papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
November 03, 2017, 07:53:08 PM |
|
I think that its a really good idea, for non pro users and can be use as alternative for simplemining or ethos, but first of all we (all users of this rigs) should we have server with some ddos protection or even CDN (can be ovh + cloudflare) if ofcourse it will be in "public" zone, because i can be also avalibe only in your local network... I can put it on my server for start without ddos protection. For start i need to communicate with some linux side developers =) For getting new config simple wget can be used (ex wget http://address.com/get_config/user_login(from config)/mac_address(from system)/config.sh ) which will be generated on the fly based on user config on website (miner selection with parameters, overclocking etc, and all other configuration options which are available now) fullzero? simplemining's business structure is to make money out of it, hence the need for central server so they can control it. nvOC is free/open source so there is no need for central server and download of config files from the central server. There is no registered business and no liability nor inspiration to run secure server with ddos protection, fall back system, etc. What happens if someone hacks your server and distribute/push new config files and make every nvOC rig mine for them? Will you compensate? The idea of web interface is great and sooner or later will be implemented into nvOC but not as an interface to central server but local one. I should be able to login to my server's IP web interface and manage my rig trough any web browser. I think we should steer the developement toward this. Furthermore, we can add master/slave interfaces so that if you have multiple rigs, you will have one master to control all slave rigs. Right? Totally right leenoox, Exactly what I had in mind for it. @Dangerd, Sent you a pm and asked some questions with no reply I'm handling nvoc web info, And would love to help and make it better
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
November 03, 2017, 09:09:17 PM |
|
Hi, I make a try with nvOC. In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ? There is the name of pool, the port, the coin address, the worker name, but no worker password... Thank you.
Usually pools dont check worker password and best keep it the default "x" If any one wants to mine for you ... let them mine ... lol Yes, I know... "-p x" or something else, or nothing. But I use this option : some of my workers have password for other reasons and the pool test it : if the password is wrong, I cannot connect my worker (error connection message). How can I make with nvOC ? What I did was add a variable for the password in 1bash just after this comment: # set YOUR ADDRESSES, WORKERS, POOL, INTENSITY and PORT: SUPRNOVA_PWD=<miner_password>
and then modify 3main by changing: to ... --pass $SUPRNOVA_PWD ...
Hope this helps.
|
|
|
|
ZenFr
Legendary
Offline
Activity: 1260
Merit: 1046
|
|
November 03, 2017, 10:40:11 PM |
|
Hi, I make a try with nvOC. In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ? There is the name of pool, the port, the coin address, the worker name, but no worker password... Thank you.
Usually pools dont check worker password and best keep it the default "x" If any one wants to mine for you ... let them mine ... lol Yes, I know... "-p x" or something else, or nothing. But I use this option : some of my workers have password for other reasons and the pool test it : if the password is wrong, I cannot connect my worker (error connection message). How can I make with nvOC ? What I did was add a variable for the password in 1bash just after this comment: # set YOUR ADDRESSES, WORKERS, POOL, INTENSITY and PORT: SUPRNOVA_PWD=<miner_password>
and then modify 3main by changing: to ... --pass $SUPRNOVA_PWD ...
Hope this helps. Thanks a lot. I will try as soon as possible (not possible for a few days now). I think this syntax would be decumented in the configuration file : I'm probably the unique miner on SuprNova :-).
|
|
|
|
martinmbasantag
Newbie
Offline
Activity: 3
Merit: 0
|
|
November 04, 2017, 03:05:03 AM |
|
Tried my best to search for an answer, but no luck so far...
has anyone successfully gotten rid of the login loop issue?
Ive console logged in, did a re-image, tried different versions, and every ubuntu based fix i could find online (clear and .Xauthority fixes)
Board is a HP z400 board
broth i have one board like that and it is working fine i didn't any adjustment, just keep on mine if u have a second boot device connected, and don't plug or unplug any devices the first time or when it is loading.
|
|
|
|
guyana77
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 04, 2017, 07:32:32 AM |
|
Dear fullzero, thanks for your hard work on nvoc. Have been using it for half a year already and very much pleased with it. Are you planning to add BTG in the new release? Didn't see it in 1.4. Would be great. Thanks a lot
|
|
|
|
DangerD
Newbie
Offline
Activity: 24
Merit: 0
|
|
November 04, 2017, 09:07:06 AM |
|
I think that its a really good idea, for non pro users and can be use as alternative for simplemining or ethos, but first of all we (all users of this rigs) should we have server with some ddos protection or even CDN (can be ovh + cloudflare) if ofcourse it will be in "public" zone, because i can be also avalibe only in your local network... I can put it on my server for start without ddos protection. For start i need to communicate with some linux side developers =) For getting new config simple wget can be used (ex wget http://address.com/get_config/user_login(from config)/mac_address(from system)/config.sh ) which will be generated on the fly based on user config on website (miner selection with parameters, overclocking etc, and all other configuration options which are available now) fullzero? simplemining's business structure is to make money out of it, hence the need for central server so they can control it. nvOC is free/open source so there is no need for central server and download of config files from the central server. There is no registered business and no liability nor inspiration to run secure server with ddos protection, fall back system, etc. What happens if someone hacks your server and distribute/push new config files and make every nvOC rig mine for them? Will you compensate? The idea of web interface is great and sooner or later will be implemented into nvOC but not as an interface to central server but local one. I should be able to login to my server's IP web interface and manage my rig trough any web browser. I think we should steer the developement toward this. Furthermore, we can add master/slave interfaces so that if you have multiple rigs, you will have one master to control all slave rigs. Right? NP, i can share code so users can deploy server part on their own central servers =) The main idea is to make managing all rigs from one place (for example select all and set to mine BTCz for example to avoid making it one by one) >@Dangerd, >Sent you a pm and asked some questions with no reply >I'm handling nvoc web info, >And would love to help and make it better Sent you reply, just saw pm notification in mail.
|
|
|
|
moofone
Newbie
Offline
Activity: 65
Merit: 0
|
|
November 04, 2017, 11:47:04 AM |
|
Installed v19-1.4 yesterday on a new rig to test a new card. Thought updates were supposed to be disabled in this one, but when I logged in this morning nothing was working and saw this in the logs: [ 142.874644] NVRM: API mismatch: the client has the version 384.90, but NVRM: this kernel module has the version 384.59. Please NVRM: make sure that this kernel module and all NVIDIA driver NVRM: components have the same version. Had to do this to fix it: sudo: unable to resolve host gtx1080ti-r1 Hit:1 http://us.archive.ubuntu.com/ubuntu xenial InRelease Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB] Hit:3 http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial InRelease Fetched 102 kB in 0s (273 kB/s) Reading package lists... Done Building dependency tree Reading state information... Done 38 packages can be upgraded. Run 'apt list --upgradable' to see them. sudo: unable to resolve host gtx1080ti-r1 E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. sudo dpkg --configure -a' <reboot -- working> Here's what I have: APT::Periodic::Update-Package-Lists "1"; APT::Periodic::Download-Upgradeable-Packages "0"; APT::Periodic::AutocleanInterval "0"; 20auto-upgrades APT::Periodic::Update-Package-Lists "1"; APT::Periodic::Unattended-Upgrade "1";I changed the last two to 0.
|
|
|
|
JayneL
Member
Offline
Activity: 104
Merit: 10
|
|
November 04, 2017, 12:19:16 PM |
|
Hi guys can you help me how to add more algo on SALTER_NICEHASH? I want to add cryptonight so that it can automatically switch to that algo pls tnx tnx tnx
|
|
|
|
Temporel
|
|
November 04, 2017, 02:23:48 PM |
|
Hi, I make a try with nvOC. In the configuration file, I see where I write the parameters for each GPU and each Pool, but for the pools, I didn't see where I write the worker password ? There is the name of pool, the port, the coin address, the worker name, but no worker password... Thank you.
Usually pools dont check worker password and best keep it the default "x" If any one wants to mine for you ... let them mine ... lol Yes, I know... "-p x" or something else, or nothing. But I use this option : some of my workers have password for other reasons and the pool test it : if the password is wrong, I cannot connect my worker (error connection message). How can I make with nvOC ? not sure why people are still spreading this but some pool do need the right password. I spent hours trying to figure out why I couldnt mine on a pool using nvOC until I replaced the default password with x (nvOC v19 had z for some reason) So use the password you have in your account (like the ones you setup in suprnova) other pools probably dont care though
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
November 04, 2017, 04:58:59 PM |
|
A few updates I've need to do since installing 1.4 that may help others: Many errors in my syslog referencing timeout waiting for device - There is a hardcoded Sandisk drive in /etc/fstab that should be commented out: UUID=55184403759586FB /mnt/55184403759586FB auto nosuid,nodev,nofail,x-gvfs-show,ro 0 0 /dev/disk/by-id/usb-SanDisk_Cruzer_Blade_4C530001260812105231-0:0-part1 /mnt/usb-SanDisk_Cruzer_Blade_4C530001260812105231-0:0-part1 auto nosuid,nodev,nofail,x-gvfs-show,ro 0 0 Also, if you adjust wattage limits into the triple digits (more than 100w) the temp script seems to throw issues now. Changing: echo -n 117.00| tail -c -5 | head -c -3 to echo -n 117.00| tail -c -6 | head -c -3 seems to bring things back to normal. Still seeing lower hashrates than I did on version 1.1, due to cards using about 80% of their available power limit and not sure why. Also seeing hostname errors and plenty of small other things on a vanilla build (literally just changed 5 items in 1bash) - v1.1 was rock solid, and while I love the idea of these new features, I value stability of mining operation above all else and it seems like we're going backwards a bit on that front. Nice catch on triple digit, I just install 1.4 on one of my 1070 rigs and was goin crazy why it keep popping up old power limit 25 .... New 125 Then I remember your post Saved my day.
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
November 04, 2017, 05:23:02 PM |
|
So, in my effort to thoroughly understand nvOC at a reasonably low level, I am stumped by one question. What is calling/launching 2unix at boot and again if 3main is killed and 2unix "falls out"?
It appears to be part of gnome-session but I am not yet familiar enough with Ubuntu to find it. I see the auto login setup in /etc/lightdm/lightdm.conf but I don't see anything launching that explicitly in .bashrc or .profile. What am I missing?
Thanks in advance.
Guake terminal is involved Yes. I found gnome-terminal.desktop and guake:guake.desktop in /home/m1/.config/autostart but I am still not putting all of the pieces of the puzzle together yet. I don't see any mention of 2unix being launched there. For those of you that care, I found it: m1 1943 1703 0 12:02 ? 00:00:00 python2 -m guake.mainm1 1999 1943 0 12:02 ? 00:00:00 gnome-pty-helper m1 2000 1943 0 12:02 pts/16 00:00:00 /bin/bash m1 2085 1943 0 12:02 pts/18 00:00:00 /bin/bash m1 2316 1943 0 12:03 pts/21 00:00:00 /bin/bash
|
|
|
|
kk003
Member
Offline
Activity: 117
Merit: 10
|
|
November 04, 2017, 10:08:34 PM |
|
So, in my effort to thoroughly understand nvOC at a reasonably low level, I am stumped by one question. What is calling/launching 2unix at boot and again if 3main is killed and 2unix "falls out"?
It appears to be part of gnome-session but I am not yet familiar enough with Ubuntu to find it. I see the auto login setup in /etc/lightdm/lightdm.conf but I don't see anything launching that explicitly in .bashrc or .profile. What am I missing?
Thanks in advance.
Guake terminal is involved Yes. I found gnome-terminal.desktop and guake:guake.desktop in /home/m1/.config/autostart but I am still not putting all of the pieces of the puzzle together yet. I don't see any mention of 2unix being launched there. For those of you that care, I found it: m1 1943 1703 0 12:02 ? 00:00:00 python2 -m guake.mainm1 1999 1943 0 12:02 ? 00:00:00 gnome-pty-helper m1 2000 1943 0 12:02 pts/16 00:00:00 /bin/bash m1 2085 1943 0 12:02 pts/18 00:00:00 /bin/bash m1 2316 1943 0 12:03 pts/21 00:00:00 /bin/bash Thx. Did you find the location of guake.main?
|
|
|
|
codereddew12
Newbie
Offline
Activity: 36
Merit: 0
|
|
November 05, 2017, 07:07:26 AM |
|
By the way, a little off topic, but do you guys think it's ok to run 12 GPUs (all 1070s except for 2 which are 1060s) on two EVGA G3 850W PSUs? I downvolted all of the cards and each 1070 is right around 100W/piece and 1060s are roughly 80W. Been stable now for over a week, just to get some feedback regarding this setup.
|
|
|
|
ComputerGenie
|
|
November 05, 2017, 07:23:29 AM |
|
By the way, a little off topic, but do you guys think it's ok to run 12 GPUs (all 1070s except for 2 which are 1060s) on two EVGA G3 850W PSUs? I downvolted all of the cards and each 1070 is right around 100W/piece and 1060s are roughly 80W. Been stable now for over a week, just to get some feedback regarding this setup.
There is no part of me that will ever understand the idea behind taking 10 cards and intentionally turning them into 7
|
If you have to ask "why?", you wouldn`t understand my answer. Always be on the look out, because you never know when you'll be stalked by hit-men that eat nothing but cream cheese....
|
|
|
codereddew12
Newbie
Offline
Activity: 36
Merit: 0
|
|
November 05, 2017, 07:38:08 AM |
|
By the way, a little off topic, but do you guys think it's ok to run 12 GPUs (all 1070s except for 2 which are 1060s) on two EVGA G3 850W PSUs? I downvolted all of the cards and each 1070 is right around 100W/piece and 1060s are roughly 80W. Been stable now for over a week, just to get some feedback regarding this setup.
There is no part of me that will ever understand the idea behind taking 10 cards and intentionally turning them into 7 What do you mean exactly? I have a pretty small setup (~20 GPUs), so I just try to consolidate whenever possible.
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
November 05, 2017, 07:41:02 AM |
|
By the way, a little off topic, but do you guys think it's ok to run 12 GPUs (all 1070s except for 2 which are 1060s) on two EVGA G3 850W PSUs? I downvolted all of the cards and each 1070 is right around 100W/piece and 1060s are roughly 80W. Been stable now for over a week, just to get some feedback regarding this setup.
There is no part of me that will ever understand the idea behind taking 10 cards and intentionally turning them into 7 I am with @ComputerGenie. Is there a reason you are not running individual power limits and clocks? Worst case, I would remove the 1060's and just run the 1070's correctly.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
November 05, 2017, 07:55:03 AM |
|
By the way, a little off topic, but do you guys think it's ok to run 12 GPUs (all 1070s except for 2 which are 1060s) on two EVGA G3 850W PSUs? I downvolted all of the cards and each 1070 is right around 100W/piece and 1060s are roughly 80W. Been stable now for over a week, just to get some feedback regarding this setup.
There is no part of me that will ever understand the idea behind taking 10 cards and intentionally turning them into 7 I am with @ComputerGenie. Is there a reason you are not running individual power limits and clocks? Worst case, I would remove the 1060's and just run the 1070's correctly. Agree, 80 W for 1060 is not so low, but 100 for 1070 is too low, what are your hash rates with 1070 ? I run my 1070 rig at 125 W, oc 125, cc 600 getting 460-470 sol/s and 1060 rig with 85W, oc 125, cc, 600 getting 300 sol/s
|
|
|
|
JayneL
Member
Offline
Activity: 104
Merit: 10
|
|
November 05, 2017, 10:41:13 AM |
|
Hi guys can you help me how to add more algo on SALTER_NICEHASH? I want to add cryptonight so that it can automatically switch to that algo pls tnx tnx tnx Hi Fullzero or anyone here figure it how? i tried to copy the settings of other algo and change the settings but it gets buggy and got insane income result lol
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
November 05, 2017, 10:41:49 AM |
|
Installed v19-1.4 yesterday on a new rig to test a new card.
sudo: unable to resolve host gtx1080ti-r1
Check your /etc/hosts file. It would appear that you are missing the entry for your miner - gtx1080ti-r1. m1@Miner2:~$ cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 Miner2
# The following lines are desirable for IPv6 capable hosts . . . In the example, my host is named Miner2 and I have the necessary entry for it in my hosts file. Hope this helps.
|
|
|
|
codereddew12
Newbie
Offline
Activity: 36
Merit: 0
|
|
November 05, 2017, 10:43:51 AM |
|
By the way, a little off topic, but do you guys think it's ok to run 12 GPUs (all 1070s except for 2 which are 1060s) on two EVGA G3 850W PSUs? I downvolted all of the cards and each 1070 is right around 100W/piece and 1060s are roughly 80W. Been stable now for over a week, just to get some feedback regarding this setup.
There is no part of me that will ever understand the idea behind taking 10 cards and intentionally turning them into 7 I am with @ComputerGenie. Is there a reason you are not running individual power limits and clocks? Worst case, I would remove the 1060's and just run the 1070's correctly. Agree, 80 W for 1060 is not so low, but 100 for 1070 is too low, what are your hash rates with 1070 ? I run my 1070 rig at 125 W, oc 125, cc 600 getting 460-470 sol/s and 1060 rig with 85W, oc 125, cc, 600 getting 300 sol/s Been mining ETH and my hasharates have been 30-31 per 1070. I never thought you could have a PL "too low" if it's within the supported wattage of the card. Of course, some GPUs, like the MSI 1070 Gaming X requires minimum 115 watts but some other 1070s can go to as low as 90 so that's why I say average is roughly 100W per card. It's bee stable like this for nearly 2 weeks now so I don't see why it's a big issue if it's stable?
|
|
|
|
|