DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 12, 2012, 11:51:33 AM |
|
hmm this is strange, after i restarted the miner it has no cpu usage in the beginning, but an increased memory usage of 118 mb and 115 mb. After like 3 minutes the 5850 Miner was again at 25% cpu usage.
i also noticed that it was the diablo miner for the 5850 who was using 25% cpu usage and the 7870 was at 0%.
But as i was starting both up, i noticed that at the 5850 there is an line "BFI_INT patching enable ...." and on the 7870 it isnt.
this is my starting the D1 is the 7870
start DiabloMiner-Windows.exe -o localhost -r 9332 -D 1 -f 120 start DiabloMiner-Windows.exe -o localhost -r 9332 -D 2 -f 1
EDIT: chaning the f 1 to f 10 did the trick!
thanks for your help guys!
Theres most of your problem. Windows has a false CPU usage reading bug when programs sleep for very long times while interacting with device APIs. DiabloMiner wasn't actually using that much CPU time.
|
|
|
|
typhoon
Newbie
Offline
Activity: 22
Merit: 0
|
|
May 14, 2012, 11:09:09 AM |
|
Just reporting in that after I upgraded to the latest DiabloMiner, on both my Windows and Linux machines the miner starts as usual.. adding the devices and then hashing away.. However, shares are never submitted. I walked away for a while and saw that in fact no shares had been submitted to eligius. For proof check out: http://eligius.st/~artefact2/7/1AXiiwR4aYktPKMBMsZaP1untDgN9T8FfXEdit: Found an older DiabloMiner and reverted (it does not include the 2 latest commits), back to mining.
|
|
|
|
DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 14, 2012, 11:48:58 AM |
|
Just reporting in that after I upgraded to the latest DiabloMiner, on both my Windows and Linux machines the miner starts as usual.. adding the devices and then hashing away.. However, shares are never submitted. I walked away for a while and saw that in fact no shares had been submitted to eligius. For proof check out: http://eligius.st/~artefact2/7/1AXiiwR4aYktPKMBMsZaP1untDgN9T8FfXEdit: Found an older DiabloMiner and reverted (it does not include the 2 latest commits), back to mining. I cannot reproduce that bug. BTW, I've dropped OpenCL 1.0 support, so if you're on SDK 2.1... don't do that. DM is supposed to detect if you're on 1.0 and refuse to use those devices, too. Well, assuming I coded that test right.
|
|
|
|
typhoon
Newbie
Offline
Activity: 22
Merit: 0
|
|
May 14, 2012, 10:14:23 PM Last edit: May 14, 2012, 10:31:29 PM by typhoon |
|
Just reporting in that after I upgraded to the latest DiabloMiner, on both my Windows and Linux machines the miner starts as usual.. adding the devices and then hashing away.. However, shares are never submitted. I walked away for a while and saw that in fact no shares had been submitted to eligius. For proof check out: http://eligius.st/~artefact2/7/1AXiiwR4aYktPKMBMsZaP1untDgN9T8FfXEdit: Found an older DiabloMiner and reverted (it does not include the 2 latest commits), back to mining. I cannot reproduce that bug. BTW, I've dropped OpenCL 1.0 support, so if you're on SDK 2.1... don't do that. DM is supposed to detect if you're on 1.0 and refuse to use those devices, too. Well, assuming I coded that test right. I am on Catalyst 12.4 and the SDK that is included with the drivers. Radeon 5870s/5850s in both boxes (CentOS/Windows 7). If there is anything I can do to help you possibly pinpoint the problem I am all ears. Basically diablominer adds the OpenCL devices then starts hashing away at only god knows what.. and never submits shares, all whilst hashing at full speed and making my GPUs waste energy.
|
|
|
|
DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 14, 2012, 10:33:58 PM |
|
Just reporting in that after I upgraded to the latest DiabloMiner, on both my Windows and Linux machines the miner starts as usual.. adding the devices and then hashing away.. However, shares are never submitted. I walked away for a while and saw that in fact no shares had been submitted to eligius. For proof check out: http://eligius.st/~artefact2/7/1AXiiwR4aYktPKMBMsZaP1untDgN9T8FfXEdit: Found an older DiabloMiner and reverted (it does not include the 2 latest commits), back to mining. I cannot reproduce that bug. BTW, I've dropped OpenCL 1.0 support, so if you're on SDK 2.1... don't do that. DM is supposed to detect if you're on 1.0 and refuse to use those devices, too. Well, assuming I coded that test right. I am on Catalyst 12.4 and the SDK that is included with the drivers. Radeon 5870s/5850s in both boxes (CentOS/Windows 7). If there is anything I can do to help you possibly pinpoint the problem I am all ears. Basically diablominer adds the OpenCL devices then starts hashing away at only god knows what.. and never submits shares, all whilst hashing at full speed and making my GPUs waste energy. The hash meter has a number above zero, right? I'm wondering if Windows has a driver bug that Linux doesn't, because I'm on Linux /w Catalyst 12.4 using the runtime that comes with the drivers, and I can't reproduce it.
|
|
|
|
typhoon
Newbie
Offline
Activity: 22
Merit: 0
|
|
May 14, 2012, 10:57:25 PM |
|
Just reporting in that after I upgraded to the latest DiabloMiner, on both my Windows and Linux machines the miner starts as usual.. adding the devices and then hashing away.. However, shares are never submitted. I walked away for a while and saw that in fact no shares had been submitted to eligius. For proof check out: http://eligius.st/~artefact2/7/1AXiiwR4aYktPKMBMsZaP1untDgN9T8FfXEdit: Found an older DiabloMiner and reverted (it does not include the 2 latest commits), back to mining. I cannot reproduce that bug. BTW, I've dropped OpenCL 1.0 support, so if you're on SDK 2.1... don't do that. DM is supposed to detect if you're on 1.0 and refuse to use those devices, too. Well, assuming I coded that test right. I am on Catalyst 12.4 and the SDK that is included with the drivers. Radeon 5870s/5850s in both boxes (CentOS/Windows 7). If there is anything I can do to help you possibly pinpoint the problem I am all ears. Basically diablominer adds the OpenCL devices then starts hashing away at only god knows what.. and never submits shares, all whilst hashing at full speed and making my GPUs waste energy. The hash meter has a number above zero, right? I'm wondering if Windows has a driver bug that Linux doesn't, because I'm on Linux /w Catalyst 12.4 using the runtime that comes with the drivers, and I can't reproduce it. Yes the hashrate is at full speed, causing 100% gpu usage on all gpus. This happens on 2 separate systems, both with catalyst 12.4 and the included sdk. One system is windows and one is linux (CentOS).
|
|
|
|
DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 14, 2012, 11:04:17 PM |
|
Just reporting in that after I upgraded to the latest DiabloMiner, on both my Windows and Linux machines the miner starts as usual.. adding the devices and then hashing away.. However, shares are never submitted. I walked away for a while and saw that in fact no shares had been submitted to eligius. For proof check out: http://eligius.st/~artefact2/7/1AXiiwR4aYktPKMBMsZaP1untDgN9T8FfXEdit: Found an older DiabloMiner and reverted (it does not include the 2 latest commits), back to mining. I cannot reproduce that bug. BTW, I've dropped OpenCL 1.0 support, so if you're on SDK 2.1... don't do that. DM is supposed to detect if you're on 1.0 and refuse to use those devices, too. Well, assuming I coded that test right. I am on Catalyst 12.4 and the SDK that is included with the drivers. Radeon 5870s/5850s in both boxes (CentOS/Windows 7). If there is anything I can do to help you possibly pinpoint the problem I am all ears. Basically diablominer adds the OpenCL devices then starts hashing away at only god knows what.. and never submits shares, all whilst hashing at full speed and making my GPUs waste energy. The hash meter has a number above zero, right? I'm wondering if Windows has a driver bug that Linux doesn't, because I'm on Linux /w Catalyst 12.4 using the runtime that comes with the drivers, and I can't reproduce it. Yes the hashrate is at full speed, causing 100% gpu usage on all gpus. This happens on 2 separate systems, both with catalyst 12.4 and the included sdk. One system is windows and one is linux (CentOS). Thats extra weird. I'm going to have to think about this one for a bit. It doesn't make sense you have the bug and I don't... I wonder if its hardware related, because I'm on a 7970, not a 58xx.
|
|
|
|
earthsound
Newbie
Offline
Activity: 16
Merit: 0
|
|
May 18, 2012, 10:30:58 PM |
|
Just reporting in that after I upgraded to the latest DiabloMiner, on both my Windows and Linux machines the miner starts as usual.. adding the devices and then hashing away.. However, shares are never submitted. I walked away for a while and saw that in fact no shares had been submitted to eligius. For proof check out: http://eligius.st/~artefact2/7/1AXiiwR4aYktPKMBMsZaP1untDgN9T8FfXEdit: Found an older DiabloMiner and reverted (it does not include the 2 latest commits), back to mining. I cannot reproduce that bug. BTW, I've dropped OpenCL 1.0 support, so if you're on SDK 2.1... don't do that. DM is supposed to detect if you're on 1.0 and refuse to use those devices, too. Well, assuming I coded that test right. I am on Catalyst 12.4 and the SDK that is included with the drivers. Radeon 5870s/5850s in both boxes (CentOS/Windows 7). If there is anything I can do to help you possibly pinpoint the problem I am all ears. Basically diablominer adds the OpenCL devices then starts hashing away at only god knows what.. and never submits shares, all whilst hashing at full speed and making my GPUs waste energy. The hash meter has a number above zero, right? I'm wondering if Windows has a driver bug that Linux doesn't, because I'm on Linux /w Catalyst 12.4 using the runtime that comes with the drivers, and I can't reproduce it. Yes the hashrate is at full speed, causing 100% gpu usage on all gpus. This happens on 2 separate systems, both with catalyst 12.4 and the included sdk. One system is windows and one is linux (CentOS). Thats extra weird. I'm going to have to think about this one for a bit. It doesn't make sense you have the bug and I don't... I wonder if its hardware related, because I'm on a 7970, not a 58xx. This may be unrelated to typhoon's problem, but the latest version of diablominer fails to submit to and/or connect to the mining pool I've been using. I'm running on 2011 iMacs, running OS X 10.7.4, with AMD Radeon HD 6750M (512 MB of RAM) and Apple OpenCL 1.1 (Apr 9 2012 19:41:45). The command line arguments I'm using include: ./DiabloMiner-OSX.sh -w 64 -v 2 -na The May 2012 version outputs the following: [5/18/12 10:19:36 AM] Started [5/18/12 10:19:36 AM] Connecting to: http://mining.eligius.st:8337/ [5/18/12 10:19:36 AM] Using Apple OpenCL 1.1 (Apr 9 2012 19:41:45) [5/18/12 10:19:37 AM] Added ATI Radeon HD 6750M (#1) (6 CU, local work size of 64) [5/18/12 10:29:40 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out [5/18/12 10:31:59 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out [5/18/12 10:38:21 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out mhash: 61.0/57.2 | accept: 0 | reject: 0 | hw error: 0 The March 2012 version outputs the following: [5/18/12 2:09:31 PM] Started [5/18/12 2:09:31 PM] Connecting to: http://mining.eligius.st:8337/ [5/18/12 2:09:31 PM] Using Apple OpenCL 1.1 (Apr 9 2012 19:41:45) [5/18/12 2:09:32 PM] Added ATI Radeon HD 6750M (#1) (6 CU, local work size of 64) [5/18/12 2:09:53 PM] mining.eligius.st accepted block 1 from ATI Radeon HD 6750M (#1) [5/18/12 2:13:39 PM] mining.eligius.st accepted block 2 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:23 PM] mining.eligius.st accepted block 3 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:36 PM] mining.eligius.st accepted block 4 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:54 PM] mining.eligius.st accepted block 5 from ATI Radeon HD 6750M (#1) mhash: 58.9/59.3 | accept: 5 | reject: 0 | hw error: 0 Are there any options I can use to give more verbose messages? On an unrelated note, I've recently noticed this model iMac go down to ~50-60 mhash/s from a previously consistent ~70 mhash/s. Could this be related to May's change(s) or the latest Lion update from Apple?
|
|
|
|
DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 18, 2012, 11:24:13 PM |
|
Just reporting in that after I upgraded to the latest DiabloMiner, on both my Windows and Linux machines the miner starts as usual.. adding the devices and then hashing away.. However, shares are never submitted. I walked away for a while and saw that in fact no shares had been submitted to eligius. For proof check out: http://eligius.st/~artefact2/7/1AXiiwR4aYktPKMBMsZaP1untDgN9T8FfXEdit: Found an older DiabloMiner and reverted (it does not include the 2 latest commits), back to mining. I cannot reproduce that bug. BTW, I've dropped OpenCL 1.0 support, so if you're on SDK 2.1... don't do that. DM is supposed to detect if you're on 1.0 and refuse to use those devices, too. Well, assuming I coded that test right. I am on Catalyst 12.4 and the SDK that is included with the drivers. Radeon 5870s/5850s in both boxes (CentOS/Windows 7). If there is anything I can do to help you possibly pinpoint the problem I am all ears. Basically diablominer adds the OpenCL devices then starts hashing away at only god knows what.. and never submits shares, all whilst hashing at full speed and making my GPUs waste energy. The hash meter has a number above zero, right? I'm wondering if Windows has a driver bug that Linux doesn't, because I'm on Linux /w Catalyst 12.4 using the runtime that comes with the drivers, and I can't reproduce it. Yes the hashrate is at full speed, causing 100% gpu usage on all gpus. This happens on 2 separate systems, both with catalyst 12.4 and the included sdk. One system is windows and one is linux (CentOS). Thats extra weird. I'm going to have to think about this one for a bit. It doesn't make sense you have the bug and I don't... I wonder if its hardware related, because I'm on a 7970, not a 58xx. This may be unrelated to typhoon's problem, but the latest version of diablominer fails to submit to and/or connect to the mining pool I've been using. I'm running on 2011 iMacs, running OS X 10.7.4, with AMD Radeon HD 6750M (512 MB of RAM) and Apple OpenCL 1.1 (Apr 9 2012 19:41:45). The command line arguments I'm using include: ./DiabloMiner-OSX.sh -w 64 -v 2 -na The May 2012 version outputs the following: [5/18/12 10:19:36 AM] Started [5/18/12 10:19:36 AM] Connecting to: http://mining.eligius.st:8337/ [5/18/12 10:19:36 AM] Using Apple OpenCL 1.1 (Apr 9 2012 19:41:45) [5/18/12 10:19:37 AM] Added ATI Radeon HD 6750M (#1) (6 CU, local work size of 64) [5/18/12 10:29:40 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out [5/18/12 10:31:59 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out [5/18/12 10:38:21 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out mhash: 61.0/57.2 | accept: 0 | reject: 0 | hw error: 0 The March 2012 version outputs the following: [5/18/12 2:09:31 PM] Started [5/18/12 2:09:31 PM] Connecting to: http://mining.eligius.st:8337/ [5/18/12 2:09:31 PM] Using Apple OpenCL 1.1 (Apr 9 2012 19:41:45) [5/18/12 2:09:32 PM] Added ATI Radeon HD 6750M (#1) (6 CU, local work size of 64) [5/18/12 2:09:53 PM] mining.eligius.st accepted block 1 from ATI Radeon HD 6750M (#1) [5/18/12 2:13:39 PM] mining.eligius.st accepted block 2 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:23 PM] mining.eligius.st accepted block 3 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:36 PM] mining.eligius.st accepted block 4 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:54 PM] mining.eligius.st accepted block 5 from ATI Radeon HD 6750M (#1) mhash: 58.9/59.3 | accept: 5 | reject: 0 | hw error: 0 Are there any options I can use to give more verbose messages? On an unrelated note, I've recently noticed this model iMac go down to ~50-60 mhash/s from a previously consistent ~70 mhash/s. Could this be related to May's change(s) or the latest Lion update from Apple? Try a different pool. I have not changed anything that involves pools at all as far as I know. This has been largely the removal of code, not the changing of it. As for OSX, its probably a Lion update. Quite a few Mac users have bitched that every time OSX puts a new update out, OpenCL apps get slower.
|
|
|
|
despoiler
Member
Offline
Activity: 94
Merit: 10
|
|
May 19, 2012, 02:16:15 PM |
|
What's with the double spaced lines of output in this new version? I personally don't like it.
|
|
|
|
earthsound
Newbie
Offline
Activity: 16
Merit: 0
|
|
May 19, 2012, 06:21:41 PM |
|
This may be unrelated to typhoon's problem, but the latest version of diablominer fails to submit to and/or connect to the mining pool I've been using. I'm running on 2011 iMacs, running OS X 10.7.4, with AMD Radeon HD 6750M (512 MB of RAM) and Apple OpenCL 1.1 (Apr 9 2012 19:41:45). The command line arguments I'm using include: ./DiabloMiner-OSX.sh -w 64 -v 2 -na The May 2012 version outputs the following: [5/18/12 10:19:36 AM] Started [5/18/12 10:19:36 AM] Connecting to: http://mining.eligius.st:8337/ [5/18/12 10:19:36 AM] Using Apple OpenCL 1.1 (Apr 9 2012 19:41:45) [5/18/12 10:19:37 AM] Added ATI Radeon HD 6750M (#1) (6 CU, local work size of 64) [5/18/12 10:29:40 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out [5/18/12 10:31:59 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out [5/18/12 10:38:21 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out mhash: 61.0/57.2 | accept: 0 | reject: 0 | hw error: 0 The March 2012 version outputs the following: [5/18/12 2:09:31 PM] Started [5/18/12 2:09:31 PM] Connecting to: http://mining.eligius.st:8337/ [5/18/12 2:09:31 PM] Using Apple OpenCL 1.1 (Apr 9 2012 19:41:45) [5/18/12 2:09:32 PM] Added ATI Radeon HD 6750M (#1) (6 CU, local work size of 64) [5/18/12 2:09:53 PM] mining.eligius.st accepted block 1 from ATI Radeon HD 6750M (#1) [5/18/12 2:13:39 PM] mining.eligius.st accepted block 2 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:23 PM] mining.eligius.st accepted block 3 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:36 PM] mining.eligius.st accepted block 4 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:54 PM] mining.eligius.st accepted block 5 from ATI Radeon HD 6750M (#1) mhash: 58.9/59.3 | accept: 5 | reject: 0 | hw error: 0 Are there any options I can use to give more verbose messages? On an unrelated note, I've recently noticed this model iMac go down to ~50-60 mhash/s from a previously consistent ~70 mhash/s. Could this be related to May's change(s) or the latest Lion update from Apple? Try a different pool. I have not changed anything that involves pools at all as far as I know. This has been largely the removal of code, not the changing of it. As for OSX, its probably a Lion update. Quite a few Mac users have bitched that every time OSX puts a new update out, OpenCL apps get slower. Unfortunately, I'm seeing the exact same problem on four different iMacs (all of the same model, OS version, etc.) regardless of whether the firewall is on/off. The only difference between it working and not is whether I run the March or May version. Although I don't know much about the getwork protocol, eventually the March diablominer receives a response from the pool like the following (which I understand to mean that the work was accepted): HTTP/1.1 200 OK Content-Length: 40 X-Roll-NTime: expire=120 X-Long-Polling: /LP Server: Eloipool Date: Sat, 19 May 2012 17:15:11 GMT Content-Type: application/json
{"result": true, "id": 1, "error": null} As the result of sending a non-empty "params":[] value. Whereas the May diablominer only receives new blocks after POSTing the following {"method":"getwork","params":[],"id":1} I sniffed the May diablominer with wireshark for twenty minutes and never saw a non-empty "params" value sent. The old one sends one every minute to few minutes. I'm not sure how else to troubleshoot this. Have any of the command line options changed (--url being the only other one I use that I didn't already mention)? I suppose I could try another pool, but the only variable here seems to be the newer version.
|
|
|
|
DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 19, 2012, 06:50:24 PM |
|
What's with the double spaced lines of output in this new version? I personally don't like it.
Sounds like your terminal isn't quite wide enough.
|
|
|
|
DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 19, 2012, 06:54:49 PM |
|
This may be unrelated to typhoon's problem, but the latest version of diablominer fails to submit to and/or connect to the mining pool I've been using. I'm running on 2011 iMacs, running OS X 10.7.4, with AMD Radeon HD 6750M (512 MB of RAM) and Apple OpenCL 1.1 (Apr 9 2012 19:41:45). The command line arguments I'm using include: ./DiabloMiner-OSX.sh -w 64 -v 2 -na The May 2012 version outputs the following: [5/18/12 10:19:36 AM] Started [5/18/12 10:19:36 AM] Connecting to: http://mining.eligius.st:8337/ [5/18/12 10:19:36 AM] Using Apple OpenCL 1.1 (Apr 9 2012 19:41:45) [5/18/12 10:19:37 AM] Added ATI Radeon HD 6750M (#1) (6 CU, local work size of 64) [5/18/12 10:29:40 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out [5/18/12 10:31:59 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out [5/18/12 10:38:21 AM] ERROR: Cannot connect to mining.eligius.st: Read timed out mhash: 61.0/57.2 | accept: 0 | reject: 0 | hw error: 0 The March 2012 version outputs the following: [5/18/12 2:09:31 PM] Started [5/18/12 2:09:31 PM] Connecting to: http://mining.eligius.st:8337/ [5/18/12 2:09:31 PM] Using Apple OpenCL 1.1 (Apr 9 2012 19:41:45) [5/18/12 2:09:32 PM] Added ATI Radeon HD 6750M (#1) (6 CU, local work size of 64) [5/18/12 2:09:53 PM] mining.eligius.st accepted block 1 from ATI Radeon HD 6750M (#1) [5/18/12 2:13:39 PM] mining.eligius.st accepted block 2 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:23 PM] mining.eligius.st accepted block 3 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:36 PM] mining.eligius.st accepted block 4 from ATI Radeon HD 6750M (#1) [5/18/12 2:15:54 PM] mining.eligius.st accepted block 5 from ATI Radeon HD 6750M (#1) mhash: 58.9/59.3 | accept: 5 | reject: 0 | hw error: 0 Are there any options I can use to give more verbose messages? On an unrelated note, I've recently noticed this model iMac go down to ~50-60 mhash/s from a previously consistent ~70 mhash/s. Could this be related to May's change(s) or the latest Lion update from Apple? Try a different pool. I have not changed anything that involves pools at all as far as I know. This has been largely the removal of code, not the changing of it. As for OSX, its probably a Lion update. Quite a few Mac users have bitched that every time OSX puts a new update out, OpenCL apps get slower. Unfortunately, I'm seeing the exact same problem on four different iMacs (all of the same model, OS version, etc.) regardless of whether the firewall is on/off. The only difference between it working and not is whether I run the March or May version. Although I don't know much about the getwork protocol, eventually the March diablominer receives a response from the pool like the following (which I understand to mean that the work was accepted): HTTP/1.1 200 OK Content-Length: 40 X-Roll-NTime: expire=120 X-Long-Polling: /LP Server: Eloipool Date: Sat, 19 May 2012 17:15:11 GMT Content-Type: application/json
{"result": true, "id": 1, "error": null} As the result of sending a non-empty "params":[] value. Whereas the May diablominer only receives new blocks after POSTing the following {"method":"getwork","params":[],"id":1} I sniffed the May diablominer with wireshark for twenty minutes and never saw a non-empty "params" value sent. The old one sends one every minute to few minutes. I'm not sure how else to troubleshoot this. Have any of the command line options changed (--url being the only other one I use that I didn't already mention)? I suppose I could try another pool, but the only variable here seems to be the newer version. eligius uses its own pool software that no other pool uses. Its very well possible that it isn't interacting well with a newer version of Jackson... but I upgraded that back in January. I wonder whats going on, it doesn't make sense.
|
|
|
|
despoiler
Member
Offline
Activity: 94
Merit: 10
|
|
May 20, 2012, 05:14:40 AM |
|
What's with the double spaced lines of output in this new version? I personally don't like it.
Sounds like your terminal isn't quite wide enough. The default size? Yah no.
|
|
|
|
DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 20, 2012, 06:09:40 AM |
|
What's with the double spaced lines of output in this new version? I personally don't like it.
Sounds like your terminal isn't quite wide enough. The default size? Yah no. DM's console code is _very_ dumb. If output is double spaced or otherwise garbled, make your terminal wider until it stops.
|
|
|
|
DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 22, 2012, 08:23:16 PM |
|
Update: Everyone effected by the problem, try the new build.
|
|
|
|
DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 23, 2012, 02:53:48 PM |
|
Someone has confirmed the new build fixed it.
|
|
|
|
Joshwaa
|
|
May 23, 2012, 03:11:47 PM |
|
For me it is now double spacing instead of triple spacing.
|
|
|
|
DiabloD3 (OP)
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
|
May 23, 2012, 03:16:42 PM |
|
For me it is now double spacing instead of triple spacing.
That wasn't the bug I was talking about. That can only be fixed by going back and time and shooting whoever invented the UNIX console: DURR HURR LETS MAKE A VIRTUAL ON SCREEN TYPEWRITER, NO ONE WILL EVER KNOW
|
|
|
|
earthsound
Newbie
Offline
Activity: 16
Merit: 0
|
|
May 24, 2012, 01:31:19 PM |
|
Update: Everyone effected by the problem, try the new build.
The new build works well, thanks! What was the issue? Side note: I can now use a worksize of either 128 or 256 on OS X 10.7.4 and notice a small increase in hashrate over -w 64. May be worth mentioning in the OP instructions. I assume it's because of (one of?) the OpenCL updates Apple has pushed out.
|
|
|
|
|