Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[IojkinKot]

Sapphire rx580 8G Samsung
strap 1
rxboost 1
33,5 Mh/s

1250@2200
http://i66.tinypic.com/2uoszfp.png

[boatznhoes]

I have uploaded Linux build again, please use it, it must write "b737" in the log at the beginning which means latest build number.

rxboost and strap do not work in linux correct?

[Er0l]

I have uploaded Linux build again, please use it, it must write "b737" in the log at the beginning which means latest build number.

rxboost and strap do not work in linux correct?

Correct, you can use amdmemtweak or patched rxboost tool from smos, they locked to their OS by default

[Lunga Chung]

I have uploaded Linux build again, please use it, it must write "b737" in the log at the beginning which means latest build number.

rxboost and strap do not work in linux correct?

Correct, you can use amdmemtweak or patched rxboost tool from smos, they locked to their OS by default

are the values the same in smos for rxboost like in win version of Claymor?

[rdbase]

Sapphire rx580 8G Samsung
strap 1
rxboost 1
33,5 Mh/s

1250@2200

This is quite a boost of hashrate just for the addition of this rxboost intergrated into the miner.
Where you getting 31.5mh/s before the boost was initiated?

[ayiphelmy]

Slower in nvidia???

[Divinity666]

Is there a command to shorten the delay when Claymore loses the pool and tries to reconnect? It's 20 seconds by default which is way to long if u ask me...

[Sukerl]

Hi there!

I'm having problems with version 14.6 on Linux. I have 6 RX580 cards (all the same kind) running fine on version 12.0 but on version 14.6 there are only 3 cards shown. Switching back to 12.0 resolves the problem.

I use build 737 as mentioned a few posts back, see logs below.

Best regards

Sukerl

Code:

21:12:51:551 747580c0 ����������������������������������������������������������������ͻ
21:12:51:551 747580c0 �                Claymore's Dual GPU Miner - v14.6               �
21:12:51:551 747580c0 �              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             �
21:12:51:551 747580c0 ����������������������������������������������������������������ͼ
21:12:51:551 747580c0
21:12:51:551 747580c0 b737
21:12:51:751 747580c0 ETH: 6 pools are specified
21:12:51:751 747580c0 Main Ethereum pool is eu1.ethermine.org:4444
21:12:58:336 747580c0 OpenCL platform: AMD Accelerated Parallel Processing
21:12:58:337 747580c0 OpenCL initializing...

21:12:58:337 747580c0 AMD Cards available: 3
21:12:58:337 747580c0 GPU #0: Ellesmere (Radeon RX 580 Series), 8172 MB available, 36 compute units (pci bus 1:0:0)
21:12:58:337 747580c0 GPU #0 recognized as Radeon RX 480/580
21:12:58:337 747580c0 GPU #1: Ellesmere (Radeon RX 580 Series), 8180 MB available, 36 compute units (pci bus 2:0:0)
21:12:58:337 747580c0 GPU #1 recognized as Radeon RX 480/580
21:12:58:337 747580c0 GPU #2: Ellesmere (Radeon RX 580 Series), 8180 MB available, 36 compute units (pci bus 3:0:0)
21:12:58:337 747580c0 GPU #2 recognized as Radeon RX 480/580
21:12:58:337 747580c0 POOL/SOLO version
21:12:58:337 747580c0 Platform: Linux
21:12:58:341 747580c0 AMD ADL library not found.
21:12:58:343 747580c0 amdgpu cnt: 5
21:12:58:349 747580c0 start building OpenCL program for GPU 0...
21:12:58:823 747580c0 done
21:12:59:026 747580c0 start building OpenCL program for GPU 1...
21:12:59:140 747580c0 done
21:12:59:347 747580c0 start building OpenCL program for GPU 2...
21:12:59:461 747580c0 done
21:12:59:702 747580c0 GPU #0: algorithm ASM 1
21:12:59:808 747580c0 GPU #1: algorithm ASM 1
21:12:59:908 747580c0 GPU #2: algorithm ASM 1
21:12:59:908 747580c0 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
21:12:59:908 747580c0 No NVIDIA CUDA GPUs detected.
21:12:59:908 747580c0 Total cards: 3

[Er0l]

I have uploaded Linux build again, please use it, it must write "b737" in the log at the beginning which means latest build number.

rxboost and strap do not work in linux correct?

Correct, you can use amdmemtweak or patched rxboost tool from smos, they locked to their OS by default

are the values the same in smos for rxboost like in win version of Claymor?

On advanced options set rxboost -i 30 and you are done

[darkCryptoMiner]

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

[P00P135]

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

Try 2000 mem and work your way up to something stable?

[darkCryptoMiner]

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

Try 2000 mem and work your way up to something stable?

I can try that - it  dies before any mining though - The rxboost without strap is stable

[..XyZ..]

@Claymore, please, can You add ewal value in "miner_getstat1" or "miner_getstat2" API response?

[iRrromka]

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

Try 2000 mem and work your way up to something stable?

I can try that - it  dies before any mining though - The rxboost without strap is stable

I have the same issue on similar hardware config on Clay 14.6 (asrock h110 with 13 AMD RX 588 Nitro+). The rig freezes on setting strap for second GPU in the list (index 01). Other rigs are fine.

[davescream]

Miner hangs on strap apply stage if monitor connected to that GPU. If monitor connected to another GPU - everythink fine.

Win10 x64, Sapphire RX470 Hynix 4gb

strap 1 rxboost 1
hanging even with memory clock 1700mhz 

[lebuawu2]

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

if you said without strap you already got 31.5mh then I believe you already flashed your bios.
in order to use strap you need to restore to original bios.

[darkCryptoMiner]

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

if you said without strap you already got 31.5mh then I believe you already flashed your bios.
in order to use strap you need to restore to original bios.

Interesting. I would have thought the on the fly straps would override whatever straps there were..

[Bojcha]

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

if you said without strap you already got 31.5mh then I believe you already flashed your bios.
in order to use strap you need to restore to original bios.

Interesting. I would have thought the on the fly straps would override whatever straps there were..

I have same problem on AsRockH110 and curently trying to find what is problem. And card can be flashed to whatever bios to use miner's straps. So its not that.

[simpleCZAR]

Hi NOOB here
Does anyone know of any secret ETH miners as whattomine now shows 80mh for vega 64. They show 90 for radeon vii and are usually accurate about this stuff.
The max I can do is 47.5  on a vega 64 with rare incorrects
I am not sure if this is an error or some new information that we should all know

Thank you

[Marvell2]

what causes the illegal memory access on some cards ? Nvidia that is ? I'm suing the latest driver . this is even with default clocks and stock straps

seems to happen on my 1060 cards alot , and these cards all have six gig , this only occurs on eth , they can mine x16rt fine