[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Any new updates..? Can't update Claymore cos need to update Awesome Miner first..

The latest Claymore miners was part of the development releases, but today Awesome Miner 4.0 was released so you can simply upgrade to that version to get built-in support for Claymore Ethereum Miner 10.0.

[1714950571]

1714950571

[TechAlley]

this software looks awesome? is there any fees or charges involved?

reminds me of simple Mining OS , or PIMP OS , only with mobile integration.

i'll def install it and give it a shot.

[patrike]

I am trying with two S9.

One question, when i switch the pool by the software, for example to Nicehash. On nicehash i have S9 in name field for two miners.
Why ? The worker name is different in it, S9_1 and S9_2, and it's S9 on both. Underscore is not supported ?
And about pool details, i have my BTC wallet in Worker name and Wallet address.
To be honest, i am not sure it's work very well with nicehash... Before use your software, i had an empty name...

Thanks for the update 4.0 !!

Oh and, how you change the frequency of S9 in last version ?
I find nothing to do that in manual... Prefer to overclock it

There are some characters that cannot be used, and this can depend on type of miner. So if underscore isn't working, it's just to try with dot or something else instead.

For Nicehash, you only need to put your Bitcoin address in the Worker name field. Wallet address is only used for some pools and never with ASIC's and Antminers.

Frequency change was only supported on the Antminer S9 from 2016, and Bitmain remove the way it could be changed over SSH after that. I have a quite new Antminer that I've not even connected yet. Once I do that, I can see if I can figure out a way to solve this on new Antminers as well - but it probably a limitation in the Antminer itself.

[patrike]

Hello,

First time posting on BT forums. First off, thanks for this great piece of software.

I have 1 issue and 1 question.

Issue:
I've setup a managed profit miner and configured a custom pool group to mine coins directly. However my miner only mines 1 pool out of the whole list and does not show any other pool in its pool list.
image

Question:
How does this software handle a rig with diffrent GPUs. For Example 4 Nvidia 1080ti GPUs and 3 AMD 580 GPUs? Can I set benchmarks and mining on a per GPU or GPU group like Nicehash?

Thank you!

Welcome!

Awesome Miner will only add the pools that the mining software actually support. Can you give an example of which mining software that was running (Claymore Ethereum, Ccminer, ...) and the algorithm of the pool that was missing.

The screenshot link you provided didn't work for me.

You should benchmark each unique type of GPU and save it to a Profit profile that is unique for that GPU. If you will be mining I assume you run two Managed Miners, one for the nVidia GPU's and one for the AMD GPU's. Otherwise I suppose it's only the Claymore Ethereum miner that may support both of them

More about benchmarking:
http://www.awesomeminer.com/help/benchmark.aspx

[patrike]

this software looks awesome? is there any fees or charges involved?

reminds me of simple Mining OS , or PIMP OS , only with mobile integration.

i'll def install it and give it a shot.

Thanks - It is awesome!
There are both free and paid versions of Awesome Miner available, depending on how many miners you have and what kind of features you want. See this page for details:
http://www.awesomeminer.com/buy.aspx

[SickTricky]

Is there a way to change the "stratum+tcp://" in online services to "ssl://" where it doesnt change the ethash or equihash lines?

So you want this for some of the pools, so the settings in Options dialog, Online services, where you can define the templates - it's not flexible enough for this scenario?

once I change for ex. Miningpoolhubs stratum+tcp://, then claymore Cryptonight connects secure but ethereum fails to connect. as ethereum doesnt have an ssl feature on miningpoolhub

[patrike]

Hello,

First time posting on BT forums. First off, thanks for this great piece of software.

I have 1 issue and 1 question.

Issue:
I've setup a managed profit miner and configured a custom pool group to mine coins directly. However my miner only mines 1 pool out of the whole list and does not show any other pool in its pool list.
image

Question:
How does this software handle a rig with diffrent GPUs. For Example 4 Nvidia 1080ti GPUs and 3 AMD 580 GPUs? Can I set benchmarks and mining on a per GPU or GPU group like Nicehash?

Thank you!

Welcome!

Awesome Miner will only add the pools that the mining software actually support. Can you give an example of which mining software that was running (Claymore Ethereum, Ccminer, ...) and the algorithm of the pool that was missing.

The screenshot link you provided didn't work for me.

You should benchmark each unique type of GPU and save it to a Profit profile that is unique for that GPU. If you will be mining I assume you run two Managed Miners, one for the nVidia GPU's and one for the AMD GPU's. Otherwise I suppose it's only the Claymore Ethereum miner that may support both of them

More about benchmarking:
http://www.awesomeminer.com/help/benchmark.aspx

Here are some screenshots. Pictures are worth a 1000 words. I can mind both pools individually without changing another setting.

As for the multi-gpu. I have mixed GPUs on the same PC. Is this supported?

Thanks. I do however need to ask if you could send me an e-mail with the Log file as well (Toolbar: Tools -> Log file).

Yes you can mix GPU's. You can also have two mining software (two Managed Miners) running at the same time, where one do mining with the AMD GPU's and the otherone with nVidia GPU's.

[patrike]

If anyone receives an Antminer D3 soon, I would be very glad if you could send me an API report (Toolbar: Tools -> API Report) for the miner so I can confirm if it works great together with Awesome Miner.

Many thanks!

[wolfen]

Trying to use profit switching using external miners.
I have the enable profile box checked.
I have the coins defined for the two different pools, BTC and BCC.
BCC seems to be at $17 per day and BTC is at $14 per day.
BTC is the primary pool, BCC the secondary.
It doesn't switch to BCC when I start it up, stays on BTC.
Am I missing something? I know there is a bunch of configuration for managed miners that I don't need.

[wolfen]

Trying to use profit switching using external miners.
I have the enable profile box checked.
I have the coins defined for the two different pools, BTC and BCC.
BCC seems to be at $17 per day and BTC is at $14 per day.
BTC is the primary pool, BCC the secondary.
It doesn't switch to BCC when I start it up, stays on BTC.
Am I missing something? I know there is a bunch of configuration for managed miners that I don't need.

Kick ass product!

[wolfen]

viabtc has a smart.viabtc.com that is supposed to switch from BTC to BCC if the profitability is better.
I has switched  a few times but  doesn't seem to follow coinwarz or awesome miner profit reporting.
Was hoping I could get awesome miner to be a bit more sensitive to the profitability.

[tf2addict]

Just installed Awesome Miner 4, this is my first experience with it.  Like what I see so far, will make live much simpler.

[FlensGold]

Just one question I have been asked yesterday: Is the free version limited so that Miners can not be deleted (although it is limited to 2 miners)? Since I have a full version (and no miners currently) I could not verify this...

[patrike]

Just one question I have been asked yesterday: Is the free version limited so that Miners can not be deleted (although it is limited to 2 miners)? Since I have a full version (and no miners currently) I could not verify this...

Miners can always be removed no matter which edition of Awesome Mier you run. Go to Options dialog and then either Managed Miners or External Miners. From there you can remove miners, and of course that is fully possible on the free version as well.

[patrike]

Trying to use profit switching using external miners.
I have the enable profile box checked.
I have the coins defined for the two different pools, BTC and BCC.
BCC seems to be at $17 per day and BTC is at $14 per day.
BTC is the primary pool, BCC the secondary.
It doesn't switch to BCC when I start it up, stays on BTC.
Am I missing something? I know there is a bunch of configuration for managed miners that I don't need.

Is this for an Antminer S9 or similar? Is it running with Privileged API access (you can see that on the Summary tab when you select a miner in Awesome Miner)

[tf2addict]

Question:  my rig contains a mix of AMD and Nvidia.  I want to disable dual mining (DCR) on the Nvidia cards.  I figured if I entered the Claymore command line parameter -di 012 for the DCR pool that would work but it doesn't do anything.   Can I do what I want to do?

[plbartie]

Any possible way to run Awesome miner (not Remote agent) on 2 different pc's with exact same config and sort of sync with each other?

[wolfen]

Trying to use profit switching using external miners.
I have the enable profile box checked.
I have the coins defined for the two different pools, BTC and BCC.
BCC seems to be at $17 per day and BTC is at $14 per day.
BTC is the primary pool, BCC the secondary.
It doesn't switch to BCC when I start it up, stays on BTC.
Am I missing something? I know there is a bunch of configuration for managed miners that I don't need.

Is this for an Antminer S9 or similar? Is it running with Privileged API access (you can see that on the Summary tab when you select a miner in Awesome Miner)

Yes S9
I'm pretty sure running Privileged. I'll check again.
Usually if not running privileged drop down for miner actions(restart) are greyed out, they are not.
Thanks

[ordimans]

If anyone receives an Antminer D3 soon, I would be very glad if you could send me an API report (Toolbar: Tools -> API Report) for the miner so I can confirm if it works great together with Awesome Miner.

Many thanks!

Did you try with iBelink DL11G or DM22G ?

I am trying with two S9.

One question, when i switch the pool by the software, for example to Nicehash. On nicehash i have S9 in name field for two miners.
Why ? The worker name is different in it, S9_1 and S9_2, and it's S9 on both. Underscore is not supported ?
And about pool details, i have my BTC wallet in Worker name and Wallet address.
To be honest, i am not sure it's work very well with nicehash... Before use your software, i had an empty name...

Thanks for the update 4.0 !!

Oh and, how you change the frequency of S9 in last version ?
I find nothing to do that in manual... Prefer to overclock it

There are some characters that cannot be used, and this can depend on type of miner. So if underscore isn't working, it's just to try with dot or something else instead.

For Nicehash, you only need to put your Bitcoin address in the Worker name field. Wallet address is only used for some pools and never with ASIC's and Antminers.

Frequency change was only supported on the Antminer S9 from 2016, and Bitmain remove the way it could be changed over SSH after that. I have a quite new Antminer that I've not even connected yet. Once I do that, I can see if I can figure out a way to solve this on new Antminers as well - but it probably a limitation in the Antminer itself.

Ok thanks.
No problem with Kano

I love your dashboard with charts, very beautiful and useful !! Good jobs.
It will be possible to add one scale like 6h or last 12hours.But maybe you don't keep data. And it will be possible to history fan speed in the chart too ?
And i don't found the feature, but it will possible to have a push notif(pushover or anything else) if one pass below a hashrate specified.

Last thing, about temp, on Asic part, the Temperature is for PCB, and on Summary is Chip temperature as it's write. I am right ?

[tf2addict]

Is there any way to see the actual command line that is being used to launch Claymore Dual Miner?  I'm having a hard time configuring pools for Mining Pool Hub and it would be much easier to troubleshoot if I could see the command line.

I am unable to get any pool working with Mining Pool Hub.  It's complaining that I need to set -allcoins but no matter what I do I cannot seem to set that in the pool config.  What am I doing wrong?  Can anyone please post their Mining Pool Hub pool config so I can compare?