PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[Marvell2]

If you are mining ethereum or its forks with gpus and have a github account you ahould flood this post
by the eth devs and asic shills discussing reducting block reward only, or forking Asics and reducing blook reward.
So far most of the support serms to be for Asics.  They are discussing all this in a meeting tomorrow so leave your imput as gpu miners.
 
https://github.com/ethereum/pm/issues/55

[1715170658]

1715170658

[1715170658]

1715170658

[1715170658]

1715170658

[1715170658]

1715170658

[1715170658]

1715170658

[john1010]

Glad to see that this miner continue to work for betterment, Almost 3mos now I stopped mining ethhash algo, so Im not updated about the development of this miner.. I used this once since the first release and see the difference against Claymore.. Hope that the ethhash coin will now recover and bring a decent profit to every miners. Good job to Dev!

[4play]

hi,

I have a problem, some times, on win7, the miner crash and I have a error message fron windows. if I just choose "yes", the miner restart by himself. Is it possible to not have the windows error and have the miner just restart by itself like claymore?

thx

try this https://www.lifewire.com/how-do-i-disable-error-reporting-in-windows-2626074

[Falconnn]

PhoenixMiner is awesome, but, please fix to work with app awesome miner http://www.awesomeminer.com/, cant see shares, rejected and errors, like claymore show.

THX

[Falconnn]

Hi, I just recently started using PhoenixMiner and I love it, its works stable on my miner with 8 GPUs. I have one question: is there a way to disable GPU temp and fan speed reporting by miner? its not needed and after a while of work miner starts reporting unknown error with random GPU fans every time before GPU temp and fan speed update and that eats up CPU (phoenixminer.exe goes to 100% cpu at that time) and as result slows mining a bit every 30sec..

same problem here on Nvidia rig 8 vga, was trying with lower OC, same problem same 3 cards(1,3,7) v 3b and 3c, amd rig works fine all nine vga on 2.9c

my settings now, will try:  -tt 4 cca 120 seconds
 -tt <n> Set fan control target temperature (special values: 0 - no HW monitoring on ALL cards,
     1-4 - only monitoring on all cards with 30-120 seconds interval, negative - fixed fan speed at n %)

[bgerto]

GTX 1080 MSI Gaming X

Memory +600
Core +100
Power 65
40.3 MH/s  Stable 21 Hours Already


https://i.imgur.com/4QQHGjZ.png


GTX 1070Ti EVGA Ultra Silent

Memory +700
Core +150
Power 60
32.4 MH/s  Stable 21 Hours Already


https://i.imgur.com/BPp8gDh.png

[gsrcrxsi314]

last active July 17th.

Sad

[MaxMidnite]

RIP Miner, Claymore not online also, not sure whats going on..

[RaulCM]

Hello,

I have a rig with 1060 3GB and W10 and it gives me an error in the creation of the DAG due to lack of memory.

Is there any configuration of Phoenix to use all the memory of the cards?

[adi1972]

RIP Miner, Claymore not online also, not sure whats going on..

On vacation? He already accumulated lots eth from dev fee.  Maybe cashed out some just to be away from this crypto slum.

[sirkorro]

On vacation? He already accumulated lots eth from dev fee.  Maybe cashed out some just to be away from this crypto slum.

Enjoying his lambo.

[gsrcrxsi314]

Hello,

I have a rig with 1060 3GB and W10 and it gives me an error in the creation of the DAG due to lack of memory.

Is there any configuration of Phoenix to use all the memory of the cards?

3gb cards havent worked on W10 for months now. where have you been?

you need windows 7 or linux if you want to keep using 3gb cards. this has nothing to do with Phoenix

[Woodcarver]

No wonder the Devs are not updating their apps. PM is stable but, there's no profit in it and they know miners won't be using it much longer as the price decreases even more.  ETH price is now below cost of power even at $.08/Kw. I've shut all of my rigs down.  I'm not ready to sell them yet in hopes the price will come back up next year.

[PhoenixMiner]

We are back Sorry for the long delay since the last version. Happy to report that things are back go normal now.

The new version (or at least its beta) is finally ready, and it supports both Windows and Linux. You can download PhoenixMiner 3.5a from here:

(MEGA links are no longer active)

If you want to check the integrity of the downloaded file, please use the following hashes:

Code:

    File: PhoenixMiner_3.5a_Windows.zip
    ===================================
   SHA-1: 0417fb6925508386d96e461f6f242c281f128933
 SHA-256: 63562e9cbd22cf938378050d83fde8aa28ed9c661d95b8b825aa48680e27587b
 SHA-512: ce8472c8e9c68bfffc96c88d5b9ab1dc7f80dfd7158e8b89185eb6f0b9fc3ef3532a9352fa90d261b241f44d074075d70ee548a35113dc60c381ee4a6a24bd40
 
 
    File: PhoenixMiner_3.5a_Linux.tar.gz
    ====================================
   SHA-1: b537d86cbc9aba4f30862db958c25837f2649130
 SHA-256: 6f94c4fb49cfe44ddc8a61b4774792c97782dbc4f3252e08ab793514316af5cb
 SHA-512: a6ab24962836fd482d197f4aea82cf1cb5dc048f9a1d8693787bc3de13a776c9b1d27c1423400aa0017095a9ff7ecb628f8c64b5d8120c1a904d99aee6c73957

Here are the changes since the last release:

* Support for Linux (tested on Ubuntu 16.04 LTS and Debian 9.5 stable). Note that we have tested with AMD GPU-Pro drivers (not the open source drivers) and the official Nvidia closed-source drivers. Please note that this is the first version that supports Linux, so some glitches are to be expected. Do not hesitate to write us about any problems.
* With the recent drop in prices of most cryptos, we are trying to come up with ways to increase the profitability. Since the cost of the electric power a major factor now, we worked hard to create new, power-efficient kernels for most widely used AMD cards (RX580/570/560/480/470/460). To use these kernels, you must specify the option -clgreen 1 on the command-line, or in the config.txt file. In our tests the green kernels lower the power consumption by 2-3% on the supported cards. These kernels may also slightly lower the hashrate (by 0.2-0.5%), so you have to check if they are more efficient for you depending on the electricity costs in your area.
* Small improvements in the normal AMD kernels to increase hashrate (RX4xx, RX5xx, Tonga, and Fury)
* Added advanced stats option (you have to turn this on with the command-line option -astats 1) that will try to estimate the daily earnings depending on the current price of the coin you are mining and the current difficulty. Note that this is only an estimation and it uses information from third-party web sites, which may not be accurate.
* Added support for direct mining of DubaiCoin (DBIX)
* Added -leaveoc option to prevent resetting of the HW OC settings to defaults on exit
* Many small fixes

[crypper]

No wonder the Devs are not updating their apps. PM is stable but, there's no profit in it and they know miners won't be using it much longer as the price decreases even more.  ETH price is now below cost of power even at $.08/Kw. I've shut all of my rigs down.  I'm not ready to sell them yet in hopes the price will come back up next year.

Lol... you do not understand how it works. No matter what the price of ether is and how many people mine - dev's income (in ether) will not be affected.  In dollars they will get less, but there is no way they can lose money, right? (unlike you and me as we have to pay for electricity).
Consider this: less people mine=> lower difficulty, but block reward doesn't change. Even if there is only one miner left (let's call him Vitalik ), and he is mining with phoenix, phoenix will still get his 0.09*5 Ether every 15 minutes. Or if there are 10,000 people mining, still  0.09*5 Ether every 15 minutes.

[PhoenixMiner]

The first beta of PhoenixMiner 3.5b is out: https://bitcointalk.org/index.php?topic=2647654.msg45385531#msg45385531. Improvements include Linux support (finally), and power-efficient kernels for some AMD cards.

Lol... you do not understand how it works. No matter what the price of ether is and how many people mine - dev's income (in ether) will not be affected.  In dollars they will get less, but there is no way they can lose money, right? (unlike you and me as we have to pay for electricity).
Consider this: less people mine=> lower difficulty, but block reward doesn't change. Even if there is only one miner left (let's call him Vitalik ), and he is mining with phoenix, phoenix will still get his 0.09*5 Ether every 15 minutes. Or if there are 10,000 people mining, still  0.09*5 Ether every 15 minutes.

Respectfully, this is a load of BS. First, we get 0.65%, which is 0.0065 for mathematically challenged, not 0.09 (i.e. about 14 times less). Second, the block reward is 3 eth, soon to become less. Third, not everyone mines with PhoenixMiner (we wish, but the reality is quite different). But most importantly - the value of income in ETH is meaningless if the ETH price is too small. After all we can't pay our bills with ETH, can we? So, we are in the same boat with everyone as the profits are concerned.

We firmly believe in the future of ETH (and in cryptocurrency in general), and while these are trying times, so far every time after such dip, there was even higher peak. We keep most of our savings in ETH, and other cryptos, so we definitely put our money where our mouths are.

[Megi Ainul Y]

to the advatage of the config.txt and epools.txt  files is that if we set or set the rig via a remote control we can chage the pool and even the miner options

[borox]

  v3.5a detects all devices but then ends with error

Code:

Phoenix Miner 3.5a Windows/msvc - Release build
-----------------------------------------------

Available GPUs for mining:
GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU3: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU4: GeForce GTX 1070 (pcie 7), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU5: GeForce GTX 1070 (pcie 8), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU6: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
FATAL ERROR: Debugger detected

[KiparisD]

  v3.5a detects all devices but then ends with error

Code:

Phoenix Miner 3.5a Windows/msvc - Release build
-----------------------------------------------

Available GPUs for mining:
GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU3: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU4: GeForce GTX 1070 (pcie 7), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU5: GeForce GTX 1070 (pcie 8), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU6: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
FATAL ERROR: Debugger detected

Send me your 1070s i will fix it  
Check that bad boy, if it greyed out, then clean reinstall drivers  

[borox]

Check that bad boy, if it greyed out, then clean reinstall drivers

I can't  my display output is through an intel gpu, so nvidia panel exits with error.
Oh, Phoenix 3.0c mines without problems on this rig.

Better I wait for 3.5c 

borox