lolMiner 1.64: Fastest Kaspa miner in market

[jgonzi]

Hello all,

    I am a newbie for mining ETH.  I have 2 AMD cards and use lolMiner 1.18a.  One is RX470, another one is RX570.
When I began mining ETH.  I found my two cards Hashing rate were 22H/s, 24H/s respectively.

1) What I can do on my cards modding up to 30H/s like other people?
Moreover, I found the temperature around 74C degree even they were at lower hashing rate.

2) Would I need to lower the core voltage in order to get cooler temperature?

Thank you for your helps!

1) 4GB -- normal hashrate 19 - 20 MH/s
    8GB -- 29 - 31 MH/s

2) start with 900 mV and then try to go lower (some of my rigs can handle 868 mV, some are at 881 mV)

Thank you catfish78 helps!
I just modded two cards bios successfully!

Now, I faced problem when handling MSI Afterburner!
Because I have two brand name cards, one is MSI, another one is Sapphire.
How can AfterBurner handle two different AMD cards?
I set Sapphire RX570 with lower core voltage and Higher Mhz Memory in Profile 1
and I set MSI RX470 with normal core voltage and not High Mhz Memory in Profile 2

Now, run lolminer, AfterBurner mess up their Profiles and freeze my win10.
Moreover, I realized that it is needed to restart lolminer whenever tweak Mhz or mV.
How can I use AfterBurner handle two different brand name cards' settings?
 

You can both in Profile 1, and Profile 2 for Gaming... You should choose another skin of the MSI that will help you... With another skin you will be able to see all cards that are in the system. ... You can also use the Adrenaline Driver and modify them there the profile is another option... 

Thank you for jgonzi's valuable advice!  Now, I can use Profile1 & Profile2 to control my two AMD cards!
Moreover, it is strange that the recent AMD driver 20.12.1recognize only one card(RX470/RX570) at any time.  Hard to set both cards to compute mode!
Luckily, MSI AfterBurner and Lolminer can recognize two cards at any time.  So, it is workable for mining now!

You are welcome. Enjoy Mining!! 

[1715068734]

1715068734

[1715068734]

1715068734

[1715068734]

1715068734

[jgonzi]

Running 1.19 for 2 days with no issues on SMOS. From a previous version the RX 4Gb cards hashrate has increased by 10% : 19-20Mh currently. Good job!

Nice hash it is nearly 3-4Mhs more than other miners... great job!!

[mitak64]

[miner29]

Running 1.19 for 2 days with no issues on SMOS. From a previous version the RX 4Gb cards hashrate has increased by 10% : 19-20Mh currently. Good job!

Nice hash it is nearly 3-4Mhs more than other miners... great job!!

Had to read that a couple of times...kept reading Nicehash 🤣

[ivomm]

91W for 570?!? Mine are at 70W in SMOS. 850mv for the core is standard. I guess I could reach 23 Mh too for some cards, but it is too much hassle. I set for all my cards daglim to 4074, because some cards crash and each time my rig reboots, it takes too much time to adjust the cards for 4076 or 4078.

[sergey837]

Hello everyone. How do I limit the power of a video card? In the settings of the video card, do not offer to change. How to change in the miner settings.

[mitak64]

91W for 570?!? Mine are at 70W in SMOS. 850mv for the core is standard. I guess I could reach 23 Mh too for some cards, but it is too much hassle. I set for all my cards daglim to 4074, because some cards crash and each time my rig reboots, it takes too much time to adjust the cards for 4076 or 4078.

These numbers are irrelevant. One can only trust a watt-meter at the wall !

[jgonzi]

Hello everyone. How do I limit the power of a video card? In the settings of the video card, do not offer to change. How to change in the miner settings.

If you are in Windows you can use 3rd Party Apps like MSI Afterburner... that will limit without problem

[sergey837]

Hello everyone. How do I limit the power of a video card? In the settings of the video card, do not offer to change. How to change in the miner settings.

If you are in Windows you can use 3rd Party Apps like MSI Afterburner... that will limit without problem

I do not want to limit the entire core frequency. I want to limit only for the miner

[ivomm]

91W for 570?!? Mine are at 70W in SMOS. 850mv for the core is standard. I guess I could reach 23 Mh too for some cards, but it is too much hassle. I set for all my cards daglim to 4074, because some cards crash and each time my rig reboots, it takes too much time to adjust the cards for 4076 or 4078.

These numbers are irrelevant. One can only trust a watt-meter at the wall !

The numbers are quite relevant my fellow miner! The difference from the wall will still be 20W, if it exists for SMOS for 2 cards! There are 40-44W which are not counted by smos and hiveos, these are the watts for the risers and pci-e slots.  The total consumption from the wall for my cards is 110-114W, while yours will be 130-134W.

[jgonzi]

91W for 570?!? Mine are at 70W in SMOS. 850mv for the core is standard. I guess I could reach 23 Mh too for some cards, but it is too much hassle. I set for all my cards daglim to 4074, because some cards crash and each time my rig reboots, it takes too much time to adjust the cards for 4076 or 4078.

These numbers are irrelevant. One can only trust a watt-meter at the wall !

The numbers are quite relevant my fellow miner! The difference from the wall will still be 20W, if it exists for SMOS for 2 cards! There are 40-44W which are not counted by smos and hiveos, these are the watts for the risers and pci-e slots.  The total consumption from the wall for my cards is 110-114W, while yours will be 130-134W.

You have to take the efficiency of the PSU ... is not the same 80Plus Silver than a Titanium. Also the temp of the enviroment...  a good PSU can really reduce the Watts at the wall

[jgonzi]

How many people are using the -tstop and - tstart parameters?.

I found it really useful for rig protection.

[gathermind]

As a newbie, may I ask a question?
I know a share means Prove of Work.
When Eth difficulty increases, it would be less amount of Eth giving to us even though Lolminer finds the same shares, right?

[jgonzi]

As a newbie, may I ask a question?
I know a share means Prove of Work.
When Eth difficulty increases, it would be less amount of Eth giving to us even though Lolminer finds the same shares, right?

When ETH diff increase that means that there is more hashreate in the Network. It does to autoregulate that the block are always found with a certain seconds.... near 13s.

That means that with more hashrate you have less part of the cake... when diff decrease more part... But there are also the Fee, if the diff of the network increase but also the fees (what people pay for transfer) then you are still having less part of the cake, but the cake is bigger... so you have more.

Normally the Fees increase with some big movements of transactions... that make the network to get full and you need to pay more to have an instant transfer.

More or less that's the idea... I hope it was helpfull

[gathermind]

As a newbie, may I ask a question?
I know a share means Prove of Work.
When Eth difficulty increases, it would be less amount of Eth giving to us even though Lolminer finds the same shares, right?

When ETH diff increase that means that there is more hashreate in the Network. It does to autoregulate that the block are always found with a certain seconds.... near 13s.

That means that with more hashrate you have less part of the cake... when diff decrease more part... But there are also the Fee, if the diff of the network increase but also the fees (what people pay for transfer) then you are still having less part of the cake, but the cake is bigger... so you have more.

Normally the Fees increase with some big movements of transactions... that make the network to get full and you need to pay more to have an instant transfer.

More or less that's the idea... I hope it was helpfull

Thanks jgonzi, you teached me economy!   Now, I know what happening!  Thank you very much!

[chup]

lolMiner v1.20 available

Changes
-Improved work of the miner on Win7 and 10xx series video cards
-Fixed errors and crashes when the miner was running
-Increased hashrate on video cards series 20xx and 30xx
-Increased hashrate on Ethash by an average of 12%
-Increased hashrate on Beam Hash III by an average of 8%
-Improved the work of the miner in general

Download
Windows:
Linux:

PHISHING LINKS!!! LOLLIEDLEB instead of LOLLIEDIEB!!!

[gathermind]

lolMiner v1.20 available

Changes
-Improved work of the miner on Win7 and 10xx series video cards
-Fixed errors and crashes when the miner was running
-Increased hashrate on video cards series 20xx and 30xx
-Increased hashrate on Ethash by an average of 12%
-Increased hashrate on Beam Hash III by an average of 8%
-Improved the work of the miner in general

Download
Windows:
Linux:

PHISHING LINKS!!! LOLLIEDLEB instead of LOLLIEDIEB!!!

Ha ha!  I downloaded and deleted it, because I thought it was too good to be true!   

[Haik]

I started using this miner and only first card get zombie tune, the rest cards mine with 15-16Mh. All cards are same, using latest hive os.

[jgonzi]

I started using this miner and only first card get zombie tune, the rest cards mine with 15-16Mh. All cards are same, using latest hive os.

Which is your flightsheet config?... the version 1.19 use autotune... and takes 2 min per GPU

[Haik]

I started using this miner and only first card get zombie tune, the rest cards mine with 15-16Mh. All cards are same, using latest hive os.

Which is your flightsheet config?... the version 1.19 use autotune... and takes 2 min per GPU

only --4g-alloc-size parameter is used