Cablez
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
November 05, 2013, 12:18:56 AM |
|
Well 0.98.1 did not do it for my dead die even with increasing the temperature to 65deg. Looks like RMA is the only way to get 500+ hashing. Will post how it goes.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
xyzzy099
Legendary
Offline
Activity: 1066
Merit: 1098
|
|
November 05, 2013, 12:27:13 AM |
|
Decentralization is important. Possessing powerful machines, you all have a role. Like it or not. And what you do can affect the network.
Why is it that there are those that seem terrified of me telling you this?
I will let each of you come to your own conclusion, but there is certainly nothing to be gained arguing about it.
Let me try to abate my terror in the face of your message long enough to thank you for blessing the forum with your condescending collectivist ideology. Bitcoin will survive with or without you, and regardless of whether you ever find your flock to collectively save those of us who are terrified by you, or just too stupid to comprehend the magnificence of your magnanimity in offering to lead us to salvation.
|
Libertarians: Diligently plotting to take over the world and leave you alone.
|
|
|
CoinHoarder
Legendary
Offline
Activity: 1484
Merit: 1026
In Cryptocoins I Trust
|
|
November 05, 2013, 12:30:21 AM |
|
HOLY MOTHER! The 0.98.1 firmware is the boss! Good job KnC for pushing the units faster and faster!
My unit is going TO DA MOON! ┗(°0°)┛
Can someone please link me to the new firmware? I can't find it anywhere... it's not where the other firmware links are on KNC's support page.
|
|
|
|
xyzzy099
Legendary
Offline
Activity: 1066
Merit: 1098
|
|
November 05, 2013, 12:31:46 AM |
|
HOLY MOTHER! The 0.98.1 firmware is the boss! Good job KnC for pushing the units faster and faster!
My unit is going TO DA MOON! ┗(°0°)┛
Can someone please link me to the new firmware? I can't find it anywhere... it's not where the other firmware links are on KNC's support page. http://www.kncminer.com/userfiles/file/kncminer-0.98.1.bin
|
Libertarians: Diligently plotting to take over the world and leave you alone.
|
|
|
ASIC-K
Sr. Member
Offline
Activity: 280
Merit: 250
Hell?
|
|
November 05, 2013, 12:36:13 AM |
|
HOLY MOTHER! The 0.98.1 firmware is the boss! Good job KnC for pushing the units faster and faster!
My unit is going TO DA MOON! ┗(°0°)┛
Can someone please link me to the new firmware? I can't find it anywhere... it's not where the other firmware links are on KNC's support page. you didn't look very hard, did you? lol knc news page.
|
|
|
|
CoinHoarder
Legendary
Offline
Activity: 1484
Merit: 1026
In Cryptocoins I Trust
|
|
November 05, 2013, 12:38:25 AM |
|
HOLY MOTHER! The 0.98.1 firmware is the boss! Good job KnC for pushing the units faster and faster!
My unit is going TO DA MOON! ┗(°0°)┛
Can someone please link me to the new firmware? I can't find it anywhere... it's not where the other firmware links are on KNC's support page. you didn't look very hard, did you? lol knc news page. Well... that's what I get for skimming the news post. I had read it, but I skipped the part where it linked to the new firmware. Thanks xyzzy099 !!!!
|
|
|
|
jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
|
November 05, 2013, 12:44:16 AM |
|
mine not as good as 0.98
|
|
|
|
Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
|
November 05, 2013, 12:44:43 AM |
|
it's not, the beta was explicitly to address die zero, but anyone can apply, 9.8.1 production - there's some minor improvements, but Phoenix your boxes are happy as they are... AAAWwwww..Cmon' O'rama.... You know, that I know, that you know I know that you know, that Ewok spends countless hours tweaking for perfection... So when a firmware comes out talking about improvements.... Ewok will waste no time tryin'!!! So when you refer to yourself in the 3rd person, you give yourself a nickname? Creepy! Lol. My Aussie partners call me that...it stuck....lol BTW...ASIC-K... Me too, 0.98.1 Beta seems faster. period.
|
|
|
|
eiliant
Member
Offline
Activity: 84
Merit: 10
|
|
November 05, 2013, 01:13:21 AM |
|
Is this the longest page in Custom Hardware?
|
|
|
|
DPoS
|
|
November 05, 2013, 01:18:17 AM |
|
Is this the longest page in Custom Hardware?
Swedish ASIC miner company kncminer.com « 1 2 ... 999 1000 » kncminer 19981 555747 Last post Today at 01:13:21 AM by eiliant OFFICIAL TerraHash Thread (Klondike/Avalon Assembly US) New « 1 2 ... 254 255 » terrahash 5099 167734 Last post November 04, 2013, 07:02:25 PM by atomicchaos
|
|
|
|
CoinHoarder
Legendary
Offline
Activity: 1484
Merit: 1026
In Cryptocoins I Trust
|
|
November 05, 2013, 01:20:15 AM |
|
Unfortunately the new firmware did nothing for me. Not surprised though, I don't think new firmware will fix this:
Analyzing start-up log... Ok Starting ASIC boards test... InitA started in ASIC TEST MODE BBB S/N: A335BNLT0A604013911463 LM75 OK. Temperature = 25.5°C TPS65217 OK. Modification A, revision 1.2 Testing ASIC board #0... Map: FF FF FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Die #0 failed Testing ASIC board #1... No board found Testing ASIC board #2... Map: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 All dies Ok Testing ASIC board #3... Map: FF FF FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 Die #0 failed Testing ASIC board #4... Map: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 All dies Ok Testing ASIC board #5... No board found
(I have a Jupiter running at only 450 Gh)
|
|
|
|
DimensionsOfHell
|
|
November 05, 2013, 01:23:57 AM Last edit: November 05, 2013, 01:59:09 AM by DimensionsOfHell |
|
Well 0.98.1 did not do it for my dead die even with increasing the temperature to 65deg. Looks like RMA is the only way to get 500+ hashing. Will post how it goes.
I have the same issue; the new fw didn't fix the problem. Try getting the temp to 83-85c(max) and let it stay for a minute or two. Make sure you are constantly monitoring the temp. Make sure to use the BertMod 0.3 so that you can tell when the VRMs kick back in. You'll see the output go from 0A -0.37A to 46A+ As soon as all the VRMs are on, let it cool back down SLOWLY (you gotta play around with the airflow.) Let the temp sit above 70c. Do it ONLY for the bad board. If the temp drops below 70c (at least for me, for other it has been as low as 65c), the VRM will shut off again. I have two bad VRMs on one of my boards. I have the front fan, the heatsink fan, and a rear exhaust fan for my good unit. For the bad one, I only have the front fan on (heatsink fan off, rear exhaust fan off), and I have a small piece of folded paper in the way to stop some of the airflow hitting the VRM. EDIT: Seems I came to be the first on the 1000th page, so I'll just post this here
|
|
|
|
timmmers
|
|
November 05, 2013, 01:24:19 AM |
|
Got this email today. Hi, We would like to remind you that order 4114 is ready for pickup at below location: KnCMIner Birger Jarlsgatan 33 111 45 Stockholm Should you have any further questions please do not hesitate to contact us. Thanks Emilia Got to wonder how that happened when it's been sitting here for a week. Was never a pickup either. lol I should go get it.
|
|
|
|
timmmers
|
|
November 05, 2013, 01:27:27 AM |
|
Is this the longest page in Custom Hardware?
Doesn't surprise me, it's about the only thread with a load of customers who actually have a rig delivered to talk about. Best of a bad lot really. At least they delivered even if they messed a lot of stuff up...most seem to fail that step.
|
|
|
|
|
Phinnaeus Gage
Legendary
Offline
Activity: 1918
Merit: 1570
Bitcoin: An Idea Worth Spending
|
|
November 05, 2013, 01:50:05 AM |
|
Damn! Lost on betsofbitcoin, betting that Bitcoin would hit $1,000 USD before this thread hits 1,000 pages. Maybe Luke can help me find a loophole. Fake Edit: Found one! USD was not stated so I'm claiming it was for CNY. ~TMIBITW
|
|
|
|
Mogumodz
|
|
November 05, 2013, 01:58:21 AM |
|
Snipped image
Damn! Lost on betsofbitcoin, betting that Bitcoin would hit $1,000 USD before this thread hits 1,000 pages. Maybe Luke can help me find a loophole. Fake Edit: Found one! USD was not stated so I'm claiming it was for CNY. ~TMIBITW lol, ouch. One thing I would love is this thread to slow down, I'm almost considering hiring someone to read me the posts in Morgan Freemans voice.
|
|
|
|
xstr8guy
|
|
November 05, 2013, 02:14:31 AM |
|
Snipped image
Damn! Lost on betsofbitcoin, betting that Bitcoin would hit $1,000 USD before this thread hits 1,000 pages. Maybe Luke can help me find a loophole. Fake Edit: Found one! USD was not stated so I'm claiming it was for CNY. ~TMIBITW lol, ouch. One thing I would love is this thread to slow down, I'm almost considering hiring someone to read me the posts in Morgan Freemans voice. Just hire Morgan Freeman himself. It appears that he won't turn down any job and will narrate just about anything these days.
|
|
|
|
MrHempstock
Full Member
Offline
Activity: 140
Merit: 100
"Don't worry. My career died after Batman, too."
|
|
November 05, 2013, 02:39:03 AM |
|
Snipped image
Damn! Lost on betsofbitcoin, betting that Bitcoin would hit $1,000 USD before this thread hits 1,000 pages. Maybe Luke can help me find a loophole. Fake Edit: Found one! USD was not stated so I'm claiming it was for CNY. ~TMIBITW lol, ouch. One thing I would love is this thread to slow down, I'm almost considering hiring someone to read me the posts in Morgan Freemans voice. Just hire Morgan Freeman himself. It appears that he won't turn down any job and will narrate just about anything these days. Except Robot Chicken , but then they found a white guy who does a better Morgan Freeman than Morgan Freeman.
|
BTCitcointalk 1%ers manipulate the currency and deceive its user community.
|
|
|
OmegaNemesis28
|
|
November 05, 2013, 03:44:56 AM |
|
My Mercury is running 138 GH/s~, worth updating to 0.9.8 from 0.9.6?
|
|
|
|
|