PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[hobocoe]

Implemented dual mining (Ethash/Blake2s) for some AMD GPUs (RX580/570/560/480/470/460 and Vega). Use the new -dpool, -dwal, -dpass, -dworker, and -dcoin options to set the Blake2s pool. You can set the secondary coin mining intensity with the -sci option. For more information see the Readme.txt file. Note that the devfee when using dual mining is 0.9% on the ethash coin (there is no devfee on the secondary coin).

==>
Dual mining not working
I try everything but Nada

Chances are its a driver conflict. I just recently went through the last 15 or so driver releases trying to get a vega 56 working, and I also used some drivers on 470's and 480. From driver to driver the dual mining quits working. like for me the newest beta driver doesnt dual mine but the current stable does. mess with different drivers to get the dual mining working

I m using msos with Phoenix client (linux) :
my config :
-eworker RigRayan
-epool etc-eu1.nanopool.org:19999
-ewal 0x**.**
-epsw x
-dcoin blake2s
-dpool xvg.blake2s.com:8888
-dwal **
-dpass c=XVG
-proto (AUTO)
-clgreen 1
-mode 0
-tstop 85
-tt 60
-fanmin 50
-fanmax 100

any help please because with the same config it works on Claymore

ahh ya on my MSOS rigs I'm having the same issue and I think it has to do with the current stable build having an older driver. There was talk on their discord about implementing the newest stable linux driver that was just released, but they are worried about stability. Once enough feedback comes in from the community about its stability I think they were going to update the driver.  and that may fix it. Ive even gone into the files and manually changed the config file to use dual mining and I can get it to initiate but it never hashes anything, much like my tests on windows that dual mining works driver by driver. Give it some time and Im sure it work, but for now they are actively "blocking" the dual mining info from being passed into the config file when you enter it on the web interface.

[1714978935]

1714978935

[1714978935]

1714978935

[1714978935]

1714978935

[1714978935]

1714978935

[sahbibenayed]

@hobocoe thank you

[1033ruben]

One of my rx 570 4gb wont get above 15 mhs using this miner PLEASE HELP!!! Okay so a little background i just built a mining rig that i got some parts for Christmas. I put it together and low and behold my mobo wouldnt boot  so after some trouble shooting i finally said the heck with it and switched mobos to the asus crosshair hero vi. that one booted up just fine,but then was having a heck of a time seeing all of my cards in the bios so after rearranging and tinkering with the mobo, i finally was able to see my 4 rx 570's. so then i booted it up, and another hard time finding the drivers that would work so i went ahead and went with the newest one the 18.6.3 or whatever it is. then i couldnt get the drivers patched (running custom bioses) so i finally was able to patch the driver had to download the latest patcher the 1.4.6. so then finally i could start mining right or at least i thought so. but then i fired up phoenix 3.5d which had been working great for me then i got the opencl cards found or whatever it says.  so then i found the latest phoenix the 4.0b so then that dedicated my cards but am getting sub par results  i was getting 30 mhs on 3 o the 4 cards in prior testing and on the 4th card was getting right around 29to say the least  i have been getting around 119- 123 mhs  on the four cards and now am getting barely over 100 like 102-104 please can anyone have any thing to recommend. to get this back up and running the way it was/suppose to be.
THANKS

[dfish987]

One of my rx 570 4gb wont get above 15 mhs using this miner PLEASE HELP!!! Okay so a little background i just built a mining rig that i got some parts for Christmas. I put it together and low and behold my mobo wouldnt boot  so after some trouble shooting i finally said the heck with it and switched mobos to the asus crosshair hero vi. that one booted up just fine,but then was having a heck of a time seeing all of my cards in the bios so after rearranging and tinkering with the mobo, i finally was able to see my 4 rx 570's. so then i booted it up, and another hard time finding the drivers that would work so i went ahead and went with the newest one the 18.6.3 or whatever it is. then i couldnt get the drivers patched (running custom bioses) so i finally was able to patch the driver had to download the latest patcher the 1.4.6. so then finally i could start mining right or at least i thought so. but then i fired up phoenix 3.5d which had been working great for me then i got the opencl cards found or whatever it says.  so then i found the latest phoenix the 4.0b so then that dedicated my cards but am getting sub par results  i was getting 30 mhs on 3 o the 4 cards in prior testing and on the 4th card was getting right around 29to say the least  i have been getting around 119- 123 mhs  on the four cards and now am getting barely over 100 like 102-104 please can anyone have any thing to recommend. to get this back up and running the way it was/suppose to be.
THANKS

This version has an auto tune -gt for AMD cards if you have your -gt  set for 3.5 d add -gt 0 to your bat file let phoenixminer Auto config your GT value then after it finishes know what it gets for each card and add that to your bat file like I'm running 4 card rig and my -gt values are -gt 50,18,19,24 this will get your hashrate up

[inv1s1bl3]

Looking nice!

Code:

2018.12.30:20:53:16.092: main Eth speed: 161.155 MH/s, shares: 9/0/0, time: 0:06
2018.12.30:20:53:16.092: main GPUs: 1: 32.280 MH/s (5) 2: 32.031 MH/s (0) 3: 32.295 MH/s (3) 4: 32.270 MH/s (0) 5: 32.279 MH/s (1)

Thanks for constantly updating the miner, Phoenix!

[neogeo]

@PhoenixMiner

Please include Energi/NRG crypto to Your miner (ETH algo based crypto)

TNX!

[031croat]

hi guys, im new at Phoenix miner, can someone help me with bat file, what to do to make my miner more stable.i didnt oc to much, i have rx 580 nitro and my oc is cclock 1150 and mclock 2050. and i also get this message, but i see my rig at pool. ''Invalid wallet 'YourWallet.DESKTOP-TJ077KR' specified for pool 1 from epools.txt. Replace with a real wallet' Thanks in advance :-)

[lesjokolat]

hi guys, im new at Phoenix miner, can someone help me with bat file, what to do to make my miner more stable.i didnt oc to much, i have rx 580 nitro and my oc is cclock 1150 and mclock 2050. and i also get this message, but i see my rig at pool. ''Invalid wallet 'YourWallet.DESKTOP-TJ077KR' specified for pool 1 from epools.txt. Replace with a real wallet' Thanks in advance :-)

this message just means you have no default wallet ID in epools.txt. If you have correct wallet/pool login in start up file then that can be ignored. If not then needs to be corrected.

in terms of stability. Let it auto tune first time make note of numbers then. add -gt x,x,x  (depends on how many gpus you have one x for each). That will in most cases give you decent speeds.

GLTU

[FFI2013]

One of my rx 570 4gb wont get above 15 mhs using this miner PLEASE HELP!!! Okay so a little background i just built a mining rig that i got some parts for Christmas. I put it together and low and behold my mobo wouldnt boot  so after some trouble shooting i finally said the heck with it and switched mobos to the asus crosshair hero vi. that one booted up just fine,but then was having a heck of a time seeing all of my cards in the bios so after rearranging and tinkering with the mobo, i finally was able to see my 4 rx 570's. so then i booted it up, and another hard time finding the drivers that would work so i went ahead and went with the newest one the 18.6.3 or whatever it is. then i couldnt get the drivers patched (running custom bioses) so i finally was able to patch the driver had to download the latest patcher the 1.4.6. so then finally i could start mining right or at least i thought so. but then i fired up phoenix 3.5d which had been working great for me then i got the opencl cards found or whatever it says.  so then i found the latest phoenix the 4.0b so then that dedicated my cards but am getting sub par results  i was getting 30 mhs on 3 o the 4 cards in prior testing and on the 4th card was getting right around 29to say the least  i have been getting around 119- 123 mhs  on the four cards and now am getting barely over 100 like 102-104 please can anyone have any thing to recommend. to get this back up and running the way it was/suppose to be.
THANKS

I got sick of windows and their update bullshit even when totally disabling updates the bastards sneak it in somehow plus patch this mess with these drivers it gets really aggravating sometimes so I tried every other mining os smos, pimp, ethos and finally came to hiveos and I love it you can run up to 3 rigs for free and the devs are great they keep everything updated and just about every miner you can think of is there so check it out

[031croat]

hi guys, im new at Phoenix miner, can someone help me with bat file, what to do to make my miner more stable.i didnt oc to much, i have rx 580 nitro and my oc is cclock 1150 and mclock 2050. and i also get this message, but i see my rig at pool. ''Invalid wallet 'YourWallet.DESKTOP-TJ077KR' specified for pool 1 from epools.txt. Replace with a real wallet' Thanks in advance :-)

this message just means you have no default wallet ID in epools.txt. If you have correct wallet/pool login in start up file then that can be ignored. If not then needs to be corrected.

in terms of stability. Let it auto tune first time make note of numbers then. add -gt x,x,x  (depends on how many gpus you have one x for each). That will in most cases give you decent speeds.

Ah thanks, i was bit confused with that wallet error. I double checked and everything was fine, but error was still there.

I have 6 gpu-s on that rig all rx 580 elpida memory. What should i enter for -gt?

[lesjokolat]

hi guys, im new at Phoenix miner, can someone help me with bat file, what to do to make my miner more stable.i didnt oc to much, i have rx 580 nitro and my oc is cclock 1150 and mclock 2050. and i also get this message, but i see my rig at pool. ''Invalid wallet 'YourWallet.DESKTOP-TJ077KR' specified for pool 1 from epools.txt. Replace with a real wallet' Thanks in advance :-)

this message just means you have no default wallet ID in epools.txt. If you have correct wallet/pool login in start up file then that can be ignored. If not then needs to be corrected.

in terms of stability. Let it auto tune first time make note of numbers then. add -gt x,x,x  (depends on how many gpus you have one x for each). That will in most cases give you decent speeds.

Ah thanks, i was bit confused with that wallet error. I double checked and everything was fine, but error was still there.

I have 6 gpu-s on that rig all rx 580 elpida memory. What should i enter for -gt?

There will be 6 different numbers for each GPU. It can take 5 mins or so before it complete autotune process. Wait until you get all of them. Note them and voila add to bat startup

[031croat]

hi guys, im new at Phoenix miner, can someone help me with bat file, what to do to make my miner more stable.i didnt oc to much, i have rx 580 nitro and my oc is cclock 1150 and mclock 2050. and i also get this message, but i see my rig at pool. ''Invalid wallet 'YourWallet.DESKTOP-TJ077KR' specified for pool 1 from epools.txt. Replace with a real wallet' Thanks in advance :-)

this message just means you have no default wallet ID in epools.txt. If you have correct wallet/pool login in start up file then that can be ignored. If not then needs to be corrected.

in terms of stability. Let it auto tune first time make note of numbers then. add -gt x,x,x  (depends on how many gpus you have one x for each). That will in most cases give you decent speeds.

Ah thanks, i was bit confused with that wallet error. I double checked and everything was fine, but error was still there.

I have 6 gpu-s on that rig all rx 580 elpida memory. What should i enter for -gt?

There will be 6 different numbers for each GPU. It can take 5 mins or so before it complete autotune process. Wait until you get all of them. Note them and voila add to bat startup

Thanks for help, going to search for gt in log.

[Tranzius]

Is there any update necessary after the constantiopole hard fork? Will be client updated or working also on new chain?

[zertor]

@PhoenixMiner


Is your miner support Nvidia 20xx Series?
Because they are not listed in the miner's description on the 1st post.

Thanks for the info.

[nordmann666]

noob question

6x Vega 56 (not flashed yet cause using CN algo last)

-gt 6,6,6,6,6,6 -powlim -25,-25,-25,-25,-25,-25 -mclock 950,950,950,950,950,950 -mvddc 801,801,801,801,801,801 -cclock 900,900,900,900,900,900 -cvddc 801,801,801,801,801,801
with this my core runs at 875mV-881mV


-gt 6,6,6,6,6,6 -powlim -25,-25,-25,-25,-25,-25 -mclock 950,950,950,950,950,950 -mvddc 800,800,800,800,800,800 -cclock 900,900,900,900,900,900 -cvddc 800,800,800,800,800,800
cores run with 788mv-800mv = to low and rig crashed

why i cant reach stable mv like 825?!

[N0pr3s3n7]

Is it possible to use ur miner under Linux with 1060 3gb? I got out of memory with -eres 0 claymore somehow updated his miner and it's possible to mine with it over Linux. Thanks

[sefirotius]

Is it possible to use ur miner under Linux with 1060 3gb? I got out of memory with -eres 0 claymore somehow updated his miner and it's possible to mine with it over Linux. Thanks

impossible ethereum and ethereum classic already impossible to mine at 1060 3 GB

[JP_Assassin]

Hi guys,

I have a gtx 1060 6gb mining pretty good on Phoenix

i want to add another pc to the pool which has got a GTX 970 OC 4GB

when i start Phoenix i get this error

CUDA version: 10.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce GTX 970 (pcie 1), CUDA cap. 5.2, 4 GB VRAM, 13 CUs
Nvidia driver version: 416.16
Eth: Loading pools from epools.txt
Eth: the pool list contains 4 pools (2 from command-line)
Eth: primary pool: ssl://eu1.ethermine.org:5555
Starting GPU mining
Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: EthProxy)
Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (172.65.207.106)
Listening for CDM remote manager at port 3333 in read-only mode
GPU1: 57C 64%
Eth: New job #a528de10 from ssl://eu1.ethermine.org:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #233
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Light cache generated in 4.1 s (10.9 MB/s)
GPU1: Allocating DAG (2.84) GB; good for epoch up to #235
CUDA error in CudaProgram.cu:407 : out of memory (2)
GPU1 initMiner error: out of memory
Thread(s) not responding. Restarting.
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00

I have edited the .bat file and added my eth wallet and put .rig002 .. (since my first pc is rig001)

Please assist?

[lesjokolat]

Hi guys,

I have a gtx 1060 6gb mining pretty good on Phoenix

i want to add another pc to the pool which has got a GTX 970 OC 4GB

when i start Phoenix i get this error

CUDA version: 10.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce GTX 970 (pcie 1), CUDA cap. 5.2, 4 GB VRAM, 13 CUs
Nvidia driver version: 416.16
Eth: Loading pools from epools.txt
Eth: the pool list contains 4 pools (2 from command-line)
Eth: primary pool: ssl://eu1.ethermine.org:5555
Starting GPU mining
Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: EthProxy)
Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (172.65.207.106)
Listening for CDM remote manager at port 3333 in read-only mode
GPU1: 57C 64%
Eth: New job #a528de10 from ssl://eu1.ethermine.org:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #233
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Light cache generated in 4.1 s (10.9 MB/s)
GPU1: Allocating DAG (2.84) GB; good for epoch up to #235
CUDA error in CudaProgram.cu:407 : out of memory (2)
GPU1 initMiner error: out of memory
Thread(s) not responding. Restarting.
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00

I have edited the .bat file and added my eth wallet and put .rig002 .. (since my first pc is rig001)

Please assist?

Have you tried increasing the virtual memory to something higher? How much ram does this system have?

Also if they are just nvidia based cards try adding -nvidia to your bat.

Seeing your startup command line would help...

[JP_Assassin]

Have you tried increasing the virtual memory to something higher? How much ram does this system have?

Also if they are just nvidia based cards try adding -nvidia to your bat.

Seeing your startup command line would help...

Thanks for the reply.

RAM is 12.GB, I added -nvidia unfortunately no luck:

REM
REM Example bat file for starting PhoenixMiner.exe to mine ETH
REM

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

REM IMPORTANT: Replace the ETH address with your own ETH wallet address in the -wal option (Rig002 is the name of the rig)
PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal XXXX.Rig002 - nvidia
pause

Thanks so much.