Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Marvell2]

phoneix has lower fees so even with stales its a wash imo

Yes, you are correct.
I forgot to put in the fees with Claymore at 1% and Phoenix at .65%
Just about evens out on that front.

Ummm, 2% stale vs 4-8% stale? So 0.35% fee is worth losing 4% on stales? at that point just use ethminer....

on my nvidia rig after 24 hours stales repoted by phoniex is 1.2

Is that number from the pool or the display in the miner window ?

Edit:
Never mind I see you said it was reported by Phoenix.
Here is the truth about that number.
It is totally worthless. The miner has almost no idea if a share was stale at the pool.
Phoenix even states that if you read all the post's from them about that number.
Trouble is, few actually read more than one page back in a thread.

They rarely mention it because they don't want everyone to know or remember that little fact.
So, everyone sees that and accepts it is the actual stale share rate. I've brought that up to them on
multiple occasions.

In the miner window this is how that message should read:

The stale share number about to be displayed is fictional and is presented for entertainment purposes only.
Your actual stale share rate can only be know at the pool, not in the miner.
Please ignore the above message an tell everyone that this is my stale share rate.

https://www.ethermine.org/miners/a57EeFabb76Bfd1E9E6ee606999b76BD123aFe32/worker/marvell9-117

it says 3% at the pool so yeah the miner lies, I just upgraded to the new phonenix , seema i was on 2.7c
ill check stales in 24 hrs

[1714184577]

1714184577

[1714184577]

1714184577

[1714184577]

1714184577

[1714184577]

1714184577

[nitrobg]

phoneix has lower fees so even with stales its a wash imo

Yes, you are correct.
I forgot to put in the fees with Claymore at 1% and Phoenix at .65%
Just about evens out on that front.

Ummm, 2% stale vs 4-8% stale? So 0.35% fee is worth losing 4% on stales? at that point just use ethminer....

Stales mostly depend on the pool's luck. Try running them side by side on similar machines for 24-48h, and then check the stales.

[YaStaer]

new versions crash at the stage of card definition NVIDIA in Windows 7, if there are more than 6 cards in the rig. The latest version that works with 6+ cards is 11.0.

Claymore log:

Code:

09:54:05:318	b94	
09:54:05:318	b94	ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
09:54:05:319	b94	є                Claymore's Dual GPU Miner - v11.6               є
09:54:05:319	b94	є              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             є
09:54:05:320	b94	ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
09:54:05:320	b94	
09:54:05:320	b94	b571 
09:54:05:521	b94	You enabled full remote management, but did not specify -mpsw option to protect it by password, please do it, otherwise you can be attacked if you share remote management port to internet! Or use negative -mport value to enable read-only remote management mode, see Readme for details.
09:54:10:521	b94	ETH: 1 pool is specified
09:54:10:522	b94	Main Ethereum pool is eu1.ethermine.org:4444
09:54:10:522	b94	B2S: 1 pool is specified
09:54:10:523	b94	Main Blake2s pool is xvg.eu1.unimining.net:5770
09:54:10:685	b94	OpenCL platform: Intel(R) OpenCL
09:54:10:685	b94	OpenCL platform: NVIDIA CUDA
09:54:10:686	b94	AMD OpenCL platform not found 
09:54:10:888	b94	CUDA initializing...

09:54:10:889	b94	NVIDIA Cards available: 7 
09:54:10:889	b94	CUDA Driver Version/Runtime Version: 9.1/9.1
09:54:10:930	b94	GPU #0: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1  (pci bus 1:0:0)

09:54:10:933	b94	GPU #1: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1  (pci bus 2:0:0)

09:54:10:938	b94	GPU #2: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1  (pci bus 3:0:0)

09:54:10:942	b94	GPU #3: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1  (pci bus 5:0:0)

09:54:10:946	b94	GPU #4: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1  (pci bus 6:0:0)

09:54:10:949	b94	GPU #5: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1  (pci bus 7:0:0)

Windows log:

Code:

- EventData 

   EthDcrMiner64.exe 
   0.0.0.0 
   5abe1013 
   ntdll.dll 
   6.1.7601.23915 
   59b94ee4 
   c0000005 
   000000000004b0a4 
   fb4 
   01d3c8bd0da3dc10 
   C:\Shara\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\EthDcrMiner64.exe 
   C:\Windows\SYSTEM32\ntdll.dll 
   50392d50-34b0-11e8-9250-38d547aacba9 

[wangusto]

hihi all

I have updates it to v11.6 but it says

eth stratum connected eth-eu nanopool.org:9999 (unsecure)

Whats with the unsecure part?

I have already read the readme file but i cant find the solution?

can you help me the noob guys

[gedeonodn]

Cпacибo зa тo, чтo пpиcлyшивaeтecь к пoльзoвaтeлям (tnx for your accept customer requests)!!!

[leonix007]

hihi all

I have updates it to v11.6 but it says

eth stratum connected eth-eu nanopool.org:9999 (unsecure)

Whats with the unsecure part?

I have already read the readme file but i cant find the solution?

can you help me the noob guys

its a connection between your miner and the pool, if you want it more secured then use the SSL port

otherwise its a default connection where I also use it

[wangusto]

hihi all

I have updates it to v11.6 but it says

eth stratum connected eth-eu nanopool.org:9999 (unsecure)

Whats with the unsecure part?

I have already read the readme file but i cant find the solution?

can you help me the noob guys

its a connection between your miner and the pool, if you want it more secured then use the SSL port

otherwise its a default connection where I also use it

Is it safe to use it "unsecure"?

[Ambros]

Hi Guys! One of the mail killer fee of this miner is obviously the dual mining.

My farm is based on 1070 and 1050ti. I am currently dual mining XVG (blake2s). What are you guys doing?

Also, I will not disclose the name of the pool because it would be advertising,  but I am getting on average 50% of what calculators say I should get. Any similar experience or any pool that is acting in a more fair way?

[leonix007]

hihi all

I have updates it to v11.6 but it says

eth stratum connected eth-eu nanopool.org:9999 (unsecure)

Whats with the unsecure part?

I have already read the readme file but i cant find the solution?

can you help me the noob guys

its a connection between your miner and the pool, if you want it more secured then use the SSL port

otherwise its a default connection where I also use it

Is it safe to use it "unsecure"?

yeah, what I could do is to set some security of my PC and close some ports one example is -mport options

So far. no attempts made idk if its just a waste of time penetrating my rigs though 

[Munka9]

Hi Guys! One of the mail killer fee of this miner is obviously the dual mining.

My farm is based on 1070 and 1050ti. I am currently dual mining XVG (blake2s). What are you guys doing?

Also, I will not disclose the name of the pool because it would be advertising,  but I am getting on average 50% of what calculators say I should get. Any similar experience or any pool that is acting in a more fair way?

You are using unimining or ant mine pool. Switch to nlpool

[vapourminer]

With Windows 10 I always run this command in a .bat file before I start mining:
taskkill /IM /F ApplicationFrameHost.exe

It gets back a little vram from windows.

nice find, but it seems there may be more you have to do.

NOTE: need to run this batch in admin mode

taskkill /im ApplicationFrameHost.exe /f
taskkill /im ShellExperienceHost.exe /f
taskkill /IM dwm.exe /F

maybe run it in a loop or something or run as a scheduled task every so often as win10 seems to sneak back that vram usage after a time.

from this article.
https://forums.guru3d.com/threads/windows-10-simple-batch-bat-file-to-free-vram.402022/

EDIT have not tried this, my cards are 4gb or above.

[vapourminer]

Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
=========================

Latest version is v11.6:

But where is the Claymore's CryptoNight AMD GPU Miner update???

why did you have to re-post a whole page of claymore's just to ask a question-that too not related to the dual ethereum miner ?
Can you please ensure you use the code window if you want to post long posts so that the whole page is not hogged
You can click on the # and insert your long post in between the "code" and "/code"

i just put people like this on ignore instantly. makes the forum much more enjoyable.

[tamerline]

version 11.4-11.6 doesn't work with 8 NVIDIA video cards in system win7.
just closes when the program starts...
how can you solve the problem?

[YaStaer]

version 11.4-11.6 doesn't work with 8 NVIDIA video cards in system win7.
just closes when the program starts...
how can you solve the problem?

I join the question. Here is my post

https://bitcointalk.org/index.php?topic=1433925.msg33578158#msg33578158

[tamerline]

version 11.4-11.6 doesn't work with 8 NVIDIA video cards in system win7.
just closes when the program starts...
how can you solve the problem?

I join the question. Here is my post

https://bitcointalk.org/index.php?topic=1433925.msg33578158#msg33578158

same problem (((
wait answer..

[janding]

Hi Guys! One of the mail killer fee of this miner is obviously the dual mining.

My farm is based on 1070 and 1050ti. I am currently dual mining XVG (blake2s). What are you guys doing?

Also, I will not disclose the name of the pool because it would be advertising,  but I am getting on average 50% of what calculators say I should get. Any similar experience or any pool that is acting in a more fair way?

Even if it was, I couldn't tell you what pool, it would be advertising.

[janding]

Can anyone explain what this setting does ?

From readme file.
-ethi -8192   "it exactly means "global work size"

I know how to use the -ethi with "normal positive number settings"
However, the -8192 setting shown in the documentation I don't know what the global work size means.

Anyone ever used it that way ?
Any benefits ?

[vtrsp1]

version 11.4-11.6 doesn't work with 8 NVIDIA video cards in system win7.
just closes when the program starts...
how can you solve the problem?

win7 is the bottleneck!!! uprade to win 10 or use Linux.

[wangusto]

hihi all

I have updates it to v11.6 but it says

eth stratum connected eth-eu nanopool.org:9999 (unsecure)

Whats with the unsecure part?

I have already read the readme file but i cant find the solution?

can you help me the noob guys

its a connection between your miner and the pool, if you want it more secured then use the SSL port

otherwise its a default connection where I also use it

Is it safe to use it "unsecure"?

yeah, what I could do is to set some security of my PC and close some ports one example is -mport options

So far. no attempts made idk if its just a waste of time penetrating my rigs though 

Haha okok but there is nobody who has a solution for the "unsecure" problem who can help me with this

[nlpoolscam]

hihi all

I have updates it to v11.6 but it says

eth stratum connected eth-eu nanopool.org:9999 (unsecure)

Whats with the unsecure part?

I have already read the readme file but i cant find the solution?

can you help me the noob guys

its a connection between your miner and the pool, if you want it more secured then use the SSL port

otherwise its a default connection where I also use it

Is it safe to use it "unsecure"?

yeah, what I could do is to set some security of my PC and close some ports one example is -mport options

So far. no attempts made idk if its just a waste of time penetrating my rigs though 

Haha okok but there is nobody who has a solution for the "unsecure" problem who can help me with this

Wtf? The solution is to use ssl pools. "Unsecured" text is just a graphical bling bling to promote users to use ssl pools so you cant cheat his miner, thats all.