dandreark1
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 145
Merit: 100
out here
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 07:19:36 PM |
|
Ey mate any chance you're thinking about adding skunkhash raptor algo into v19?
|
|
|
|
fogcity
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 10:27:18 PM |
|
Hello all --
I'm using v0018 with 6x nvidia 1070s and all is fine. I was just wondering --- How long will my GPUs last running 24/7 ?
Does anyone have an idea or enough rig history to know?
Regards !!!
I have two rigs go almost 3 weeks 24/7. Only one has done a soft reset in which the miner reset and started back up. The second rig hasn't even had a soft reset in the three weeks. That's cool but that's not what I'm trying to ask. I'm wondering if after a solid year or two will my GPUs break down and require replacement? Regards!
|
|
|
|
philipma1957
Legendary
Online
Activity: 4242
Merit: 8497
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 11:36:53 PM |
|
Hello all --
I'm using v0018 with 6x nvidia 1070s and all is fine. I was just wondering --- How long will my GPUs last running 24/7 ?
Does anyone have an idea or enough rig history to know?
Regards !!!
I have used cards 2 years then sold them . So if you are lucky 2 years is a good rule of thumb. depends on the pedal to the metal or just cruising mind set. I am gentle with my cards and they last. I posted today because I found a killer usb stick http://www.ebay.com/itm/Lexar-64GB-JumpDrive-P20-USB-3-0-Flash-Drive-Speed-Up-to-400MB-s-LJDP20-64GCRB/381906408887?I am going to do a build with it soon. it should be good enough to allow me to run the linux very easily. as a os along with mine 3 1080 ti's I will post back on sunday or monday once build is done.
|
|
|
|
ATCkit
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 02:17:52 AM |
|
Anyone know how to set up Mining Pool hub in 1 Bash? My attempts have failed
Here's one example:
MUSIC_WORKER="nv$IP_AS_WORKER" MUSIC_ADDRESS="ATCkit9" MUSIC_POOL="us-east.ethash-hub.miningpoolhub.com:20585" MUSIC_EXTENTION_ARGUMENTS=""
Are you just mining MUSIC or DUAL_MUSIC_XXX?? Let me know this, i will give you the code to work it out. I`m mining single coins only. With my AMD rig, I switch coins manually about once a day. MUSIC will be one of the coins I watch on What to mine. In short, if you can show me what works for MUSIC, I can apply the logic for the other coins MPH offers.
|
|
|
|
VoskCoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 03:29:16 AM |
|
Ey mate any chance you're thinking about adding skunkhash raptor algo into v19?
SIGT would be cool along with Komodo!
|
|
|
|
newmz
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 05:11:44 AM |
|
Does bumping fan speed to 100 effect power usage much if really at all? Only negative is noise? Maybe more wear and tear?
Depending on a lot of factors - brand of card (and therefore quality of components), luck, environmental setting the cards are in, etc - running gpu fans at 100% all the time will wear the fans out much more quickly. I believe they are spec'd to ideally run for the life of the rest of the card's components at about 60% all the time, and going above that is supposed to be just for extreme situations in gaming - which is what these cards were actually designed for. I have been mining for over a year in Australia which is a very tough place for GPUs in the summer without aircon and I started out with used AMD cards mining ETH (in the good old days of mining 5 ETH every three days at 250mh/s). I have had to run the fans at 90%-100% sometimes with the cards at 80 degrees plus and in the last three months I have had many fan failures. I have some Sapphire Tri-X R9 290's and I have replaced the whole triple fan array on two cards, and one individual fan on another card. R9 290s are power hungry monsters and always ran really hot compared to other cards, and all cards use more power when they are hotter - so it's a "balancing act". 3 of the 1st 290s I ever bought were reference design blower style coolers and were SO loud in summer I had to watercool them (at ridiculous expense) or my lady would have either left or made me stop mining, because my rigs are in a room next our bedroom. One card I once owned i nicknamed "the lawnmower" because it was so f'ing loud. I sold it to a friend who didn't care. Watercooled cards are awesome - silent and always running at 50-60 degrees even on 40 degree days, but it certainly isn't economical in terms of ROI. I just did it because I love mining as a hobby and love modding stuff to make it work better. I still run those three watercooled cards and they have always been overclocked to within an inch of their lives and they keep on going at low temps and no noise. I would encourage anyone to try to lower the temperature of the room if possible, spread the cards out as much as possible so the fans can "breathe" and use external fans (like even large domestic cooling fans) to blow the hot air away from around the rigs. Hopefully if any or all of these measures drop the temperature you should definitely lower the GPU fan speeds whenever possible. In recent months I have been slowly migrating to Nvidia cards. I used to run 2 x 6 card AMD rigs. Now I have 1 x 5 card Nvidia rig (with 2 more 1070's on back-order) and 1 x 4 card AMD rig (I sold the most "respectable" 2 cards on that rig recently - a Sapphire 390 nitro and an MSI 290x). I have been wondering what sort of temperatures are safe cruising for Nvidia cards. Older generation R9 AMD cards were always expected to run hot and designed that way because they were big power consumers, but Pascal cards that all run at 150W or less shouldn't be too hot that often right? What kind of temperatures are you guys comfortable with on 1060/70/80s?
|
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 05:20:55 AM |
|
Hello all --
I'm using v0018 with 6x nvidia 1070s and all is fine. I was just wondering --- How long will my GPUs last running 24/7 ?
Does anyone have an idea or enough rig history to know?
Regards !!!
I have two rigs go almost 3 weeks 24/7. Only one has done a soft reset in which the miner reset and started back up. The second rig hasn't even had a soft reset in the three weeks. That's cool but that's not what I'm trying to ask. I'm wondering if after a solid year or two will my GPUs break down and require replacement? Regards! many years ... regular maintenance on both the physical cards - and hardware - from dust and heat ... we have had theFARM run for three years without issue - adding newer cards all the time ... theFARM died due to a massive brownout that destroyed the building electrical as well - but had it not been for that - theFARM may still be running now - 4years on ... any card that seems to be faulty - remove or replace and get serviced immediately ... its not only an interruption to the mining process - but can be detrimental to the other equipment in the rig you have it in ... ALWAYS check power supplies - especially if you have two or more hooked up to the rig ... follow through with these things once every two weeks - and you will have a long term mining system that will run and run ... especially if you run linux ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) ... #crysx
|
|
|
|
MATHReX
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 06:39:42 AM |
|
Hey, peeps, I don't know if it's been discussed before in here but as I scored through last 15-20 pages, I didn't find any relevant answer to my query. I just want to ask if Windows 10 is giving me 24.5 MH/s on my GTX 1060 with +800 MC and -150 CC using afterburner, that's not the case with Linux. I'm getting around 22 MH/s for the same settings on Linux. Any reason why that happens? Is it because of performance mode not being on level 2 in Nvidia server X settings?
|
|
|
|
dbolivar
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 119
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 07:13:01 AM |
|
Hey, peeps, I don't know if it's been discussed before in here but as I scored through last 15-20 pages, I didn't find any relevant answer to my query. I just want to ask if Windows 10 is giving me 24.5 MH/s on my GTX 1060 with +800 MC and -150 CC using afterburner, that's not the case with Linux. I'm getting around 22 MH/s for the same settings on Linux. Any reason why that happens? Is it because of performance mode not being on level 2 in Nvidia server X settings?
AFAIK in Linux you should try a doubled MC offset (1600 in your case), to be equivalent of the Afterburner settings in Windows. I think in Windows the offset is applied to the "base" or "real" memory clock, while in Linux it's applied to the effective clock, which is twice, since we are working with double data rate (DDR) memory. (Well, GDDR5 memory clocks are not as simple as that, but that's what I figured from reading reports here and there.)
|
|
|
|
damNmad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 378
Merit: 104
nvOC forever
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 08:15:39 AM |
|
Anyone know how to set up Mining Pool hub in 1 Bash? My attempts have failed
Here's one example:
MUSIC_WORKER="nv$IP_AS_WORKER" MUSIC_ADDRESS="ATCkit9" MUSIC_POOL="us-east.ethash-hub.miningpoolhub.com:20585" MUSIC_EXTENTION_ARGUMENTS=""
Are you just mining MUSIC or DUAL_MUSIC_XXX?? Let me know this, i will give you the code to work it out. I`m mining single coins only. With my AMD rig, I switch coins manually about once a day. MUSIC will be one of the coins I watch on What to mine. In short, if you can show me what works for MUSIC, I can apply the logic for the other coins MPH offers. search for this in oneBash You will see the following if [ $COIN == "MUSIC" ] then
if [ $GENOILorCLAYMORE == "GENOIL-CURRENTLY-NOT-SUPPORTED" ] then HCD='/home/m1/eth/Genoil-U/ethminer'
MUSICADDR="$MUSIC_ADDRESS/$MUSIC_WORKER"
screen -dmS miner $HCD -S $MUSIC_POOL -O $MUSICADDR:x -U
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi this is the line you need to change MUSICADDR="$MUSIC_ADDRESS/$MUSIC_WORKER" replace the '/' with '.' and it should work. The way I normally prefer follows like this, add '#' for the previous line and add new line with '.', it can be re used in future if necessary. #MUSICADDR="$MUSIC_ADDRESS/$MUSIC_WORKER" MUSICADDR="$MUSIC_ADDRESS.$MUSIC_WORKER" Hope you already knew what to put in MUSIC_ADDRESS & MUSIC_WORKER and right mining port. Good luck and let me know if you still have issue with it
|
|
|
|
MATHReX
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 11:32:04 AM |
|
Hey, peeps, I don't know if it's been discussed before in here but as I scored through last 15-20 pages, I didn't find any relevant answer to my query. I just want to ask if Windows 10 is giving me 24.5 MH/s on my GTX 1060 with +800 MC and -150 CC using afterburner, that's not the case with Linux. I'm getting around 22 MH/s for the same settings on Linux. Any reason why that happens? Is it because of performance mode not being on level 2 in Nvidia server X settings?
AFAIK in Linux you should try a doubled MC offset (1600 in your case), to be equivalent of the Afterburner settings in Windows. I think in Windows the offset is applied to the "base" or "real" memory clock, while in Linux it's applied to the effective clock, which is twice, since we are working with double data rate (DDR) memory. (Well, GDDR5 memory clocks are not as simple as that, but that's what I figured from reading reports here and there.) Well, I tried your way with double MC offset but still the same results. Anyway, thanks for the reply bud.
|
|
|
|
bdiddle
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 75
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 12:49:19 PM |
|
Hey I'd like to set oneBash to execute the miner with a screen attached, so that I can easily ssh in and just screen -r to see my hash rates per card.
I've looked through the script, but am not quite sure the best place to put it. I'd like it to not care which coin/miner is being used.
Ideas?
|
|
|
|
fogcity
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 03:34:41 PM |
|
Does bumping fan speed to 100 effect power usage much if really at all? Only negative is noise? Maybe more wear and tear?
Depending on a lot of factors - brand of card (and therefore quality of components), luck, environmental setting the cards are in, etc - running gpu fans at 100% all the time will wear the fans out much more quickly. I believe they are spec'd to ideally run for the life of the rest of the card's components at about 60% all the time, and going above that is supposed to be just for extreme situations in gaming - which is what these cards were actually designed for. I have been mining for over a year in Australia which is a very tough place for GPUs in the summer without aircon and I started out with used AMD cards mining ETH (in the good old days of mining 5 ETH every three days at 250mh/s). I have had to run the fans at 90%-100% sometimes with the cards at 80 degrees plus and in the last three months I have had many fan failures. I have some Sapphire Tri-X R9 290's and I have replaced the whole triple fan array on two cards, and one individual fan on another card. R9 290s are power hungry monsters and always ran really hot compared to other cards, and all cards use more power when they are hotter - so it's a "balancing act". 3 of the 1st 290s I ever bought were reference design blower style coolers and were SO loud in summer I had to watercool them (at ridiculous expense) or my lady would have either left or made me stop mining, because my rigs are in a room next our bedroom. One card I once owned i nicknamed "the lawnmower" because it was so f'ing loud. I sold it to a friend who didn't care. Watercooled cards are awesome - silent and always running at 50-60 degrees even on 40 degree days, but it certainly isn't economical in terms of ROI. I just did it because I love mining as a hobby and love modding stuff to make it work better. I still run those three watercooled cards and they have always been overclocked to within an inch of their lives and they keep on going at low temps and no noise. I would encourage anyone to try to lower the temperature of the room if possible, spread the cards out as much as possible so the fans can "breathe" and use external fans (like even large domestic cooling fans) to blow the hot air away from around the rigs. Hopefully if any or all of these measures drop the temperature you should definitely lower the GPU fan speeds whenever possible. In recent months I have been slowly migrating to Nvidia cards. I used to run 2 x 6 card AMD rigs. Now I have 1 x 5 card Nvidia rig (with 2 more 1070's on back-order) and 1 x 4 card AMD rig (I sold the most "respectable" 2 cards on that rig recently - a Sapphire 390 nitro and an MSI 290x). I have been wondering what sort of temperatures are safe cruising for Nvidia cards. Older generation R9 AMD cards were always expected to run hot and designed that way because they were big power consumers, but Pascal cards that all run at 150W or less shouldn't be too hot that often right? What kind of temperatures are you guys comfortable with on 1060/70/80s? Hey newmz -- Thanks so much for the detailed answer !!!
|
|
|
|
ATCkit
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 04:35:15 PM Last edit: August 05, 2017, 08:31:14 PM by ATCkit |
|
Anyone know how to set up Mining Pool hub in 1 Bash? My attempts have failed
Here's one example:
MUSIC_WORKER="nv$IP_AS_WORKER" MUSIC_ADDRESS="ATCkit9" MUSIC_POOL="us-east.ethash-hub.miningpoolhub.com:20585" MUSIC_EXTENTION_ARGUMENTS=""
Are you just mining MUSIC or DUAL_MUSIC_XXX?? Let me know this, i will give you the code to work it out. Seems simple enough. Will change it over the weekend. Much appreciated. I`m mining single coins only. With my AMD rig, I switch coins manually about once a day. MUSIC will be one of the coins I watch on What to mine. In short, if you can show me what works for MUSIC, I can apply the logic for the other coins MPH offers. search for this in oneBash You will see the following if [ $COIN == "MUSIC" ] then
if [ $GENOILorCLAYMORE == "GENOIL-CURRENTLY-NOT-SUPPORTED" ] then HCD='/home/m1/eth/Genoil-U/ethminer'
MUSICADDR="$MUSIC_ADDRESS/$MUSIC_WORKER"
screen -dmS miner $HCD -S $MUSIC_POOL -O $MUSICADDR:x -U
if [ $LOCALorREMOTE == "LOCAL" ] then screen -r miner fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ] do sleep 60 done fi this is the line you need to change MUSICADDR="$MUSIC_ADDRESS/$MUSIC_WORKER" replace the '/' with '.' and it should work. The way I normally prefer follows like this, add '#' for the previous line and add new line with '.', it can be re used in future if necessary. #MUSICADDR="$MUSIC_ADDRESS/$MUSIC_WORKER" MUSICADDR="$MUSIC_ADDRESS.$MUSIC_WORKER" Hope you already knew what to put in MUSIC_ADDRESS & MUSIC_WORKER and right mining port. Good luck and let me know if you still have issue with it Much appreciated.
|
|
|
|
Nexillus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 05, 2017, 05:31:19 PM |
|
Does bumping fan speed to 100 effect power usage much if really at all? Only negative is noise? Maybe more wear and tear?
Depending on a lot of factors - brand of card (and therefore quality of components), luck, environmental setting the cards are in, etc - running gpu fans at 100% all the time will wear the fans out much more quickly. I believe they are spec'd to ideally run for the life of the rest of the card's components at about 60% all the time, and going above that is supposed to be just for extreme situations in gaming - which is what these cards were actually designed for. I have been mining for over a year in Australia which is a very tough place for GPUs in the summer without aircon and I started out with used AMD cards mining ETH (in the good old days of mining 5 ETH every three days at 250mh/s). I have had to run the fans at 90%-100% sometimes with the cards at 80 degrees plus and in the last three months I have had many fan failures. I have some Sapphire Tri-X R9 290's and I have replaced the whole triple fan array on two cards, and one individual fan on another card. R9 290s are power hungry monsters and always ran really hot compared to other cards, and all cards use more power when they are hotter - so it's a "balancing act". 3 of the 1st 290s I ever bought were reference design blower style coolers and were SO loud in summer I had to watercool them (at ridiculous expense) or my lady would have either left or made me stop mining, because my rigs are in a room next our bedroom. One card I once owned i nicknamed "the lawnmower" because it was so f'ing loud. I sold it to a friend who didn't care. Watercooled cards are awesome - silent and always running at 50-60 degrees even on 40 degree days, but it certainly isn't economical in terms of ROI. I just did it because I love mining as a hobby and love modding stuff to make it work better. I still run those three watercooled cards and they have always been overclocked to within an inch of their lives and they keep on going at low temps and no noise. I would encourage anyone to try to lower the temperature of the room if possible, spread the cards out as much as possible so the fans can "breathe" and use external fans (like even large domestic cooling fans) to blow the hot air away from around the rigs. Hopefully if any or all of these measures drop the temperature you should definitely lower the GPU fan speeds whenever possible. In recent months I have been slowly migrating to Nvidia cards. I used to run 2 x 6 card AMD rigs. Now I have 1 x 5 card Nvidia rig (with 2 more 1070's on back-order) and 1 x 4 card AMD rig (I sold the most "respectable" 2 cards on that rig recently - a Sapphire 390 nitro and an MSI 290x). I have been wondering what sort of temperatures are safe cruising for Nvidia cards. Older generation R9 AMD cards were always expected to run hot and designed that way because they were big power consumers, but Pascal cards that all run at 150W or less shouldn't be too hot that often right? What kind of temperatures are you guys comfortable with on 1060/70/80s? On my 1060s and 1070s I run them between 50C-65C, the room I keep them in has a temp of 21C.
|
|
|
|
gs777
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 118
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 06, 2017, 05:20:06 AM |
|
Hi! I'm about to build a rig with Pentium G4400. But after reading about Skylake issues with hyper threading don't know should I use it or better to return and exchange it with i3?
|
|
|
|
car1999
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 06, 2017, 06:32:36 AM |
|
Hi! I'm about to build a rig with Pentium G4400. But after reading about Skylake issues with hyper threading don't know should I use it or better to return and exchange it with i3?
i have a rig runs 8 cards with G3900, no problem.
|
|
|
|
bobers
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 73
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 06, 2017, 06:44:23 AM |
|
Hi, I have Lexar S75 32gb. After i installed 0018 im getting message "low disk space" I reflashed usb many times but error comes again and again
|
|
|
|
senne
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 06, 2017, 11:50:01 AM |
|
Hi,
I copied nvoc from USB to SSD drive. Problem is it Cant find the onebash on boot. When i click the disk on the gui homepage, it gets recognized and started..
Any bypass so i don't have to click it everytime and the disk gets mounted right or recognized immediately?
|
|
|
|
Bibi187
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 06, 2017, 12:08:24 PM |
|
Hi,
I copied nvoc from USB to SSD drive. Problem is it Cant find the onebash on boot. When i click the disk on the gui homepage, it gets recognized and started..
Any bypass so i don't have to click it everytime and the disk gets mounted right or recognized immediately?
If you don't have an imaging program already download HDDRawCopy (Link) Or get etcher for Mac / Linux / Windows Link When using Etcher to image an SSD or HDD; you will first need to: click the gear at the top right of the application window and enable unsafe mode. NOTE: I have tested etcher on windows and confirmed it is not working correctly with v0018 For now I recommend only using hddrawcopy when imaging on Windows. if you want to easily image SSDs this USB to Sata power and data adapter is great: https://www.amazon.com/StarTech-SATA-Drive-Adapter-Cable/dp/B00HJZJI84
|
|
|
|
|