fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 15, 2017, 05:11:42 PM |
|
Hey, fullzero!
Tell me, when do you fix for P106 cards? I can not collect 40 farms already for 13 cards, because Does not work razgon on your assembly .... please give it 1 hour. I already threw you access to the rig on which there are 13 P106 cards. Access to you in private messages.
Last time I tried to connect it didn't work. I'll try again later today.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 15, 2017, 05:17:16 PM |
|
okay nvOC 0018 has so many changes and alterations to it I can't follow them all.
at the moment I am running windows simply to get skunk to run on nicehash
I would prefer to run linux nvOC 0019 and have it as easy to set up as 0017 was.
I (barely) managed to run the skunk algo on nvOC (on suprnova pool)... Here's basically what I did 1) Install openssl 1.0.1 (Sorry I'm new to this forum so I don't know how to link to other answers, but it's post #2515 on this thread by darklow 2) I used a different ccminer (ccminer 2.2) downloaded from github but after that, all commands worked like ./autogen.sh ./configure.sh ./build.sh (or make / make install) 3) Change 1bash file (Username, miner location, pool address etc. etc.) (Oh, and also I think it is best if you do all the steps in the same computer which runs the GPUs, not sure why though ) Hope I helped ! (This is my first 'helpful' post in bitcointalk.... Cheers !!!) I compiled TP ccminer 2.2 there is a download link on the OP. If you compile it yourself; it is CPU core and thread number specific: so you want to compile it on the weakest CPU you have to ensure it will work on all your rigs ( I compiled using a g1840).
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 15, 2017, 05:25:19 PM |
|
okay nvOC 0018 has so many changes and alterations to it I can't follow them all.
I can get nvOC 0017 to work and have been stick with it.
hopefully nvOC 0019 comes out soon and it is easier to get it to work then nvOC 0018
at the moment I am running windows simply to get skunk to run on nicehash
I would prefer to run linux nvOC 0019 and have it as easy to set up as 0017 was.
I will await nvOC 0019 as I have done nvOC 0018 four times four fails.
v0018 needs manual updates to several of the files (on the OP) to work correctly; and it is more complicated as most of the new features were requested by / made by / for powerusers. v0019 should allow for much easier use / while allowing powerusers to customize as well.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 15, 2017, 05:26:43 PM |
|
Hey FZ,
I ran into an issue that I can't figure out how to fix. I've got 12 gpus on a TB250-BTC Pro, and all of them work fine, except the last one GPU12 (PCI:12:0:0) which doesn't seem to start an xserver instance on boot. Because it doesn't load xserver, the fan and power settings are unavailable for editing, so the card runs too hot and causes power throttling, and occasionally a reboot.
Any idea how to fix that? I checked the /etc/X11/xorg.conf file and it looks fine from what I can tell (all display device settings are there and look the same).
Thanks for your help.
The index (PCI:12:0:0) should be recognized properly. What kind of GPUs are you using? also, have you tried swapping out the riser on that GPU?
|
|
|
|
mraug
Newbie
Offline
Activity: 25
Merit: 0
|
|
August 15, 2017, 05:51:26 PM |
|
could you please add download link for 0017 to the OP?
|
|
|
|
TenaciousJ
|
|
August 15, 2017, 06:16:48 PM |
|
Hey FZ,
I ran into an issue that I can't figure out how to fix. I've got 12 gpus on a TB250-BTC Pro, and all of them work fine, except the last one GPU12 (PCI:12:0:0) which doesn't seem to start an xserver instance on boot. Because it doesn't load xserver, the fan and power settings are unavailable for editing, so the card runs too hot and causes power throttling, and occasionally a reboot.
Any idea how to fix that? I checked the /etc/X11/xorg.conf file and it looks fine from what I can tell (all display device settings are there and look the same).
Thanks for your help.
The index (PCI:12:0:0) should be recognized properly. What kind of GPUs are you using? also, have you tried swapping out the riser on that GPU? That's what I thought too... I put a headless plug on it and it recognized that there was a screen there, but when I restarted after saving that config it won't boot now. Teamviewer never comes online, and the screen never shows any indication of loading the o/s. I'm going to do a clean install and see if I can fix it that way since I upgraded to CUDA 9.0, and that might have caused some problems. the card that's giving the issue is an EVGA 1080 Ti SC Black Edition, but I have 3 of those and the other 2 are fine. It's recognizing the card, so I don't think the riser is the issue, but I guess anything is possible. I'll dig into it some more and see what I can figure out. Thanks for the assist.
|
|
|
|
TenaciousJ
|
|
August 15, 2017, 07:45:49 PM |
|
Hey FZ,
I ran into an issue that I can't figure out how to fix. I've got 12 gpus on a TB250-BTC Pro, and all of them work fine, except the last one GPU12 (PCI:12:0:0) which doesn't seem to start an xserver instance on boot. Because it doesn't load xserver, the fan and power settings are unavailable for editing, so the card runs too hot and causes power throttling, and occasionally a reboot.
Any idea how to fix that? I checked the /etc/X11/xorg.conf file and it looks fine from what I can tell (all display device settings are there and look the same).
Thanks for your help.
The index (PCI:12:0:0) should be recognized properly. What kind of GPUs are you using? also, have you tried swapping out the riser on that GPU? Well, I fixed it.. although I'm not entirely sure what did it. I added a dummy plug to that card, and moved the slot configuration around, then went down to 6 gpus which allowed it to boot again, then rebooted and plugged the other 6 in now all 12 have xserver terminals attached to them so the temp monitoring will work. No clue what caused, or fixed the problem. Such is the way of tech I guess... lol.
|
|
|
|
ivoldemar
Newbie
Offline
Activity: 23
Merit: 0
|
|
August 15, 2017, 08:31:15 PM |
|
Hey, fullzero!
Tell me, when do you fix for P106 cards? I can not collect 40 farms already for 13 cards, because Does not work razgon on your assembly .... please give it 1 hour. I already threw you access to the rig on which there are 13 P106 cards. Access to you in private messages.
Last time I tried to connect it didn't work. I'll try again later today. Sent to the PM new.
|
|
|
|
ironkid
Newbie
Offline
Activity: 59
Merit: 0
|
|
August 15, 2017, 10:31:40 PM |
|
Hi guys. Can someone confirm Nvoc works with 13x gtx 1050ti on Asrock H110 btc motherboard?
|
|
|
|
VoskCoin
|
|
August 16, 2017, 01:53:31 AM |
|
Put together a beginner tutorial style video on how to download, install/setup nvOC specifically nvOC17 https://youtu.be/AuXATxvVBX4Video needs improvement in a few places, will create a better video with the next release of nvOC!
|
|
|
|
philipma1957
Legendary
Online
Activity: 4270
Merit: 8669
'The right to privacy matters'
|
|
August 16, 2017, 01:54:05 AM |
|
okay nvOC 0018 has so many changes and alterations to it I can't follow them all.
I can get nvOC 0017 to work and have been stick with it.
hopefully nvOC 0019 comes out soon and it is easier to get it to work then nvOC 0018
at the moment I am running windows simply to get skunk to run on nicehash
I would prefer to run linux nvOC 0019 and have it as easy to set up as 0017 was.
I will await nvOC 0019 as I have done nvOC 0018 four times four fails.
v0018 needs manual updates to several of the files (on the OP) to work correctly; and it is more complicated as most of the new features were requested by / made by / for powerusers. v0019 should allow for much easier use / while allowing powerusers to customize as well. I understand for my setup now I run 3 nvOC 0017 at the solar array they reboot and are easy to manage. I mine zec and they are pretty much 99% maintenance free. a 3 card and 2 two card 1080ti's total of 7 1080ti's in the house /garage I am running 5 window rigs with 9 1080 ti's and 1 1050ti I am looking to get them all on nvOC 0019 buysolar and I may do a second array and we may have 30 or 50 1080 ti's about 35 minutes from our homes we want to run them on nvOC 0019 so waiting for it to come out. pm me if I can help.
|
|
|
|
bwarbwar
Newbie
Offline
Activity: 12
Merit: 0
|
|
August 16, 2017, 04:22:58 AM |
|
Building my first rig tomorrow (assuming parts arrive on time). Thank you so much for making this.
|
|
|
|
alko67bi
Newbie
Offline
Activity: 26
Merit: 0
|
|
August 16, 2017, 05:00:48 AM |
|
I recommend trying a powerlimit of 68 when dual mining with a 1050ti.
Big thank's fullzero for your work. What powerlimit do you recomending with a 1060 and 1070?
|
|
|
|
damNmad
Full Member
Offline
Activity: 378
Merit: 104
nvOC forever
|
|
August 16, 2017, 07:28:01 AM |
|
This setting is not only for AMD ?
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
Wath the point to put on YES on env setting when u use nvidia ? I prolly miss something my RIG run fine with this option disable
A member requested these as an option so I added them. I don't use them; although I tend to stick to the main coins. It is possible they make a difference when mining some of the more obscure coins. Yes indeed, some coins like Pascal/Pascalite needs them i think!! (may be not!)
|
|
|
|
|
Bibi187
Full Member
Offline
Activity: 420
Merit: 106
https://steemit.com/@bibi187
|
|
August 16, 2017, 11:16:55 AM |
|
I recommend trying a powerlimit of 68 when dual mining with a 1050ti.
Big thank's fullzero for your work. What powerlimit do you recomending with a 1060 and 1070? Respect fullzero work and grown by yourself ? Google is your friend " Hi i am so lazy i cant do a single research by my self, i have to ask." DO THINK BY YOURSELF A LITTLE MAYBE ? Lazy ass
|
|
|
|
lards
Newbie
Offline
Activity: 50
Merit: 0
|
|
August 16, 2017, 12:17:42 PM |
|
Hi fullzero.
I've come across another problem related to p106-100 cards which is the following :
Been running 11 cards on h110 asrock and then tried to connect 12th one and everytime I do it Nvidia drivers seem to crash no matter what I do. It's not a hardware problem as I have tested this card in 11 cards set up and everything boots fine, just the 12th one seem to crash everything and I have to reflash the OS again to make it work. When I try with fresh OS and 12 cards its the same problem again, the nvidia-smi file isn't found and the claymore can't initialize CUDA drivers .
Has anyone seen this before and maybe knows the way to deal with this? Maybe I need to correct something in 1bash to make it work but so far all my tries were a failure and the miner couldn't find drivers.
Thanks for your help.
UPD. Somehow managed to get all 12 cards working but in genoil instead of claymore , still have no idea what the problem was since I've done everything like swapping risers and cards before and this hasn't got me anywhere, but genoil gives lower hashrate then claymore, so does anyone know or can advice on how to make claymore work aat this set up?
I'm guessing the 12th is assigned an odd index variable by the system that the xorg.conf or other system file doesn't properly deal with. I did manage to make the system see all 12 GPUs by missing out the x16 PCI slot but the claymore didn't work for some reason could only use genoil for about 1 hour after this time it crashed. Also after a couple of reboots it seems like the drivers crashed again so I had to reflash the system again. I threw you the teamviewer info in pm, gonna try not to turn off the rig since I still can't work out why it keeps freezing . Now testing with 2 cards on my ATX PSU which has only 2 6pins so that's the max I can do, with using only server PSU 2 cards worked for 10 hours and then the OS froze again for some reason.
|
|
|
|
ironkid
Newbie
Offline
Activity: 59
Merit: 0
|
|
August 16, 2017, 12:26:28 PM |
|
I did manage to make the system see all 12 GPUs by missing out the x16 PCI slot but the claymore didn't work for some reason could only use genoil for about 1 hour after this time it crashed. Also after a couple of reboots it seems like the drivers crashed again so I had to reflash the system again.
I threw you the teamviewer info in pm, gonna try not to turn off the rig since I still can't work out why it keeps freezing . Now testing with 2 cards on my ATX PSU which has only 2 6pins so that's the max I can do, with using only server PSU 2 cards worked for 10 hours and then the OS froze again for some reason. Hi bro I was having issues with freezing system with 11x gtx 1050ti on Biostar TB250. Also the Watchdog auto restarting miner for low gpu utilization every once in a while too. Only way that I got these 2 issues fixed is by using the vanilla v00018 bash and vanilla watchdog and maximus temp control without the updated ones and stopped using teamviewer since it's gui is having adverse effects on Nvoc while mining and making it freeze alot. It works like butter now by just accessing it through SSH and having only minimal gui stuff active inside the miner os.
|
|
|
|
lards
Newbie
Offline
Activity: 50
Merit: 0
|
|
August 16, 2017, 12:38:06 PM |
|
I did manage to make the system see all 12 GPUs by missing out the x16 PCI slot but the claymore didn't work for some reason could only use genoil for about 1 hour after this time it crashed. Also after a couple of reboots it seems like the drivers crashed again so I had to reflash the system again.
I threw you the teamviewer info in pm, gonna try not to turn off the rig since I still can't work out why it keeps freezing . Now testing with 2 cards on my ATX PSU which has only 2 6pins so that's the max I can do, with using only server PSU 2 cards worked for 10 hours and then the OS froze again for some reason. Hi bro I was having issues with freezing system with 11x gtx 1050ti on Biostar TB250. Also the Watchdog auto restarting miner for low gpu utilization every once in a while too. Only way that I got these 2 issues fixed is by using the vanilla v00018 bash and vanilla watchdog and maximus temp control without the updated ones and stopped using teamviewer since it's gui is having adverse effects on Nvoc while mining and making it crash alot. It works like butter now by just accessing it through SSH and having only minimal gui stuff active inside the miner os. Well we have got 2 different motherboards and different cards, I've tried disabling watchdog and teamviewer which had no affect on my problem. What is vanilla v00018 bash and watchdog and where have you got that from? Because I couldn't find any other one 1bashes except the ones in the first post.
|
|
|
|
car1999
|
|
August 16, 2017, 01:11:25 PM |
|
my 8*p106 rig is up, I connect monitor to the mobo, using fresh nvOC 0018, power limit works, all the cards run on 80 watts, but fan speed and overclock don't work. below is the outputs on first run: wait 15 seconds to minimize errors dos2unix: converting file /home/m1/1bash to Unix format ...
removing Windows partition data dd: writing to '/dev/sda1': No space left on device 18433+0 records in 18432+0 records out 9437184 bytes (9.4 MB, 9.0 MiB) copied, 55.2489 s, 171 kB/s
workername: nv180
rig IP: 10.0.0.180
00:02.0 VGA compatible controller: Intel Corporation Device 5902 (rev 04)
Wed Aug 16 08:42:12 2017 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 384.47 Driver Version: 384.47 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | |===============================+======================+======================| | 0 P106-100 Off | 00000000:01:00.0 Off | N/A | | 29% 49C P0 35W / 120W | 584MiB / 6075MiB | 100% Default | +-------------------------------+----------------------+----------------------+ | 1 P106-100 Off | 00000000:02:00.0 Off | N/A | | 27% 35C P8 6W / 120W | 0MiB / 6075MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 2 P106-100 Off | 00000000:03:00.0 Off | N/A | | 27% 33C P8 6W / 120W | 0MiB / 6075MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 3 P106-100 Off | 00000000:05:00.0 Off | N/A | | 27% 35C P8 5W / 120W | 0MiB / 6075MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 4 P106-100 Off | 00000000:06:00.0 Off | N/A | | 27% 36C P8 5W / 120W | 0MiB / 6075MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 5 P106-100 Off | 00000000:07:00.0 Off | N/A | | 27% 33C P8 6W / 120W | 0MiB / 6075MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 6 P106-100 Off | 00000000:08:00.0 Off | N/A | | 27% 32C P8 5W / 120W | 0MiB / 6075MiB | 0% Default | +-------------------------------+----------------------+----------------------+ | 7 P106-100 Off | 00000000:0A:00.0 Off | N/A | | 27% 36C P8 6W / 120W | 0MiB / 6075MiB | 0% Default | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: GPU Memory | | GPU PID Type Process name Usage | |=============================================================================| | 0 1121 G /usr/lib/xorg/Xorg 474MiB | | 0 1833 G compiz 107MiB | | 0 2116 G unity-control-center 1MiB | +-----------------------------------------------------------------------------+
Power limit for GPU 00000000:01:00.0 was set to 80.00 W from 120.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:02:00.0 was set to 80.00 W from 120.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:03:00.0 was set to 80.00 W from 120.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:05:00.0 was set to 80.00 W from 120.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:06:00.0 was set to 80.00 W from 120.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:07:00.0 was set to 80.00 W from 120.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:08:00.0 was set to 80.00 W from 120.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
Power limit for GPU 00000000:0A:00.0 was set to 80.00 W from 120.00 W.
Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.
All done.
ERROR: Error assigning value 75 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:0]) as specified in assignment '[fan:0]/GPUTargetFanSpeed=75' (Unknown Error).
ERROR: Error assigning value 75 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:1]) as specified in assignment '[fan:1]/GPUTargetFanSpeed=75' (Unknown Error).
ERROR: Error assigning value 75 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:2]) as specified in assignment '[fan:2]/GPUTargetFanSpeed=75' (Unknown Error).
ERROR: Error assigning value 75 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:3]) as specified in assignment '[fan:3]/GPUTargetFanSpeed=75' (Unknown Error).
ERROR: Error assigning value 75 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:4]) as specified in assignment '[fan:4]/GPUTargetFanSpeed=75' (Unknown Error).
ERROR: Error assigning value 75 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:5]) as specified in assignment '[fan:5]/GPUTargetFanSpeed=75' (Unknown Error).
ERROR: Error assigning value 75 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:6]) as specified in assignment '[fan:6]/GPUTargetFanSpeed=75' (Unknown Error).
ERROR: Error assigning value 75 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:7]) as specified in assignment '[fan:7]/GPUTargetFanSpeed=75' (Unknown Error).
[detached from 2753.miner]
|
|
|
|
|