With the new results out from spondoolies, below is the updated Hardware comparison chart/document.
Thank you for the reference.
From my admittedly biased position I'd say the average Nep is 3.4T at a squink below 2kW.
Completely stock PARTS and tuned gets ya to 3.5T @ 2kW.
3.55-3.58T is doable with some added airflow, same 2kW @ wall BTW.
(the gains are lower errors not faster clocks)
To accurately compare would require seperating 110VAC from 220VAC PSU.
Also need to take into account PSU efficiency and it's % loading.
Ideally all units tested on same PSU.
Next would be all units mesured under 'hopefully' similar conditions.
Next would be at least reporting the conditions during measurement.
The reality is we don't have the luxury.
The boxes are or should be too busy hashing to stop for ideal testing.
I have no idea what 'average' is but I have better numbers.
I am also under the impression from posted 'Advanced' pages that my numbers are not ununual.
Repeating, I know I have a biased opinion so take this post as just that, OPINION.
I'd say 3.4 @ 2kw is very common for typical customers.
My numbers for reference,
https://bitcointalk.org/index.php?topic=170332.msg8053504#msg8053504Please note, I don't think your collection is biased, just that my opinion must be as I own one.
Very well done long term effort!!!
I appreciate your contribution.
Thank you for your time.
YMMV