nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
June 09, 2014, 12:19:08 PM |
|
My platforms show 2.8KH. Pool shows me 2.4KH. Some deceive us , but who?
mines the same, supposed to have about 2950H/s but pool barely goes over 2400h/s...
|
|
|
|
IntroVert
|
|
June 09, 2014, 12:45:37 PM |
|
Guys, to me there is a big difference than what shows me the program and what my pool account as hash. To you is there such a difference. It is more than 30% yield by making graphics unreasonable.
yes,i have the same problem.I mine at monero.com and gpu miner shows 1606kh/s and i should be getting 8.25xmr-% dev fee+%2 miner fee:7.6xmr with current difficulty but i only got 6.8 xmr today.Either miner values are not correct or pool takes more than %2. Did you account for orphans? Look at your pool and see what the percentage of orphans is. Subtract that percentage, and you probably will end up close to what you got paid.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
June 09, 2014, 12:52:40 PM |
|
Miner shows raw rate and this value is correct. Pool shows final rate so it is always lower. Also pool does not accept outdated shares (1-2%) though it does not return any errors about it so you don't see it in miner. Also don't forget about "Outdated share found - skip" messages - it's about 3-5% of shares.
|
|
|
|
svetliopi44
|
|
June 09, 2014, 02:43:33 PM |
|
Miner shows raw rate and this value is correct. Pool shows final rate so it is always lower. Also pool does not accept outdated shares (1-2%) though it does not return any errors about it so you don't see it in miner. Also don't forget about "Outdated share found - skip" messages - it's about 3-5% of shares.
Thank you, you're right. Block received: 291 Block orphans: 97 Excuse me if I offended you.
|
|
|
|
superresistant
Legendary
Offline
Activity: 2142
Merit: 1131
|
|
June 09, 2014, 03:08:12 PM |
|
Hi everyone. I opened a new pool for duckNote : duck.crypto-pool.frIt is as great as monero.crypto-pool.fr because it has all improvements & fix. The address is : stratum+tcp://duck.crypto-pool.fr:6677Have a try
|
|
|
|
Lloydimiller4
Full Member
Offline
Activity: 186
Merit: 100
Monero
|
|
June 09, 2014, 07:42:38 PM |
|
How soon will a Linux version be released? I can't wait to try this out.
|
XMR: 43uAvbYL7z9NrKQig2DswM69XaeDug1Rf8v4Un1ndssb2To51Vojz2uZ21jFumWsCcgvqZ9hPuE3fEr xKoGCkHU8CzqHFiS
|
|
|
JohnnyKovak
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 09, 2014, 11:14:27 PM |
|
How soon will a Linux version be released? I can't wait to try this out. Please +1/3+333333 Linux .....on my Windows over heat turns off every 2 hours still got 88834.01900095 BCN many Thanks Mr Clay Moore
|
|
|
|
pinoyminer1977
|
|
June 10, 2014, 06:12:41 AM |
|
Hi, I have these warnings when I start my miner, can somebody help me, what is wrong? Is this this an issue of my GPU driver? I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
|
|
|
|
MrJay
Member
Offline
Activity: 115
Merit: 10
|
|
June 10, 2014, 06:56:34 AM |
|
Hi,
Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
I have a 4x msi 7950 rig as well and mine appears to be hashing around 1066h/s, core clocks between 1070 - 1100, looks like mem clock is not used as it is sitting at 1000mhz.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
June 10, 2014, 07:30:31 AM |
|
Hi, I have these warnings when I start my miner, can somebody help me, what is wrong? Is this this an issue of my GPU driver? I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards? Please read what miner shows during starting. Hint: use Catalyst 13.12, it will remove warnings and increase mining speed a lot.
|
|
|
|
nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
June 10, 2014, 08:20:01 AM |
|
Hi,
Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
I have a 4x msi 7950 rig as well and mine appears to be hashing around 1066h/s, core clocks between 1070 - 1100, looks like mem clock is not used as it is sitting at 1000mhz. my 2 alone get 605H/s, they can break 300 each easy and stable.
|
|
|
|
MrJay
Member
Offline
Activity: 115
Merit: 10
|
|
June 10, 2014, 08:21:44 AM |
|
Hi,
Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
I have a 4x msi 7950 rig as well and mine appears to be hashing around 1066h/s, core clocks between 1070 - 1100, looks like mem clock is not used as it is sitting at 1000mhz. my 2 alone get 605H/s, they can break 300 each easy and stable. What clocks are you running then?
|
|
|
|
nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
June 10, 2014, 08:40:20 AM |
|
Hi,
Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
I have a 4x msi 7950 rig as well and mine appears to be hashing around 1066h/s, core clocks between 1070 - 1100, looks like mem clock is not used as it is sitting at 1000mhz. my 2 alone get 605H/s, they can break 300 each easy and stable. What clocks are you running then? 1140/1250
|
|
|
|
MrJay
Member
Offline
Activity: 115
Merit: 10
|
|
June 10, 2014, 09:09:55 AM |
|
Hi,
Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
I have a 4x msi 7950 rig as well and mine appears to be hashing around 1066h/s, core clocks between 1070 - 1100, looks like mem clock is not used as it is sitting at 1000mhz. my 2 alone get 605H/s, they can break 300 each easy and stable. What clocks are you running then? 1140/1250 Thanks, now lets see how stable this is - Speed: 1207 h/s
|
|
|
|
nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
June 10, 2014, 09:12:13 AM |
|
Hi,
Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
I have a 4x msi 7950 rig as well and mine appears to be hashing around 1066h/s, core clocks between 1070 - 1100, looks like mem clock is not used as it is sitting at 1000mhz. my 2 alone get 605H/s, they can break 300 each easy and stable. What clocks are you running then? 1140/1250 Thanks, now lets see how stable this is - Speed: 1207 h/s i also have the undervolt bios at 0.975 and no issues
|
|
|
|
atp1916
Legendary
Offline
Activity: 854
Merit: 1000
|
|
June 10, 2014, 10:02:51 AM |
|
Hi,
I have these warnings when I start my miner, can somebody help me, what is wrong? .. .. .. Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower). Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s.
|
|
|
|
pinoyminer1977
|
|
June 10, 2014, 10:09:37 AM |
|
Hi,
I have these warnings when I start my miner, can somebody help me, what is wrong? .. .. .. Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower). Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s. THANK YOU for the replies, let me install 13.12 and add 1100/1500.
|
|
|
|
nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
June 10, 2014, 10:10:21 AM |
|
gigabyte WF3 280x seem to be very terrible at this algo..... barley do 300 which i believe is odd as my asus 280x's can do 360h/s easy...... wonder if it has something to do with the cards being voltage locked from factory, which leaves very little OC room....
|
|
|
|
pinoyminer1977
|
|
June 10, 2014, 10:34:26 AM |
|
Hi,
I have these warnings when I start my miner, can somebody help me, what is wrong? .. .. .. Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower). Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s. THANK YOU for the replies, let me install 13.12 and add 1100/1500. Ok, so I have installed 13.12 Catalyst on my 4-MSI 7950 and my settings below: setx GPU_MAX_ALLOC_PERCENT 100 NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x --gpu-engine 1000 --gpu-memclock 1500 This setting gives me a total of 1100 h/s .......and 275 h/s each, can I still push this to 300 h/s? I don't know how.... Also for 3 - R9 290s are getting a total of 1280 h/s with settings below: setx GPU_MAX_ALLOC_PERCENT 100 NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x Actually no memclock and gpu engine settings, please post your settings here if you can get higher than mine.
|
|
|
|
nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
June 10, 2014, 10:37:58 AM |
|
Hi,
I have these warnings when I start my miner, can somebody help me, what is wrong? .. .. .. Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower). Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s. THANK YOU for the replies, let me install 13.12 and add 1100/1500. Ok, so I have installed 13.12 Catalyst on my 4-MSI 7950 and my settings below: setx GPU_MAX_ALLOC_PERCENT 100 NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x --gpu-engine 1000 --gpu-memclock 1500 This setting gives me a total of 1100 h/s .......and 275 h/s each, can I still push this to 300 h/s? I don't know how.... Also for 3 - R9 290s are getting a total of 1280 h/s with settings below: setx GPU_MAX_ALLOC_PERCENT 100 NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x Actually no memclock and gpu engine settings, please post your settings here if you can get higher than mine. for the 7950's set 1140/1250 and that will wield about 302.5H/s per card, depending card quality and brand etc...
|
|
|
|
|