BigHashMiner
Member
Offline
Activity: 106
Merit: 10
|
|
August 03, 2017, 09:59:53 PM |
|
bah, no support. no use.
|
|
|
|
car1999
|
|
August 04, 2017, 03:54:19 AM |
|
is it safe to change the password of m1? i need A stronger password to put my rigs into IDC.
|
|
|
|
dbolivar
Member
Offline
Activity: 119
Merit: 10
|
|
August 04, 2017, 04:55:42 AM |
|
is it safe to change the password of m1? i need A stronger password to put my rigs into IDC.
Yes, I do it as soon as it boots the first time. No issues.
|
|
|
|
dbolivar
Member
Offline
Activity: 119
Merit: 10
|
|
August 04, 2017, 05:03:58 AM |
|
A tip for those of you who are having issues with risers: don't forget to also check the cables. One of my GPUs was giving very low hashrates, sometimes resetting (with kernel messages like "GPU has fallen off the bus"), and only after I replaced the cable it worked (and of course it was the last thing I tried, lol). I think some cables are not properly assembled, introducing noise or even bad connection.
|
|
|
|
jimmykl
|
|
August 04, 2017, 05:21:32 AM |
|
bah, no support. no use.
So you expect the dev to never take a break from work and be available 24/7 to support a product they provide free for the community?
|
|
|
|
Bibi187
Full Member
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
|
August 04, 2017, 07:54:13 AM |
|
bah, no support. no use.
And this one is FREE OF CHARGE, like no one else with this level of setting on the market ... Anyway we dont need user like you oO
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
August 04, 2017, 12:57:16 PM |
|
Google Drive link is broken. Mega trying to force me to buy subscription. Can someone upload last version somewhere?
|
|
|
|
hwlgraka
Newbie
Offline
Activity: 8
Merit: 0
|
|
August 04, 2017, 02:15:26 PM |
|
Hello, first I want to say thank you very much for the amount of effort and work that you put into this software image. I am also using v0018, but unfortunately the fan speed is not set correctly (I want to set it to 100%). I have modified the following values in the script: MANUAL_FAN="YES" FAN_SPEED=100 TARGET_TEMP_0=60 TARGET_TEMP_1=60 TARGET_TEMP_2=60 TARGET_TEMP_3=60 TARGET_TEMP_4=60 ALLOWED_TEMP_DIFF=10
Additionally I can see upon startup, that nvidia-cli is setting the fan speed correctly. But however, Claymore is only showing a fan speed of 50%. Furthermore, the temperature is 70 C°, which states that the max temperature setting in the script is also not working as intended. My hardware: MB: Asrock Z170 Pro 4 GPU: 5x MSI GTX 1050Ti Thanks very much in advance. Kind regards.
|
|
|
|
VoskCoin
|
|
August 04, 2017, 02:55:13 PM |
|
Does bumping fan speed to 100 effect power usage much if really at all? Only negative is noise? Maybe more wear and tear?
|
|
|
|
VoskCoin
|
|
August 04, 2017, 02:56:32 PM |
|
bah, no support. no use.
And this one is FREE OF CHARGE, like no one else with this level of setting on the market ... Anyway we dont need user like you oO Full zero is phenomenal and surely overwhelmed, have some respect
|
|
|
|
hwlgraka
Newbie
Offline
Activity: 8
Merit: 0
|
|
August 04, 2017, 02:59:36 PM |
|
Does bumping fan speed to 100 effect power usage much if really at all? Only negative is noise? Maybe more wear and tear?
Sorry but that's not really related to my question. It's no problem how loud the graphic cards are, they should just run at 100%. The cooler the card, the longer the lifespan. And at the moments in the room I really need them to run at 100%. They get 70 degree at 50% which is too much.
|
|
|
|
VoskCoin
|
|
August 04, 2017, 03:00:24 PM |
|
Does bumping fan speed to 100 effect power usage much if really at all? Only negative is noise? Maybe more wear and tear?
Sorry but that's not really related to my question. It's no problem how loud the graphic cards are, they should just run at 100%. The cooler the card, the longer the lifespan. And at the moments in the room I really need them to run at 100%. They get 70 degree at 50% which is too much. I don't have the answer to your question yours just prompted mine xD
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
August 04, 2017, 04:13:26 PM |
|
Does bumping fan speed to 100 effect power usage much if really at all? Only negative is noise? Maybe more wear and tear?
Sorry but that's not really related to my question. It's no problem how loud the graphic cards are, they should just run at 100%. The cooler the card, the longer the lifespan. And at the moments in the room I really need them to run at 100%. They get 70 degree at 50% which is too much. I don't have the answer to your question yours just prompted mine xD Has this option been disabled?? Maxximus007_AUTO_TEMPERATURE_CONTROL="NO" & SET MANUAL_FAN="YES" FAN_SPEED=85 ?? If not try this, I would suggest (from my experience going through this forum) not to run fans on 100%, try between 85-90 and see how it goes.
|
|
|
|
lards
Newbie
Offline
Activity: 50
Merit: 0
|
|
August 04, 2017, 04:57:19 PM |
|
Hi guys, has anyone tried to use this OS with P106-100 mining cards without video output as I keep getting "XORG FAIL" error and the system reboots. After that it just shows :
error: unknown filesystem grab rescue>
Does this happen because the monitor is connected to the motherboard since I do not have any video output available, can I maybe edit the xorg.conf file to get rid of this error?
Would be very thankful for any help, been trying to work this out for 3 days now...
|
|
|
|
fogcity
Newbie
Offline
Activity: 11
Merit: 0
|
|
August 04, 2017, 05:01:55 PM |
|
Hello all --
I'm using v0018 with 6x nvidia 1070s and all is fine. I was just wondering --- How long will my GPUs last running 24/7 ?
Does anyone have an idea or enough rig history to know?
Regards !!!
|
|
|
|
ATCkit
|
|
August 04, 2017, 05:59:17 PM |
|
Anyone know how to set up Mining Pool hub in 1 Bash? My attempts have failed
Here's one example:
MUSIC_WORKER="nv$IP_AS_WORKER" MUSIC_ADDRESS="ATCkit9" MUSIC_POOL="us-east.ethash-hub.miningpoolhub.com:20585" MUSIC_EXTENTION_ARGUMENTS=""
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
August 04, 2017, 06:08:52 PM |
|
Anyone know how to set up Mining Pool hub in 1 Bash? My attempts have failed
Here's one example:
MUSIC_WORKER="nv$IP_AS_WORKER" MUSIC_ADDRESS="ATCkit9" MUSIC_POOL="us-east.ethash-hub.miningpoolhub.com:20585" MUSIC_EXTENTION_ARGUMENTS=""
Are you just mining MUSIC or DUAL_MUSIC_XXX?? Let me know this, i will give you the code to work it out.
|
|
|
|
Nexillus
|
|
August 04, 2017, 06:50:01 PM |
|
Google Drive link is broken. Mega trying to force me to buy subscription. Can someone upload last version somewhere?
Here you go! Here is the link to the V0018 zip.
https://drive.google.com/open?id=0ByJXLZMdXVX5TVpnVGxWQmhTZFk
Also the SH256 hash (same as on the front page from Fullzero)9c81574cdd515103cc7a331c3bfdbe5dd94ef10574c227ec9b81cb581a1049f4
|
|
|
|
Nexillus
|
|
August 04, 2017, 06:51:32 PM |
|
Hello all --
I'm using v0018 with 6x nvidia 1070s and all is fine. I was just wondering --- How long will my GPUs last running 24/7 ?
Does anyone have an idea or enough rig history to know?
Regards !!!
I have two rigs go almost 3 weeks 24/7. Only one has done a soft reset in which the miner reset and started back up. The second rig hasn't even had a soft reset in the three weeks.
|
|
|
|
dbolivar
Member
Offline
Activity: 119
Merit: 10
|
|
August 04, 2017, 07:13:24 PM |
|
Hi guys, has anyone tried to use this OS with P106-100 mining cards without video output as I keep getting "XORG FAIL" error and the system reboots. After that it just shows :
error: unknown filesystem grab rescue>
Does this happen because the monitor is connected to the motherboard since I do not have any video output available, can I maybe edit the xorg.conf file to get rid of this error?
Would be very thankful for any help, been trying to work this out for 3 days now...
For the Xorg error, I'm not sure, but I guess that you need at least one GPU with video output, and that GPU should be connected to the first PCIe slot (closest to the CPU). At least that's what every Linux mining howto says. Regarding the Grub error, it seems like a corrupted USB stick, since it's not even able to load the kernel. I'd suggest reflashing nvOC, and/or trying a different USB stick.
|
|
|
|
|