hatch789
|
|
July 27, 2017, 07:10:40 PM |
|
Hey Guys,
I searched this thread and tried to figure out how to see or show the main (1bash) terminal window from the local desktop, but from a putty or remote SSH session. I'd like to see this terminal integrated as a SCREEN just like the others. There are times it's critical for me to see this information and understand what's going on, but when I'm remote I have no access to that particular terminal screen.
It also appears to be the way to KILL or STOP the mining process in an emergency if I'm having a problem. I am sometimes doing some things on the system to test various options and maybe I don't want the miner running while I'm doing said tests. Access to this local main (1bash) terminal would be key.
Suggestions welcome!
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
July 28, 2017, 04:59:10 AM |
|
Hey Guys,
I searched this thread and tried to figure out how to see or show the main (1bash) terminal window from the local desktop, but from a putty or remote SSH session. I'd like to see this terminal integrated as a SCREEN just like the others. There are times it's critical for me to see this information and understand what's going on, but when I'm remote I have no access to that particular terminal screen.
It also appears to be the way to KILL or STOP the mining process in an emergency if I'm having a problem. I am sometimes doing some things on the system to test various options and maybe I don't want the miner running while I'm doing said tests. Access to this local main (1bash) terminal would be key.
Suggestions welcome!
If you are using the bug fix 1bash and files To stop everything: then: to start after stopping everything:
|
|
|
|
Racooma
Newbie
Offline
Activity: 50
Merit: 0
|
|
July 28, 2017, 06:12:49 AM |
|
Is this better than CUDA zcash miner?
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
July 28, 2017, 09:17:29 AM |
|
Hello guys,
Any of you mining Pascal Lite? If so can you please share your PASL coin code part from oneBash (would prefer DUAL though), would like to create an account with PASL.
Tried with accounts.pascallite.com, but don't have any PASL on Cryptopia to buy (it just costs 0.05 PASL though), so want to try pasl.fairpool.xyz as they said they will give an account if I mine with my public wallet key for 12.25 PASL.
I've tried to edit and add on my oneBash, it does nothing but crashing/hanging my RIG.
Thanks in advance.
&&
Would also like to share my stable OC settings with ASUS DUAL 1060 6GB.
cc : -100; mc: 1100; pl : 90W
giving me 170MH for ETHASH and 200MH for LBC (dcri-40)
Hope it help some new users trying for stable OC, also happy to get some advice if I can increase the yield.
Thanks and good luck with our mining.
Hail fullZero for creating and expanding this OS with amazing support.
Long live CRYPTO & fullZero...
|
|
|
|
ivoldemar
Newbie
Offline
Activity: 23
Merit: 0
|
|
July 28, 2017, 10:15:31 AM |
|
Let me send you access to the rig. There are 13 cards, test how much it will fit in UPDATE: Bug Fix you did to make P106 run fine, but here in Xorg to add at least coolbits forgot like .... and why then I have only 10 cards there, instead of 13. I tried to edit, all to register. But after the restart, nvoc restored its xorg. http://Http://prntscr.com/g102c9I hope that after reading, you will quickly send a fix version. It looks like you are using integrated graphics in this xorg.conf Please connect the display to the primary GPU (one in the 16x slot) and reboot. Close the 1bash process when it starts; before it tries to reboot. Open the xorg.conf and copy all the contents by copying the text (ctrl + a then ctrl +c) and pasting them in a new file you make on the desktop or home folder. then Please post the contents of that file here. This will help me make an xorg.conf . Hello! I connected cards with a monitor in x16. The system started without error and the miner started. Copied Xorg, but it's the same as without a card with an active monitor. I installed your bug fix before that and the system began to start without errors. Xorg - https://yadi.sk/d/3_2ODI8C3LVbZ8
|
|
|
|
car1999
|
|
July 28, 2017, 11:54:06 AM |
|
fullzero, is it possible to use the hidden disk spaces? My usb key is 32GB, but I cannot see all of them in nvOC: m1@m1-desktop:~$ df -h Filesystem Size Used Avail Use% Mounted on udev 1.9G 0 1.9G 0% /dev tmpfs 392M 12M 380M 3% /run /dev/sda2 15G 13G 920M 94% / tmpfs 2.0G 192K 2.0G 1% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup tmpfs 392M 56K 392M 1% /run/user/1000 /dev/sda1 8.9M 60K 8.8M 1% /media/m1/1263-A96E
|
|
|
|
shony78
Newbie
Offline
Activity: 5
Merit: 0
|
|
July 28, 2017, 11:59:52 AM |
|
I was getting 5570 KH/s with a single EVGA 1050ti SC; not sure what my OC settings were on that image. What model 1050ti do you have? 1050ti gives around 10mh only with ccminer sp mod2 or 3. As I understood sp makes releases only for windows.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
July 28, 2017, 01:00:13 PM |
|
Is this better than CUDA zcash miner?
I am not sure what you are referring to. I am also not familiar with 'CUDA zcash miner'. Maybe another member knows.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
July 28, 2017, 01:03:49 PM |
|
fullzero, is it possible to use the hidden disk spaces? My usb key is 32GB, but I cannot see all of them in nvOC: m1@m1-desktop:~$ df -h Filesystem Size Used Avail Use% Mounted on udev 1.9G 0 1.9G 0% /dev tmpfs 392M 12M 380M 3% /run /dev/sda2 15G 13G 920M 94% / tmpfs 2.0G 192K 2.0G 1% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup tmpfs 392M 56K 392M 1% /run/user/1000 /dev/sda1 8.9M 60K 8.8M 1% /media/m1/1263-A96E
You can extend the primary partition on any key / ssd; by connecting it to a computer with nvOC that has already booted and clicking the ubuntu launcher at the top left and typing then click Gparted. Find the sdb drive select the larger partition; it it is mounted unmount it; then rightclick and select resize and set the max size. click the green checkmark to execute the change, wait for completion and it should be ~17gb larger. Also you can remove unused header files with this oneliner from _Parallax_: sudo apt-get purge $(dpkg -l linux-{image,headers}-"[0-9]*" | awk '/ii/{print $2}' | grep -ve "$(uname -r | sed -r 's/-[a-z]+//')")
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
July 28, 2017, 01:11:04 PM |
|
I was getting 5570 KH/s with a single EVGA 1050ti SC; not sure what my OC settings were on that image. What model 1050ti do you have? 1050ti gives around 10mh only with ccminer sp mod2 or 3. As I understood sp makes releases only for windows. Windows and Linux builds of ccminer are very similar (almost the same). It would make sense for sp to make a linux client with a fee like claymore or ewbf and provide it for free. I would add it to nvOC; and I'm sure a lot of members would use it.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
July 28, 2017, 01:30:23 PM |
|
Let me send you access to the rig. There are 13 cards, test how much it will fit in UPDATE: Bug Fix you did to make P106 run fine, but here in Xorg to add at least coolbits forgot like .... and why then I have only 10 cards there, instead of 13. I tried to edit, all to register. But after the restart, nvoc restored its xorg. http://Http://prntscr.com/g102c9I hope that after reading, you will quickly send a fix version. It looks like you are using integrated graphics in this xorg.conf Please connect the display to the primary GPU (one in the 16x slot) and reboot. Close the 1bash process when it starts; before it tries to reboot. Open the xorg.conf and copy all the contents by copying the text (ctrl + a then ctrl +c) and pasting them in a new file you make on the desktop or home folder. then Please post the contents of that file here. This will help me make an xorg.conf . Hello! I connected cards with a monitor in x16. The system started without error and the miner started. Copied Xorg, but it's the same as without a card with an active monitor. I installed your bug fix before that and the system began to start without errors. Xorg - https://yadi.sk/d/3_2ODI8C3LVbZ8 try this xorg.conf: https://drive.google.com/file/d/0B3ra23kLdr5lM0VkWkZHVTZyVGc/view?usp=sharingextract it to your home folder then open guake and enter the cmd: sudo cp '/home/m1/xorg.conf' '/etc/X11/xorg.conf' then logout and log back in the xorg.conf pcie addressing in the example you listed looks very strange so I'm not sure if this will work. Let me know.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
July 28, 2017, 01:41:17 PM |
|
WARNING:
If you have BTC at coinbase:
Transfer it to a wallet with private key access asap.
Coinbase is going to keep the BCC side of the likely fork.
Yesterday they sent an email 'explaining' they will not provide users with the BCC fork coins from BTC held at coinbase should the expected fork occur.
This is a legal theft of Billions of dollars from their users; most of whom lack the knowledge to understand they are being scammed.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
July 28, 2017, 01:54:24 PM |
|
Thats one big warning and abuse of font size - LOL - jokes aside...
I have emptied my Coinbase account 2 days ago, and will be using another provider that's supports both chains, updated and backed-up Core wallet, moved BTC to cash, ETH, DASH and LTC; and moved the stash to Trezor.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
OverEasy
|
|
July 28, 2017, 06:10:19 PM |
|
Yup emptied my Coinbase, Bittrex and everything else a week ago. Export all private keys after moving back to chain
|
|
|
|
|
OverEasy
|
|
July 28, 2017, 07:03:19 PM |
|
TPccminer is failing.
[2017-07-28 14:56:44] Starting on stratum+tcp://sigt.suprnova.cc:7106 [2017-07-28 14:56:44] NVML GPU monitoring enabled. [2017-07-28 14:56:44] 5 miner threads started, using 'skunk' algorithm. Illegal instruction
I followed all instructions. I copied over new files you provided. Do I need to compile again?
Now I got all AMD rigs on SGminer and SIGT I am stuck on what I thought was the easy one! The Nvidia rig! jeez
|
|
|
|
darklow
Newbie
Offline
Activity: 16
Merit: 0
|
|
July 28, 2017, 08:26:00 PM |
|
fullzero thanks for such a great and handy os for mining, real timesaver.
Currently mining SIGT with 1070 and having around 19-19.75 MH/s per card (100 COC, 1300 MOC, 125 PW, intensity 20). Tried different settings, tweaked to 20MH/s, but it wasn't stable, so this is where I stopped.
One question: Sometimes miner still crashes and I don't see the reason, screen is just getting terminated and I just see that miner restarts. Is there any log file where I could see reason for last termination. Thanks.
BTW yesterday I contacted sp too about signatum ccminer mod, I was ready to pay him 0.05 BTC for mod, but unfortunately he said he makes only mod for windows. Maybe someone can convince him there is quite big audience for him if he makes linux version.
|
|
|
|
fk1
|
|
July 28, 2017, 11:15:39 PM Last edit: July 29, 2017, 02:05:14 AM by fk1 |
|
Hi,
I got a gainward 1060 today and it is the first card that ignores the power-limit out of 8 cards (gigabyte, asus) wether I set it by bash or nvidia-smi. ie. sucks 100w/80w. card damaged?
still using v0017
btw: any planned date for v0019? I much appretiate this OS!
best regards
|
|
|
|
darklow
Newbie
Offline
Activity: 16
Merit: 0
|
|
July 29, 2017, 01:16:39 AM |
|
TPccminer is failing.
[2017-07-28 14:56:44] Starting on stratum+tcp://sigt.suprnova.cc:7106 [2017-07-28 14:56:44] NVML GPU monitoring enabled. [2017-07-28 14:56:44] 5 miner threads started, using 'skunk' algorithm. Illegal instruction
I followed all instructions. I copied over new files you provided. Do I need to compile again?
Now I got all AMD rigs on SGminer and SIGT I am stuck on what I thought was the easy one! The Nvidia rig! jeez
I did following and it worked for me: 1) I downloaded "v2 Alexis78 and Tpuvot 2.2 ccminer clients" from page 1 link and extracted as instructions (dirname) says. 2) I followed instructions in this post https://bitcointalk.org/index.php?topic=1854250.msg20411710#msg20411710 and run chmod and added "COIN="SIGT" and rest of the code to end of the 1bash file... " It worked perfectly, no compile needed.
|
|
|
|
jlbaseball11
Newbie
Offline
Activity: 66
Merit: 0
|
|
July 29, 2017, 01:59:34 AM |
|
After reading the ccminer readme.txt I just noticed that DMD and ZCOIN had the wrong algo commands in onebash: DMD = dmd-gr ZCOIN = lyra2 zNot that anyone is mining these anymore
|
|
|
|
|