UnclWish
|
|
September 26, 2019, 01:19:06 PM |
|
They not so great... Just about 0.2-0.4MH better than usual good eth hynix timings. And I will not share them. Sorry.
is ~1% better than some, as you called, usual good timing every positive percentage is great noways, cause in this case, you can simply "forget" the pool fee for example when you make some math to predict a month revenue if you have one card, or one rig, maybe is not a number of interest, but for a mining farm a ~1% of increase in profit is a number of interest Yes, when rig is big this 1% is important. I'm taked usual good timings for hynix memory and spent many time in tries to improve them... Every change I flashed timing into vbios, restarted comp and make tests some time. So I invested a lot of time in 1% improvement for timings and making them stable. I use 1235MHz cclock with 856mV and 2250MHZ mclock with 800mv. Card is Sapphire RX 580 Nitro+ SE. Good card with good memory cooling and ASIC quality. I have other 580 card with hynix memory, but it can't handle 2250 memory clock with this straps and require more core and memory clocks to work proper - MSI GAMING X 8Gb. Not so good as Sapphire... So I maked 2nd good timings for not so good cards. And them also a bit faster than usual good hynix timings and allows my MSI to work on 2215MHz memory clock with 850mV memory with about 32,5MH/s on Claymore with rxboost and 33,3MH on Phoenix with clKernel 3.
|
|
|
|
|
|
"In a nutshell, the network works like a distributed
timestamp server, stamping the first transaction to spend a coin. It
takes advantage of the nature of information being easy to spread but
hard to stifle." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
bategojko74
Member
Offline
Activity: 220
Merit: 12
|
|
September 26, 2019, 09:08:16 PM |
|
They not so great... Just about 0.2-0.4MH better than usual good eth hynix timings. And I will not share them. Sorry.
is ~1% better than some, as you called, usual good timing every positive percentage is great noways, cause in this case, you can simply "forget" the pool fee for example when you make some math to predict a month revenue if you have one card, or one rig, maybe is not a number of interest, but for a mining farm a ~1% of increase in profit is a number of interest Yes, when rig is big this 1% is important. I'm taked usual good timings for hynix memory and spent many time in tries to improve them... Every change I flashed timing into vbios, restarted comp and make tests some time. So I invested a lot of time in 1% improvement for timings and making them stable. I use 1235MHz cclock with 856mV and 2250MHZ mclock with 800mv. Card is Sapphire RX 580 Nitro+ SE. Good card with good memory cooling and ASIC quality. I have other 580 card with hynix memory, but it can't handle 2250 memory clock with this straps and require more core and memory clocks to work proper - MSI GAMING X 8Gb. Not so good as Sapphire... So I maked 2nd good timings for not so good cards. And them also a bit faster than usual good hynix timings and allows my MSI to work on 2215MHz memory clock with 850mV memory with about 32,5MH/s on Claymore with rxboost and 33,3MH on Phoenix with clKernel 3. Respect man. You are real Pro!
|
|
|
|
jmigdlc99
|
|
September 27, 2019, 08:28:31 AM |
|
Amazing to see Claymore still powering through miner updates. I can only imagine how much money he already has from all the dev fees. I wouldn't be surprised if hes already retired.
Quoting a post from reddit: "If half of miners use Claymore's software, the coins they mine are $5m/day. If the fee is 2%, Claymore earns about $100000 a day. That's $36 million a year"
Damn.
|
0xacBBa937A57ecE1298B5d350f40C0Eb16eC5fA4B
|
|
|
bategojko74
Member
Offline
Activity: 220
Merit: 12
|
|
September 27, 2019, 05:19:12 PM Last edit: September 28, 2019, 01:14:04 AM by bategojko74 |
|
Amazing to see Claymore still powering through miner updates. I can only imagine how much money he already has from all the dev fees. I wouldn't be surprised if hes already retired.
Quoting a post from reddit: "If half of miners use Claymore's software, the coins they mine are $5m/day. If the fee is 2%, Claymore earns about $100000 a day. That's $36 million a year"
Damn.
$36 million a year - this was back in 2017-2018 year!!! Currently all the mined coins are $2M USD/day. Infact 40% use claymore and his real fee is 1.3% so he earns just about 3.8 million per year. Poor Claymore. Let us donate him at the following Claymore's ETH addresses (where his devfee is send): 0x34FAAa028162C4d4E92DB6abfA236A8E90fF2FC3 0x3509F7bd9557F8a9b793759b3E3bfA2Cd505ae31 0x7Fb21ac4Cd75d9De3E1c5D11D87bB904c01880fc 0xB9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA 0xc1c427cD8E6B7Ee3b5F30c2e1D3f3c5536EC16f5 0xc6F31A79526c641de4E432CB22a88BB577A67eaC 0xdE088812A9c5005b0dC8447B37193c9e8b67a1fF 0xe19fFB70E148A76d26698036A9fFD22057967D1b
|
|
|
|
user0071
Newbie
Offline
Activity: 11
Merit: 0
|
|
September 28, 2019, 12:56:19 AM Last edit: September 28, 2019, 01:12:05 AM by user0071 |
|
Hi all,
having a problem that i defeated once before, but struggling with again.
Reinstalled Adrenaline drivers for 18.2 (which have been working perfectly for a long time). Windows updated which blew everything up. no matter what i do, it still updates every few months. When I open claymore v 15, it gets through detecting the GPUs and then starts to "build Open CL" and then closes. adding "pause" doesn't give me any more info. In GPU-Z, i see that Open-CL is not checked for any of my GPUS (470s and 570s). In my troubleshooting notes, I have that not having a monitor attached can cause this, but there IS a monitor attached, so i'm a little perplexed. something with the computer doesn't see Open CL. I'm not quite sure why. I'm using software and hardeware that i've used consisitently for the past 2 years.
To be specific, here is the log
20:10:29:922 e80 ETH: 1 pool is specified 20:10:29:922 e80 Main Ethereum pool is us1.ethermine.org:4444 20:10:37:324 e80 OpenCL platform: AMD Accelerated Parallel Processing 20:10:37:327 e80 OpenCL platform: AMD Accelerated Parallel Processing 20:10:37:332 e80 OpenCL initializing...
20:10:37:333 e80 AMD Cards available: 5 20:10:37:334 e80 GPU #0: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 1:0:0) 20:10:37:335 e80 gpu 0 max alloc size is 4048 MB 20:10:37:336 e80 GPU #0 recognized as Radeon RX 470/570 20:10:37:348 e80 GPU #1: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 3:0:0) 20:10:37:348 e80 gpu 1 max alloc size is 4048 MB 20:10:37:350 e80 GPU #1 recognized as Radeon RX 470/570 20:10:37:351 e80 GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 4:0:0) 20:10:37:352 e80 gpu 2 max alloc size is 3840 MB 20:10:37:352 e80 GPU #2 recognized as Radeon RX 470/570 20:10:37:419 e80 GPU #3: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 32 compute units (pci bus 6:0:0) 20:10:37:419 e80 gpu 3 max alloc size is 3840 MB 20:10:37:421 e80 GPU #3 recognized as Radeon RX 470/570 20:10:37:422 e80 GPU #4: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) 20:10:37:424 e80 gpu 4 max alloc size is 3840 MB 20:10:37:426 e80 GPU #4 recognized as Radeon RX 470/570 20:10:37:428 e80 POOL/SOLO version 20:10:37:428 e80 Platform: Windows 20:10:37:680 e80 start building OpenCL program for GPU 0...
and then it closes. adding "pause" doesn't help.
|
|
|
|
akhzayn
|
|
September 28, 2019, 01:49:42 AM |
|
Hi all,
having a problem that i defeated once before, but struggling with again.
Reinstalled Adrenaline drivers for 18.2 (which have been working perfectly for a long time). Windows updated which blew everything up. no matter what i do, it still updates every few months. When I open claymore v 15, it gets through detecting the GPUs and then starts to "build Open CL" and then closes. adding "pause" doesn't give me any more info. In GPU-Z, i see that Open-CL is not checked for any of my GPUS (470s and 570s). In my troubleshooting notes, I have that not having a monitor attached can cause this, but there IS a monitor attached, so i'm a little perplexed. something with the computer doesn't see Open CL. I'm not quite sure why. I'm using software and hardeware that i've used consisitently for the past 2 years.
~~~~
and then it closes. adding "pause" doesn't help.
try using linux or use https://hiveos.farm , a problem that you have a lot of happens if the windows are updated, so many windows users who reinstall the os to solve the problem
|
|
|
|
NCarter84
Jr. Member
Offline
Activity: 195
Merit: 4
|
|
September 28, 2019, 02:29:32 AM |
|
Hi all,
having a problem that i defeated once before, but struggling with again.
Reinstalled Adrenaline drivers for 18.2 (which have been working perfectly for a long time). Windows updated which blew everything up. no matter what i do, it still updates every few months. When I open claymore v 15, it gets through detecting the GPUs and then starts to "build Open CL" and then closes. adding "pause" doesn't give me any more info. In GPU-Z, i see that Open-CL is not checked for any of my GPUS (470s and 570s). In my troubleshooting notes, I have that not having a monitor attached can cause this, but there IS a monitor attached, so i'm a little perplexed. something with the computer doesn't see Open CL. I'm not quite sure why. I'm using software and hardeware that i've used consisitently for the past 2 years.
To be specific, here is the log
20:10:29:922 e80 ETH: 1 pool is specified 20:10:29:922 e80 Main Ethereum pool is us1.ethermine.org:4444 20:10:37:324 e80 OpenCL platform: AMD Accelerated Parallel Processing 20:10:37:327 e80 OpenCL platform: AMD Accelerated Parallel Processing 20:10:37:332 e80 OpenCL initializing...
20:10:37:333 e80 AMD Cards available: 5 20:10:37:334 e80 GPU #0: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 1:0:0) 20:10:37:335 e80 gpu 0 max alloc size is 4048 MB 20:10:37:336 e80 GPU #0 recognized as Radeon RX 470/570 20:10:37:348 e80 GPU #1: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 3:0:0) 20:10:37:348 e80 gpu 1 max alloc size is 4048 MB 20:10:37:350 e80 GPU #1 recognized as Radeon RX 470/570 20:10:37:351 e80 GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 4:0:0) 20:10:37:352 e80 gpu 2 max alloc size is 3840 MB 20:10:37:352 e80 GPU #2 recognized as Radeon RX 470/570 20:10:37:419 e80 GPU #3: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 32 compute units (pci bus 6:0:0) 20:10:37:419 e80 gpu 3 max alloc size is 3840 MB 20:10:37:421 e80 GPU #3 recognized as Radeon RX 470/570 20:10:37:422 e80 GPU #4: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) 20:10:37:424 e80 gpu 4 max alloc size is 3840 MB 20:10:37:426 e80 GPU #4 recognized as Radeon RX 470/570 20:10:37:428 e80 POOL/SOLO version 20:10:37:428 e80 Platform: Windows 20:10:37:680 e80 start building OpenCL program for GPU 0...
and then it closes. adding "pause" doesn't help.
Perhaps try a newer driver...
|
|
|
|
strelly83
Newbie
Offline
Activity: 20
Merit: 0
|
|
September 28, 2019, 06:00:23 AM |
|
Theoritically, you can put Four Reference cards Navi in MSI X570 Godlike. My current tower cooler blocks the first GPU slot. Waiting on 3950X before actually putting the bonus MasterLiquid AIO from MSI X570's promotions. Anyway, I tried with three GPUS (one custom AIO cooled, two reference coolers) and it works just fine. Their temps are not catastrophic either; With fan speeds less than 50% (therefore noise is tame), the GPU temps are around 65-75 oC, with memory junction temp around 90 oC. https://youtu.be/IDsYGdhxayAAfter 3950X is here, I will get one of that and another reference card 5700 and my goal of having four GPUs in one motherboard will be achieved. For now the RX 5700 yiels around 48-49 Mh/S each with maximum GPU temps around 70 oC with memory temps around 90 oC, with fans running below 40 %. This RX 5700 reference design is just great for me. Can't see any reason not to make 52 mh/s with lower power consumption and gpu temps about 62 and mem temps about 72 and fans below 40. You will damage your memory in long term on 90 degree. Read my previous post and use PM with -tt 62 -cclock 1300 -mclock 900 -cvvdc 750 You can even use -mclock 910 for 52.7mh/s but you have to find lower -tt between 54 and 62. 54 works for sure. The fans will go between 40% and 60% depending on -tt .Currently testing ... -mclock 910 -tt 58 ..., seems very stable. Memory at 76 degree C. Fans at 46%. Power consumption 94 Watts. Hi everyone, I have a Sapphire RX 5700 Pulse and I'm in this same situation: if I set -tt 58 -cclock 1300 -mclock 900 -cvvdc 750 the memory temperature never drops below 88-90 °. I tried to decrease mclock value but it seems that any value inherent the memory that I set the program does not take it into consideration...do you have any suggestions? Is it necessary to unlock the card in any way? I'm willing to get a few Mh / s less than the current 50 but with slightly lower temperatures ...
|
|
|
|
batsonxl
Member
Offline
Activity: 1194
Merit: 26
|
|
September 28, 2019, 06:26:35 AM |
|
Amazing to see Claymore still powering through miner updates. I can only imagine how much money he already has from all the dev fees. I wouldn't be surprised if hes already retired.
Quoting a post from reddit: "If half of miners use Claymore's software, the coins they mine are $5m/day. If the fee is 2%, Claymore earns about $100000 a day. That's $36 million a year"
Damn.
$36 million a year - this was back in 2017-2018 year!!! Currently all the mined coins are $2M USD/day. Infact 40% use claymore and his real fee is 1.3% so he earns just about 3.8 million per year. Poor Claymore. Let us donate him at the following Claymore's ETH addresses (where his devfee is send): 0x34FAAa028162C4d4E92DB6abfA236A8E90fF2FC3 0x3509F7bd9557F8a9b793759b3E3bfA2Cd505ae31 0x7Fb21ac4Cd75d9De3E1c5D11D87bB904c01880fc 0xB9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA 0xc1c427cD8E6B7Ee3b5F30c2e1D3f3c5536EC16f5 0xc6F31A79526c641de4E432CB22a88BB577A67eaC 0xdE088812A9c5005b0dC8447B37193c9e8b67a1fF 0xe19fFB70E148A76d26698036A9fFD22057967D1b i dont understand people who counts someone else money.what can bring it for you? Instead wasting for calculating that you could do invent something like that too and make your own devfee. Do it 0.1% 10% it is all up to you. Claymore doing great job and im glad to pay him 1.3$ for earned 100$. Keep it claymore as long as you can. Thanks
|
|
|
|
bategojko74
Member
Offline
Activity: 220
Merit: 12
|
|
September 28, 2019, 08:43:12 AM |
|
Amazing to see Claymore still powering through miner updates. I can only imagine how much money he already has from all the dev fees. I wouldn't be surprised if hes already retired.
Quoting a post from reddit: "If half of miners use Claymore's software, the coins they mine are $5m/day. If the fee is 2%, Claymore earns about $100000 a day. That's $36 million a year"
Damn.
$36 million a year - this was back in 2017-2018 year!!! Currently all the mined coins are $2M USD/day. Infact 40% use claymore and his real fee is 1.3% so he earns just about 3.8 million per year. Poor Claymore. Let us donate him at the following Claymore's ETH addresses (where his devfee is send): 0x34FAAa028162C4d4E92DB6abfA236A8E90fF2FC3 0x3509F7bd9557F8a9b793759b3E3bfA2Cd505ae31 0x7Fb21ac4Cd75d9De3E1c5D11D87bB904c01880fc 0xB9cF2dA90Bdff1BC014720Cc84F5Ab99d7974EbA 0xc1c427cD8E6B7Ee3b5F30c2e1D3f3c5536EC16f5 0xc6F31A79526c641de4E432CB22a88BB577A67eaC 0xdE088812A9c5005b0dC8447B37193c9e8b67a1fF 0xe19fFB70E148A76d26698036A9fFD22057967D1b i dont understand people who counts someone else money.what can bring it for you? Instead wasting for calculating that you could do invent something like that too and make your own devfee. Do it 0.1% 10% it is all up to you. Claymore doing great job and im glad to pay him 1.3$ for earned 100$. Keep it claymore as long as you can. Thanks I don't mind the honestly won millions but I don't understand people that accept to be lied: you have been charged 1.3% when it is clearly stated that you should be charged 1%.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 28, 2019, 10:43:28 AM |
|
I don't mind the honestly won millions but I don't understand people that accept to be lied: you have been charged 1.3% when it is clearly stated that you should be charged 1%.
Oh, another newbie states that I'm a thief. I don't care when you get crazy numbers like 39 or 19M$, you can even call me the richest person of this planet, I don't mind. But if you call me a thief and state that I lie about devfee rate, show some proofs.
|
|
|
|
big_daddy
|
|
September 28, 2019, 10:54:36 AM |
|
I don't mind the honestly won millions but I don't understand people that accept to be lied: you have been charged 1.3% when it is clearly stated that you should be charged 1%.
Oh, another newbie states that I'm a thief. I don't care when you get crazy numbers like 39 or 19M$, you can even call me the richest person of this planet, I don't mind. But if you call me a thief and state that I lie about devfee rate, show some proofs. all I can say is: Thank You Claymore for your work Your contribution in the crypto world is simply immeasurable
|
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
micalith
|
|
September 28, 2019, 02:21:56 PM |
|
I am using RX580 and started to mine a week ago. The supposed hash rate should be 30-31 mh I guess but I don't seem to get that one. I only get 27.7 mh. I made lots of searches, used the latest drivers and switched my gpu to compute mode, nothing changed. Any other advices that I can get?
|
|
|
|
laineux
|
|
September 28, 2019, 02:30:14 PM |
|
Hello @claymore Is it possible to add the block number each time this line appears ? ETH: 09/28/19-16:28:35 - New job from eu2.ethermine.org:14444
thank you (for your very hard work)
|
|
|
|
NCarter84
Jr. Member
Offline
Activity: 195
Merit: 4
|
|
September 28, 2019, 02:38:16 PM |
|
I am using RX580 and started to mine a week ago. The supposed hash rate should be 30-31 mh I guess but I don't seem to get that one. I only get 27.7 mh. I made lots of searches, used the latest drivers and switched my gpu to compute mode, nothing changed. Any other advices that I can get?
What clocks are you running?
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 28, 2019, 02:45:59 PM |
|
@big_daddy: thanks! Is it possible to add the block number each time this line appears ?
Unfortunately, pools don't send block number, they only send seedhash so miner can detect epoch number only, not the block number.
|
|
|
|
micalith
|
|
September 28, 2019, 02:58:08 PM |
|
I am using RX580 and started to mine a week ago. The supposed hash rate should be 30-31 mh I guess but I don't seem to get that one. I only get 27.7 mh. I made lots of searches, used the latest drivers and switched my gpu to compute mode, nothing changed. Any other advices that I can get?
What clocks are you running? well, I tried different time periods if you mean this. Night or day, doesn't matter. It is stable around 27.7 ish. And another issues that I have is internet connection. I lose the internet connection if I try to use the internet for other things with mining. I don't have a rig, I am just learning and trying through my personal computer.
|
|
|
|
Guigs321
Newbie
Offline
Activity: 41
Merit: 0
|
|
September 28, 2019, 03:31:35 PM |
|
I am using RX580 and started to mine a week ago. The supposed hash rate should be 30-31 mh I guess but I don't seem to get that one. I only get 27.7 mh. I made lots of searches, used the latest drivers and switched my gpu to compute mode, nothing changed. Any other advices that I can get?
What clocks are you running? well, I tried different time periods if you mean this. Night or day, doesn't matter. It is stable around 27.7 ish. And another issues that I have is internet connection. I lose the internet connection if I try to use the internet for other things with mining. I don't have a rig, I am just learning and trying through my personal computer. The frequencies of your GPU and Vram. I get 33,1 Mh/s (RX580) with these settings : -rxboost 1 -strap 2 -cclock 1220 -mclock 2200 -cvddc 900
|
|
|
|
bategojko74
Member
Offline
Activity: 220
Merit: 12
|
|
September 28, 2019, 04:05:28 PM |
|
I don't mind the honestly won millions but I don't understand people that accept to be lied: you have been charged 1.3% when it is clearly stated that you should be charged 1%.
Oh, another newbie states that I'm a thief. I don't care when you get crazy numbers like 39 or 19M$, you can even call me the richest person of this planet, I don't mind. But if you call me a thief and state that I lie about devfee rate, show some proofs. Oops, Sorry. I am in mistake. Your devfee is honest but your hashrate is fake with about 1.5% higher. Everybody can see that by subtracting the pool hash rate from your hashrate doesn't gives 1% (devfee) difference but gives about 2.5% which means that your real hashrate is about 1.5% lower.
|
|
|
|
micalith
|
|
September 28, 2019, 04:34:04 PM |
|
I am using RX580 and started to mine a week ago. The supposed hash rate should be 30-31 mh I guess but I don't seem to get that one. I only get 27.7 mh. I made lots of searches, used the latest drivers and switched my gpu to compute mode, nothing changed. Any other advices that I can get?
What clocks are you running? well, I tried different time periods if you mean this. Night or day, doesn't matter. It is stable around 27.7 ish. And another issues that I have is internet connection. I lose the internet connection if I try to use the internet for other things with mining. I don't have a rig, I am just learning and trying through my personal computer. The frequencies of your GPU and Vram. I get 33,1 Mh/s (RX580) with these settings : -rxboost 1 -strap 2 -cclock 1220 -mclock 2200 -cvddc 900 I used your setting and got 31 Mh/s, thanks. What about the internet connection issues that I get? Could it be related to my modem? Another question is what do you mine and what is your ROI?
|
|
|
|
|