willi9974
Legendary
 Offline
Activity: 3626
Merit: 2900
Enjoy 500% bonus + 70 FS
|
 |
May 30, 2017, 05:45:06 PM |
|
thx, i can read the cards and memory type
one open question, it is possible to save the bios local and edit it? edit the stripes and copy the 1500 value to the higher one and save it back?
|
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
May 30, 2017, 06:05:35 PM |
|
thx, i can read the cards and memory type
one open question, it is possible to save the bios local and edit it? edit the stripes and copy the 1500 value to the higher one and save it back?
If this is not available to do locally, how do you export the saved bios and then reupload it after you edit it on a remote computer? |
|
|
|
|
|
nu1mlock
|
|
May 30, 2017, 06:08:06 PM |
|
Why is "claymore eth+sia" option suddenly "not recommended"? What is the recommended way to dual mine them then?
You can just use the regular Claymore 9.4 miner and add arguments to mine SIA. That's what I've done from the beginning since I don't want to use dwarfpool. |
|
|
|
|
willi9974
Legendary
Offline
Activity: 3626
Merit: 2900
Enjoy 500% bonus + 70 FS
|
|
May 30, 2017, 06:42:41 PM |
|
thx, i can read the cards and memory type
one open question, it is possible to save the bios local and edit it? edit the stripes and copy the 1500 value to the higher one and save it back?
If this is not available to do locally, how do you export the saved bios and then reupload it after you edit it on a remote computer? ok thanks, so i can use polariseditor installed on windows to edit the under linux saved / exported Bios from the cards? sorry for the questions, but i will not brick my cards :-) |
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
May 30, 2017, 06:44:54 PM |
|
thx, i can read the cards and memory type
one open question, it is possible to save the bios local and edit it? edit the stripes and copy the 1500 value to the higher one and save it back?
If this is not available to do locally, how do you export the saved bios and then reupload it after you edit it on a remote computer? ok thanks, so i can use polariseditor installed on windows to edit the under linux saved / exported Bios from the cards? sorry for the questions, but i will not brick my cards :-) I'm not sure, I was asking a question |
|
|
|
|
willi9974
Legendary
Offline
Activity: 3626
Merit: 2900
Enjoy 500% bonus + 70 FS
|
|
May 30, 2017, 06:55:00 PM |
|
 i do not see the "?" 
|
|
|
|
sefo
Newbie
Offline
Activity: 45
Merit: 0
|
|
May 30, 2017, 07:16:20 PM |
|
Why is "claymore eth+sia" option suddenly "not recommended"? What is the recommended way to dual mine them then?
You can just use the regular Claymore 9.4 miner and add arguments to mine SIA. That's what I've done from the beginning since I don't want to use dwarfpool. Well, I tried copying settings from "claymore eth+sia" to "claymore-eth-v9.4", but it did not mine Sia at all. Can you share your settings? |
|
|
|
|
|
xleejohnx
|
|
May 30, 2017, 07:25:49 PM |
|
Why is "claymore eth+sia" option suddenly "not recommended"? What is the recommended way to dual mine them then?
You can just use the regular Claymore 9.4 miner and add arguments to mine SIA. That's what I've done from the beginning since I don't want to use dwarfpool. Well, I tried copying settings from "claymore eth+sia" to "claymore-eth-v9.4", but it did not mine Sia at all. Can you share your settings? Do 1130 core 1800 mem Youll mine at 25eth 500sia with good temps |
As I see a super coin as the super highway and alt coins as taxis and trucks needed to move transactions. ~philipma1957
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 30, 2017, 07:32:11 PM |
|
i do not see the "?" just curious what is the memory brand of your card? |
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 30, 2017, 08:42:25 PM |
|
I may have missed the list for special images.
I am installing smOS using this motherboard -- MSI Z270-A-PRO
Any specific RX image that I need to download?
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
willi9974
Legendary
Offline
Activity: 3626
Merit: 2900
Enjoy 500% bonus + 70 FS
|
|
May 30, 2017, 09:49:53 PM |
|
i do not see the "?" just curious what is the memory brand of your card? i can't say it, the RX 480 cards i have, but my riser adapter are on the road, i'm still waiting for the Riser. The Test from today was on my old rig root@simpleminer:~/utils# ./atiflash -i
adapter bn dn dID asic flash romsize test bios p/n
======= == == ==== =============== ============== ======= ==== ================
0 01 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
1 02 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
2 03 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
3 05 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
4 06 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
5 07 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
root@simpleminer:~/utils# amdmeminfo
AMDMemInfo by Zuikkis <zuikkis@gmail.com>
Updated by Yann St.Arnaud <ystarnaud@gmail.com>
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 01:00.0
OpenCL ID: 0
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:01:00.0
Memory type: Micron MT51J256M3
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 02:00.0
OpenCL ID: 1
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:02:00.0
Memory type: Micron MT51J256M3
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 03:00.0
OpenCL ID: 2
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:03:00.0
Memory type: Micron MT51J256M3
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 05:00.0
OpenCL ID: 3
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:05:00.0
Memory type: Micron MT51J256M3
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 06:00.0
OpenCL ID: 4
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:06:00.0
Memory type: Micron MT51J256M3
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 07:00.0
OpenCL ID: 5
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:07:00.0
Memory type: Micron MT51J256M3
root@simpleminer:~/utils#
but i collect all infos so i can start if all my hardware are here for my second rig. Backup Firmware from my cards over smOS, edit firmware on my windows pc and flash it back on smOS :-) so that is my plan and i hope it works and i do not brick my cards... Best Regards Willi |
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 30, 2017, 10:26:32 PM |
|
i do not see the "?" just curious what is the memory brand of your card? i can't say it, the RX 480 cards i have, but my riser adapter are on the road, i'm still waiting for the Riser. The Test from today was on my old rig root@simpleminer:~/utils# ./atiflash -i
adapter bn dn dID asic flash romsize test bios p/n
======= == == ==== =============== ============== ======= ==== ================
0 01 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
1 02 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
2 03 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
3 05 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
4 06 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
5 07 00 67DF Ellesmere M25P40/c 80000 pass 113-2E353BU.O4I
root@simpleminer:~/utils# amdmeminfo
AMDMemInfo by Zuikkis <zuikkis@gmail.com>
Updated by Yann St.Arnaud <ystarnaud@gmail.com>
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 01:00.0
OpenCL ID: 0
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:01:00.0
Memory type: Micron MT51J256M3
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 02:00.0
OpenCL ID: 1
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:02:00.0
Memory type: Micron MT51J256M3
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 03:00.0
OpenCL ID: 2
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:03:00.0
Memory type: Micron MT51J256M3
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 05:00.0
OpenCL ID: 3
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:05:00.0
Memory type: Micron MT51J256M3
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 06:00.0
OpenCL ID: 4
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:06:00.0
Memory type: Micron MT51J256M3
-----------------------------------
Found card: 1002:67df rev cf (AMD Radeon RX 470)
Bios Version: 113-2E353BU.O4I
PCI: 07:00.0
OpenCL ID: 5
Subvendor: 0x174b
Subdevice: 0xe353
Sysfs Path: /sys/bus/pci/devices/0000:07:00.0
Memory type: Micron MT51J256M3
root@simpleminer:~/utils#
but i collect all infos so i can start if all my hardware are here for my second rig. Backup Firmware from my cards over smOS, edit firmware on my windows pc and flash it back on smOS :-) so that is my plan and i hope it works and i do not brick my cards... Best Regards Willi Hmmmm..... MICRON memory  Let me know if have success on those memory brand. |
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
|
fittsy
|
|
May 31, 2017, 04:08:06 AM |
|
Tytanick,
I would like to suggest we add support in the interface for Claymore EthMan passwords. Version 12.5 of Claymore ZCash and 9.4 of ETH Dual Miner introduced EthMan 3.0.
EthMan 3.0 introduced password security.
Like this:
-mpsw password
This helps add another layer of security. If I add this flag to Claymore config now it throws errors.
Its claymores feature, not mine. If it doest work hen i think you need to report there  Anyway i wont add this to default config as everyone would have the same password If someone want to add, then add it  Thats it You should simply allow us to save a setting for our password. Just like we save settings for miner software. It's not hard. ANYTHING to improve security is important. My #1 fear with smOS is the lack of security. |
|
|
|
willi9974
Legendary
Offline
Activity: 3626
Merit: 2900
Enjoy 500% bonus + 70 FS
|
|
May 31, 2017, 05:32:26 AM |
|
Hmmmm..... MICRON memory Let me know if have success on those memory brand. This is my old Rig and the bios from my rx470er 8GB cards are moded. i have copy the 1500er stripe to the higher ones and it works. Core: 1050 Mem: 1920 Powerstage: 1 Target Temperature ℃: 75 C Fan:30% i get 27-27,5 each card and have 163-165mhs from all cards by 900 watt @wall Any ideas how I can make it better? Regards, Willi |
|
|
|
rovdi
Newbie
Offline
Activity: 6
Merit: 0
|
|
May 31, 2017, 07:49:39 AM |
|
I may have missed the list for special images.
I am installing smOS using this motherboard -- MSI Z270-A-PRO
Any specific RX image that I need to download?
i am using the same board and rx570 GPUs and i can not make more then 4 GPUs work. any suggestions?? |
|
|
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
May 31, 2017, 08:34:18 AM
Last edit: May 31, 2017, 10:35:02 AM by tytanick |
|
UPDATE:WEBSITE TEMPORARY DOWN for few minutes (fo reboot) EDIT: Its up again. EDIT2: There will be another server downtime: OVH is replacing their shitty RAID controllers  EDIT3: OVH intervention will start in a moment EDIT4: OVH component replacement started, lets wait few minutes. EDIT5: OVH ended replacemnt, the website is now up and running.
|
|
|
|
travistylerdurden
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 31, 2017, 08:39:52 AM
Last edit: May 31, 2017, 09:09:10 AM by travistylerdurden |
|
i can only use 1 card https://ibb.co/fpCLDFwhen i plug in 4 card i have this error https://ibb.co/cbqU7ais it can because of riser problem now i can use 2 gpu on motherboard have to i setup in bios? motherboard msi 970a-g43 gpu sapphire rx 480 |
|
|
|
|
|
|
Lumat
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 31, 2017, 12:07:55 PM |
|
Hi,
first of all, thank you for making this happen. I just got into the game (2-3 weeks researching and buying pieces) and started mining with SimpleMining a few days ago. It worked just fine for me at the first attempt, so, well done!
I have been reading through the forum looking for some answers to a couple of questions I have. They have probably already been answered and sorry if I am asking again.
It´s mostly about restarting the machine/rig. I have had a problem 2-3 days ago where my rig (I have 1 at the moment and a second one waiting to be built) just froze and I couldn´t restart the miner and not even the rig. So I had to wait a few hours to go back home e restart it manually.
I have a ¨plug monitor¨ that I can control via Web, so, if I want, I can cut the electricity to the miner and give it back. I wanted to know if there is a way to set the rig to automatically boot when it gets the electricity again.
I have seen the command -r mentioned in some other posts and on claymore but it´s still on the miner and I am not sure if there is the reboot.bat file available.
I have seen that there is the SRR but for 1-2 rig I should be fine. I will probably consider that if and when I get more rigs.
Sorry again if this has already been talked about.
Thanks!
|
|
|
|
|
|
