[OS] nvOC easy-to-use Linux Nvidia Mining

[Bart_37]

I want to participate and create web site with rig control (like on simplemining.net)
I can create website that manages rigs, website can generate full config bash file.
Modifications needed for nvOS is to make on boot to download new config from server and every few minutes make some requests to server to send statistics (hashrate / temreratures / miner console /etc ) and in reply server will return commands if rig must reboot or redownload config (by user request)

So i can make server part easily, who will participate? With whom i can talk about that?
 

I think that its a really good idea, for non pro users and can be use as alternative for simplemining or ethos, but first of all we (all users of this rigs) should we have server  with some ddos protection or even CDN (can be ovh + cloudflare) if ofcourse it will be in "public" zone, because i can be also avalibe only in your local network...

[1714169477]

1714169477

[1714169477]

1714169477

[1714169477]

1714169477

[1714169477]

1714169477

[whiteman85]

I think first create only local version, it will take a while to create good web gui.

[papampi]

I want to participate and create web site with rig control (like on simplemining.net)
I can create website that manages rigs, website can generate full config bash file.
Modifications needed for nvOS is to make on boot to download new config from server and every few minutes make some requests to server to send statistics (hashrate / temreratures / miner console /etc ) and in reply server will return commands if rig must reboot or redownload config (by user request)

So i can make server part easily, who will participate? With whom i can talk about that?
 

Very good idea
Would love to make our web page better.
Let me know if I can help in any ways

[Bart_37]

I think first create only local version, it will take a while to create good web gui.

Yes, in some cases i can agree with you, but i think that we can split work between some guys, one part of them will work on CLI / GUI, and another team will focus on WEB interface.

[kk003]

!? Just make static entries for each rig in the router and no matter which OS you would have installed (Linux, Windows or else) every rig will always receive the same address without making any changes to it's network configuration at all.

Tied to MAC address, I take it?

Not just like that:
1. Make static entries for each rig in the router: if you reset the router to default setting you probably lose the rig's ip
2. Don't need to make static entries for each rig in the router. As long as you don't spend all available ips in your pool you always will get the same ip
3. If you config /etc/network/interfaces with static ip in router's default range you'll always get on line and known your ip as this does not change

There is a few possibilities about what setup should be used which depends on user expectations.

In my case, my rigs are configure with static ip in computer and in router's default range in case of reset/default settings, no DHCP, ssh ports no standard and all behind routers with DHCP off.  

[Bibi187]

Hey guys, anyone can provide me a simple of zm config on 3main for mining Equihash algo ?

I am on v00019 and only have EBWF, it seems this two miner dont use same option setting.

Ok i am bit lazy i can do it my self but is more simple to ask

Thanks in advance

[papampi]

Hey guys, anyone can provide me a simple of zm config on 3main for mining Equihash algo ?

I am on v00019 and only have EBWF, it seems this two miner dont use same option setting.

Ok i am bit lazy i can do it my self but is more simple to ask

Thanks in advance

From 19-1.4:

Code:

if [ $COIN == "ZEC" ]
then

if [ $EWBF_VERSION == "3_3" ]
then
HCD='/home/m1/zec/v3_3/miner'
fi

if [ $EWBF_VERSION == "3_4" ]
then
HCD='/home/m1/zec/v3_4/miner'
fi

ZECADDR="$ZEC_ADDRESS.$ZEC_WORKER"

if [ $ZM_or_EWBF == "ZM" ]
then
HCD='/home/m1/zec/zm/5_3/zm_miner'
screen -dmSL miner $HCD --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT -- time;
fi

if [ $ZM_or_EWBF == "EWBF" ]
then
screen -dmSL miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT;
fi

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

[Bibi187]

Thanks papampi

That what i need and you provide me this one fast!

In preparation for BTCG like lot of people i assume ...

Anyone have fine setting for EQUIHASH ?

I am on 8x 1070 seems stable running on ETH algo with +100OC +1600MC

I stick to this number and some tweak can be done ?

Once again thanks in advance

EDIT : It seems i have something to add in 1bash to ? To choice between ZM or EBWF

Something like

ZM_or_EWBF == "ZM" right ?

[papampi]

Thanks papampi

That what i need and you provide me this one fast!

In preparation for BTCG like lot of people i assume ...

Anyone have fine setting for EQUIHASH ?

I am on 8x 1070 seems stable running on ETH algo with +100OC +1600MC

I stick to this number and some tweak can be done ?

Once again thanks in advance

EDIT : It seems i have something to add in 1bash to ? To choice between ZM or EBWF

Something like

ZM_or_EWBF == "ZM" right ?

yup

Code:

ZM_or_EWBF="ZM"  # choose  ZM  or  EWBF

[Stubo]

From 19-1.4:

Code:

.
.
.
if [ $ZM_or_EWBF == "ZM" ]
then
HCD='/home/m1/zec/zm/5_3/zm_miner'
screen -dmSL miner $HCD --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT -- time;
fi
.
.
.

I don't think that is going to work because 0.5.3 is your personal upgrade, PAPAMPI. Did fullzero repackage 19-1.4 with 0.5.3?

[Bibi187]

From 19-1.4:

Code:

.
.
.
if [ $ZM_or_EWBF == "ZM" ]
then
HCD='/home/m1/zec/zm/5_3/zm_miner'
screen -dmSL miner $HCD --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT -- time;
fi
.
.
.

I don't think that is going to work because 0.5.3 is your personal upgrade, PAPAMPI. Did fullzero repackage 19-1.4 with 0.5.3?

It will work dont worry

I will modify path for my system!

I have a tweaked nvOC, thanks for this anyway.

Thanks papampi

That what i need and you provide me this one fast!

In preparation for BTCG like lot of people i assume ...

Anyone have fine setting for EQUIHASH ?

I am on 8x 1070 seems stable running on ETH algo with +100OC +1600MC

I stick to this number and some tweak can be done ?

Once again thanks in advance

EDIT : It seems i have something to add in 1bash to ? To choice between ZM or EBWF

Something like

ZM_or_EWBF == "ZM" right ?

yup

Code:

ZM_or_EWBF="ZM"  # choose  ZM  or  EWBF

Okay mate thanks

[wi$em@n]

!? Just make static entries for each rig in the router and no matter which OS you would have installed (Linux, Windows or else) every rig will always receive the same address without making any changes to it's network configuration at all.

Tied to MAC address, I take it?

Not just like that:
1. Make static entries for each rig in the router: if you reset the router to default setting you probably lose the rig's ip
2. Don't need to make static entries for each rig in the router. As long as you don't spend all available ips in your pool you always will get the same ip
3. If you config /etc/network/interfaces with static ip in router's default range you'll always get on line and known your ip as this does not change

There is a few possibilities about what setup should be used which depends on user expectations.

In my case, my rigs are configure with static ip in computer and in router's default range in case of reset/default settings, no DHCP, ssh ports no standard and all behind routers with DHCP off.  

You are right, but:
1. Depends on the router in use. I didn't reset mine for about 18 months. I use selfmade router (GA-N3150N-D3V + PfSense)
2. Depends on the router in use and it's config (DHCP lease time). Some "not good" ones tend to lease IP, that was not "online" for some time (rig that hanged for example) to other device (for example somebody came to you and you let him connect to you WiFi and one of the rigs have hanged right before he came)
3. see 2

[kk003]

!? Just make static entries for each rig in the router and no matter which OS you would have installed (Linux, Windows or else) every rig will always receive the same address without making any changes to it's network configuration at all.

Tied to MAC address, I take it?

Not just like that:
1. Make static entries for each rig in the router: if you reset the router to default setting you probably lose the rig's ip
2. Don't need to make static entries for each rig in the router. As long as you don't spend all available ips in your pool you always will get the same ip
3. If you config /etc/network/interfaces with static ip in router's default range you'll always get on line and known your ip as this does not change

There is a few possibilities about what setup should be used which depends on user expectations.

In my case, my rigs are configure with static ip in computer and in router's default range in case of reset/default settings, no DHCP, ssh ports no standard and all behind routers with DHCP off.  

You are right, but:
1. Depends on the router in use. I didn't reset mine for about 18 months. I use selfmade router (GA-N3150N-D3V + PfSense)
2. Depends on the router in use and it's config (DHCP lease time). Some "not good" ones tend to lease IP, that was not "online" for some time (rig that hanged for example) to other device (for example somebody came to you and you let him connect to you WiFi and one of the rigs have hanged right before he came)
3. see 2

You'r right too 
So I said, disable dhcp in router if suitable and rarely will let you down, but of course a newly installed system usually needs DHCP, so I said:
"There is a few possibilities about what setup should be used which depends on user expectations."

In my opinion the first thing that matters is having ssh access to the remote rig once installed without touching the network configuration.

About routers I would get rid of those "Some "not good"" if it were possible.
Anyway, for tastes colors is not it?

[whiteman85]

I think first create only local version, it will take a while to create good web gui.

Yes, in some cases i can agree with you, but i think that we can split work between some guys, one part of them will work on CLI / GUI, and another team will focus on WEB interface.

Maybe gui should be auto generate from onebash, if fullzero change something (add new miner or currency) in onebash it will auto change on gui (less work for future).

[ZenFr]

Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.

[kk003]

Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.

I think that In order to help you must post pool's name.

[papampi]

Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.

Usually pools dont check worker password and best keep it the default "x"
If any one wants to mine for you ... let them mine ... lol

[DangerD]

I want to participate and create web site with rig control (like on simplemining.net)
I can create website that manages rigs, website can generate full config bash file.
Modifications needed for nvOS is to make on boot to download new config from server and every few minutes make some requests to server to send statistics (hashrate / temreratures / miner console /etc ) and in reply server will return commands if rig must reboot or redownload config (by user request)

So i can make server part easily, who will participate? With whom i can talk about that?
 

I think that its a really good idea, for non pro users and can be use as alternative for simplemining or ethos, but first of all we (all users of this rigs) should we have server  with some ddos protection or even CDN (can be ovh + cloudflare) if ofcourse it will be in "public" zone, because i can be also avalibe only in your local network...

I can put it on my server for start without ddos protection.
For start i need to communicate with some linux side developers =)

For getting new config simple wget can be used (ex wget http://address.com/get_config/user_login(from config)/mac_address(from system)/config.sh ) which will be generated on the fly based on user config on website (miner selection with parameters, overclocking etc, and all other configuration options which are available now)


fullzero?

[leenoox]

I want to participate and create web site with rig control (like on simplemining.net)
I can create website that manages rigs, website can generate full config bash file.
Modifications needed for nvOS is to make on boot to download new config from server and every few minutes make some requests to server to send statistics (hashrate / temreratures / miner console /etc ) and in reply server will return commands if rig must reboot or redownload config (by user request)

So i can make server part easily, who will participate? With whom i can talk about that?
 

I think that its a really good idea, for non pro users and can be use as alternative for simplemining or ethos, but first of all we (all users of this rigs) should we have server  with some ddos protection or even CDN (can be ovh + cloudflare) if ofcourse it will be in "public" zone, because i can be also avalibe only in your local network...

I can put it on my server for start without ddos protection.
For start i need to communicate with some linux side developers =)

For getting new config simple wget can be used (ex wget http://address.com/get_config/user_login(from config)/mac_address(from system)/config.sh ) which will be generated on the fly based on user config on website (miner selection with parameters, overclocking etc, and all other configuration options which are available now)


fullzero?

simplemining's business structure is to make money out of it, hence the need for central server so they can control it.

nvOC is free/open source so there is no need for central server and download of config files from the central server.

There is no registered business and no liability nor inspiration to run secure server with ddos protection, fall back system, etc.

What happens if someone hacks your server and distribute/push new config files and make every nvOC rig mine for them? Will you compensate?

The idea of web interface is great and sooner or later will be implemented into nvOC but not as an interface to central server but local one. I should be able to login to my server's IP web interface and manage my rig trough any web browser.
I think we should steer the developement toward this.
Furthermore, we can add master/slave interfaces so that if you have multiple rigs, you will have one master to control all slave rigs.

Right?

[ZenFr]

Hi,
I make a try with nvOC.
In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ?
There is the name of pool, the port, the coin address, the worker name, but no worker password...
Thank you.

Usually pools dont check worker password and best keep it the default "x"
If any one wants to mine for you ... let them mine ... lol

Yes, I know... "-p x" or something else, or nothing.
But I use this option : some of my workers have password for other reasons and the pool test it : if the password is wrong, I cannot connect my worker (error connection message).
How can I make with nvOC ?