Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment

[mcheung83]

New image for TL-MR3020 + cgminer 3.12.3 patch 0.2.0 Milestone release

how does it run? is it stable?

edit: just flashed XD

So ? I guess it is

still running :p

[1713870227]

1713870227

[loshia]

New image for TL-MR3020 + cgminer 3.12.3 patch 0.2.0 Milestone release

how does it run? is it stable?

edit: just flashed XD

So ? I guess it is

still running :p

and it will

[Zich]

New image for TL-MR3020 + cgminer 3.12.3 patch 0.2.0 Milestone release

how does it run? is it stable?

edit: just flashed XD

So ? I guess it is

still running :p

and it will

Of course it's still running unless blackout happen  

Just flash new image actually  

[Adamlm]

marto74, please complete my order IOEKQNSIS. I've paid for hosting and setup too. You told me it would be ready in previous week...     

Sorry for the delay.
You'll get your hosting setup tommorow

My miner is still not ready... 
Please, can you finally set up it ? It's an order from December.

[dplusf]

Order from November still nothing.

I can only recommend to anybody do not order from technobit. just dont do it. i ve ordered on nov. 26th last year. till today there was one response a month ago that bitfury have a delay with the chips. we have now february 2014. i have send them various messages, was asking kind and politely about order status. you know what?

you can put those usb sticks in your a.s marto.


EDIT: youth protection

[cannachris]

this is what my internet banking shows but i think you need another code right? so should I call my bank on monday or is this enough info?

[edit] i already sent you this by email (the blacked out number that is my creditcard number for the charging of my monthly creditcard fee has nothing to do with this order) i paid from my normal bank account my account number which is NL89RABO0368044971

the swift code is on there its  BG79 SOMB 9130 1055 2695 01 unless you mean a different type of swift code???

Oh btw i took the fan off the broken miner to test it see if anything was wrong with it but its the miner (when i first found out it was broken) and now I can't find it (too much hardware in small room) is it ok if I ship it back to you without the fan?? Thx for taking the return. I understand how busy you guys must be.

OK I went to my bank and asked them to give me all possible information about the swift transaction. this is what they gave me:





This is everything the bank has on the 581€ transaction for order BJJNEKBIM

[mjniessen]

My 24 GH/s HEX16A2 fully Assembled bitcoin miner (chips included) (Order No. CVMKAARFU) is not making half the hash rate, which should be reached (over clocked). What went wrong?

HEXc 0: 1500 1100/1103mV | 11.00G/11.17Gh/s | A:1120 R:0 HW:21/2.05% WU:156.0/m

[loshia]

My 24 GH/s HEX16A2 fully Assembled bitcoin miner (chips included) (Order No. CVMKAARFU) is not making half the hash rate, which should be reached (over clocked). What went wrong?

HEXc 0: 1500 1100/1103mV | 11.00G/11.17Gh/s | A:1120 R:0 HW:21/2.05% WU:156.0/m

Chimner-API stats small letters only?

[mjniessen]

I've no cgminer-API extra, but it seems that only one row is active. After restarting cgminer (with --api-listen) is showing me

HEXc 0: 1500 1100/1100mV | OFF   / 0.000h/s | A:  0 R:0 HW:0/0.00% WU:  0.0/m
HEXc 1: 1500 1100/1103mV | 10.64G/9.760Gh/s | A:448 R:0 HW:8/1.99% WU:136.4/m

I'm starting with --hexminerc-options 16:1500 --hexminerc-voltage 1100 --set_default_to_c --api-listen do I need to add something to activate the second HEXc?

Edit: The secondary HEXc disappeared again... :-(
Edit^2: fixed frequency in command-line

[seaandy]

Martin you fucking scammer ,

what about my order QNNEYUNAT  , you receive my payment of about 2112€ early December and till yet no Delivery,

I want my money refund you scammer , you are stolen my money

I send you my paypal account by PM and of course no Answer - by your fucking company normally situation

I know you see this forum many time a day and I promise you I make your business and company as a scammer and fucking person and you can't make any business in this Forum - you are persona non grata

Give me my money you fucking scammer

[Zich]

I've no cgminer-API extra, but it seems that only one row is active. After restarting cgminer (with --api-listen) is showing me

HEXc 0: 1500 1100/1100mV | OFF   / 0.000h/s | A:  0 R:0 HW:0/0.00% WU:  0.0/m
HEXc 1: 1500 1100/1103mV | 10.64G/9.760Gh/s | A:448 R:0 HW:8/1.99% WU:136.4/m

I'm starting with --hexminerc-options 16:1000 --hexminerc-voltage 1100 --set_default_to_c --api-listen do I need to add something to activate the second HEXc?

Edit: The secondary HEXc disappeared again... :-(

Hi,

I see that you set a little low frequency while run command:

Code:

--hexminerc-options 16:1000

The right command is:

Code:

--hexminerc-options 16:1500

Though i find it weird that your cgminer show frequency set at 1500 

[mjniessen]

Hi,

I see that you set a little low frequency while run command:

Code:

--hexminerc-options 16:1000

The right command is:

Code:

--hexminerc-options 16:1500

Though i find it weird that your cgminer show frequency set at 1500 

Ups... that was my fault. I checked, what happened on a lower frequency and a lower voltage.

[Zich]

Hi,

I see that you set a little low frequency while run command:

Code:

--hexminerc-options 16:1000

The right command is:

Code:

--hexminerc-options 16:1500

Though i find it weird that your cgminer show frequency set at 1500  

Ups... that was my fault. I checked, what happened on a lower frequency and a lower voltage.

The chip will hash at slower speed or not hash at all if too low or too high.
Sometimes i accidentally  set the frequency to 150   after flash new image to TL-MR3020

[mjniessen]

The chip will hash at slower speed or not hash at all if too low or too high.
Sometimes i accidentally  set the frequency to 150   after flash new image to TL-MR3020

I know... but with --hexminerc-options 16:1500 the hash rate is still too low (~10GH/s)!

How should the chips be labeled? Perhaps I got the right Board (dmesg says so) with the wrong chips...

[loshia]

The chip will hash at slower speed or not hash at all if too low or too high.
Sometimes i accidentally  set the frequency to 150   after flash new image to TL-MR3020

I know... but with --hexminerc-options 16:1500 the hash rate is still too low (~10GH/s)!

How should the chips be labeled? Perhaps I got the right Board (dmesg says so) with the wrong chips...

dude,
check cgminer-api and post the output...

[Zich]

The chip will hash at slower speed or not hash at all if too low or too high.
Sometimes i accidentally  set the frequency to 150   after flash new image to TL-MR3020

I know... but with --hexminerc-options 16:1500 the hash rate is still too low (~10GH/s)!

How should the chips be labeled? Perhaps I got the right Board (dmesg says so) with the wrong chips...

That not possible. What is your PSU & how many board connected to the PSU?

[mjniessen]

That not possible. What is your PSU & how many board connected to the PSU?
[/quote]

My PSU is a "be quiet! Pure Power L8 350W". It supports up to 15 amps on +5V and 27 amps on +12V - which should be more than enough for one board only. I'm not using a TP-Link with a ready-made image, so I have to figure out what exactly "cgminer-api" is generating to post a similar output. The cgminer-3.11.0 has been patched and compiled by myself - according to other "success stories" on the net.

[loshia]

That not possible. What is your PSU & how many board connected to the PSU?

My PSU is a "be quiet! Pure Power L8 350W". It supports up to 15 amps on +5V and 27 amps on +12V - which should be more than enough for one board only. I'm not using a TP-Link with a ready-made image, so I have to figure out what exactly "cgminer-api" is generating to post a similar output. The cgminer-3.11.0 has been patched and compiled by myself - according to other "success stories" on the net.
[/quote]
just click next tab to cgminer-configuration in the web  and post the output

[stiffla]

Hi guys,

I had 3 HEX16A2 boards and gave them to a friend of mine.
Now a have a spare be quiet! BQT E9 Straight Power 700W PSU and I was wondering if anyone could need it.
Cheaper than a new one of course, I bought it on december 23rd.

[mjniessen]

My 24 GH/s HEX16A2 fully Assembled bitcoin miner (chips included) (Order No. CVMKAARFU) is not making half the hash rate, which should be reached (over clocked). What went wrong?

HEXc 0: 1500 1100/1103mV | 11.00G/11.17Gh/s | A:1120 R:0 HW:21/2.05% WU:156.0/m

With HexMiner 1.0.0.3 and this settings I also got a hash rate of a well over clocked 7 GH/s HEX16A miner... (avg ~8.78 Gh/s) That's extremely disappointing!
All 16 chips get warm/hot and seem to be soldered well, the PSU is okay and I'm not using any router hardware with a web interface or any helpful "cgminer-api".

Are there any schematics available? Does anyone have another idea or (much better) a solution for my issue?