, only with this one stick in it for testing. Is it stick problem or should I try to tune it? Just need direction 'cause stock voltages looks ok, at least for clock speeds up to 600MHz...

Few sticks I have come across show this issue. Its rare, but the IO coms sometimes spit out garbage that is picked up as a hardware error, unfortunately no way to filter this out. As long as they hash fine you can ignore it (you just have to figure that 8.5% is 0% error for your stick when tuning).

[jstefanop]

I am having problems with the moonlanders stop hashing. Once 2-3 of them stop they don’t seem to want to restart. I tried different clock speeds and always have 1-3 of them stop. Bfgminer keeps saying it’s trying to restart them with no luck. Any suggestions?

Your hub is not providing enough power. Try lowering voltages/freq.

I am using the eyeboot 49 port self powered hub with 20 miners, maybe I will try removing a few and lowering the voltage

Yea 20 is near the max for that hub especially if you are running them past stock speeds. The most I have ever run stably is about 15 on it (at max speed).

[Fenboy]

One of my sticks from bitshopper is allways at cca. 10% HW errors. 8.5% was lowest I saw after 60mins and it stays arround 8.5-8.6%. I didn't tune anything but tried another way. Started at lowest clock @384, than @450... all the way up to 700, but allways is the same. VCORE=0.77V, VMEM=0.84V. I use Sipolar A-400 hub, only with this one stick in it for testing. Is it stick problem or should I try to tune it? Just need direction 'cause stock voltages looks ok, at least for clock speeds up to 600MHz...

Few sticks I have come across show this issue. Its rare, but the IO coms sometimes spit out garbage that is picked up as a hardware error, unfortunately no way to filter this out. As long as they hash fine you can ignore it (you just have to figure that 8.5% is 0% error for your stick when tuning).

I have found the ‘- - benchmark’ setting to be very good at getting my HW below 1% for any clock speed