PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[PhoenixMiner]

PhoenixMiner 4.1c is the new stable release. You can find the download link and other information in the first post of this thread. If you have already downloaded and installed it, there is no need to do this again - there is no change from 4.1c that was published as a beta version.

I can`t see if I can use -Kernel option per GPU. Is it impossible at all or it is miner limitation?
I have a rig with one RX580 8Gb and four RX570 4Gb and wanna try turbo kernels. Any suggestions?

  Yes, you can use -clkernel 3 only for some of the GPUs. Even if you set -clkernel 3, if given GPU doesn't have
enough video memory for double DAG, it will switch to -clkernel 1. For example if you want to use the turbo kernels for
the first GPU only from a five GPU rig, use the following command line option: -clkernel 311111

Hi

have there real problems, when mines with R9 390 u. R9 390X GPU's .....
For some months, the hashrate is decreasing continuously from formerly about 33 Mhs / s to about 25.9 Mhs / s even though the R9 390 (X) of the DAG Epoch problem should not be affected at all ...
have any idea to get back 33 Mh/s
Resiste the DAG Epoch

  This is caused by the size of the TLB, which is too small for the current DAG sizes and causes constant eviction from the TLB cache. AMD released the "compute mode" fix for RX4x0 and RX5x0 cards, which simply increased the memory page size. However there is no such fix for 290/390 cards. Probably there is no way to increase the page size on these cards because of hardware limitations but only AMD knows for sure. You can either mine coins with lower DAG (basically everything except ETH and ETC), or accept the hashrate drop (but it will get gradually worse over time).

2019.01.16:19:39:00.717: main Phoenix Miner 4.0b Windows/msvc - Release build
2019.01.16:19:39:00.717: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
2019.01.16:19:39:00.717: main No CUDA driver found
2019.01.16:19:39:06.406: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2019.01.16:19:39:06.406: main OpenCL platform: OpenCL 2.1 AMD-APP (2766.5)
2019.01.16:19:39:06.406: main Available GPUs for mining:

how do i fix this problem?

  You have upgraded your driver to version that is not yet supported by PhoenixMiner (see the line Unknown OpenCL driver version! Hashrate and stale shares may suffer in the log, it will be printed as yellow warning on your screen when the miner starts). It is not a good idea to update to drivers that are newer than the release of PhoenixMiner you are using because this means we weren't able to test this release of PhoenixMiner with these drivers and they probably won't work well (or at all). To fix the problem either upgrade to PhoenixMiner 4.1c, which supports AMD drivers up to and including 19.1.1.

hi

all good with PhoenixMiner until some hours ago i have more than one rig all nvidia and all with these error any idea with ?

Have the same problem since 4 hours. My rig works pver year without problems but today i've seen error with CUDA.

CUDART error in CudaProgram.cu:127 : an illegal memory access was encountered (77)
GPU1 initMiner error: an illegal memory access was encountered
CUDART error in CudaProgram.cu:127 : an illegal memory access was encountered (77)
GPU2 initMiner error: an illegal memory access was encountered

or

CUDART error in CudaProgram.cu:127 : an illegal memory access was encountered (77)
CUDA error in CudaProgram.cu:102 : an illegal memory access was encountered (700)
GPU2 initMiner error: an illegal memory access was encountered
GPU1 initMiner error: an illegal memory access was encountered


Anyone know what to do with this? Virtual memory is fine.

I started getting crash on dag creation on one rig some time in the middle of the night running Phoenix Miner 2.8... Now today all my rigs running 2.8 crash... Would think it's something that Windows pushed, even tho I have Windows Update disabled... Hopefully someone can figure it out...

  (also to all miners experiencing problems with PhoenixMiner 3.5 and below versions when trying to create the DAG):

   The versions of PhoenixMiner before 4.0 only support DAG epoch up to 235. ETC passed epoch 235 a few weeks ago, and recently ETH also passed DAG epoch 235 and is now on 236. The unfortunate result is that the old version(s) of PhoenixMiner won't be able to create DAG or mine ETH or ETC any more - you must upgrade to PhoenixMiner 4.x.
   We have printed this warning here during the release of PhoenixMiner 4.0 but admittedly we could have done much better job with making it visible. We will pin this message in the first post too.

After trying I also found 4.0b version does work now although it wasn’t working well before additionally it runs my rtx2070s hash a bit slower than versions 3.5 did

   We are working on RTX20x0 optimizations but they won't be ready until the next release.

[speedycat]

I downloaded new 4.0 (currently running 3.5) and when I start it mining doesn't start, odd part its showing me I have 6 GPUs vs 3!
Here is text file from 4.0 when I run it (I did remove my walletadd & my rig name):
Thanks for help
---------
2019.01.18:07:36:20.719: main Phoenix Miner 4.0b Windows/msvc - Release build
2019.01.18:07:36:20.719: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal mywallet.myrig -amd
2019.01.18:07:36:23.503: main OpenCL driver version: 18.10/11
2019.01.18:07:36:23.503: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2019.01.18:07:36:23.503: main OpenCL platform: OpenCL 2.1 AMD-APP (2766.5)
2019.01.18:07:36:23.503: main Available GPUs for mining:
2019.01.18:07:36:23.503: main GPU1: Radeon (TM) RX 480 Graphics (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:07:36:23.503: main GPU2: Radeon (TM) RX 480 Graphics (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:07:36:23.503: main GPU3: Radeon (TM) RX 480 Graphics (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:07:36:23.503: main GPU4: Radeon (TM) RX 480 Graphics (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:07:36:23.503: main GPU5: Radeon (TM) RX 480 Graphics (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:07:36:23.503: main GPU6: Radeon (TM) RX 480 Graphics (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:07:36:23.533: main ADL library initialized
2019.01.18:07:36:26.243: main Eth: the pool list contains 2 pools (2 from command-line)
2019.01.18:07:36:26.243: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2019.01.18:07:36:26.243: main Starting GPU mining
2019.01.18:07:36:26.243: main Matched GPU1 to ADL adapter index 16 (method 1)
2019.01.18:07:36:26.270: main GPU1: Created ADL monitor for adapter 16; overdrive version: 7
2019.01.18:07:36:26.271: main GPU1: using AMD driver ver 18.12.2
2019.01.18:07:36:26.271: main Matched GPU2 to ADL adapter index 16 (method 1)
2019.01.18:07:36:26.294: main GPU2: Created ADL monitor for adapter 16; overdrive version: 7
2019.01.18:07:36:26.294: main GPU2: using AMD driver ver 18.12.2
2019.01.18:07:36:26.294: main Matched GPU3 to ADL adapter index 8 (method 1)
2019.01.18:07:36:26.321: main GPU3: Created ADL monitor for adapter 8; overdrive version: 7
2019.01.18:07:36:26.322: main GPU3: using AMD driver ver 18.12.2
2019.01.18:07:36:26.322: main Matched GPU4 to ADL adapter index 8 (method 1)
2019.01.18:07:36:26.347: main GPU4: Created ADL monitor for adapter 8; overdrive version: 7
2019.01.18:07:36:26.347: main GPU4: using AMD driver ver 18.12.2
2019.01.18:07:36:26.347: main Matched GPU5 to ADL adapter index 0 (method 1)
2019.01.18:07:36:26.375: main GPU5: Created ADL monitor for adapter 0; overdrive version: 7
2019.01.18:07:36:26.375: main GPU5: using AMD driver ver 18.12.2
2019.01.18:07:36:26.375: main Matched GPU6 to ADL adapter index 0 (method 1)
2019.01.18:07:36:26.401: main GPU6: Created ADL monitor for adapter 0; overdrive version: 7
2019.01.18:07:36:26.401: main GPU6: using AMD driver ver 18.12.2
2019.01.18:07:36:26.402: wdog Starting watchdog thread
2019.01.18:07:36:27.143: main Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: EthProxy)
2019.01.18:07:36:27.182: eths Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (172.65.207.106)
2019.01.18:07:36:27.259: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["mywallet.myrig"]}

2019.01.18:07:36:27.349: main Listening for CDM remote manager at port 3333 in read-only mode
2019.01.18:07:36:27.352: main GPU1: 15C 40%, GPU2: 15C 40%, GPU3: 15C 40%, GPU4: 15C 40%, GPU5: 12C 40%, GPU6: 12C 40%
2019.01.18:07:36:27.463: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2019.01.18:07:36:27.463: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:07:36:27.598: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x187fa1a322de0a7bd1bf27361b0a9bf044d388a2228091cb780044945087eba0","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c250d"]}
2019.01.18:07:36:27.598: eths Eth: New job #187fa1a3 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.01.18:07:36:27.598: GPU1 GPU1: Starting up... (0)
2019.01.18:07:36:27.599: GPU1 GPU1: Generating ethash light cache for epoch #236
2019.01.18:07:36:27.600: GPU2 GPU2: Starting up... (0)
2019.01.18:07:36:27.604: GPU3 GPU3: Starting up... (0)
2019.01.18:07:36:27.608: GPU4 GPU4: Starting up... (0)
2019.01.18:07:36:27.612: GPU5 GPU5: Starting up... (0)
2019.01.18:07:36:27.616: GPU6 GPU6: Starting up... (0)
2019.01.18:07:36:30.007: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xcb58e2bae70baa3b24cdfe3ad3238ff9d1ad63e9045693b3bd06368848e7f94c","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c250e"]}
2019.01.18:07:36:30.007: eths Eth: New job #cb58e2ba from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.01.18:07:36:31.249: GPU1 Light cache generated in 3.6 s (12.5 MB/s)
2019.01.18:07:36:31.732: GPU1 GPU1: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:07:36:31.740: GPU1 GPU1: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:07:36:32.003: GPU1 GPU1: Generating DAG for epoch #236

Then it stops!
-------------------------------------
Below is what is generated when I run 3.5

2019.01.18:07:51:06.508: main Phoenix Miner 3.5d Windows/msvc - Release build
2019.01.18:07:51:06.508: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal mywallet.myrig -amd
2019.01.18:07:51:08.304: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2019.01.18:07:51:08.304: main OpenCL platform: OpenCL 2.1 AMD-APP (2766.5)
2019.01.18:07:51:08.304: main Available GPUs for mining:
2019.01.18:07:51:08.304: main GPU1: Radeon (TM) RX 480 Graphics (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:07:51:08.304: main GPU2: Radeon (TM) RX 480 Graphics (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:07:51:08.304: main GPU3: Radeon (TM) RX 480 Graphics (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:07:51:08.331: main ADL library initialized
2019.01.18:07:51:09.700: main Eth: the pool list contains 2 pools
2019.01.18:07:51:09.700: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2019.01.18:07:51:09.700: main Starting GPU mining
2019.01.18:07:51:09.700: main Matched GPU1 to ADL adapter index 16 (method 1)
2019.01.18:07:51:09.729: main GPU1: Created ADL monitor for adapter 16; overdrive version: 7
2019.01.18:07:51:09.729: main GPU1: using AMD driver ver 18.12.2
2019.01.18:07:51:09.729: main Matched GPU2 to ADL adapter index 8 (method 1)
2019.01.18:07:51:09.760: main GPU2: Created ADL monitor for adapter 8; overdrive version: 7
2019.01.18:07:51:09.760: main GPU2: using AMD driver ver 18.12.2
2019.01.18:07:51:09.760: main Matched GPU3 to ADL adapter index 0 (method 1)
2019.01.18:07:51:09.785: main GPU3: Created ADL monitor for adapter 0; overdrive version: 7
2019.01.18:07:51:09.785: main GPU3: using AMD driver ver 18.12.2
2019.01.18:07:51:09.786: wdog Starting watchdog thread
2019.01.18:07:51:10.277: main Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: EthProxy)
2019.01.18:07:51:10.387: eths Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (172.65.207.106)
2019.01.18:07:51:10.482: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["mywallet.myrig"]}

2019.01.18:07:51:10.482: main Listening for CDM remote manager at port 3333 in read-only mode
2019.01.18:07:51:10.483: main GPU1: 18C 40%, GPU2: 14C 40%, GPU3: 12C 40%
2019.01.18:07:51:10.684: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2019.01.18:07:51:10.684: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:07:51:10.816: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0xd7cf0b04c570091b9d2eb2521c12dae1d6c8e4007bf117fef6078895406b81e4","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2543"]}
2019.01.18:07:51:10.816: eths Eth: New job #d7cf0b04 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.01.18:07:51:10.817: GPU1 GPU1: Starting up... (0)
2019.01.18:07:51:10.817: GPU2 GPU2: Starting up... (0)
2019.01.18:07:51:10.817: GPU1 Eth: Generating light cache for epoch #236
2019.01.18:07:51:10.819: GPU3 GPU3: Starting up... (0)
2019.01.18:07:51:14.979: GPU1 GPU1: Using new optimized OpenCL kernels (device name 'Ellesmere')
2019.01.18:07:51:14.979: GPU1 GPU1: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:07:51:14.988: GPU1 GPU1: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:07:51:15.141: GPU1 GPU1: Generating DAG for epoch #236
2019.01.18:07:51:15.316: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2019.01.18:07:51:15.316: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0)
2019.01.18:07:51:15.489: GPU2 GPU2: Using new optimized OpenCL kernels (device name 'Ellesmere')
2019.01.18:07:51:15.489: GPU2 GPU2: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:07:51:15.498: GPU2 GPU2: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:07:51:15.774: GPU2 GPU2: Generating DAG for epoch #236
2019.01.18:07:51:15.996: GPU3 GPU3: Using new optimized OpenCL kernels (device name 'Ellesmere')
2019.01.18:07:51:15.996: GPU3 GPU3: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:07:51:16.002: GPU3 GPU3: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:07:51:16.278: GPU3 GPU3: Generating DAG for epoch #236
2019.01.18:07:51:16.715: GPU1 GPU1: DAG  19%
2019.01.18:07:51:17.300: GPU2 GPU2: DAG  19%
2019.01.18:07:51:17.815: GPU3 GPU3: DAG  19%
2019.01.18:07:51:18.544: GPU1 GPU1: DAG  44%
2019.01.18:07:51:19.114: GPU2 GPU2: DAG  44%
2019.01.18:07:51:19.629: GPU3 GPU3: DAG  44%
2019.01.18:07:51:20.360: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2019.01.18:07:51:20.360: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0)
2019.01.18:07:51:20.373: GPU1 GPU1: DAG  69%
2019.01.18:07:51:20.483: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:07:51:20.615: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0xd7cf0b04c570091b9d2eb2521c12dae1d6c8e4007bf117fef6078895406b81e4","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2543"]}
2019.01.18:07:51:20.930: GPU2 GPU2: DAG  69%
2019.01.18:07:51:21.443: GPU3 GPU3: DAG  69%
2019.01.18:07:51:22.225: GPU1 GPU1: DAG  94%
2019.01.18:07:51:22.682: GPU1 GPU1: DAG generated in 7.5 s (386.2 MB/s)
2019.01.18:07:51:22.683: GPU1 GPU1: no gt value specified, switching to auto-tune
2019.01.18:07:51:22.683: GPU1 GPU1: starting auto-tune process
2019.01.18:07:51:22.745: GPU2 GPU2: DAG  94%
2019.01.18:07:51:23.199: GPU2 GPU2: DAG generated in 7.4 s (392.2 MB/s)
2019.01.18:07:51:23.200: GPU2 GPU2: no gt value specified, switching to auto-tune
2019.01.18:07:51:23.200: GPU2 GPU2: starting auto-tune process
2019.01.18:07:51:23.257: GPU3 GPU3: DAG  94%
2019.01.18:07:51:23.711: GPU3 GPU3: DAG generated in 7.4 s (391.8 MB/s)
2019.01.18:07:51:23.712: GPU3 GPU3: no gt value specified, switching to auto-tune
2019.01.18:07:51:23.712: GPU3 GPU3: starting auto-tune process
2019.01.18:07:51:24.230: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x792b30eb088e3c1617337ab55f543624454073d69f354663ec849ee22c02701c","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2544"]}
2019.01.18:07:51:24.230: eths Eth: New job #792b30eb from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.01.18:07:51:25.411: main Eth speed: 63.447 MH/s, shares: 0/0/0, time: 0:00
2019.01.18:07:51:25.411: main GPUs: 1: 19.418 MH/s (0) 2: 22.324 MH/s (0) 3: 21.705 MH/s (0)
2019.01.18:07:51:30.464: main Eth speed: 68.360 MH/s, shares: 0/0/0, time: 0:00
2019.01.18:07:51:30.464: main GPUs: 1: 21.497 MH/s (0) 2: 23.595 MH/s (0) 3: 23.269 MH/s (0)
2019.01.18:07:51:30.487: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:07:51:30.487: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x414ccde","0x04b82d4ef2128ea9a109d3b8642a37ea5c591d2d0f4bc41d7825b7f89f849da1"]}

2019.01.18:07:51:30.620: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x792b30eb088e3c1617337ab55f543624454073d69f354663ec849ee22c02701c","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2544"]}
2019.01.18:07:51:35.548: main Eth speed: 63.139 MH/s, shares: 0/0/0, time: 0:00
2019.01.18:07:51:35.548: main GPUs: 1: 19.464 MH/s (0) 2: 22.080 MH/s (0) 3: 21.595 MH/s (0)
2019.01.18:07:51:38.374: main GPU1: 32C 41%, GPU2: 33C 40%, GPU3: 33C 41%
2019.01.18:07:51:40.304: GPU1 Eth: GPU1: ETH share found!
2019.01.18:07:51:40.304: eths Eth: Send: {"id":4,"jsonrpc":"2.0","method":"eth_submitWork","params":["0x9fe68d464f21dfef","0x792b30eb088e3c1617337ab55f543624454073d69f354663ec849ee22c02701c","0x1f359a98f05ecbb1ecf5ba09393f04835695b58b80138bb73c34a5f25b42c297"]}

2019.01.18:07:51:40.305: eths Eth: Share actual difficulty: 58.2 GH (!)
2019.01.18:07:51:40.437: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2019.01.18:07:51:40.437: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":true}
2019.01.18:07:51:40.437: eths Eth: Share accepted in 133 ms
2019.01.18:07:51:40.487: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:07:51:40.595: main Eth speed: 62.678 MH/s, shares: 1/0/0, time: 0:00
2019.01.18:07:51:40.595: main GPUs: 1: 19.537 MH/s (1) 2: 21.928 MH/s (0) 3: 21.213 MH/s (0)
2019.01.18:07:51:40.620: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x792b30eb088e3c1617337ab55f543624454073d69f354663ec849ee22c02701c","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2544"]}
2019.01.18:07:51:45.641: main Eth speed: 64.002 MH/s, shares: 1/0/0, time: 0:00
2019.01.18:07:51:45.641: main GPUs: 1: 20.492 MH/s (1) 2: 21.972 MH/s (0) 3: 21.538 MH/s (0)
2019.01.18:07:51:50.489: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:07:51:50.490: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x3dfb514","0x04b82d4ef2128ea9a109d3b8642a37ea5c591d2d0f4bc41d7825b7f89f849da1"]}

2019.01.18:07:51:50.623: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x792b30eb088e3c1617337ab55f543624454073d69f354663ec849ee22c02701c","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2544"]}
2019.01.18:07:51:50.686: main Eth speed: 70.328 MH/s, shares: 1/0/0, time: 0:00
2019.01.18:07:51:50.686: main GPUs: 1: 22.506 MH/s (1) 2: 24.008 MH/s (0) 3: 23.813 MH/s (0)
2019.01.18:07:51:55.319: main 
2019.01.18:07:51:55.319: main *** 0:00 *** 1/18 07:51 **************************************
2019.01.18:07:51:55.319: main Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 0:00
2019.01.18:07:51:55.319: main 3 GPU(s) are auto-tuning. Hashrate may be low until they are ready.
2019.01.18:07:51:55.319: main Eth: Accepted shares 1 (0 stales), rejected shares 0 (0 stales)
2019.01.18:07:51:55.319: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2019.01.18:07:51:55.319: main Eth: Maximum difficulty of found share: 58.2 GH (!)
2019.01.18:07:51:55.319: main Eth: Average speed (5 min): 66.318 MH/s
2019.01.18:07:51:55.319: main 
2019.01.18:07:51:55.723: main Eth speed: 71.636 MH/s, shares: 1/0/0, time: 0:00
2019.01.18:07:51:55.723: main GPUs: 1: 22.633 MH/s (1) 2: 24.501 MH/s (0) 3: 24.502 MH/s (0)
2019.01.18:07:52:00.491: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:07:52:00.626: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2019.01.18:07:52:00.626: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x792b30eb088e3c1617337ab55f543624454073d69f354663ec849ee22c02701c","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2544"]}
2019.01.18:07:52:00.765: main Eth speed: 72.231 MH/s, shares: 1/0/0, time: 0:00
2019.01.18:07:52:00.766: main GPUs: 1: 23.206 MH/s (1) 2: 24.552 MH/s (0) 3: 24.473 MH/s (0)
2019.01.18:07:52:03.982: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xae519e7e4f0ba517df2a4889d90109529b094d4fb89012e15940fa32eb33ae7f","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2545"]}
2019.01.18:07:52:03.982: eths Eth: New job #ae519e7e from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.01.18:07:52:05.817: main Eth speed: 72.418 MH/s, shares: 1/0/0, time: 0:00
2019.01.18:07:52:05.817: main GPUs: 1: 23.552 MH/s (1) 2: 24.473 MH/s (0) 3: 24.393 MH/s (0)
2019.01.18:07:52:06.421: main GPU1: 39C 48%, GPU2: 39C 49%, GPU3: 42C 51%
2019.01.18:07:52:10.491: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:07:52:10.491: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x41562fd","0x04b82d4ef2128ea9a109d3b8642a37ea5c591d2d0f4bc41d7825b7f89f849da1"]}

2019.01.18:07:52:10.626: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0xae519e7e4f0ba517df2a4889d90109529b094d4fb89012e15940fa32eb33ae7f","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2545"]}
2019.01.18:07:52:10.849: main Eth speed: 72.486 MH/s, shares: 1/0/0, time: 0:01
2019.01.18:07:52:10.849: main GPUs: 1: 23.451 MH/s (1) 2: 24.567 MH/s (0) 3: 24.467 MH/s (0)
2019.01.18:07:52:10.999: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x51a8eb8b3df338e4a3c28b1b6a8f166ccbde5d1527a0bc55411185b1cbb9cdd5","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2546"]}
2019.01.18:07:52:10.999: eths Eth: New job #51a8eb8b from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.01.18:07:52:15.899: main Eth speed: 72.569 MH/s, shares: 1/0/0, time: 0:01
2019.01.18:07:52:15.899: main GPUs: 1: 23.481 MH/s (1) 2: 24.562 MH/s (0) 3: 24.526 MH/s (0)
2019.01.18:07:52:20.493: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:07:52:20.626: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2019.01.18:07:52:20.626: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x51a8eb8b3df338e4a3c28b1b6a8f166ccbde5d1527a0bc55411185b1cbb9cdd5","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2546"]}
2019.01.18:07:52:20.960: main Eth speed: 72.803 MH/s, shares: 1/0/0, time: 0:01
2019.01.18:07:52:20.960: main GPUs: 1: 23.402 MH/s (1) 2: 24.759 MH/s (0) 3: 24.642 MH/s (0)
2019.01.18:07:52:23.300: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xd8ba5caa29750e6888d276af10aebbcacccbf45855e3bd7e2ad3441785927bab","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2547"]}
2019.01.18:07:52:23.300: eths Eth: New job #d8ba5caa from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.01.18:07:52:26.013: main Eth speed: 72.839 MH/s, shares: 1/0/0, time: 0:01
2019.01.18:07:52:26.013: main GPUs: 1: 23.389 MH/s (1) 2: 24.731 MH/s (0) 3: 24.720 MH/s (0)

[pp55]

I can`t see if I can use -Kernel option per GPU. Is it impossible at all or it is miner limitation?
I have a rig with one RX580 8Gb and four RX570 4Gb and wanna try turbo kernels. Any suggestions?

  Yes, you can use -clkernel 3 only for some of the GPUs. Even if you set -clkernel 3, if given GPU doesn't have
enough video memory for double DAG, it will switch to -clkernel 1. For example if you want to use the turbo kernels for
the first GPU only from a five GPU rig, use the following command line option: -clkernel 311111

Thanks for answer! It would be nice to add this info in readme.
For me this option works good as -clkernel 22223.
+0.12 MH/s for RX580 8Gb

[sxemini]

I also have more than 10 pieces R9 390 8g and have a problem with hashrate mining ETH

Dudes read, it is a normal very old problem. Why so many people ask this question this days?  
R9 290 and R9 390 have DAG issue. There is no fix for this, only mining Coins with lower DAG (CLO, ETHO)

I also have more than 10 pieces R9 390 8g and have a problem with hashrate mining ETH

claymore fix this problem with RX 580/570/480/470, but they said they have no support R9 390 8g for the moment

claymore fix this problem? XD no this problem where not fixed by claymore. It was a driver bug, and amd fixed this problem.

You think the RX 480/470 is not an old GPU too? Claymore has fix this DAG file problem

Phönixminer has all said. It is your time that you lose by searching a solution. I wait for your solution XD

[skinnyfalcon]

After trying I also found 4.0b version does work now although it wasn’t working well before additionally it runs my rtx2070s hash a bit slower than versions 3.5 did

I am experiencing the same problem after updating to 4.1. with the older version I was getting 372MH, nothing changed and now i am down to 280MH. Thats a 30% drop in hash, anyone else seen this and found why (or solution)?

[Guigs321]

After trying I also found 4.0b version does work now although it wasn’t working well before additionally it runs my rtx2070s hash a bit slower than versions 3.5 did

I am experiencing the same problem after updating to 4.1. with the older version I was getting 372MH, nothing changed and now i am down to 280MH. Thats a 30% drop in hash, anyone else seen this and found why (or solution)?

Did you try Auto-tune ? remove -GT XX

[gangcho]

PhoenixMiner How long now will this miner version work? till what dag?

[hustleman]

Need help with the -clkernel 3 set up.  I have a 12 gpu AMD rig consisting of 2,4gb 560, 3 4gb 580, 3 8gb 570 and 4 8gb 580.  when attempting to set up turbo clkernels im getting the following error message.  I placed the following in the command line: "-clkernel 332223333232"   Any help would be appreciated.

2019.01.18:06:58:02.616: main Phoenix Miner 4.1c Windows/msvc - Release build
2019.01.18:06:58:02.616: main Cmd line: -pool ssl://us1.ethermine.org:5555 -pool2 us1.ethermine.org:4444 -wal 0xf9f81Af91d261d9934900072182FCa3fef906424.Android1 -proto 3 -clkernel 332223333232
2019.01.18:06:58:02.616: main No CUDA driver found
2019.01.18:06:58:06.814: main OpenCL driver version: 18.8/9
2019.01.18:06:58:06.814: main Available GPUs for mining:
2019.01.18:06:58:06.814: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
2019.01.18:06:58:06.814: main GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU4: Radeon RX 560 Series (pcie 4), OpenCL 2.0, 4 GB VRAM, 14 CUs
2019.01.18:06:58:06.814: main GPU5: Radeon RX 560 Series (pcie 5), OpenCL 2.0, 4 GB VRAM, 14 CUs
2019.01.18:06:58:06.814: main GPU6: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU7: Radeon RX 580 Series (pcie , OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU8: Radeon RX 570 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 32 CUs
2019.01.18:06:58:06.814: main GPU9: Radeon RX 570 Series (pcie 10), OpenCL 2.0, 8 GB VRAM, 32 CUs
2019.01.18:06:58:06.814: main GPU10: Radeon RX 580 Series (pcie 11), OpenCL 2.0, 4 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU11: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU12: Radeon RX 580 Series (pcie 13), OpenCL 2.0, 4 GB VRAM, 36 CUs
2019.01.18:06:58:06.895: main ADL library initialized
2019.01.18:06:58:07.982: main Eth: Loading pools from epools.txt
2019.01.18:06:58:07.982: main Eth: Invalid wallet 'YourWallet.DESKTOP-KC9828A' specified for pool 1 from epools.txt. Replace with a real wallet
2019.01.18:06:58:07.982: main Eth: Invalid wallet 'YourWallet.DESKTOP-KC9828A' specified for pool 2 from epools.txt. Replace with a real wallet
2019.01.18:06:58:07.982: main Eth: the pool list contains 2 pools (2 from command-line)
2019.01.18:06:58:07.982: main Eth: primary pool: ssl://us1.ethermine.org:5555
2019.01.18:06:58:07.982: main Starting GPU mining
2019.01.18:06:58:07.982: main Matched GPU1 to ADL adapter index 28 (method 1)
2019.01.18:06:58:08.068: main GPU1: Created ADL monitor for adapter 28; overdrive version: 7
2019.01.18:06:58:08.068: main GPU1: using AMD driver ver 18.9.3
2019.01.18:06:58:08.068: main Matched GPU2 to ADL adapter index 56 (method 1)
2019.01.18:06:58:08.149: main GPU2: Created ADL monitor for adapter 56; overdrive version: 7
2019.01.18:06:58:08.149: main GPU2: using AMD driver ver 18.9.3
2019.01.18:06:58:08.149: main Matched GPU3 to ADL adapter index 42 (method 1)
2019.01.18:06:58:08.230: main GPU3: Created ADL monitor for adapter 42; overdrive version: 7
2019.01.18:06:58:08.230: main GPU3: using AMD driver ver 18.9.3
2019.01.18:06:58:08.230: main Matched GPU4 to ADL adapter index 76 (method 1)
2019.01.18:06:58:08.310: main GPU4: Created ADL monitor for adapter 76; overdrive version: 7
2019.01.18:06:58:08.311: main GPU4: using AMD driver ver 18.9.3
2019.01.18:06:58:08.311: main Matched GPU5 to ADL adapter index 70 (method 1)
2019.01.18:06:58:08.391: main GPU5: Created ADL monitor for adapter 70; overdrive version: 7
2019.01.18:06:58:08.391: main GPU5: using AMD driver ver 18.9.3
2019.01.18:06:58:08.391: main Matched GPU6 to ADL adapter index 14 (method 1)
2019.01.18:06:58:08.471: main GPU6: Created ADL monitor for adapter 14; overdrive version: 7
2019.01.18:06:58:08.471: main GPU6: using AMD driver ver 18.9.3
2019.01.18:06:58:08.471: main Matched GPU7 to ADL adapter index 21 (method 1)
2019.01.18:06:58:08.552: main GPU7: Created ADL monitor for adapter 21; overdrive version: 7
2019.01.18:06:58:08.552: main GPU7: using AMD driver ver 18.9.3
2019.01.18:06:58:08.552: main Matched GPU8 to ADL adapter index 63 (method 1)
2019.01.18:06:58:08.633: main GPU8: Created ADL monitor for adapter 63; overdrive version: 7
2019.01.18:06:58:08.633: main GPU8: using AMD driver ver 18.9.3
2019.01.18:06:58:08.633: main Matched GPU9 to ADL adapter index 49 (method 1)
2019.01.18:06:58:08.713: main GPU9: Created ADL monitor for adapter 49; overdrive version: 7
2019.01.18:06:58:08.713: main GPU9: using AMD driver ver 18.9.3
2019.01.18:06:58:08.713: main Matched GPU10 to ADL adapter index 7 (method 1)
2019.01.18:06:58:08.794: main GPU10: Created ADL monitor for adapter 7; overdrive version: 7
2019.01.18:06:58:08.794: main GPU10: using AMD driver ver 18.9.3
2019.01.18:06:58:08.794: main Matched GPU11 to ADL adapter index 0 (method 1)
2019.01.18:06:58:08.904: main GPU11: Created ADL monitor for adapter 0; overdrive version: 7
2019.01.18:06:58:08.904: main GPU11: using AMD driver ver 18.9.3
2019.01.18:06:58:08.904: main Matched GPU12 to ADL adapter index 35 (method 1)
2019.01.18:06:58:08.984: main GPU12: Created ADL monitor for adapter 35; overdrive version: 7
2019.01.18:06:58:08.984: main GPU12: using AMD driver ver 18.9.3
2019.01.18:06:58:08.985: wdog Starting watchdog thread
2019.01.18:06:58:09.428: main Eth: Connecting to ethash pool ssl://us1.ethermine.org:5555 (proto: QtMiner)
2019.01.18:06:58:09.479: eths Eth: Connected to SSL ethash pool us1.ethermine.org:5555 (2606:4700:90:0:b886:9f1:5c3e:5711)
2019.01.18:06:58:09.525: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_login","params":["0xf9f81Af91d261d9934900072182FCa3fef906424.Android1"]}

2019.01.18:06:58:09.590: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2019.01.18:06:58:09.590: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:06:58:09.631: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0xdd6e4a289bd083155877621e71a86f8d7d9cb71b1bcfb563073bfe34be41d189","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2645"]}
2019.01.18:06:58:09.632: eths Eth: New job #dd6e4a28 from ssl://us1.ethermine.org:5555; diff: 4000MH
2019.01.18:06:58:09.632: main Listening for CDM remote manager at port 3333 in read-only mode
2019.01.18:06:58:09.632: main GPU1: 41C 0%, GPU2: 52C 0%, GPU3: 50C 34%, GPU4: 57C 33%, GPU5: 56C 36%, GPU6: 45C 0%, GPU7: 47C 0%, GPU8: 52C 0%, GPU9: 53C 26%, GPU10: 53C 40%, GPU11: 44C 0%, GPU12: 47C 53%
2019.01.18:06:58:09.633: GPU1 GPU1: Starting up... (0)
2019.01.18:06:58:09.633: GPU1 GPU1: Generating ethash light cache for epoch #236
2019.01.18:06:58:09.646: GPU2 GPU2: Starting up... (0)
2019.01.18:06:58:09.662: GPU3 GPU3: Starting up... (0)
2019.01.18:06:58:09.677: GPU4 GPU4: Starting up... (0)
2019.01.18:06:58:09.693: GPU5 GPU5: Starting up... (0)
2019.01.18:06:58:09.709: GPU6 GPU6: Starting up... (0)
2019.01.18:06:58:09.724: GPU7 GPU7: Starting up... (0)
2019.01.18:06:58:09.741: GPU8 GPU8: Starting up... (0)
2019.01.18:06:58:09.756: GPU9 GPU9: Starting up... (0)
2019.01.18:06:58:09.771: GPU10 GPU10: Starting up... (0)
2019.01.18:06:58:09.787: GPU11 GPU11: Starting up... (0)
2019.01.18:06:58:09.803: GPU12 GPU12: Starting up... (0)
2019.01.18:06:58:12.396: GPU1 Light cache generated in 2.8 s (16.5 MB/s)
2019.01.18:06:58:12.771: GPU1 GPU1: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:12.781: GPU1 GPU1: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:12.895: GPU1 GPU1: Generating DAG for epoch #236
2019.01.18:06:58:13.162: GPU2 GPU2: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:13.173: GPU2 GPU2: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:13.288: GPU2 GPU2: Generating DAG for epoch #236
2019.01.18:06:58:13.548: GPU3 GPU3: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:13.555: GPU3 GPU3: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:13.670: GPU3 GPU3: Generating DAG for epoch #236
2019.01.18:06:58:13.932: GPU4 GPU4: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:13.939: GPU4 GPU4: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:14.069: GPU4 GPU4: Generating DAG for epoch #236
2019.01.18:06:58:14.315: GPU5 GPU5: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:14.323: GPU5 GPU5: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:14.438: GPU5 GPU5: Generating DAG for epoch #236
2019.01.18:06:58:14.553: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2019.01.18:06:58:14.553: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) 8: 0.000 MH/s (0) 9: 0.000 MH/s (0) 10: 0.000 MH/s (0) 11: 0.000 MH/s (0) 12: 0.000 MH/s (0)
2019.01.18:06:58:14.711: GPU6 GPU6: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:14.720: GPU6 GPU6: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:14.818: GPU1 GPU1: DAG  25%
2019.01.18:06:58:14.835: GPU6 GPU6: Generating DAG for epoch #236
2019.01.18:06:58:15.031: GPU2 GPU2: DAG  25%
2019.01.18:06:58:15.100: GPU7 GPU7: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:15.108: GPU7 GPU7: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:15.245: GPU7 GPU7: Generating DAG for epoch #236
2019.01.18:06:58:15.317: GPU3 GPU3: DAG  31%
2019.01.18:06:58:15.532: GPU8 GPU8: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:15.614: GPU4 GPU4: DAG  13%
2019.01.18:06:58:15.772: GPU8 GPU8: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:15.891: GPU8 GPU8: Generating DAG for epoch #236
2019.01.18:06:58:15.989: GPU5 GPU5: DAG  13%
2019.01.18:06:58:16.212: GPU9 GPU9: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:16.608: GPU9 GPU9: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:16.614: GPU1 GPU1: DAG  50%
2019.01.18:06:58:16.630: GPU2 GPU2: DAG  50%
2019.01.18:06:58:16.761: GPU6 GPU6: DAG  25%
2019.01.18:06:58:16.847: GPU3 GPU3: DAG  63%
2019.01.18:06:58:16.947: GPU10 GPU10: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:16.973: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xe5817595108cc13484bc8fc1eccaf56bf63c6d7bc9aa969734b5cb5ca39faabc","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2646"]}
2019.01.18:06:58:16.973: eths Eth: New job #e5817595 from ssl://us1.ethermine.org:5555; diff: 4000MH
2019.01.18:06:58:16.975: GPU9 GPU9: Starting up... (0)
2019.01.18:06:58:17.006: wdog Thread(s) not responding. Restarting.
2019.01.18:06:58:17.053: GPU10 GPU10: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:17.139: GPU4 GPU4: DAG  25%
2019.01.18:06:58:17.171: GPU7 GPU7: DAG  25%
2019.01.18:06:58:17.368: GPU11 GPU11: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:17.458: GPU11 GPU11: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:17.634: GPU8 GPU8: DAG  25%
2019.01.18:06:58:17.785: GPU12 GPU12: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:17.884: GPU12 GPU12: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:17.928: GPU9 GPU9: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:18.014: GPU9 GPU9: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:18.102: GPU5 GPU5: DAG  31%
2019.01.18:06:58:18.229: GPU2 GPU2: DAG  75%
2019.01.18:06:58:18.352: GPU3 GPU3: DAG  94%
2019.01.18:06:58:18.403: GPU1 GPU1: DAG  75%
2019.01.18:06:58:18.559: GPU6 GPU6: DAG  50%
2019.01.18:06:58:18.653: GPU3 GPU3: DAG generated in 5.0 s (584.5 MB/s)
2019.01.18:06:58:18.654: GPU3 GPU3: Using Ethash OCL kernels (Ellesmere; -clkernel 2)
2019.01.18:06:58:18.654: GPU3 GPU3: no -gt value specified, switching to auto-tune
2019.01.18:06:58:18.654: GPU3 GPU3: starting auto-tune process
2019.01.18:06:58:18.960: GPU7 GPU7: DAG  50%
2019.01.18:06:58:19.233: GPU8 GPU8: DAG  50%
2019.01.18:06:58:19.247: GPU4 GPU4: DAG  44%
2019.01.18:06:58:19.538: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

[bategojko74]

Need help with the -clkernel 3 set up.  I have a 12 gpu AMD rig consisting of 2,4gb 560, 3 4gb 580, 3 8gb 570 and 4 8gb 580.  when attempting to set up turbo clkernels im getting the following error message.  I placed the following in the command line: "-clkernel 332223333232"   Any help would be appreciated.

2019.01.18:06:58:02.616: main Phoenix Miner 4.1c Windows/msvc - Release build
2019.01.18:06:58:02.616: main Cmd line: -pool ssl://us1.ethermine.org:5555 -pool2 us1.ethermine.org:4444 -wal 0xf9f81Af91d261d9934900072182FCa3fef906424.Android1 -proto 3 -clkernel 332223333232

.......

2019.01.18:06:58:17.171: GPU7 GPU7: DAG  25%
2019.01.18:06:58:17.368: GPU11 GPU11: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:17.458: GPU11 GPU11: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:17.634: GPU8 GPU8: DAG  25%
2019.01.18:06:58:17.785: GPU12 GPU12: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:17.884: GPU12 GPU12: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:17.928: GPU9 GPU9: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:18.014: GPU9 GPU9: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:18.102: GPU5 GPU5: DAG  31%
2019.01.18:06:58:18.229: GPU2 GPU2: DAG  75%
2019.01.18:06:58:18.352: GPU3 GPU3: DAG  94%
2019.01.18:06:58:18.403: GPU1 GPU1: DAG  75%
2019.01.18:06:58:18.559: GPU6 GPU6: DAG  50%
2019.01.18:06:58:18.653: GPU3 GPU3: DAG generated in 5.0 s (584.5 MB/s)
2019.01.18:06:58:18.654: GPU3 GPU3: Using Ethash OCL kernels (Ellesmere; -clkernel 2)
2019.01.18:06:58:18.654: GPU3 GPU3: no -gt value specified, switching to auto-tune
2019.01.18:06:58:18.654: GPU3 GPU3: starting auto-tune process
2019.01.18:06:58:18.960: GPU7 GPU7: DAG  50%
2019.01.18:06:58:19.233: GPU8 GPU8: DAG  50%
2019.01.18:06:58:19.247: GPU4 GPU4: DAG  44%
2019.01.18:06:58:19.538: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

Increase the vitual memory of your system to at least 76 GB (12 X 2 X 3GB for the dags and 4GB for OS and apps)

[bategojko74]

PhoenixMiner How long now will this miner version work? till what dag?

You can find it yourself. Try the option -bench 1000

[cadj92]

2019.01.16:19:39:00.717: main Phoenix Miner 4.0b Windows/msvc - Release build
2019.01.16:19:39:00.717: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
2019.01.16:19:39:00.717: main No CUDA driver found
2019.01.16:19:39:06.406: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2019.01.16:19:39:06.406: main OpenCL platform: OpenCL 2.1 AMD-APP (2766.5)
2019.01.16:19:39:06.406: main Available GPUs for mining:

how do i fix this problem?

  You have upgraded your driver to version that is not yet supported by PhoenixMiner (see the line Unknown OpenCL driver version! Hashrate and stale shares may suffer in the log, it will be printed as yellow warning on your screen when the miner starts). It is not a good idea to update to drivers that are newer than the release of PhoenixMiner you are using because this means we weren't able to test this release of PhoenixMiner with these drivers and they probably won't work well (or at all). To fix the problem either upgrade to PhoenixMiner 4.1c, which supports AMD drivers up to and including 19.1.1.

Sadly 4.1c does not support 19.1.1, as it gives the Unknown OpenCL version error and suffers a hashrate loss because of it.
-clkernel 3 mode does not even work with it. ( clSetKernelArg (-49) )

[UnclWish]

2019.01.16:19:39:00.717: main Phoenix Miner 4.0b Windows/msvc - Release build
2019.01.16:19:39:00.717: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
2019.01.16:19:39:00.717: main No CUDA driver found
2019.01.16:19:39:06.406: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2019.01.16:19:39:06.406: main OpenCL platform: OpenCL 2.1 AMD-APP (2766.5)
2019.01.16:19:39:06.406: main Available GPUs for mining:

how do i fix this problem?

  You have upgraded your driver to version that is not yet supported by PhoenixMiner (see the line Unknown OpenCL driver version! Hashrate and stale shares may suffer in the log, it will be printed as yellow warning on your screen when the miner starts). It is not a good idea to update to drivers that are newer than the release of PhoenixMiner you are using because this means we weren't able to test this release of PhoenixMiner with these drivers and they probably won't work well (or at all). To fix the problem either upgrade to PhoenixMiner 4.1c, which supports AMD drivers up to and including 19.1.1.

Sadly 4.1c does not support 19.1.1, as it gives the Unknown OpenCL version error and suffers a hashrate loss because of it.
-clkernel 3 mode does not even work with it. ( clSetKernelArg (-49) )

I have 19.1.1 installed and latest version of miner works normal. RX 580 8 Gb Windows 10.

[prominertools]

The third beta of the new release is out (note that 4.1b wasn't released as we found some small bugs before it was out). You can download PhoenixMiner 4.1c from here:

Added to the mirror at https://prominertools.com/phoenix-miner/

[twotwosix]

What is the best driver for ethereum? Im using 18.6.1

[VasilyS]

Latest version is working good, I finally launched it on 12 GPU rig. But unfortunately, there is no fan control on 19.1.1 AMD drivers. As I see, the same problem is with Claymore. The problem is in drivers, 19.1.1 AMD drivers are worse than 18.5.1.

[Digital_Seytan]

is there a way to disable the ssl 5555, delivers far too many problems often crashes windows 10

[khafan11]

   (also to all miners experiencing problems with PhoenixMiner 3.5 and below versions when trying to create the DAG):

   The versions of PhoenixMiner before 4.0 only support DAG epoch up to 235. ETC passed epoch 235 a few weeks ago, and recently ETH also passed DAG epoch 235 and is now on 236. The unfortunate result is that the old version(s) of PhoenixMiner won't be able to create DAG or mine ETH or ETC any more - you must upgrade to PhoenixMiner 4.x.
   We have printed this warning here during the release of PhoenixMiner 4.0 but admittedly we could have done much better job with making it visible. We will pin this message in the first post too.

After trying I also found 4.0b version does work now although it wasn’t working well before additionally it runs my rtx2070s hash a bit slower than versions 3.5 did

   We are working on RTX20x0 optimizations but they won't be ready until the next release.

i use Adrenalin 2019 Edition 18.12.2 and rx580 8gb but in this new 4.X ver i can't use -tt and -tmax and everything about fan control  is not working
in ver  3.5 i set this and worked perfectly
-tt 47
-tmax 52
-fanmin 10
-fanmax 55

but now i use the same commend but when gpu go to 59 degree  fan start on 24% and after it's cooling they be shutdown and again this Repeat 59start ......... 

[deforester]

Noticed the same thing with the latest version and some RX580 under Linux.

Had -tt set to 68 and one GPU kept creeping up way past 80 degrees and the fan was idling at 23%.

[cadj92]

Sadly 4.1c does not support 19.1.1, as it gives the Unknown OpenCL version error and suffers a hashrate loss because of it.
-clkernel 3 mode does not even work with it. ( clSetKernelArg (-49) )

I have 19.1.1 installed and latest version of miner works normal. RX 580 8 Gb Windows 10.

That`s strange... Well, I guess I can go back to 18.12.3 until we get a fix.

2019.01.19:21:21:33.279: main Phoenix Miner 4.1c Windows/msvc - Release build
2019.01.19:21:21:33.279: main Cmd line: -pool @@@
2019.01.19:21:21:33.279: main No CUDA driver found
2019.01.19:21:21:35.924: main OpenCL driver version: 19.1.1
2019.01.19:21:21:35.924: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2019.01.19:21:21:35.924: main OpenCL platform: OpenCL 2.0 AMD-APP (2348.3)
2019.01.19:21:21:35.924: main Ignoring old OpenCL driver(s), using driver version 19.1.1
2019.01.19:21:21:35.924: main Available GPUs for mining:
2019.01.19:21:21:35.924: main GPU1: Radeon (TM) RX 480 Graphics (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.19:21:21:36.002: main ADL library initialized

[evlo]

I see totally minuscule reported hasharete improvement with "3" kernels, wonder if there would be any real hashrate improvement.