lolMiner 1.64: Fastest Kaspa miner in market

[R00d]

Any setup for 580 8gb and voltage setup?

Have you found any good settings with afterburner on the Rx580 or tried a different display driver versions?

for the RX480 8GB I use settings are as follows:

AMD Driver 18.6.1

Global wattman:
Core 1300
Memory 2100
power limit -15%

Afterburner:
custom fan curve to equal 6200rpms as 18.6.1 global wattman only goes to 5200rpms

Friends RX480 8gb can clock 2200 memory, takes sols over 30. some cards are luckier than others,...

for beam?

dont mine beam. Those are the settings for all algos I mine, equi, ethash, crypto/lite/heavy. if I did mine Beam those would be the settings unless card became too hot, then id reduce power limit by 5% until stable.

[1714123738]

1714123738

[1714123738]

1714123738

[Lolliedieb]

hello folks, can sombedoy explain me , my 4 rigs with RX580 8gb  ,give 10-11 sol/s  , no matther how clocks is, when set to 1126 gpu / 1900 memmory same hashrate when set clocks to 1200 gpu  / 2150 memmory, thank's.

much more core relevant algo...so mem speed doesnt matter that much like it would on CN

Its kind of both here. About 20% of the algorithm is very clock heavy, the other more memory heavy. What reduces the effect of the memory clock are two things: First of all we are more instruction bound, so we are at the limit of the number of memory instructions the chip can do rather then the actual memory bandwidth limit. And then its also dependent on my implementation that tries to utilize the GPUs L2 cache well - and that is more on the clock side

Thats why lolMiner likes clocks quite well.

Any setup for 580 8gb and voltage setup?

I know most larger farms are using 1130-1200 (core) / 1950(+, mem) and try to undervolt to 850 mV and lower.

Is it possible to make a solver for Equihash150/5 so that you can mine on 2gb GPUs?

No, almost impossible.
But from today you can mine with 3G cards
https://github.com/Lolliedieb/lolMiner-preview/releases/tag/0.7_a3

 

[justoiurii]

Thanks for new ver) What changes are in it?

[sin70]

But from today you can mine with 3G cards
https://github.com/Lolliedieb/lolMiner-preview/releases/tag/0.7_a3

problem on windows 7... 

https://i.ibb.co/V3NMLTB/1060.jpg

[Bartender76]

on BEAM my 570s 4GB and 470s 4GB went from about 10.8 down to 8 on alpha 3 compared to alpha 2b. R290 4GB and vega56 no problems.

[stolarzz]

on BEAM my 570s 4GB and 470s 4GB went from about 10.8 down to 8 on alpha 3 compared to alpha 2.

One of my rigs is not starting with newest version. It's failing on initializing gpus.

[prokpn]

lolMiner 0.7 alpha3


error on all rigs  1060 3G
Windows 10
DRIVER 390.65-desktop-win10-64bit-international-whql


https://i.ibb.co/BfxGmCd/111.jpg

[webgkv]

yea, not working with MSI 1060 3Gb Gaming

[kostepanych2]

Trying to mine Beam on R9 280 in HiveOs, but it not works...
I get this:

Code:

Warning: No user configuration file found. You can define it by --userCFG  
Warning: No user configuration file defined in command line or file not found.
Using only command line settings.
Reading pool data from command line
lolMiner is configured to mine Beam(BEAM), Equihash 150/5 - BeamHash

Setup Miner...
 Device 0:
    Name:    AMD Radeon HD 7900 Series
    Address: 1:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  3001 MByte (92033031413 MByte free)

lolminer exited, waiting to cooldown a bit

[CryptoDocker]

Trying to mine Beam on R9 280 in HiveOs, but it not works...
I get this:

Code:

Warning: No user configuration file found. You can define it by --userCFG  
Warning: No user configuration file defined in command line or file not found.
Using only command line settings.
Reading pool data from command line
lolMiner is configured to mine Beam(BEAM), Equihash 150/5 - BeamHash

Setup Miner...
 Device 0:
    Name:    AMD Radeon HD 7900 Series
    Address: 1:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  3001 MByte (92033031413 MByte free)

lolminer exited, waiting to cooldown a bit

It picks up the card alright but:

Warning: No user configuration file found. You can define it by --userCFG  
Warning: No user configuration file defined in command line or file not found.
Using only command line settings.

Check your config files

[kostepanych2]

Trying to mine Beam on R9 280 in HiveOs, but it not works...
I get this:

Code:

Warning: No user configuration file found. You can define it by --userCFG  
Warning: No user configuration file defined in command line or file not found.
Using only command line settings.
Reading pool data from command line
lolMiner is configured to mine Beam(BEAM), Equihash 150/5 - BeamHash

Setup Miner...
 Device 0:
    Name:    AMD Radeon HD 7900 Series
    Address: 1:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  3001 MByte (92033031413 MByte free)

lolminer exited, waiting to cooldown a bit

It picks up the card alright but:

Warning: No user configuration file found. You can define it by --userCFG  
Warning: No user configuration file defined in command line or file not found.
Using only command line settings.

Check your config files

I not use config file.
I use command line settings.

[nansafap]

not working for 1060 3gb
i tried on win10 , driver nvidia 399

[siagirl]

Hello today all my rigs in pool was offline but they still minig... I make a restart and everything is ok now but for who they mine in this two houers offline?

[rdome]

R9 280x works 8.8 to 9.3 win 10
not bad at all, in same rig rx 570 has 10 sol

[mk111]

Lolliedieb please add AMD Grin support

[jeep222]

yea, not working with MSI 1060 3Gb Gaming

windows 7 palit 1060 3G  Works
http://dl3.joxi.net/drive/2019/01/25/0015/4067/1028067/67/72527676b2.jpg

[Saydia]

Your miner already supports BEAM.
Are you working on adding an algorithm for GRIN?

[BoozyTalking]

Not work with RX 560 4GB:
https://i.imgur.com/tlUJDLh.png

[gerixusyu]

yea, not working with MSI 1060 3Gb Gaming

windows 7 palit 1060 3G  Works
http://dl3.joxi.net/drive/2019/01/25/0015/4067/1028067/67/72527676b2.jpg

Which driver use for nVidia 1060 3gb???

[platedscrap]

1060 3g same problem .. gets to start mining then the miner stops and closes itself