[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[Saradu]

Hi. I set  Core MHz:    1375,1375,1200,1200,1200,1200
            Memory MHz: 2150,2150,1990,1990,1990,1990 ,
but on dashboard I have:
            Core MHz:     1375 1375 1035 1200 1035 1200 (4)
            Memory MHz: 2150 2150 1990 1990 1990 1990
Any ideas why? Thanks

Someone?

[o00o]

I can't seem to be able to boot from a pendrive on Gigabyte H110-D3A with above 4G decoding enabled on the Nvidia platform.  I'm fairly convinced this is due to Etcher converting to MBR instead of GPT.  Any input would be greatly appreciated.
 

[ATCkit]

I can't seem to be able to boot from a pendrive on Gigabyte H110-D3A with above 4G decoding enabled on the Nvidia platform.  I'm fairly convinced this is due to Etcher converting to MBR instead of GPT.  Any input would be greatly appreciated.
 

Maybe you missed a step in the BIOS setup for your MoBo. I know I did and had to do it again.
 Check under " How to Set BIOS for Mining ?" In this link:

https://www.gigabyte.com/microsite/462/mining.html

[joaocha]

I got some problem booting An 30 gb SDD , there is any tip?

[Yupp82]

Hi all.
few months everything was good. The other day there was a problem. 2 mine a threshing barn were gone from the RigList list. They work, spheres are sent, but they aren't in the list!!!
now there it is written - No matching records found.
at the same time with peep of "Rig Groups" 2/2 are specified

It lasts already couple of days.
I have checked a config.txt, my mail, all is correct there.

Same to me. Someone repair that?

[yatta]

Stupid question.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.

[jackbox]

Stupid question.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.

Turn on UNSAFE mode.

[Rcalin]

Hello people,
I did all instructed to setup simplemining, everything is working until i connected the 6 gpu's(gtx 1080 ti). I get error at beggining: Cannot ioremap video memory.

Then, after like 1 minute of writing "There is no screen to be attached matching miner", i get next errors: http://i63.tinypic.com/efqdz8.jpg.

Someone suggested to reflash the OS?

Thank you!

[czr]

http://download.simplemining.net/simpleminer-RX-v1118-kernel4.11-16.60-noae[Suspicious link removed]g.zip 22-Aug-2017

??

theres a sept 1st version.... chedk http://download.simplemining.net, everything works good that version

[jonny51]

oh boy, your website is so f*** slow man. We pay alot of money, please get yourself some decent servers... its almost ridiculous..

[yatta]

Lol, what a lot of money?

[yatta]

Stupid question.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.

Turn on UNSAFE mode.

Thx, worked like a charm

[ne0x86]

Just simple question about indentify GPUs

gpu0 is always monitor-gpu and after that (gpu1,gpu2,gpu3 etc..) PCIE order?

[rig4hodlers]

HI, I've tested the 2 DAGFIX versions located at SMOS download section for my x6 RX 580 8Gb pulse hynix memory and every card has a different hashrate between 18 Mh/s and 28 Mh/s, it's always moving the Mh/s and I finally lose 20 Mh/h between them. It doesn't work for me, anyone has the same cards and its works? Any idea about when the final amd drivers will be released? I get 25.4 Mh/s in dualmining for each card. Thanks.

[ysakay]

Just simple question about indentify GPUs

gpu0 is always monitor-gpu and after that (gpu1,gpu2,gpu3 etc..) PCIE order?

All right.

[boisterousstalk]

Stupid question.
How to burn img to ssd drive - connected via usb adapter.
Ether does not see it, neither rufus.

Turn on UNSAFE mode.

Thx, worked like a charm

this really helped me too, thanks.

[jdash]

can SMOS individually setup core for each cards ?

for p106 ? i was trying it, i find it not working.

[RfBTC]

XMR !!! PLEASE

I have tried many times for XMR, but no luck.

I use RX570.

Anyone please guide me how to set up XMR mining, SMOS, and pool that pay it into a Poloniex wallet.

Hello i am mining XMR  on SMOS  with   sgminer-gm-5.5.5   

x6 RX570 - MSI Gaming X TwinFrozr , and getting 4.400 H/s  ( 733 H/s per card)

Someone with RX570  has tested DAG fix for ETH and work out it in stable way ?

[buithanhtung]

Dashboard update v3018
added Rig Grouping feature - now you can create group of rigs with different miner and options
added info for how many days will your positive balance last
added notes field near every rig and group in which you can write anything you want
disabled anoying captcha and replaced by cloudflare rate limiting
modified Nvidia OC fields - now you can use negative values to underclock and syntax like: -100,-8,50,40
fix in console view

How to add rigs to new group:
https://www.youtube.com/watch?v=IA7WbcSJZSk

Update v1124
little fix for registering new rigs

Hi tytanick,

There maybe an issue with R9 new version. I see my R9 rigs OFF everytime in SMOS but still ON in flypool

• In SMOS:
  https://preview.ibb.co/eMdfKF/r9_rigs_off.png
  
• In Flypool:
  https://preview.ibb.co/jdVMRv/r9_rigs_on.png
  

[davemanet]

anyone else having issues?  i'm having error "Socket was closed remotely" and 0 hash.