crypticj
|
|
May 31, 2017, 02:01:08 PM |
|
Tytanick before you take down simplemining for maintenance can you please give us headsup Post something like it would be coming down for maintenance etc in 60-90min i was restarting rig etc for different settings and now I am stuck and can't use it until servers come back online.
I had incorrect settings and all my rigs were rebooting and they rebooted with wrong settings.
|
|
|
|
sefo
Newbie
Offline
Activity: 45
Merit: 0
|
|
May 31, 2017, 02:05:23 PM |
|
Why is "claymore eth+sia" option suddenly "not recommended"? What is the recommended way to dual mine them then?
You can just use the regular Claymore 9.4 miner and add arguments to mine SIA. That's what I've done from the beginning since I don't want to use dwarfpool. Well, I tried copying settings from "claymore eth+sia" to "claymore-eth-v9.4", but it did not mine Sia at all. Can you share your settings? Do 1130 core 1800 mem Youll mine at 25eth 500sia with good temps I didn't mean clock settings, but parameters for Claymore.
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
May 31, 2017, 02:31:11 PM |
|
Right now there are some problems between cloudflare -> OVH. The ovh DDos is not working properly. I am waiting for theirs reponse.
|
|
|
|
usmarine2141
Newbie
Offline
Activity: 18
Merit: 0
|
|
May 31, 2017, 02:32:42 PM |
|
yes please. the deposit function is broke this is the error i get. There was an error, please report it to admin@simplemining.net if you see it: Error: Too many errors in the last two minutes from 147.135.225.225 - please fix your code and try again... but it does generate the payment link after the fact, but clicking on it redirects back to the status page.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 31, 2017, 02:34:26 PM Last edit: May 31, 2017, 03:28:26 PM by citronick |
|
I see that the account balance now appears on the dashboard - Nice!
I have 3 separate emails to manage groups of rigs doing ETH, ZEC and Multi-Algo.
I will consolidate all my rigs into one account when the grouping feature is ready.
When is the ETA for the "grouping" feature?
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
icmanik
Newbie
Offline
Activity: 39
Merit: 0
|
|
May 31, 2017, 02:53:33 PM |
|
yes please. the deposit function is broke this is the error i get. There was an error, please report it to admin@simplemining.net if you see it: Error: Too many errors in the last two minutes from 147.135.225.225 - please fix your code and try again... but it does generate the payment link after the fact, but clicking on it redirects back to the status page. I have the same issue as well. How can I deposit If payment system doesn't work?
|
|
|
|
Ther0byte
Newbie
Offline
Activity: 5
Merit: 0
|
|
May 31, 2017, 02:55:28 PM |
|
UPDATE:WEBSITE TEMPORARY DOWN for few minutes (fo reboot) EDIT: Its up again. EDIT2: There will be another server downtime: OVH is replacing their shitty RAID controllers EDIT3: OVH intervention will start in a moment EDIT4: OVH component replacement started, lets wait few minutes. EDIT5: OVH ended replacemnt, the website is now up and running. Great. Tytanick i have an issue, the website doesn't allow me to make the payment on my second account (in the meantime that you will add the mining groups). The first time i tried worked like a charm, back when you opened the payment but now it simply does nothing. Any ETA on the fix ?
|
|
|
|
ailikun
|
|
May 31, 2017, 03:07:37 PM |
|
Hi, im currently using an as rock z270 extreme4 motherboard, and there seem to be some lan problems. Is there a way to fix it? Any special images needed to be downloaded? the motherboard has this lan chipset Onboard LAN LAN Chipset Intel I219-V
|
Komuto Herovato is definitely the chief engineer of bfl)
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
May 31, 2017, 03:31:53 PM |
|
UPDATE:Hi There is too much payments at once due to my newsletter. If you have problem paying now, try again later or tomorrow
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 31, 2017, 03:51:53 PM |
|
UPDATE:Hi There is too much payments at once due to my newsletter. If you have problem paying now, try again later or tomorrow Rigs Grouping feature ETA?
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
May 31, 2017, 04:17:20 PM |
|
UPDATE:Hi There is too much payments at once due to my newsletter. If you have problem paying now, try again later or tomorrow I cannot pay because the system is overloaded, but I do not want my rigs to stop running. How much of a grace period is there before they turn off or something?
|
|
|
|
SuedGrisoni
Newbie
Offline
Activity: 41
Merit: 0
|
|
May 31, 2017, 04:25:41 PM |
|
Hello how are you?
I saw that the administrator no longer recommends version 8.1 of Claymore that I used to mine Eth + Sia.
Could you please help me with the command I should put in Claymore v9.4 to mine these two coins together?
Currently I use DwarfPool (Eth) and SiaMining (Sia) and I am 3 days trying to make it work, without success.
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
May 31, 2017, 04:45:13 PM |
|
I cannot pay because the system is overloaded, but I do not want my rigs to stop running. How much of a grace period is there before they turn off or something?
Dont worry, just pay when you can Before i disable anything i will let people know. So again, dont wory but be honest also ! <- This is for all users
|
|
|
|
vg54dett
|
|
May 31, 2017, 05:10:54 PM |
|
Hello
I have a trouble when trying SMos with 6x RX570 4b Pulse. Anything higher than 3 GPUs get one GPU hang after few minutes.
I tried everything, MB swap , Risers swap , GPU swap , ultra low clocks , low intensity... I can't find the problem cause.
It seems to be working only when there is 3 GPUs plugged. 4 , 5 or 6 get one of them hang after few minutes. (Claymore Eth mining as much as zec mining)
I think this is something wrong between SMos and these RX570.
Could you help me guys ? Anything special to do ? (the GPUs are brand new and not modded)
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
May 31, 2017, 05:12:44 PM |
|
Hello
I have a trouble when trying SMos with 6x RX570 4b Pulse. Anything higher than 3 GPUs get one GPU hang after few minutes.
I tried everything, MB swap , Risers swap , GPU swap , ultra low clocks , low intensity... I can't find the problem cause.
It seems to be working only when there is 3 GPUs plugged. 4 , 5 or 6 get one of them hang after few minutes. (Claymore Eth mining as much as zec mining)
I think this is something wrong between SMos and these RX570.
Could you help me guys ? Anything special to do ? (the GPUs are brand new and not modded)
Try those settings: 1) Make sure you're running the latest BIOS! 2) Enable 4G 3) Set PCIe support to "Auto" - DO NOT MANUALLY SET TO GEN1. THIS CAUSES MAJOR ISSUES 4) Enable onboard graphics startup as first! I believe this is changing "PEG" to "IGD" or something in the Advanced BIOS 5) Plug your monitor into the ONBOARD graphics
|
|
|
|
tribollo
Newbie
Offline
Activity: 7
Merit: 0
|
|
May 31, 2017, 05:36:24 PM |
|
Hey guys im using SMos and this OS is very nice, but i dont think its working well on ETH with my R9 280x's.I only gert 13 mh/s on each gpu. can Someone Help me ?
|
|
|
|
SealTx
Newbie
Offline
Activity: 55
Merit: 0
|
|
May 31, 2017, 05:48:24 PM |
|
Why is "claymore eth+sia" option suddenly "not recommended"? What is the recommended way to dual mine them then?
You can just use the regular Claymore 9.4 miner and add arguments to mine SIA. That's what I've done from the beginning since I don't want to use dwarfpool. Well, I tried copying settings from "claymore eth+sia" to "claymore-eth-v9.4", but it did not mine Sia at all. Can you share your settings? Hello how are you?
I saw that the administrator no longer recommends version 8.1 of Claymore that I used to mine Eth + Sia.
Could you please help me with the command I should put in Claymore v9.4 to mine these two coins together?
Currently I use DwarfPool (Eth) and SiaMining (Sia) and I am 3 days trying to make it work, without success.
Try this... it works for me: -wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -dpool stratum+tcp://siamining.com -dwal $walletSC/$rigName -dcoin sia -dpsw x -dcri 16 -mport -3333 -allpools 1 -allcoins 1
...you might try to increase the -dcri value to get the max Sia speed without reducing your Ether mining speed.
|
|
|
|
crypticj
|
|
May 31, 2017, 06:30:50 PM |
|
I can also confirm sent payment didn't go thru went thru my account just fine. Than the payment system timed out and 3 hours later it said you will get refund claim your refund and charged me funds back for refunding.
I will wait till tomorrow to deposit in my account again.
|
|
|
|
SuedGrisoni
Newbie
Offline
Activity: 41
Merit: 0
|
|
May 31, 2017, 06:35:22 PM |
|
Why is "claymore eth+sia" option suddenly "not recommended"? What is the recommended way to dual mine them then?
You can just use the regular Claymore 9.4 miner and add arguments to mine SIA. That's what I've done from the beginning since I don't want to use dwarfpool. Well, I tried copying settings from "claymore eth+sia" to "claymore-eth-v9.4", but it did not mine Sia at all. Can you share your settings? Hello how are you?
I saw that the administrator no longer recommends version 8.1 of Claymore that I used to mine Eth + Sia.
Could you please help me with the command I should put in Claymore v9.4 to mine these two coins together?
Currently I use DwarfPool (Eth) and SiaMining (Sia) and I am 3 days trying to make it work, without success.
Try this... it works for me: -wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -dpool stratum+tcp://siamining.com -dwal $walletSC/$rigName -dcoin sia -dpsw x -dcri 16 -mport -3333 -allpools 1 -allcoins 1
...you might try to increase the -dcri value to get the max Sia speed without reducing your Ether mining speed. I would also like to be changing my pool, I would like to go to ethermine, can you tell me if it is only to change "eth-eu.dwarfpool.com" to "us1.ethermine.org:4444" will it work?
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
May 31, 2017, 06:51:54 PM Last edit: May 31, 2017, 08:17:13 PM by tytanick |
|
UPDATE: Everybody received 0,5$ as free trial. If you like my simplemining.net and you are using it, please deposit some $. The fee is 2$ per rig per month.
Rig grouping must be in this new month so within 30 days i guess.
|
|
|
|
|