twofreckles
|
|
September 13, 2017, 08:53:25 AM |
|
So I've been using Dag Fixed image. Some rigs are stable and working pretty nice (only +100 watts consumption comparing to pre epoch thing).
However some rigs run unstable. GPUs seems to be crashing randomly... Doesn't matter what brand (all kind of RX). Lowering clocks and raising voltage doesn't help either. Whenever I go back to old image it works perfectly stable for days. Anyone had a similar problem?
|
|
|
|
kermex529
Newbie
Offline
Activity: 10
Merit: 0
|
|
September 13, 2017, 10:22:05 AM |
|
Hello Dev, Should you create an Alias of miner, open SSH server, create an viewable user to monitor miner in LAN network? My rig is restart several time per day. It may be OC problem, hardware problem (riser,...) power problem. However, by using web interface, I cannot identify which card raise these error. So I prefer to monitor my rig with the output of miner. Manny thanks,
Hi kermex529, I'm just a fellow user here but I think this may help. You can simply ssh into your mining rig from another computer and continuously tail out the log from /root/miner/{directory of the miner you are using}. When your rig eventually reboots, your ssh session will loose connection. Then simply scroll up through your buffer to read the output of what it was last doing just before the reboot. Often one of your GPUs would have dropped to 0 hashes just before the reboot which should help you determine which card to troubleshoot. Thank you very much for help, but I do not know any thing about information of SMOS to do this. There some thing I concern: - to SSH to my rig: which user and password can I use? - the log file in "/root/miner/{directory of the miner you are using}": I'm stupid, but I do not know which directory of miner. I just download the image file from simplemining.net website and flash it to my USB [[16G] and boot my rig from this USB. - I did connect my Monitoring Screen to the onboard-graphic card. From boot the rig, I see some text line and then It hangs the screen (the miner still start normally, I check in simplemining.net web interface). - My rig is 12GPU P106-100, there are not output port of these card. thanksss, I found some help here: https://docs.google.com/document/d/1SvtkI_ZCHAxqbIsaWnuA81hRbI3Tp2Zf3iyEQlORLTU/editlet check it out!
|
|
|
|
blockbasher
Newbie
Offline
Activity: 31
Merit: 0
|
|
September 13, 2017, 12:34:46 PM |
|
So I've been using Dag Fixed image. Some rigs are stable and working pretty nice (only +100 watts consumption comparing to pre epoch thing).
However some rigs run unstable. GPUs seems to be crashing randomly... Doesn't matter what brand (all kind of RX). Lowering clocks and raising voltage doesn't help either. Whenever I go back to old image it works perfectly stable for days. Anyone had a similar problem?
Just curious, how many GPU are you running for +100W after installing DAGfix? I have 12GPU running and having a much larger increase
|
|
|
|
mksmart
Newbie
Offline
Activity: 19
Merit: 0
|
|
September 13, 2017, 01:58:13 PM |
|
anyone use asrock h110 and 13 of 1070 ? my rig crashed several times
|
|
|
|
CMW67
Newbie
Offline
Activity: 4
Merit: 0
|
|
September 13, 2017, 02:30:26 PM |
|
Hi guys, I am trying to run SMOS with my new Vegas 64 (my rx 580 gets recognized), but they do not get recognized, btw. I am currently using the RX SMOS.
I am also getting the error: PCIe Bus Error: severity=corrected, type=Physical Layer, id=00e5(Receiver ID)
Can someone please help me?
Best
CMW
|
|
|
|
twofreckles
|
|
September 13, 2017, 02:31:52 PM |
|
So I've been using Dag Fixed image. Some rigs are stable and working pretty nice (only +100 watts consumption comparing to pre epoch thing).
However some rigs run unstable. GPUs seems to be crashing randomly... Doesn't matter what brand (all kind of RX). Lowering clocks and raising voltage doesn't help either. Whenever I go back to old image it works perfectly stable for days. Anyone had a similar problem?
Just curious, how many GPU are you running for +100W after installing DAGfix? I have 12GPU running and having a much larger increase Plenty. But I got added offset. If you interested in such mod pm me.
|
|
|
|
twofreckles
|
|
September 13, 2017, 02:32:48 PM |
|
What is a command line to mine ETC/ETH with sgminer sg, for some reason I can't get it to work.
|
|
|
|
CryptoDj
Newbie
Offline
Activity: 12
Merit: 0
|
|
September 13, 2017, 04:06:35 PM |
|
anyone use asrock h110 and 13 of 1070 ? my rig crashed several times
Same here, and is totally random, I first thought it was a raiser thing and changed all and is still happening.
|
|
|
|
davemanet
|
|
September 13, 2017, 04:40:18 PM |
|
Hello Dev, Should you create an Alias of miner, open SSH server, create an viewable user to monitor miner in LAN network? My rig is restart several time per day. It may be OC problem, hardware problem (riser,...) power problem. However, by using web interface, I cannot identify which card raise these error. So I prefer to monitor my rig with the output of miner. Manny thanks,
Hi kermex529, I'm just a fellow user here but I think this may help. You can simply ssh into your mining rig from another computer and continuously tail out the log from /root/miner/{directory of the miner you are using}. When your rig eventually reboots, your ssh session will loose connection. Then simply scroll up through your buffer to read the output of what it was last doing just before the reboot. Often one of your GPUs would have dropped to 0 hashes just before the reboot which should help you determine which card to troubleshoot. Yes can you please tell steps on how to? I am wondering as well thanks
|
|
|
|
ledio
Newbie
Offline
Activity: 39
Merit: 0
|
|
September 13, 2017, 04:59:57 PM |
|
+1 I ssh to my rig and what then,i have cursor
|
|
|
|
daupheus
Newbie
Offline
Activity: 37
Merit: 0
|
|
September 13, 2017, 06:23:20 PM |
|
Hi,
can I mix RX 580 & RX VEGA 64 on same rig please ?
|
|
|
|
syauqialbaana
|
|
September 13, 2017, 06:23:51 PM |
|
Is it and how long it will be feeless?
|
|
|
|
Inspector_Cypto
Member
Offline
Activity: 67
Merit: 10
|
|
September 13, 2017, 06:32:42 PM |
|
Hi I'm getting the message "there is no screen to be attached matching miner" on startup and it lags a little sometimes stuck on that. Does anyone else have this or knows how to resolve it? Thank you
|
|
|
|
Saradu
Newbie
Offline
Activity: 16
Merit: 0
|
|
September 13, 2017, 06:53:57 PM |
|
anyone use asrock h110 and 13 of 1070 ? my rig crashed several times
Same here, and is totally random, I first thought it was a raiser thing and changed all and is still happening. Same for me. I moved the rig on a bigger frame 3 days ago and it crashes like 10 time a day eversince. I'll have new risers in 2 days but I' m not sure they are to blame since I'm not the only one having this issue.Strange
|
|
|
|
daupheus
Newbie
Offline
Activity: 37
Merit: 0
|
|
September 13, 2017, 07:03:06 PM |
|
somebody test => simpleminer-RX-v1118-17.30-dagfix.img.zip ?
|
|
|
|
czr
Newbie
Offline
Activity: 27
Merit: 0
|
|
September 13, 2017, 07:06:48 PM |
|
somebody test => simpleminer-RX-v1118-17.30-dagfix.img.zip ?
yes, there are plenty of people inside the forum, you can use search, it works for me on my rx 580s rig, my 470s, on the 580s i got from 26 each card to 29.15 with a 30-50 watts TOTAL increase
|
|
|
|
SuedGrisoni
Newbie
Offline
Activity: 41
Merit: 0
|
|
September 13, 2017, 07:15:48 PM |
|
somebody test => simpleminer-RX-v1118-17.30-dagfix.img.zip ?
yes, there are plenty of people inside the forum, you can use search, it works for me on my rx 580s rig, my 470s, on the 580s i got from 26 each card to 29.15 with a 30-50 watts TOTAL increase Same results here.
|
|
|
|
daupheus
Newbie
Offline
Activity: 37
Merit: 0
|
|
September 13, 2017, 07:16:11 PM |
|
ok thank you
|
|
|
|
alexvachon66
Newbie
Offline
Activity: 11
Merit: 0
|
|
September 13, 2017, 08:18:40 PM |
|
one of my rig with 6 msi amd rx480 still always restart miner , i try anything i could TH: GPU0 18.732 Mh/s, GPU1 18.748 Mh/s, GPU2 18.752 Mh/s, GPU3 0.000 Mh/s, GPU4 18.752 Mh/s, GPU5 18.749 Mh/s GPU0 t=55C fan=27%, GPU1 t=56C fan=27%, GPU2 t=55C fan=27%, GPU3 t=52C fan=27%, GPU4 t=51C fan=27%, GPU5 t=53C fan=27% WATCHDOG: GPU 3 hangs in OpenCL call, exit WATCHDOG: GPU 3 hangs in OpenCL call, exit Binary file (standard input) matches i always have this in the monitor !!! then its restart miner . i have a 3 gpu rig the exact same thing that work properly What can i do i got this problem on every coin i tryed Thanks , hopefully someone can help me
|
|
|
|
Inspector_Cypto
Member
Offline
Activity: 67
Merit: 10
|
|
September 13, 2017, 08:39:39 PM |
|
anyone use asrock h110 and 13 of 1070 ? my rig crashed several times
Same here, and is totally random, I first thought it was a raiser thing and changed all and is still happening. Same for me. I moved the rig on a bigger frame 3 days ago and it crashes like 10 time a day eversince. I'll have new risers in 2 days but I' m not sure they are to blame since I'm not the only one having this issue.Strange That makes 4 of us then. What exactly are your crashing symptoms?
|
|
|
|
|