PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[Chance321]

Best for me is the blockchain driver by amd

[infectedmushi]

FFS mate..... you had to quote the whole f***ing OP...?

worse, you didn't asked any question.....

[Bird333]

Hello guys, hello PhoenixMiner.
I try the phoenix miner v2.9e upgrade to 3.0C, I liked it,but He will not Get the value for Hardware control options -cclock -cvddc -mclock -mvddc , which command I set up to do this.
I have amd xfx rx580 8gb gts xxx 8xcard in Rig

Thanks for your reply

[dazmann]

I have a suggestion:

When closing the miner and if you are using it to set clocks and vddc it will reset the clocks and vddc to the standards. What happened to me was that doing it with a 6 GPU and 1000W PSU computer simply crashed due to overload. What I do when I need to close the miner is pause the gpus so they go to idle clocks and vddc and only when most of them are idling I close the miner. Would be interesting to add an option so it will pause the gpus then set the clock back or something that would not make the rig overload due to reseting its configuration all at the same time.

[REF Crypto]

After download, the antivirus software show file has virus ?

[DireWolfM14]

After download, the antivirus software show file has virus ?

That's normal, most of us deal with it by creating a folder for mining programs, and adding that folder as an exception in Windows Defender.

[TNguyen501]

Running 7 AMD gpus. Reported Hashrate is 200.9. At first the hashrate was doing around 190 something but as time pass by it current hashrate get lower and lower. After a day it reported hashrate is still 200 but the current hashrate is 159.2 and average hashrate is 161.

[Bird333]

janding and Phoenixminer Team

I want to say that the Phoenixminer will not receive the given commands in .bat file, when I look at Hwinfo i Gpu-z, I still have a higher value than the specified in the .bat file on -mvddc and -cvddc
And just to say when i put those same comand in Clay v11.8 everything is Ok.

Thanks for replay

[teamsorad]

Are we suppose to be using crimson or adrenaline? I have 8 580s and can mine fine with crimson beta but I can't get any version of adrenaline to work. I am on windows 10 1709. I want to be able to use the bat file for overclocking

phoenix just hangs


C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>REM

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>REM Example bat file for starting PhoenixMiner.exe to mine ETH

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>REM

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>setx GPU_FORCE_64BIT_PTR 0

SUCCESS: Specified value was saved.

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>setx GPU_MAX_HEAP_SIZE 100

SUCCESS: Specified value was saved.

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>setx GPU_USE_SYNC_OBJECTS 1

SUCCESS: Specified value was saved.

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>setx GPU_MAX_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>setx GPU_SINGLE_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>REM IMPORTANT: Replace the ETH address with your own ETH wallet address in the -wal option (Rig001 is the name of the rig)

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>PhoenixMiner.exe -pool eu2.ethermine.org:4444 -pool2 us2.ethermine.org:4444 -wal 0xE2d5DeBE9D221b44913f9E0A318f114b22B174e6.Rig1 -proto 3 -amd -tt 65 -tstop 85 -fanmin 40 -fanmax 100 -cvddc 925 -mvddc 925 -gser 1 -cclock 1200 -mclock 2100,2100,2100,2015,2060,2070,2020,2260
Phoenix Miner 3.0c Windows/msvc - Release
-----------------------------------------

[teamsorad]

well I got it to mine in 1709 with 18.3.4 but now the cards are only mining at 17 each vs 30+ with crimson. (compute) is on

2018.06.26:02:07:05.063: main Phoenix Miner 3.0c Windows/msvc - Release
2018.06.26:02:07:05.063: main Cmd line: -pool eu2.ethermine.org:4444 -pool2 us2.ethermine.org:4444 -wal 0xE2d5DeBE9D221b44913f9E0A318f114b22B174e6.Rig1 -proto 3 -amd -tt 65 -tstop 85 -fanmin 40 -fanmax 100 -cvddc 925 -mvddc 925 -gser 1 -cclock 1200 -mclock 2100,2100,2100,2015,2060,2070,2020,2260
2018.06.26:02:07:10.930: main Available GPUs for mining:
2018.06.26:02:07:10.930: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU2: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU3: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU4: Radeon RX 580 Series (pcie , OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU5: Radeon RX 580 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU6: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU7: Radeon RX 580 Series (pcie 13), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU8: Radeon RX 580 Series (pcie 14), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:11.093: main ADL library initialized
2018.06.26:02:07:11.376: main Listening for CDM remote manager at port 3333 in read-only mode
2018.06.26:02:07:11.376: main Eth: the pool list contains 4 pools
2018.06.26:02:07:11.376: main Eth: primary pool: eu2.ethermine.org:4444
2018.06.26:02:07:11.376: main Starting GPU mining
2018.06.26:02:07:11.376: main Matched GPU1 to ADL adapter index 32 (method 1)
2018.06.26:02:07:12.115: main GPU1: Created ADL monitor for adapter 32; overdrive version: 7
2018.06.26:02:07:12.115: main GPU1: using AMD driver ver 18.3.4
2018.06.26:02:07:12.116: main Matched GPU2 to ADL adapter index 0 (method 1)
2018.06.26:02:07:12.605: main GPU2: Created ADL monitor for adapter 0; overdrive version: 7
2018.06.26:02:07:12.607: main GPU2: using AMD driver ver 18.3.4
2018.06.26:02:07:12.607: main Matched GPU3 to ADL adapter index 16 (method 1)
2018.06.26:02:07:13.511: main GPU3: Created ADL monitor for adapter 16; overdrive version: 7
2018.06.26:02:07:13.511: main GPU3: using AMD driver ver 18.3.4
2018.06.26:02:07:13.511: main Matched GPU4 to ADL adapter index 48 (method 1)
2018.06.26:02:07:14.009: main GPU4: Created ADL monitor for adapter 48; overdrive version: 7
2018.06.26:02:07:14.010: main GPU4: using AMD driver ver 18.3.4
2018.06.26:02:07:14.010: main Matched GPU5 to ADL adapter index 112 (method 1)
2018.06.26:02:07:14.492: main GPU5: Created ADL monitor for adapter 112; overdrive version: 7
2018.06.26:02:07:14.492: main GPU5: using AMD driver ver 18.3.4
2018.06.26:02:07:14.492: main Matched GPU6 to ADL adapter index 80 (method 1)
2018.06.26:02:07:14.973: main GPU6: Created ADL monitor for adapter 80; overdrive version: 7
2018.06.26:02:07:14.973: main GPU6: using AMD driver ver 18.3.4
2018.06.26:02:07:14.974: main Matched GPU7 to ADL adapter index 96 (method 1)
2018.06.26:02:07:15.451: main GPU7: Created ADL monitor for adapter 96; overdrive version: 7
2018.06.26:02:07:15.452: main GPU7: using AMD driver ver 18.3.4
2018.06.26:02:07:15.452: main Matched GPU8 to ADL adapter index 64 (method 1)
2018.06.26:02:07:15.929: main GPU8: Created ADL monitor for adapter 64; overdrive version: 7
2018.06.26:02:07:15.929: main GPU8: using AMD driver ver 18.3.4
2018.06.26:02:07:15.930: wdog Starting watchdog thread
2018.06.26:02:07:15.931: main Eth: Connecting to ethash pool eu2.ethermine.org:4444 (proto: QtMiner)
2018.06.26:02:07:15.954: hwmc GPU1: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.958: hwmc GPU1: set VMEM clocks to 2100 MHz (Vddc 925 mV)
2018.06.26:02:07:15.963: hwmc GPU2: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.967: hwmc GPU2: set VMEM clocks to 2100 MHz (Vddc 925 mV)
2018.06.26:02:07:15.973: hwmc GPU3: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.977: hwmc GPU3: set VMEM clocks to 2100 MHz (Vddc 925 mV)
2018.06.26:02:07:15.981: hwmc GPU4: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.985: hwmc GPU4: set VMEM clocks to 2050 MHz (Vddc 925 mV)
2018.06.26:02:07:15.988: hwmc GPU5: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.991: hwmc GPU5: set VMEM clocks to 2060 MHz (Vddc 925 mV)
2018.06.26:02:07:15.995: hwmc GPU6: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.998: hwmc GPU6: set VMEM clocks to 2070 MHz (Vddc 925 mV)
2018.06.26:02:07:16.002: hwmc GPU7: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:16.005: hwmc GPU7: set VMEM clocks to 2050 MHz (Vddc 925 mV)
2018.06.26:02:07:16.012: hwmc GPU8: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:16.018: hwmc GPU8: set VMEM clocks to 2250 MHz (Vddc 925 mV)
2018.06.26:02:07:16.148: eths Eth: Connected to ethash pool eu2.ethermine.org:4444 (91.121.167.111)
2018.06.26:02:07:16.149: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_login","params":["0xE2d5DeBE9D221b44913f9E0A318f114b22B174e6.Rig1"]}

2018.06.26:02:07:16.192: main GPU1: 45C 0%, GPU2: 51C 41%, GPU3: 47C 0%, GPU4: 48C 0%, GPU5: 45C 0%, GPU6: 49C 41%, GPU7: 51C 41%, GPU8: 48C 0%
2018.06.26:02:07:16.321: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2018.06.26:02:07:16.321: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

[anbe2305]

For AMD cards use only 18.3.4  version Adrenalin , for Nvidia 391.35 drivers those are the most stable drivers for mining with Phoenix 3.0c.

[53nsk]

well I got it to mine in 1709 with 18.3.4 but now the cards are only mining at 17 each vs 30+ with crimson. (compute) is on

Try to add -altinit to config.

[big_daddy]

anyone here got tested the MSI armor 570 8GB Micron mem with PhoenixMiner 3.0c?

I would like to know the hashrates You got out

[LifeBasher]

Phoenix miner 3.0c work perfectly on my 2 rigs 6 MSI 580 8g gaming x and 6 580 8g v1. Both 185-187 hashrate and stable for more than 200h + and adrenaline 18.5.2 driver. And no parameters to the launcher except Mi and the gt after the auto setting gj guys!!
https://i.imgur.com/lsfVocJ_d.jpg?maxwidth=640&shape=thumb&fidelity=medium https://i.imgur.com/caZDtEu_d.jpg?maxwidth=640&shape=thumb&fidelity=medium

[duyvu1311]

I don't understand why this miner does not support DubaiCoin. I want to mine DBIX but my rigs often crash when switching DAG.

[odus709]

Please add MOAC coin also!

[agismaniax]

just want to know, is it possible if added a function to monitor the specific amount of rejected and or incorrect share then do restart miner?

[MaxMidnite]

What the plans for the next version, would be intresting to see what more can be done??

[human75]

Please add MOAC coin also!

I agree. please add Moag. as well. thx. in advance.

[teamsorad]

How do you find a certain gpu? according to the readme.....



Additionally, while the miner is running, you can use the following interactive commands
in the console window by pressing one of these keys:
  s   Print detailed statistics
  1-9 Pause/resume GPU1 ... GPU9 (if you have more than 9 GPUs, type 010 for card 10, 011 for card 11, etc.)
  p   Pause/resume the whole miner

I just press a number and it will stop the gpu from mining? The P command works but I can't get individual gpus to pause so I can find gpu 7

Any help would be appreciated