[ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows)

[starcrys]

Maybe there is an issue with dtsm and the zpool stratum ? also what cmdline do you use to start it ?

Have tried using zm.exe --server equihash.mine.zpool.ca  --port 2142 --user 17g2APRaoDz17mM4Vw9R1hSR6juVnKXGrk --pass x --telemetry 127.0.0.1:2222 --time

and zm --server equihash.mine.zpool.ca  --port 2142 --user 17g2APRaoDz17mM4Vw9R1hSR6juVnKXGrk --pass x --telemetry 127.0.0.1:2222 --time

Both were the same, didn't returned any shares.

there's been issue's with the zpool stratum server try a different pool see if that fixes your problems

Okay, checked with MPH pool. I've got some shares seen below.

2017-12-11 8:41:46 PM|#  zm 0.5.6
2017-12-11 8:41:46 PM|#  GPU0 + GeForce GTX 1080         MB: 8192  PCI: 1:0
2017-12-11 8:41:46 PM|
2017-12-11 8:41:46 PM|#  telemetry server started
2017-12-11 8:41:46 PM|#  GPU0  connected to: asia.equihash-hub.miningpoolhub.com:17023
2017-12-11 8:41:50 PM|#  GPU0  server set difficulty to: 000080000000000000000000...
2017-12-11 8:42:11 PM|>  GPU0  52C  Sol/s: 508.9  Sol/W: 2.62  Avg: 508.9  I/s: 272.0  Sh: 0.00   . .
2017-12-11 8:42:31 PM|   GPU0  61C  Sol/s: 498.8  Sol/W: 2.59  Avg: 503.8  I/s: 270.2  Sh: 1.50   1.00 71  +
2017-12-11 8:42:51 PM|>  GPU0  65C  Sol/s: 501.5  Sol/W: 2.57  Avg: 503.1  I/s: 269.5  Sh: 1.00   1.00 71
2017-12-11 8:43:11 PM|   GPU0  59C  Sol/s: 498.7  Sol/W: 2.77  Avg: 502.0  I/s: 262.7  Sh: 0.75   1.00 71
2017-12-11 8:43:31 PM|   GPU0  56C  Sol/s: 504.0  Sol/W: 2.86  Avg: 502.4  I/s: 266.8  Sh: 0.60   1.00 71
2017-12-11 8:43:39 PM|#  GPU0  server set difficulty to: 0000b6db6db6db6db8000000...
2017-12-11 8:43:51 PM|>  GPU0  55C  Sol/s: 494.9  Sol/W: 2.90  Avg: 501.1  I/s: 264.5  Sh: 0.50   1.00 71
2017-12-11 8:44:11 PM|   GPU0  55C  Sol/s: 499.1  Sol/W: 2.95  Avg: 500.9  I/s: 267.0  Sh: 0.86   1.00 70  +
2017-12-11 8:44:31 PM|   GPU0  55C  Sol/s: 504.2  Sol/W: 2.97  Avg: 501.3  I/s: 267.3  Sh: 0.75   1.00 70
2017-12-11 8:44:51 PM|>  GPU0  55C  Sol/s: 488.3  Sol/W: 2.98  Avg: 499.8  I/s: 264.2  Sh: 0.67   1.00 70
2017-12-11 8:45:12 PM|   GPU0  55C  Sol/s: 501.7  Sol/W: 3.01  Avg: 500.0  I/s: 264.8  Sh: 0.60   1.00 70
2017-12-11 8:45:29 PM|#  GPU0  server set difficulty to: 000105397829cbc160000000...
2017-12-11 8:45:32 PM|>  GPU0  55C  Sol/s: 503.2  Sol/W: 3.02  Avg: 500.3  I/s: 266.1  Sh: 0.55   1.00 70
2017-12-11 8:45:52 PM|   GPU0  55C  Sol/s: 499.4  Sol/W: 3.04  Avg: 500.2  I/s: 266.3  Sh: 0.50   1.00 70

Seems zpool has some problems then.

[1714123768]

1714123768

[1714123768]

1714123768

[1714123768]

1714123768

[1714123768]

1714123768

[MagicSmoker]

So, why would dstm 0.5.6 report "inf" (presumably "infinite") for Sol/w with a GTX 1050 Ti? Driver version is 388.59, so I am up to date there.

Sorry if this question was covered in one of the preceding 1637 posts, but thread search on this forum is terminally defective and a google site search just pulled up reported Sol/w results from various cards.

Otherwise, dstm seems to be a winner - the hashrate is slightly lower than bminer, but that is more than made up for by about 30W less average power draw for my rinky-dink single card test setup.

[chuck732]

I'm new to dstm and would like to know if you can use dstm on flypool?

[starcrys]

Been trying out the program. I'm not sure why but my shares are not submitting correctly...

2017-12-10 11:43:35 PM|#  zm 0.5.6
2017-12-10 11:43:35 PM|#  GPU0 + GeForce GTX 1080         MB: 8192  PCI: 1:0
2017-12-10 11:43:35 PM|
2017-12-10 11:43:35 PM|#  telemetry server started
2017-12-10 11:43:35 PM|#  GPU0  connected to: equihash.mine.zpool.ca:2142
2017-12-10 11:43:39 PM|#  GPU0  server supports extranonce
2017-12-10 11:43:39 PM|#  GPU0  server set difficulty to: 00002003e07c0f81f0000000...
2017-12-10 11:44:00 PM|>  GPU0  54C  Sol/s: 187.2  Sol/W: 1.34  Avg: 187.2  I/s: 97.3   Sh: 0.00   . .
2017-12-10 11:44:20 PM|>  GPU0  55C  Sol/s: 175.1  Sol/W: 1.30  Avg: 181.1  I/s: 91.8   Sh: 0.00   . .
2017-12-10 11:44:41 PM|>  GPU0  54C  Sol/s: 170.8  Sol/W: 1.28  Avg: 177.7  I/s: 91.6   Sh: 0.00   . .
2017-12-10 11:45:01 PM|   GPU0  54C  Sol/s: 233.5  Sol/W: 1.37  Avg: 191.7  I/s: 124.0  Sh: 0.00   . .


Can anyone help me on this? I'm really lost.

PS: Ignore the sol/s values, I was doing something else and it lagged the mining process.

The server sets a pretty high difficulty so it will take some time (on average) to find a share especially with the low solution rate you have.

Hm...But my actual sol/s is about 490-500 actually (I was double opening 2 miners at that time, hence the 170-230 sol/s rate). I've tried using MPH, and it worked perfectly fine.

2017-12-11 8:41:46 PM|#  zm 0.5.6
2017-12-11 8:41:46 PM|#  GPU0 + GeForce GTX 1080         MB: 8192  PCI: 1:0
2017-12-11 8:41:46 PM|
2017-12-11 8:41:46 PM|#  telemetry server started
2017-12-11 8:41:46 PM|#  GPU0  connected to: asia.equihash-hub.miningpoolhub.com:17023
2017-12-11 8:41:50 PM|#  GPU0  server set difficulty to: 000080000000000000000000...
2017-12-11 8:42:11 PM|>  GPU0  52C  Sol/s: 508.9  Sol/W: 2.62  Avg: 508.9  I/s: 272.0  Sh: 0.00   . .
2017-12-11 8:42:31 PM|   GPU0  61C  Sol/s: 498.8  Sol/W: 2.59  Avg: 503.8  I/s: 270.2  Sh: 1.50   1.00 71  +
2017-12-11 8:42:51 PM|>  GPU0  65C  Sol/s: 501.5  Sol/W: 2.57  Avg: 503.1  I/s: 269.5  Sh: 1.00   1.00 71
2017-12-11 8:43:11 PM|   GPU0  59C  Sol/s: 498.7  Sol/W: 2.77  Avg: 502.0  I/s: 262.7  Sh: 0.75   1.00 71
2017-12-11 8:43:31 PM|   GPU0  56C  Sol/s: 504.0  Sol/W: 2.86  Avg: 502.4  I/s: 266.8  Sh: 0.60   1.00 71

I guess there's probably something not very well with the server from zpool?

[dandyqb]

I'm new to dstm and would like to know if you can use dstm on flypool?

that's my setup right now 

[chuck732]

What OS are you using?

I'm new to dstm and would like to know if you can use dstm on flypool?

that's my setup right now 

[marti718]

Does anyone else get trouble with ZM and Zenmine.pro? no matter what server of theirs is set?

I get this on all miners every 5 mins approx;

Code:

GPU0  69C  Sol/s: 659.9  Sol/W: 3.65  Avg: 656.1  I/s: 354.2  Sh: 2.40  1.00 1727 +
   GPU1  79C  Sol/s: 626.0  Sol/W: 3.81  Avg: 621.1  I/s: 331.5  Sh: 2.40  1.00 3086 +++
   GPU2  71C  Sol/s: 461.8  Sol/W: 3.10  Avg: 464.9  I/s: 248.5  Sh: 0.90  1.00 1979
   ========== Sol/s: 1747.7 Sol/W: 3.52  Avg: 1742.1 I/s: 934.2  Sh: 5.70  1.00 2264
#  connection closed by server r:0
#  reconnecting
#  GPU0  connected to: us.zenmine.pro:9009
#  GPU1  connected to: us.zenmine.pro:9009
#  GPU2  connected to: us.zenmine.pro:9009
#  GPU0  server set difficulty to: 000471c71c71c71c69e06522...
#  GPU1  server set difficulty to: 000471c71c71c71c69e06522...
#  GPU2  server set difficulty to: 000471c71c71c71c69e06522...
>  GPU0  65C  Sol/s: 670.7  Sol/W: 3.70  Avg: 670.7  I/s: 360.3  Sh: 6.00  1.00 1495 ++
>  GPU1  75C  Sol/s: 633.1  Sol/W: 3.81  Avg: 633.1  I/s: 337.9  Sh: 0.00  . .
>  GPU2  65C  Sol/s: 459.9  Sol/W: 3.20  Avg: 459.9  I/s: 250.8  Sh: 0.00  . .

Yes, I get it also. I've searched for an answer and have posted about it but no reply so far. I switched to Zecminer and the hashrate is 10% lower, but that is better than all the disconnects I get.

[dandyqb]

What OS are you using?

I'm new to dstm and would like to know if you can use dstm on flypool?

that's my setup right now 

win 10 64bit ver 1703

[Delota]

Works quite well for me using SMOS

With the GTX 1080 Ti on 200W, 1800 core, 5080 mem
I am getting:

Code:

GPU0 51C Sol/s: 707.4 Sol/W: 3.58 Avg: 714.2 I/s: 382.1 Sh: 3.62 1.00 30 
GPU0 51C Sol/s: 701.1 Sol/W: 3.58 Avg: 714.0 I/s: 382.0 Sh: 3.73 1.00 33 
GPU0 51C Sol/s: 719.2 Sol/W: 3.58 Avg: 714.1 I/s: 382.0 Sh: 3.83 1.00 30 
GPU0 51C Sol/s: 728.6 Sol/W: 3.58 Avg: 714.4 I/s: 381.7 Sh: 3.82 1.00 31 
GPU0 51C Sol/s: 712.8 Sol/W: 3.58 Avg: 714.3 I/s: 382.0 Sh: 3.86 1.00

I haven't OC'd the card that much, only +150Core, and +150 mem

[QuintLeo]

All of my testing of dstm to date has been on flypool.

[Infpwnz]

So idk if this is a MiningPoolHub problem or dstm miner problem but im getting paid really low in BTG on mph.

Should be about 0.057 in 24 hours with 2030kh and its 0.047?
Anyone else mining BTG on mph? results?

Edit: So I just switched to Bminer and my hashrate and income appear to be like they should be on MPH.
it WAS a miner problem.
Even tho the miner was showing good hashrate the pool was showing 1.7kh
My miner shows 2050 now and the pool says the same.

[Kejvu]

Hello, is this ok for mining Bitcoin Gold with dstm's on coinotron?
It finded just 1 share with 1060 and 1080ti isnt?
and what "unknown method client.get_version" means?

Code:

2017-12-12 08.50.45|#  telemetry server started
2017-12-12 08.50.45|#  GPU0  connected to: coinotron.com:3349
2017-12-12 08.50.45|unknown method client.get_version
2017-12-12 08.50.46|#  GPU1  connected to: coinotron.com:3349
2017-12-12 08.50.46|unknown method client.get_version
2017-12-12 08.50.48|#  GPU0  server supports extranonce
2017-12-12 08.50.48|#  GPU1  server supports extranonce
2017-12-12 08.50.48|#  GPU0  server set difficulty to: 0000cccccccc000000000000...
2017-12-12 08.50.50|#  GPU1  server set difficulty to: 0000cccccccc000000000000...
2017-12-12 08.51.08|>  GPU0  59C  Sol/s: 747.2  Sol/W: 3.19  Avg: 747.2  I/s: 402.0  Sh: 0.00   . .
2017-12-12 08.51.10|>  GPU1  64C  Sol/s: 334.4  Sol/W: 3.40  Avg: 334.4  I/s: 175.9  Sh: 0.00   . .
2017-12-12 08.51.10|   ========== Sol/s: 1081.6 Sol/W: 3.30  Avg: 1081.6 I/s: 577.9  Sh: 0.00   . .
2017-12-12 08.51.28|>  GPU0  60C  Sol/s: 748.7  Sol/W: 3.20  Avg: 747.9  I/s: 400.8  Sh: 0.00   . .
2017-12-12 08.51.30|>  GPU1  65C  Sol/s: 326.2  Sol/W: 3.31  Avg: 330.3  I/s: 175.0  Sh: 0.00   . .
2017-12-12 08.51.30|   ========== Sol/s: 1074.9 Sol/W: 3.25  Avg: 1078.3 I/s: 575.8  Sh: 0.00   . .
2017-12-12 08.51.48|>  GPU0  60C  Sol/s: 743.6  Sol/W: 3.21  Avg: 746.5  I/s: 400.8  Sh: 0.00   . .
2017-12-12 08.51.50|>  GPU1  65C  Sol/s: 320.1  Sol/W: 3.25  Avg: 326.9  I/s: 174.6  Sh: 0.00   . .
2017-12-12 08.51.50|   ========== Sol/s: 1063.6 Sol/W: 3.23  Avg: 1073.4 I/s: 575.4  Sh: 0.00   . .
2017-12-12 08.52.08|>  GPU0  60C  Sol/s: 757.9  Sol/W: 3.23  Avg: 749.3  I/s: 400.6  Sh: 0.00   . .
2017-12-12 08.52.11|>  GPU1  65C  Sol/s: 327.5  Sol/W: 3.24  Avg: 327.1  I/s: 173.1  Sh: 0.00   . .
2017-12-12 08.52.11|   ========== Sol/s: 1085.5 Sol/W: 3.24  Avg: 1076.4 I/s: 573.8  Sh: 0.00   . .
2017-12-12 08.52.29|>  GPU0  60C  Sol/s: 742.5  Sol/W: 3.22  Avg: 748.0  I/s: 400.5  Sh: 0.00   . .
2017-12-12 08.52.31|>  GPU1  65C  Sol/s: 321.6  Sol/W: 3.23  Avg: 326.0  I/s: 173.3  Sh: 0.00   . .
2017-12-12 08.52.31|   ========== Sol/s: 1064.1 Sol/W: 3.23  Avg: 1073.9 I/s: 573.8  Sh: 0.00   . .
2017-12-12 08.52.49|>  GPU0  60C  Sol/s: 739.7  Sol/W: 3.22  Avg: 746.6  I/s: 400.6  Sh: 0.00   . .
2017-12-12 08.52.51|   GPU1  65C  Sol/s: 320.7  Sol/W: 3.22  Avg: 325.1  I/s: 173.8  Sh: 0.00   . .
2017-12-12 08.52.51|   ========== Sol/s: 1060.4 Sol/W: 3.22  Avg: 1071.7 I/s: 574.4  Sh: 0.00   . .
2017-12-12 08.53.09|>  GPU0  60C  Sol/s: 749.5  Sol/W: 3.22  Avg: 747.0  I/s: 400.7  Sh: 0.00   . .
2017-12-12 08.53.11|>  GPU1  65C  Sol/s: 327.4  Sol/W: 3.22  Avg: 325.4  I/s: 174.1  Sh: 0.00   . .
2017-12-12 08.53.11|   ========== Sol/s: 1076.9 Sol/W: 3.22  Avg: 1072.4 I/s: 574.8  Sh: 0.00   . .
2017-12-12 08.53.29|   GPU0  60C  Sol/s: 742.8  Sol/W: 3.22  Avg: 746.5  I/s: 400.7  Sh: 0.00   . .
2017-12-12 08.53.31|>  GPU1  66C  Sol/s: 330.6  Sol/W: 3.22  Avg: 326.1  I/s: 174.4  Sh: 0.00   . .
2017-12-12 08.53.31|   ========== Sol/s: 1073.4 Sol/W: 3.22  Avg: 1072.6 I/s: 575.0  Sh: 0.00   . .
2017-12-12 08.53.49|>  GPU0  60C  Sol/s: 752.8  Sol/W: 3.22  Avg: 747.2  I/s: 400.3  Sh: 0.00   . .
2017-12-12 08.53.51|   GPU1  65C  Sol/s: 320.9  Sol/W: 3.22  Avg: 325.5  I/s: 173.3  Sh: 0.00   . .
2017-12-12 08.53.51|   ========== Sol/s: 1073.7 Sol/W: 3.22  Avg: 1072.7 I/s: 573.6  Sh: 0.00   . .
2017-12-12 08.54.09|>  GPU0  60C  Sol/s: 747.1  Sol/W: 3.22  Avg: 747.2  I/s: 400.5  Sh: 0.00   . .
2017-12-12 08.54.11|>  GPU1  66C  Sol/s: 323.6  Sol/W: 3.21  Avg: 325.3  I/s: 174.0  Sh: 0.00   . .
2017-12-12 08.54.11|   ========== Sol/s: 1070.7 Sol/W: 3.22  Avg: 1072.5 I/s: 574.4  Sh: 0.00   . .
2017-12-12 08.54.29|   GPU0  61C  Sol/s: 746.4  Sol/W: 3.22  Avg: 747.1  I/s: 400.3  Sh: 0.00   . .
2017-12-12 08.54.31|>  GPU1  66C  Sol/s: 325.2  Sol/W: 3.21  Avg: 325.3  I/s: 173.8  Sh: 0.00   . .
2017-12-12 08.54.31|   ========== Sol/s: 1071.6 Sol/W: 3.22  Avg: 1072.4 I/s: 574.1  Sh: 0.00   . .
2017-12-12 08.54.49|>  GPU0  61C  Sol/s: 737.0  Sol/W: 3.22  Avg: 746.3  I/s: 400.5  Sh: 0.00   . .
2017-12-12 08.54.51|   GPU1  66C  Sol/s: 326.7  Sol/W: 3.21  Avg: 325.4  I/s: 174.0  Sh: 0.25   1.00 82  +
2017-12-12 08.54.51|   ========== Sol/s: 1063.8 Sol/W: 3.22  Avg: 1071.7 I/s: 574.4  Sh: 0.25   1.00 82
2017-12-12 08.55.09|>  GPU0  61C  Sol/s: 740.2  Sol/W: 3.22  Avg: 745.8  I/s: 400.4  Sh: 0.00   . .
2017-12-12 08.55.11|>  GPU1  66C  Sol/s: 318.9  Sol/W: 3.21  Avg: 324.9  I/s: 175.1  Sh: 0.23   1.00 82
2017-12-12 08.55.11|   ========== Sol/s: 1059.1 Sol/W: 3.21  Avg: 1070.7 I/s: 575.4  Sh: 0.23   1.00 82
2017-12-12 08.55.30|   GPU0  61C  Sol/s: 745.1  Sol/W: 3.22  Avg: 745.8  I/s: 400.4  Sh: 0.00   . .
2017-12-12 08.55.31|>  GPU1  66C  Sol/s: 328.1  Sol/W: 3.21  Avg: 325.1  I/s: 174.5  Sh: 0.21   1.00 82
2017-12-12 08.55.31|   ========== Sol/s: 1073.3 Sol/W: 3.21  Avg: 1070.9 I/s: 574.9  Sh: 0.21   1.00 82
2017-12-12 08.55.50|>  GPU0  61C  Sol/s: 743.8  Sol/W: 3.22  Avg: 745.6  I/s: 400.4  Sh: 0.00   . .   *
2017-12-12 08.55.51|   GPU1  66C  Sol/s: 328.5  Sol/W: 3.21  Avg: 325.4  I/s: 174.1  Sh: 0.20   1.00 82
2017-12-12 08.55.51|   ========== Sol/s: 1072.3 Sol/W: 3.21  Avg: 1071.0 I/s: 574.4  Sh: 0.20   1.00 82
2017-12-12 08.56.10|>  GPU0  61C  Sol/s: 749.1  Sol/W: 3.22  Avg: 745.8  I/s: 400.3  Sh: 0.00   . .
2017-12-12 08.56.12|>  GPU1  66C  Sol/s: 328.7  Sol/W: 3.21  Avg: 325.6  I/s: 174.5  Sh: 0.19   1.00 82
2017-12-12 08.56.12|   ========== Sol/s: 1077.8 Sol/W: 3.22  Avg: 1071.4 I/s: 574.8  Sh: 0.19   1.00 82

[chuck732]

Thank you sir. Can you help me with one more thing? I use SMOS for a while now no problems. Just want to try a different miner. I've been using ewbf on flypool. Ok on SMOS dashboard for me the dstm has a string for miningpoolhub. Here's what I'm talking about

--server europe.equihash-hub.miningpoolhub.com --port 20570 --user youraccount.$rigName --pass x

How would I change it to flypool? Would I use the same string that is in my miner for ewbf/flypool?

What OS are you using?

I'm new to dstm and would like to know if you can use dstm on flypool?

that's my setup right now 

win 10 64bit ver 1703

[dstm]

New Version 0.5.7

reduce cpu load
minor performance improvements
con: use single pool connection
con: ssl: clear session data before reconnect
nvml: handle invalid values


This release contains quite some technical work/optimizations, which results most notably in a lower cpu load - about 40% - 30%. It also contains minor solver performance improvements - most notable on an 1060 - about 0.5%, pretty small - however it's still there. ZM uses now a single connection to the pool, since some pools/routers seemed to have difficulties with multiple connections - this might help people who had regular disconnects. Pools which adjust the difficulty based on the share rate won't be able to distinguish between the GPUs because zm uses a single connections now - so the difficulty and thus the share rate might change.

People who requested failover pool support: I'm planning to support it in the next release, I'm releasing this iteration first to make sure the transition to a single connection works as expected.

[Seb83]

New Version 0.5.7

reduce cpu load
minor performance improvements
con: use single pool connection
con: ssl: clear session data before reconnect
nvml: handle invalid values


This release contains quite some technical work/optimizations, which results most notably in a lower cpu load - about 40% - 30%. It also contains minor solver performance improvements - most notable on an 1060 - about 0.5%, pretty small - however it's still there. ZM uses now a single connection to the pool, since some pools/routers seemed to have difficulties with multiple connections - this might help people who had regular disconnects. Pools which adjust the difficulty based on the share rate won't be able to distinguish between the GPUs because zm uses a single connections now - so the difficulty and thus the share rate might change.

People who requested failover pool support: I'm planning to support it in the next release, I'm releasing this iteration first to make sure the transition to a single connection works as expected.

Nice improvement!
I'm testing right now on a small rig with 2x 1070 and 2x 1080ti (2330 sols)
I have more than half cpu load on windows 10, same hashrate.

IMO, it would be nice to also add an option to launch the miner with higher cpu priority (like ccminer --cpu-priority)
I change the priority in a BAT file, and it helps a lot.

[Nokia555]

EthMonitoring.com updated to 0.5.7 for EthControl

[Hekgrim]

New Version 0.5.7
nvml: handle invalid values

What does it mean?

[cTnko]

New Version 0.5.7

reduce cpu load
minor performance improvements
con: use single pool connection
con: ssl: clear session data before reconnect
nvml: handle invalid values


This release contains quite some technical work/optimizations, which results most notably in a lower cpu load - about 40% - 30%. It also contains minor solver performance improvements - most notable on an 1060 - about 0.5%, pretty small - however it's still there. ZM uses now a single connection to the pool, since some pools/routers seemed to have difficulties with multiple connections - this might help people who had regular disconnects. Pools which adjust the difficulty based on the share rate won't be able to distinguish between the GPUs because zm uses a single connections now - so the difficulty and thus the share rate might change.

People who requested failover pool support: I'm planning to support it in the next release, I'm releasing this iteration first to make sure the transition to a single connection works as expected.

Thank you for an awesome update, the overall cpu usage on my 8 GPU rig dropped from 45-50% to 25-30% which is quite significant improvement.
I can also see the 0.5% improvement on the 1060 cards, great job!

[chuck732]

Can some help me with this?

I use SMOS for a while now no problems. Just want to try a different miner. I've been using ewbf on flypool. Ok on SMOS dashboard for me the dstm has a string for miningpoolhub. Here's what I'm talking about

--server europe.equihash-hub.miningpoolhub.com --port 20570 --user youraccount.$rigName --pass x

How would I change it to flypool? Would I use the same string that is in my miner for ewbf/flypool?

[Dylmine]

Is there any way I can disable GPU0 in this miner and let zm run on other Gpus?