[ mining os ] nvoc

[papampi]

Hey guys, i missing something ...

I have default file on nvOC, i just modify stresst count on GPU to trigger restart more fast if GPU crash, from 6 cycles verification to 4 cycles.

My problem is when i have nvOC launched, if my miner crash, 1bash will launch a dual miner process every time ...

So i finish with 2 processing miner running, but i lost some perf. I test it by hand, i close miner process, launch "1bash" and again i get dual process launch

EDIT : any fix about this issue ?

Tell me more about it;

Is it mining same dual coin every time? What is the coin you are actually trying to mine?

I actually mining ETH + SC, is simple, on first boot is ok.
After if i get a software crash and get reset, i got 2 miner processing working in same time.
Same problem, if i stop wdog process, i stop miner process. I do "bash 1bash", screen -ls show me two miner processor running ...

in v0019 you should launch 3main ,
and every time you kill 3main it will launch again.
so kill miner by

Code:

pkill -e miner

then kill 3main by

Code:

pkill -e 3main

3main should be launched again with 1 miner

after you killed 3main check if its running again with

Code:

ps aux| grep 3main

Code:

pkill -e 3main

cannot kill 3main, use pkill -f 3main.

Good call, didnt know that
Thanks for mentioning.

[papampi]

Hi

I'm testing the v19 and I'm completely lost with the XMR mining client

what I have to do if I want to mine XMR with my NVIDIA (not the CPU)

I've set XMR for the coin and I'm seeing a lot of miner process to popup and reboot

thanks

You mine to your wallet? (which pool?)

I haven't mined XMR using 1bash yet! (I've mined it using other ways)

My guess would be, you may need to disable 'WATCH_DOG'! (because XMR doesn't use memory!!) - hope someone mining XMR will correct me if I'm wrong. (my assumption is WATCH_DOG restarting the miner)

Please put any screenshots of errors! ('WATCH_DOG' log probably), can help you further using them.

Watch dog check gpu utilization and count

Code:

      GPU_COUNT:  6
GPU UTILIZATION:  98 99 100 96 99 97

If count from last check drops, it will reboot machine
if utilization is lower than 90 in 6 consecutive checks it will restart miner.
Also I think if restarting miner doesnt fix low utilization it will reboot machine too.

[damNmad]

Hi

I'm testing the v19 and I'm completely lost with the XMR mining client

what I have to do if I want to mine XMR with my NVIDIA (not the CPU)

I've set XMR for the coin and I'm seeing a lot of miner process to popup and reboot

thanks

You mine to your wallet? (which pool?)

I haven't mined XMR using 1bash yet! (I've mined it using other ways)

My guess would be, you may need to disable 'WATCH_DOG'! (because XMR doesn't use memory!!) - hope someone mining XMR will correct me if I'm wrong. (my assumption is WATCH_DOG restarting the miner)

Please put any screenshots of errors! ('WATCH_DOG' log probably), can help you further using them.

Watch dog check gpu utilization and count

Code:

      GPU_COUNT:  6
GPU UTILIZATION:  98 99 100 96 99 97

If count from last check drops, it will reboot machine
if utilization is lower than 90 in 6 consecutive checks it will restart miner.
Also I think if restarting miner doesnt fix low utilization it will reboot machine too.

That was my assumption and I'm under impression that XMR mining doesn't utilize the GPU 100% all times!! So it might be the reason causing the restarts (better check the 'WATCH_DOG' console and notice the reports).

[argonaute]

Hi

I'm testing the v19 and I'm completely lost with the XMR mining client

what I have to do if I want to mine XMR with my NVIDIA (not the CPU)

I've set XMR for the coin and I'm seeing a lot of miner process to popup and reboot

thanks

You mine to your wallet? (which pool?)

I haven't mined XMR using 1bash yet! (I've mined it using other ways)

My guess would be, you may need to disable 'WATCH_DOG'! (because XMR doesn't use memory!!) - hope someone mining XMR will correct me if I'm wrong. (my assumption is WATCH_DOG restarting the miner)

Please put any screenshots of errors! ('WATCH_DOG' log probably), can help you further using them.

I'm mining toward exchange (bittrex) I've specify add.payID.workername

the issue now is the hashrate is too low

HASHRATE REPORT
| ID |  10s |  60s |  15m |
|  0 | 623.2 | 623.2 | (na) |
---------------------------
Totals:   623.2 623.2 (na) H/s
Highest:  623.3 H/s
hHASHRATE REPORT
| ID |  10s |  60s |  15m |
|  0 | 623.2 | 623.2 | (na) |
---------------------------
Totals:   623.2 623.2 (na) H/s
Highest:  623.3 H/s

I've 7 GPU 1070

and nvidia-smi is showing low GPU utilisation
Thu Sep  7 11:45:50 2017       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.59                 Driver Version: 384.59                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    Off  | 00000000:01:00.0  On |                  N/A |
| 37%   60C    P2    85W / 125W |   1416MiB /  8113MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070    Off  | 00000000:03:00.0 Off |                  N/A |
| 50%   36C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070    Off  | 00000000:06:00.0 Off |                  N/A |
| 50%   38C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070    Off  | 00000000:07:00.0 Off |                  N/A |
| 50%   37C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070    Off  | 00000000:08:00.0 Off |                  N/A |
| 50%   34C    P8    10W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070    Off  | 00000000:09:00.0 Off |                  N/A |
| 50%   33C    P8     8W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   6  GeForce GTX 1070    Off  | 00000000:0A:00.0 Off |                  N/A |
| 50%   30C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+

I've switched off Watchdog, it's better has the reboot have stopped

[papampi]

Hi

I'm testing the v19 and I'm completely lost with the XMR mining client

what I have to do if I want to mine XMR with my NVIDIA (not the CPU)

I've set XMR for the coin and I'm seeing a lot of miner process to popup and reboot

thanks

You mine to your wallet? (which pool?)

I haven't mined XMR using 1bash yet! (I've mined it using other ways)

My guess would be, you may need to disable 'WATCH_DOG'! (because XMR doesn't use memory!!) - hope someone mining XMR will correct me if I'm wrong. (my assumption is WATCH_DOG restarting the miner)

Please put any screenshots of errors! ('WATCH_DOG' log probably), can help you further using them.

I'm mining toward exchange (bittrex) I've specify add.payID.workername

the issue now is the hashrate is too low

HASHRATE REPORT
| ID |  10s |  60s |  15m |
|  0 | 623.2 | 623.2 | (na) |
---------------------------
Totals:   623.2 623.2 (na) H/s
Highest:  623.3 H/s
hHASHRATE REPORT
| ID |  10s |  60s |  15m |
|  0 | 623.2 | 623.2 | (na) |
---------------------------
Totals:   623.2 623.2 (na) H/s
Highest:  623.3 H/s

I've 7 GPU 1070

and nvidia-smi is showing low GPU utilisation
Thu Sep  7 11:45:50 2017      
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.59                 Driver Version: 384.59                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    Off  | 00000000:01:00.0  On |                  N/A |
| 37%   60C    P2    85W / 125W |   1416MiB /  8113MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070    Off  | 00000000:03:00.0 Off |                  N/A |
| 50%   36C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070    Off  | 00000000:06:00.0 Off |                  N/A |
| 50%   38C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070    Off  | 00000000:07:00.0 Off |                  N/A |
| 50%   37C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070    Off  | 00000000:08:00.0 Off |                  N/A |
| 50%   34C    P8    10W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070    Off  | 00000000:09:00.0 Off |                  N/A |
| 50%   33C    P8     8W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   6  GeForce GTX 1070    Off  | 00000000:0A:00.0 Off |                  N/A |
| 50%   30C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+

I've switched off Watchdog, it's better has the reboot have stopped

It seems GPU 1 to 6 are not mining at all
They are all 0%

[argonaute]

Hi

I'm testing the v19 and I'm completely lost with the XMR mining client

what I have to do if I want to mine XMR with my NVIDIA (not the CPU)

I've set XMR for the coin and I'm seeing a lot of miner process to popup and reboot

thanks

You mine to your wallet? (which pool?)

I haven't mined XMR using 1bash yet! (I've mined it using other ways)

My guess would be, you may need to disable 'WATCH_DOG'! (because XMR doesn't use memory!!) - hope someone mining XMR will correct me if I'm wrong. (my assumption is WATCH_DOG restarting the miner)

Please put any screenshots of errors! ('WATCH_DOG' log probably), can help you further using them.

I'm mining toward exchange (bittrex) I've specify add.payID.workername

the issue now is the hashrate is too low

HASHRATE REPORT
| ID |  10s |  60s |  15m |
|  0 | 623.2 | 623.2 | (na) |
---------------------------
Totals:   623.2 623.2 (na) H/s
Highest:  623.3 H/s
hHASHRATE REPORT
| ID |  10s |  60s |  15m |
|  0 | 623.2 | 623.2 | (na) |
---------------------------
Totals:   623.2 623.2 (na) H/s
Highest:  623.3 H/s

I've 7 GPU 1070

and nvidia-smi is showing low GPU utilisation
Thu Sep  7 11:45:50 2017      
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.59                 Driver Version: 384.59                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    Off  | 00000000:01:00.0  On |                  N/A |
| 37%   60C    P2    85W / 125W |   1416MiB /  8113MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070    Off  | 00000000:03:00.0 Off |                  N/A |
| 50%   36C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070    Off  | 00000000:06:00.0 Off |                  N/A |
| 50%   38C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070    Off  | 00000000:07:00.0 Off |                  N/A |
| 50%   37C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070    Off  | 00000000:08:00.0 Off |                  N/A |
| 50%   34C    P8    10W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070    Off  | 00000000:09:00.0 Off |                  N/A |
| 50%   33C    P8     8W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   6  GeForce GTX 1070    Off  | 00000000:0A:00.0 Off |                  N/A |
| 50%   30C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+

I've switched off Watchdog, it's better has the reboot have stopped

It seems GPU 1 to 6 are not mining at all
They are all 0%

Yes

I guess there is an issue with 3main which does not give the right instruction

setup is 7 x 1070

ZEC mining and ETH/SC work perfectly

[papampi]

Hi

I'm testing the v19 and I'm completely lost with the XMR mining client

what I have to do if I want to mine XMR with my NVIDIA (not the CPU)

I've set XMR for the coin and I'm seeing a lot of miner process to popup and reboot

thanks

You mine to your wallet? (which pool?)

I haven't mined XMR using 1bash yet! (I've mined it using other ways)

My guess would be, you may need to disable 'WATCH_DOG'! (because XMR doesn't use memory!!) - hope someone mining XMR will correct me if I'm wrong. (my assumption is WATCH_DOG restarting the miner)

Please put any screenshots of errors! ('WATCH_DOG' log probably), can help you further using them.

I'm mining toward exchange (bittrex) I've specify add.payID.workername

the issue now is the hashrate is too low

HASHRATE REPORT
| ID |  10s |  60s |  15m |
|  0 | 623.2 | 623.2 | (na) |
---------------------------
Totals:   623.2 623.2 (na) H/s
Highest:  623.3 H/s
hHASHRATE REPORT
| ID |  10s |  60s |  15m |
|  0 | 623.2 | 623.2 | (na) |
---------------------------
Totals:   623.2 623.2 (na) H/s
Highest:  623.3 H/s

I've 7 GPU 1070

and nvidia-smi is showing low GPU utilisation
Thu Sep  7 11:45:50 2017      
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.59                 Driver Version: 384.59                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    Off  | 00000000:01:00.0  On |                  N/A |
| 37%   60C    P2    85W / 125W |   1416MiB /  8113MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070    Off  | 00000000:03:00.0 Off |                  N/A |
| 50%   36C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070    Off  | 00000000:06:00.0 Off |                  N/A |
| 50%   38C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070    Off  | 00000000:07:00.0 Off |                  N/A |
| 50%   37C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070    Off  | 00000000:08:00.0 Off |                  N/A |
| 50%   34C    P8    10W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070    Off  | 00000000:09:00.0 Off |                  N/A |
| 50%   33C    P8     8W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   6  GeForce GTX 1070    Off  | 00000000:0A:00.0 Off |                  N/A |
| 50%   30C    P8     9W / 125W |     19MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+

I've switched off Watchdog, it's better has the reboot have stopped

It seems GPU 1 to 6 are not mining at all
They are all 0%

Yes

I guess there is an issue with 3main which does not give the right instruction

setup is 7 x 1070

ZEC mining and ETH/SC work perfectly

Have you set cpu mining to off ?

[argonaute]

Have you set cpu mining to off ?

yep, for sure

looks like 3main select only one GPU for a reason I don't know

[Bibi187]

Hey guys, i missing something ...

I have default file on nvOC, i just modify stresst count on GPU to trigger restart more fast if GPU crash, from 6 cycles verification to 4 cycles.

My problem is when i have nvOC launched, if my miner crash, 1bash will launch a dual miner process every time ...

So i finish with 2 processing miner running, but i lost some perf. I test it by hand, i close miner process, launch "1bash" and again i get dual process launch

EDIT : any fix about this issue ?

Tell me more about it;

Is it mining same dual coin every time? What is the coin you are actually trying to mine?

I actually mining ETH + SC, is simple, on first boot is ok.
After if i get a software crash and get reset, i got 2 miner processing working in same time.
Same problem, if i stop wdog process, i stop miner process. I do "bash 1bash", screen -ls show me two miner processor running ...

in v0019 you should launch 3main ,
and every time you kill 3main it will launch again.
so kill miner by

Code:

pkill -e miner

then kill 3main by

Code:

pkill -e 3main

3main should be launched again with 1 miner

after you killed 3main check if its running again with

Code:

ps aux| grep 3main

Code:

pkill -e 3main

cannot kill 3main, use pkill -f 3main.

Good call, didnt know that
Thanks for mentioning.

Thanks for your answer That prolly why when i test it i got 2 miner process launched.
Any fix about my true issue ? When miner is restart from watchdog i get 2 process launched not one.

[gdemon]

v0019
missing power.
/ home / m1 / 3main: line 53: nvidia-smi: command not found
what to do?

[elsystem]

Is it possible to cpu mine Zcoin and gpu mine simultaneously on nvoc?

[damNmad]

Thank you, i just tried this.  My 1bash setting has -dcri 40 argument, but when i use + and - keys dcri starts changing from 70, so my setting 40 not works.
 When i manualy lower it to 40 and then restart terminal miner, it again become 70

Where did you set your -dcri 40 at?  Did you change any other files besides onebash?  If all you changed was onebash, paste your settings here and I'll look over them for you if you'd like.  (remove your wallet addresses if your paranoid)

Thanks for looking
I didn't change anything, only 1bash.

USE_ENVIRONMENTAL_VARIBLES="NO"   #YES  NO

DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="SLASH"    # DOT  or  SLASH         # formerly ETHERMINEdotORG

CLAYMORE_VERSION="9_7"    # choose 9_8  or  9_7  or  9_5  or  9_4  or  8_0

ETHMINER_or_GENOIL_or_CLAYMORE="CLAYMORE"  # choose  ETHMINER  or  GENOIL  or  CLAYMORE


ETH_WORKER="$WORKERNAME"
ETH_ADDRESS="xxxxxxxxxxxxxxxxxxxxxxxxxxx"
ETH_POOL="eth-eu1.nanopool.org:9999"
ETH_EXTENTION_ARGUMENTS="-dcri 40"    # add any additional claymore arguments desired here

Interesting.  Have you tried to close and restart the miner after manually adjusting the dcri?  Have you also tried to use version 9_8?

Yes, i did, dcri become 70 again. At 9.8 i have low ETH hashrate at solo i i swiched back to 9.7

Hey, what coin you are trying to mine??

Or paste the result of this command:

Code:

ps aux | grep miner

You can wipe out your addresses (but no body can do anything by just knowing your wallet addresses )

Im mining DUAL ETH_SC

m1        2435 99.7  0.8 416748 34156 pts/18   Sl+  02:06  22:32 /home/m1/cpuOPT/cpuminer -a cryptonight -o stratum+tcp://xmr-eu1.nanopool.org:14444 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.4a0aa02594986680ea5a1216d96f5643b6c19773cfce33e58e2be74336ae5f 5c.053 -p x -t 1
m1        2590  0.0  0.0  27488  2920 ?        Ss   02:06   0:00 SCREEN -dmS miner /home/m1/eth/9_7/ethdcrminer64 -epool eth-eu1.nanopool.org:9999 -ewal 0x73736a74f5d80ad6c8c71a4e0651e9dfff789a13/053 -epsw x -allpools 1 -dpool sia-eu1.nanopool.org:7777 -dwal 395a59c4328253491ef79bf01dd637444e79a0d64b92ca56e06087dd8bfc10ef794d1ed1d1a9/053 -dpsw x -dcoin sc -dcri 70 -dbg -1
m1        2591  0.0  0.0  27056  2844 pts/17   S+   02:06   0:00 screen -r miner
m1        2592  3.5 20.1 189844572 803408 pts/21 Ssl+ 02:06   0:48 /home/m1/eth/9_7/ethdcrminer64 -epool eth-eu1.nanopool.org:9999 -ewal 0x73736a74f5d80ad6c8c71a4e0651e9dfff789a13/053 -epsw x -allpools 1 -dpool sia-eu1.nanopool.org:7777 -dwal 395a59c4328253491ef79bf01dd637444e79a0d64b92ca56e06087dd8bfc10ef794d1ed1d1a9/053 -dpsw x -dcoin sc -dcri 70 -dbg -1
m1        4187  0.0  0.0  14224  1060 pts/16   S+   02:28   0:00 grep --color=auto miner
m1@m1-desktop:~$

cpu mining is enabled too
disable it

How cpu mining can change dcri?
The question is how to change dcri argument in 0019. In 1bash dcri setting does not work for me

Well, if you are intentionally doing CPU mining (& you are aware of it) that's fine, it doesn't impact the DCRI at all.

You can set up or change dcri in 1bash or 3main or even both

The thing is, answer is in the result of 'ps aux | grep miner'.

Look closely, you can see -dcri 70 in it.

So fix goes like this (Trust me, this works) :

Go to 3main; search for 'ETC_SC'

find this highlighted line;

screen -dmS miner $HCD -epool $ETC_POOL -ewal $ETCADDR -epsw x -allpools 1 -dpool $SC_POOL -dwal $SCADDR -dpsw x -dcoin sc -dcri 70 -dbg -1 $ETC_EXTENSION_ARGUMENTS

Delete that highlighted bit (if you are intending to add it in 1bash 'ETC_EXTENSION_ARGUMENTS'); and it should look like this:

screen -dmS miner $HCD -epool $ETC_POOL -ewal $ETCADDR -epsw x -allpools 1 -dpool $SC_POOL -dwal $SCADDR -dpsw x -dcoin sc -dbg -1 $ETC_EXTENSION_ARGUMENTS

and add that dcri value here

Code:

ETC_EXTENTION_ARGUMENTS="-dcri 40"

or you can even change it from '70' to '40' and don't add any thing under 'ETC_EXTENSION_ARGUMENTS' (it doesn't even matter even if you have same dcri value in 2 places )

screen -dmS miner $HCD -epool $ETC_POOL -ewal $ETCADDR -epsw x -allpools 1 -dpool $SC_POOL -dwal $SCADDR -dpsw x -dcoin sc -dcri 40 -dbg -1 $ETC_EXTENSION_ARGUMENTS

do the same for 'ETH_SC' by searching 'ETH_SC' in 3main

screen -dmS miner $HCD -epool $ETH_POOL -ewal $ETHADDR -epsw x -allpools 1 -dpool $SC_POOL -dwal $SCADDR -dpsw x -dcoin sc -dcri 70 -dbg -1 $ETH_EXTENSION_ARGUMENTS

Try this it will definitely work, let me know if you still see any issue of it.

Now it works. THANK YOU

Glad it worked! You are welcome

Thanks for Helping damNmad. 

I will move the -dcri to be a default  EXTENSION_ARGUMENT rather than being hardcoded in 3main in the future to prevent this potential problem in the future; I believe doing so was damNmad's idea.

Thanks fullzero, yeah having dcri as default EXTENSION_ARGUMENT will be the best way going forward. (will do that in my upcoming 1bash)

[papampi]

It would be nice to implement unified zpool worker name into zpool password in the new 1bash and 3main

if use bitcoin for zpool

Code:

ZPOOLWORKER="$WORKERNAME,c=BTC"

[damNmad]

It would be nice to implement unified zpool worker name into zpool password in the new 1bash and 3main

if use bitcoin for zpool

Code:

ZPOOLWORKER="$WORKERNAME,c=BTC"

Point duly taken papampi

Will add it to my upcoming version;

You suggested couple of coins after ZPOOL_EQUIHASH and MPH_EQUIHASH? can you please re post them here.

From now on, I will make a list and add them simultaneously.

Thanks  

[papampi]

It would be nice to implement unified zpool worker name into zpool password in the new 1bash and 3main

if use bitcoin for zpool

Code:

ZPOOLWORKER="$WORKERNAME,c=BTC"

Point duly taken papampi

Will add it to my upcoming version;

You suggested couple of coins after ZPOOL_EQUIHASH and MPH_EQUIHASH? can you please re post them here.

From now on, I will make a list and add them simultaneously.

Thanks  

Thanks mate
No special requests 👍👍
Was gonna tell you that I have plenty free time in coming days and can help adding coins, but u got me first.
So let me know what coins are already done and we can add what's left in MPH and Zpool algo- mining

[papampi]

I think I posted these 3 configs
ZPOOL_EQUIHASH ZPOOL_NEOSCRYPT MPH_EQUIHASH

[Temporel]

Im building another rig next week and I want to try nv OC or SMos, not sure which one Ill try first yet.

Here are the main parts Im waiting for:
ASRock H110 Pro BTC+
12 Asus GTX-1070
16GB RAM
m.2 SSD

Anything I should know before I start ?

TYIA

[leenoox]

Has anyone tried using Firefox in nvOC while mining? It is painfuly slow even on my rigs with i7 cpu's. Same thing happens in v18 and v19. If I kill the mining process Firefox works well. Strange... fullzero, any idea what might cause firefox to crawl like that?

[dstm]

Has anyone tried using Firefox in nvOC while mining? It is painfuly slow even on my rigs with i7 cpu's. Same thing happens in v18 and v19. If I kill the mining process Firefox works well. Strange... fullzero, any idea what might cause firefox to crawl like that?

It's because your GPU is fully loaded when u start mining, so it needs more time to draw the screen

[papampi]

Has anyone tried using Firefox in nvOC while mining? It is painfuly slow even on my rigs with i7 cpu's. Same thing happens in v18 and v19. If I kill the mining process Firefox works well. Strange... fullzero, any idea what might cause firefox to crawl like that?

Completely normal, GPU is under full pressure and cant render pages.