opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
April 21, 2013, 11:14:21 PM |
|
Could somebody tell me how much bandwidth an Avalon consumes in KB/s? My connection is 800 KB/s down and 100 KB/s up, but is also needed for browsing, downloading etc.
Jesus, where do you live? In a third world country, like italy. I have the same connection (well, i have 3 of that connections, bounded togheter to have something somewhat usable). The stratum protocol should use something like 1Kbps or 1KBps, not sure. Italy? Then how does the Pope do his online banking?
|
|
|
|
irritant
Sr. Member
Offline
Activity: 473
Merit: 250
Sodium hypochlorite, acetone, ethanol
|
|
April 21, 2013, 11:37:23 PM Last edit: April 21, 2013, 11:50:20 PM by irritant |
|
Nailed the root cause of my problem: it's a Control Unit. When swapped for a CU board from another Avalon, it started mining normally.
Now, since one of the CUs is dead, I need to check out 4-module configuration. Anyone using 4-module setup currently? Any advice - what PSU is needed, do I need to change some jumpers on control or power board or something?
I think you need a 1000 watt PSU with 4 modules (on the wiki it says 750 watt but in the confirmed working list a 1000 watt), it has one confirmed working on the list https://en.bitcoin.it/wiki/Avalon#Comfirmed_working_PSU_list but others may (or may not) work also in the webgui you have to select the number of modules, (maybe someone else can fill in, bitcoinfoundation has a 4 module unit, dont know what PSU they have tho, maybe the Enermax)
|
|
|
|
GodfatherBond
|
|
April 22, 2013, 01:40:30 PM |
|
Nailed the root cause of my problem: it's a Control Unit. When swapped for a CU board from another Avalon, it started mining normally.
Now, since one of the CUs is dead, I need to check out 4-module configuration. Anyone using 4-module setup currently? Any advice - what PSU is needed, do I need to change some jumpers on control or power board or something?
I think you need a 1000 watt PSU with 4 modules (on the wiki it says 750 watt but in the confirmed working list a 1000 watt), it has one confirmed working on the list https://en.bitcoin.it/wiki/Avalon#Comfirmed_working_PSU_list but others may (or may not) work also in the webgui you have to select the number of modules, (maybe someone else can fill in, bitcoinfoundation has a 4 module unit, dont know what PSU they have tho, maybe the Enermax) Maybe better to have a bit too much power than too less. I have Corsair Professional Series Gold AX1200 PSU for Avalon, but can´t confirm yet it works as Im still waiting for Avalon Batch3 four mod unit.
|
|
|
|
Matthew N. Wright
Untrustworthy
Hero Member
Offline
Activity: 588
Merit: 500
Hero VIP ultra official trusted super staff puppet
|
|
April 22, 2013, 01:41:41 PM |
|
Wait, so the PSU everyone is getting with the 4 module units in Batch 3 won't be strong enough to power it? Why would they offer it then?
|
|
|
|
xiangfu
|
|
April 22, 2013, 03:17:06 PM |
|
Hi spiccioli Add other cgminer options (like --fix-protocol) to /etc/init.d/cgminer is right. I plan to add [Cgminer options] to the web page in next firmware. then we can add the 4th pool or 5th pool at [Cgminer options]. Xiangfu Hi xiangfu,
I've just updated my units, but I still cannot mine on p2pool without using --fix-protocol which has to be added by hand to /etc/init.d/cgminer
Is this the way it is supposed to be? Shouldn't p2pool mining be working with stratum when using latest cgminer?
spiccioli
|
|
|
|
rudrigorc2
Legendary
Offline
Activity: 1064
Merit: 1000
|
|
April 22, 2013, 04:04:57 PM |
|
Wait, so the PSU everyone is getting with the 4 module units in Batch 3 won't be strong enough to power it? Why would they offer it then?
Looks like this guy missed the option: order without PSU. Well spent money though. Edit: If not happy, you can ship the extra module to me in China - I give you BTC after I get it in safe condition, or we can arrange a meeting in Korea next month.
|
|
|
|
Matthew N. Wright
Untrustworthy
Hero Member
Offline
Activity: 588
Merit: 500
Hero VIP ultra official trusted super staff puppet
|
|
April 22, 2013, 04:08:10 PM |
|
Wait, so the PSU everyone is getting with the 4 module units in Batch 3 won't be strong enough to power it? Why would they offer it then?
Looks like this guy missed the option: order without PSU. Well spent money though. Edit: If not happy, you can ship the extra module to me in China - I give you BTC after I get it in safe condition, or we can arrange a meeting in Korea next month. I saw the option and ordered with PSU. The question is, why would that PSU not be sufficient?
|
|
|
|
spiccioli
Legendary
Offline
Activity: 1379
Merit: 1003
nec sine labore
|
|
April 22, 2013, 04:28:28 PM |
|
Hi spiccioli Add other cgminer options (like --fix-protocol) to /etc/init.d/cgminer is right. I plan to add [Cgminer options] to the web page in next firmware. then we can add the 4th pool or 5th pool at [Cgminer options]. Xiangfu Hi xiangfu,
I've just updated my units, but I still cannot mine on p2pool without using --fix-protocol which has to be added by hand to /etc/init.d/cgminer
Is this the way it is supposed to be? Shouldn't p2pool mining be working with stratum when using latest cgminer?
spiccioli
xiangfu, thanks for confirming, but what's stopping cgminer inside avalon from using stratum with p2pool? I have several cairnsmore boards mining on p2pool with stratum with cgminer 2.10.5, so a much older version than the one inside latest avalon firmware. is this a problem of p2pool code or one of the version of cgminer inside avalon? spiccioli
|
|
|
|
-ck
Legendary
Offline
Activity: 4270
Merit: 1645
Ruu \o/
|
|
April 23, 2013, 06:21:12 AM |
|
thanks for confirming, but what's stopping cgminer inside avalon from using stratum with p2pool?
I have several cairnsmore boards mining on p2pool with stratum with cgminer 2.10.5, so a much older version than the one inside latest avalon firmware.
is this a problem of p2pool code or one of the version of cgminer inside avalon?
p2pool's stratum code. The version of cgminer inside avalon in the latest firmware is up to date now.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
spiccioli
Legendary
Offline
Activity: 1379
Merit: 1003
nec sine labore
|
|
April 23, 2013, 06:38:50 AM |
|
thanks for confirming, but what's stopping cgminer inside avalon from using stratum with p2pool?
I have several cairnsmore boards mining on p2pool with stratum with cgminer 2.10.5, so a much older version than the one inside latest avalon firmware.
is this a problem of p2pool code or one of the version of cgminer inside avalon?
p2pool's stratum code. The version of cgminer inside avalon in the latest firmware is up to date now. ckolivas, cgminer version 2.10.5 - Started: [2013-04-16 18:47:59] -------------------------------------------------------------------------------- (5s):9.689G (avg):8.102Gh/s | Q:60162 A:121115 R:4026 HW:20697 E:201% U:12.8/m ST: 1 SS: 0 DW: 118727 NB: 1033 LW: 2755582 GF: 1 RF: 0 WU: 107.3 Connected to 192.168.1.101 diff 8 with stratum as user 1..................+8 Block: 01d6fe988ef5c26c... Diff:8.97M Started: [08:12:46] Best share: 3.54M -------------------------------------------------------------------------------- [P]ool management [S]ettings [D]isplay options [Q]uit ICA 0: | 401.0M/403.8Mh/s | A:5916 R:207 HW:1076 U:0.63/m ICA 1: | 404.3M/403.7Mh/s | A:6143 R:209 HW: 893 U:0.65/m ICA 2: | 392.4M/403.6Mh/s | A:6041 R:195 HW: 895 U:0.64/m ICA 3: | 390.6M/398.7Mh/s | A:5717 R:184 HW: 837 U:0.60/m ICA 4: | 397.4M/403.6Mh/s | A:5940 R:205 HW:1459 U:0.63/m ICA 5: | 401.7M/403.7Mh/s | A:6081 R:200 HW: 894 U:0.64/m ICA 6: | 398.2M/403.8Mh/s | A:5942 R:187 HW:1397 U:0.63/m ICA 7: | 381.9M/398.6Mh/s | A:5683 R:184 HW: 860 U:0.60/m ICA 8: | 412.2M/415.5Mh/s | A:6599 R:203 HW: 985 U:0.70/m ICA 9: | 402.7M/409.3Mh/s | A:6371 R:224 HW: 897 U:0.67/m ICA 10: | 393.2M/403.7Mh/s | A:5911 R:192 HW:1176 U:0.62/m ICA 11: | 397.4M/403.7Mh/s | A:5956 R:196 HW: 874 U:0.63/m ICA 12: | 405.0M/403.8Mh/s | A:6024 R:199 HW: 932 U:0.64/m ICA 13: | 390.6M/403.8Mh/s | A:5874 R:188 HW:1163 U:0.62/m ICA 14: | 405.3M/403.9Mh/s | A:6056 R:220 HW: 954 U:0.64/m ICA 15: | 398.5M/403.8Mh/s | A:5954 R:199 HW:1092 U:0.63/m ICA 16: | 410.1M/415.5Mh/s | A:6560 R:231 HW: 970 U:0.69/m ICA 17: | 407.2M/412.3Mh/s | A:6422 R:200 HW:1118 U:0.68/m ICA 18: | 391.1M/403.6Mh/s | A:6016 R:205 HW:1334 U:0.64/m ICA 19: | 401.9M/403.6Mh/s | A:5909 R:198 HW: 891 U:0.62/m --------------------------------------------------------------------------------
[2013-04-23 08:29:26] Accepted 1ee2cc0a Diff 8/8 ICA 11 pool 1 [2013-04-23 08:29:30] Stratum from pool 1 requested work restart [2013-04-23 08:29:36] Stratum from pool 1 requested work restart [2013-04-23 08:29:42] Accepted 09bca090 Diff 26/8 ICA 10 pool 1 [2013-04-23 08:29:42] Accepted 0d83270f Diff 18/8 ICA 15 pool 1 [2013-04-23 08:29:44] Stratum from pool 1 requested work restart [2013-04-23 08:29:54] Accepted 1f999388 Diff 8/8 ICA 7 pool 1 [2013-04-23 08:29:56] Accepted 1ed3fab7 Diff 8/8 ICA 13 pool 1
here you can see 10 cairnsmore1 mining on p2pool with stratum and all is running fine. cgminer is also older than the one on latest avalon firmware. But if I point my Avalon to my p2pool without adding --fix-protocol I only get invalids. How can it be? spiccioli
|
|
|
|
-ck
Legendary
Offline
Activity: 4270
Merit: 1645
Ruu \o/
|
|
April 23, 2013, 06:47:46 AM |
|
thanks for confirming, but what's stopping cgminer inside avalon from using stratum with p2pool?
I have several cairnsmore boards mining on p2pool with stratum with cgminer 2.10.5, so a much older version than the one inside latest avalon firmware.
is this a problem of p2pool code or one of the version of cgminer inside avalon?
p2pool's stratum code. The version of cgminer inside avalon in the latest firmware is up to date now. ckolivas, cgminer is also older than the one on latest avalon firmware. But if I point my Avalon to my p2pool without adding --fix-protocol I only get invalids. How can it be? I heard you the first time. Dunno, but the rest of the pools get it right yet it makes the avalon spit out heaps of dupes. I don't understand python so I wasn't about to go poking into the p2pool code. If/when I have more time on the avalons I can investigate further to see what p2pool is spitting out that it doesn't like, but for now, the code used by the cgminer on avalons is the same as the current cgminer code and not a single pool has a problem with them. I have some vague ideas but nothing conclusive... and have other tasks taking priority for obvious reasons.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
|
April 23, 2013, 10:46:04 AM |
|
nearly every day Avalon stops for a long time; - if I can see something I see Socket connect failed: Connection refused [Firmware Version] => 20130419 cgminer-8e8313c luci-28b4ff2 cgminer-openwrt-packages-f2bc5dc [USB-Serial] => /dev/ttyUSB0
where to look for the issue? TIA
|
|
|
|
server
Legendary
Offline
Activity: 892
Merit: 1002
1 BTC =1 BTC
|
|
April 23, 2013, 10:56:34 AM Last edit: April 23, 2013, 12:55:58 PM by server |
|
I had the same issue. Today for the first time. Reflashed it to the previous firmware 20130410 and now it's hashing again. Unit struggled before it went down.
|
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
|
April 23, 2013, 11:23:40 AM |
|
notable is that no restart or stop/start of cgminer aided and today a cold reboot of Avalon neither... only a cold reboot of Avalon AND the router (TL-MR3420 with latest firmware)
|
|
|
|
server
Legendary
Offline
Activity: 892
Merit: 1002
1 BTC =1 BTC
|
|
April 23, 2013, 03:20:01 PM Last edit: April 28, 2013, 11:45:03 AM by server |
|
I'm running smooth and steady after changing router & isp/uplink-provider. Cgminer NMW (no_matching_work) was high too so I think there was something wrong with the connection. But back on track again
|
|
|
|
server
Legendary
Offline
Activity: 892
Merit: 1002
1 BTC =1 BTC
|
|
April 23, 2013, 03:28:26 PM |
|
nearly every day Avalon stops for a long time; - if I can see something I see Socket connect failed: Connection refused [Firmware Version] => 20130419 cgminer-8e8313c luci-28b4ff2 cgminer-openwrt-packages-f2bc5dc [USB-Serial] => /dev/ttyUSB0
where to look for the issue? TIA You can try what I did, check your connection to the pool or try another pool. Maybe pull the plug from your router for 10 seconds ? Also I changed from wired to wifi and I flashed back to 20130410. I think my unit did not perform well because of a bad connection, either on my side or the pool's side.
|
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
|
April 23, 2013, 04:14:25 PM |
|
You can try what I did, check your connection to the pool or try another pool. Maybe pull the plug from your router for 10 seconds ? Also I changed from wired to wifi and I flashed back to 20130410. I think my unit did not perform well because of a bad connection, either on my side or the pool's side.
I am on more then one pool and at all was the same (with Avalon; - 1 GPU stays connected) as you correctly said, I have had to cold reboot the router too (connected with wifi)...
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
April 23, 2013, 05:20:24 PM |
|
What was the link to that surge suppressor that was web enabled where you can power cycle it remotely?
|
|
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
|
April 23, 2013, 06:51:57 PM |
|
|
|
|
|
|