PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[Sikkan666]

mining atheios...works great until devfee kicks in..all my rigs quit... is that because they have 3 GB cards? never experienced such behaviour before..

[1714133274]

1714133274

[1714133274]

1714133274

[1714133274]

1714133274

[1714133274]

1714133274

[1714133274]

1714133274

[pbfarmer]

mining atheios...works great until devfee kicks in..all my rigs quit... is that because they have 3 GB cards? never experienced such behaviour before..

More likely they're switching to an algo for which your GPUs are under-tuned.  Watch logs/console to see what they're switching to, and try tuning your GPUs for that coin/algo.

[Karlitosss]

How can I write lets say -clkernel 3 for GPU 1 2 3 5 9  and -clkernel 2 for GPU 4,6,7,8,10

Thanks in advance.

***Also, I get slower hash rate with my 4GB cards. I guess that is normal with past the DAG epoch 235?

like this:

-clkernel 3332322232

It doesn't work.

[lesjokolat]

How can I write lets say -clkernel 3 for GPU 1 2 3 5 9  and -clkernel 2 for GPU 4,6,7,8,10

Thanks in advance.

***Also, I get slower hash rate with my 4GB cards. I guess that is normal with past the DAG epoch 235?

like this:

-clkernel 3332322232

It doesn't work.

how about this?

-clkernel 3,3,3,2,3,2,2,2,3,2

[UnclWish]

AMD released 19.2.2 driver but miner didn't support even 19.2.1...

[zinou51]

MINER WORK PERFECTLY WITH AMD 19.2.2 DRIVER
https://imgur.com/a/4Jb9dK7

[UnclWish]

MINER WORK PERFECTLY WITH AMD 19.2.2 DRIVER

Miner work with any driver. But not "perfectly". If it didn't support installed driver it causes many stale shares and can't use new and double kernels.

[rfyuio]

i connect http://192.168.5.192:8545,my own solo node.then start phoenixminer,for about 1 minute,then error,quit.error message:stratum thread not responsive 51s,hiw can i do.
i start solo,not stratum pool,i'm solo,why error messafe:stratum thread ......

[Lazar77]

i connect http://192.168.5.192:8545,my own solo node.then start phoenixminer,for about 1 minute,then error,quit.error message:stratum thread not responsive 51s,hiw can i do.
i start solo,not stratum pool,i'm solo,why error messafe:stratum thread ......

I've the same problem using local eth-proxy and http://192.... als pool adress.
In previous Phoenix versions this was working without problems, but since 4.1 it always brings the message "stratum thread not responsive"

Hope Phoenix dev can fix that easily?

[Digital_Seytan]

Why Evry version of PM miner  works on AMD cards and not more working on NVidia cards Developer    

NOw i use Bminer and NBminer works fine with Nvidia cards

[ManDoneKTM]

Why Evry version of PM miner  works on AMD cards and not more working on NVidia cards Developer    

NOw i use Bminer and NBminer works fine with Nvidia cards

i have 1080 and 1070 running very smooth on PM

[Digital_Seytan]

Why Evry version of PM miner  works on AMD cards and not more working on NVidia cards Developer    

NOw i use Bminer and NBminer works fine with Nvidia cards

i have 1080 and 1070 running very smooth on PM

version PM before 4.1.c dont work with Nvidia cards ,last version 4.1.c and all versions before working good with AMD cards

[sxemini]

Why Evry version of PM miner  works on AMD cards and not more working on NVidia cards Developer    

NOw i use Bminer and NBminer works fine with Nvidia cards

i have 1080 and 1070 running very smooth on PM

version PM before 4.1.c dont work with Nvidia cards ,last version 4.1.c and all versions before working good with AMD cards

Phönixminer has been working with NVIDIA cards since the first release.

[camchimonline]

Progpow active on 7280000, does Phoenix miner support it?

[lrdmafia]

hello, please help me,  How can I set up a second miner in phoenix the first is eth, and the second I want to be nicehash, i use hiveos ,

[raisedbyaliens]

Can someone please help me i cannot seem to find any success with this. i do not know what i am doing wrong it seems that everytime DAG approaches 100% the miner crashes and needs to restart

2019.02.20:12:41:35.421: main Phoenix Miner 4.1c Windows/msvc - Release build
2019.02.20:12:41:35.421: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x6e9219E93f72D45e4c2043Dc2ee43cE6D3DEB088
2019.02.20:12:41:35.686: main CUDA version: 10.0, CUDA runtime: 8.0
2019.02.20:12:41:35.714: main No OpenCL platforms found
2019.02.20:12:41:35.714: main Available GPUs for mining:
2019.02.20:12:41:35.714: main GPU1: GeForce GTX 980 Ti (pcie 2), CUDA cap. 5.2, 6 GB VRAM, 22 CUs
2019.02.20:12:41:35.720: main NVML library initialized
2019.02.20:12:41:35.726: main Nvidia driver version: 418.91
2019.02.20:12:41:36.759: main Eth: Loading pools from epools.txt
2019.02.20:12:41:36.760: main Eth: the pool list contains 7 pools (2 from command-line)
2019.02.20:12:41:36.760: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2019.02.20:12:41:36.760: main Starting GPU mining
2019.02.20:12:41:36.760: wdog Starting watchdog thread
2019.02.20:12:41:37.565: main Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: EthProxy)
2019.02.20:12:41:37.588: eths Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (2606:4700:90:0:bda0:4092:8f4f:4658)
2019.02.20:12:41:37.637: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0x6e9219E93f72D45e4c2043Dc2ee43cE6D3DEB088"]}

2019.02.20:12:41:37.767: main Listening for CDM remote manager at port 3333 in read-only mode
2019.02.20:12:41:37.779: main GPU1: 43C 22%
2019.02.20:12:41:37.907: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2019.02.20:12:41:37.908: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.02.20:12:41:38.056: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x410a736657afb44eea9c5ae09bf5ab0c0e8caa2e11f241245d87947a56e0decf","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90a6"]}
2019.02.20:12:41:38.056: eths Eth: New job #410a7366 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:41:38.057: GPU1 GPU1: Starting up... (0)
2019.02.20:12:41:38.057: GPU1 GPU1: Generating ethash light cache for epoch #241
2019.02.20:12:41:40.208: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x9d856df41c6a8a61a059e2ee71398aa8a0742ed557dd4e20723a9612df99f7e9","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90a7"]}
2019.02.20:12:41:40.208: eths Eth: New job #9d856df4 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:41:41.155: GPU1 Light cache generated in 3.1 s (14.9 MB/s)
2019.02.20:12:41:41.416: GPU1 GPU1: Allocating DAG (2.90) GB; good for epoch up to #243
2019.02.20:12:41:41.652: GPU1 GPU1: Allocating light cache buffer (46.4) MB; good for epoch up to #243
2019.02.20:12:41:41.674: GPU1 GPU1: Generating DAG for epoch #241
2019.02.20:12:41:42.579: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2019.02.20:12:41:43.394: GPU1 GPU1: DAG  19%
2019.02.20:12:41:44.149: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xe525c9a865eff292081d8e520be179751872f08d2bd264607e9cf2738da76167","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90a7"]}
2019.02.20:12:41:44.149: eths Eth: New job #e525c9a8 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:41:44.791: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x2abb35461821cfd30e28978070f5a15aeb6fddf2b67333ef613a34e60bd3f096","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90a8"]}
2019.02.20:12:41:44.791: eths Eth: New job #2abb3546 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:41:45.113: GPU1 GPU1: DAG  41%
2019.02.20:12:41:45.499: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xc5a38e11e79474abcbc36ef908e1f457af7cdc6177234630806eb72e8e7e77e6","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90a9"]}
2019.02.20:12:41:45.499: eths Eth: New job #c5a38e11 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:41:46.831: GPU1 GPU1: DAG  63%
2019.02.20:12:41:47.637: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.02.20:12:41:47.734: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2019.02.20:12:41:47.785: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0xc5a38e11e79474abcbc36ef908e1f457af7cdc6177234630806eb72e8e7e77e6","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90a9"]}
2019.02.20:12:41:48.551: GPU1 GPU1: DAG  84%
2019.02.20:12:41:49.510: GPU1 GPU1: DAG generated in 7.8 s (376.7 MB/s)
2019.02.20:12:41:49.532: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x1dcba4ddc527aa77b1535f0f2fd6614c3eb258c1425c37a1d4fd8d5bb3a59298","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90a9"]}
2019.02.20:12:41:49.532: eths Eth: New job #1dcba4dd from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:41:50.003: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x989a33be1866be1b8d303763dd76111adb6c6a3fef1d5b9ff4eb2f4e47162760","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90aa"]}
2019.02.20:12:41:50.004: eths Eth: New job #989a33be from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:41:52.923: GPU1 CUDA error in CudaProgram.cu:329 : the launch timed out and was terminated (702)
2019.02.20:12:41:52.923: GPU1 GPU1 search error: the launch timed out and was terminated
2019.02.20:12:41:53.113: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2019.02.20:12:41:53.770: wdog Thread(s) not responding. Restarting.
2019.02.20:12:41:53.970: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xc32a060b7460ae588562dfecfc6bf8ca61c58c7bf48c87e34ef8e59304b2cebc","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90aa"]}
2019.02.20:12:41:53.970: eths Eth: New job #c32a060b from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:41:53.991: GPU1 GPU1: Starting up... (0)
2019.02.20:12:41:53.993: GPU1 CUDART error in CudaProgram.cu:57 : all CUDA-capable devices are busy or unavailable (46)
2019.02.20:12:41:53.993: GPU1 GPU1 initMiner error: all CUDA-capable devices are busy or unavailable
2019.02.20:12:41:57.637: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.02.20:12:41:57.637: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0","0xdc798fb85ac2c04bcec7626e26c7d93e6b3091bb5b9e3a0755d9e4e405a5d8c8"]}

2019.02.20:12:41:57.787: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0xc32a060b7460ae588562dfecfc6bf8ca61c58c7bf48c87e34ef8e59304b2cebc","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90aa"]}
2019.02.20:12:41:57.985: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x93984e6629b43b76ac091b7ba03da14cdd0b01fe9e39f862b3c3fde4885c0640","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e90aa"]}
2019.02.20:12:41:57.985: eths Eth: New job #93984e66 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:41:58.002: GPU1 GPU1: Starting up... (0)
2019.02.20:12:41:58.003: GPU1 CUDART error in CudaProgram.cu:57 : all CUDA-capable devices are busy or unavailable (46)
2019.02.20:12:41:58.003: GPU1 GPU1 initMiner error: all CUDA-capable devices are busy or unavailable
2019.02.20:12:41:58.122: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00

[lesjokolat]

Can someone please help me i cannot seem to find any success with this. i do not know what i am doing wrong it seems that everytime DAG approaches 100% the miner crashes and needs to restart

2019.02.20:12:15:45.242: main Phoenix Miner 4.1c Windows/msvc - Release build
2019.02.20:12:15:45.242: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x6e9219E93f72D45e4c2043Dc2ee43cE6D3DEB088.Rig001
2019.02.20:12:15:45.495: main CUDA version: 10.0, CUDA runtime: 8.0
2019.02.20:12:15:45.520: main No OpenCL platforms found
2019.02.20:12:15:45.520: main Available GPUs for mining:
2019.02.20:12:15:45.521: main GPU1: GeForce GTX 980 Ti (pcie 2), CUDA cap. 5.2, 6 GB VRAM, 22 CUs
2019.02.20:12:15:45.527: main NVML library initialized
2019.02.20:12:15:45.534: main Nvidia driver version: 418.91
2019.02.20:12:15:46.488: main Eth: Loading pools from epools.txt
2019.02.20:12:15:46.489: main Eth: the pool list contains 7 pools (2 from command-line)
2019.02.20:12:15:46.489: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2019.02.20:12:15:46.489: main Starting GPU mining
2019.02.20:12:15:46.489: wdog Starting watchdog thread
2019.02.20:12:15:47.313: main Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: EthProxy)
2019.02.20:12:15:47.351: eths Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (2606:4700:90:0:bda0:4092:8f4f:4658)
2019.02.20:12:15:47.391: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0x6e9219E93f72D45e4c2043Dc2ee43cE6D3DEB088.Rig001"]}

2019.02.20:12:15:47.515: main Listening for CDM remote manager at port 3333 in read-only mode
2019.02.20:12:15:47.529: main GPU1: 46C 22%
2019.02.20:12:15:47.668: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2019.02.20:12:15:47.669: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.02.20:12:15:47.818: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x4b9ab8b7bb57e6f54fd1d8457be6753831136eceb2d3052859962c9bc45c36d1","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e9052"]}
2019.02.20:12:15:47.818: eths Eth: New job #4b9ab8b7 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:15:47.820: GPU1 GPU1: Starting up... (0)
2019.02.20:12:15:47.820: GPU1 GPU1: Generating ethash light cache for epoch #241
2019.02.20:12:15:49.775: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xe2dc5fea3622fed249e2584cbd02b7268f24695ce6828b599f3fd184de626d4b","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e9053"]}
2019.02.20:12:15:49.775: eths Eth: New job #e2dc5fea from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:15:50.976: GPU1 Light cache generated in 3.2 s (14.6 MB/s)
2019.02.20:12:15:51.237: GPU1 GPU1: Allocating DAG (2.90) GB; good for epoch up to #243
2019.02.20:12:15:51.477: GPU1 GPU1: Allocating light cache buffer (46.4) MB; good for epoch up to #243
2019.02.20:12:15:51.498: GPU1 GPU1: Generating DAG for epoch #241
2019.02.20:12:15:52.512: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2019.02.20:12:15:53.195: GPU1 GPU1: DAG  19%
2019.02.20:12:15:53.975: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x40e44a3d94432d0db5e29a581bc7fc827773d3d51078533f1d5a599d2671c54f","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e9054"]}
2019.02.20:12:15:53.976: eths Eth: New job #40e44a3d from ssl://eu1.ethermine.org:5555; diff: 4000MH
2019.02.20:12:15:54.892: GPU1 GPU1: DAG  41%
2019.02.20:12:15:56.589: GPU1 GPU1: DAG  63%
2019.02.20:12:15:57.392: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.02.20:12:15:57.514: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2019.02.20:12:15:57.541: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x40e44a3d94432d0db5e29a581bc7fc827773d3d51078533f1d5a599d2671c54f","0xfa8b22f3951b9097cafa990738694a808dbc03361c9d55d9b3157b6f9f99de6b","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6e9054"]}
2019.02.20:12:15:58.287: GPU1 GPU1: DAG  84%
2019.02.20:12:15:59.234: GPU1 GPU1: DAG generated in 7.7 s (381.6 MB/s)
2019.02.20:12:16:02.705: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2019.02.20:12:16:02.793: GPU1 CUDA error in CudaProgram.cu:329 : unknown error (999)
2019.02.20:12:16:02.793: GPU1 GPU1 search error: unknown error

I think its the driver being used is an older CUDA driver. Can you upgrade to 9.x?

Also if you can i recommend stratum over getwork.

[raisedbyaliens]

thanks for the quick response i am completely new to this but spend a good amount of time trying to figure this out yesterday .

[lesjokolat]

thanks for the quick response i am completely new to this but spend a good amount of time trying to figure this out yesterday .

very welcome! Its a fun hobby but can make you want to pull your hair out.

I recommend for that type of card start with 9.x driver not 10 in case its too new for card...

Also make sure virtual memory is not to low. For a few cards no big deal usually.

[raisedbyaliens]

thanks for the quick response i am completely new to this but spend a good amount of time trying to figure this out yesterday .

very welcome! Its a fun hobby but can make you want to pull your hair out.

I recommend for that type of card start with 9.x driver not 10 in case its too new for card...

Also make sure virtual memory is not to low. For a few cards no big deal usually.

ok  so if understand correctly i should use 9.xxx instead of the 10... i made sure i had most recent drivers but the new one may not be compatible yet is what you are sayin?