PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[gonzomon]

Can anyone help me with this?
I had my system running «fine», and i install a fresh new win10. Everything until this happen…

Note: Only one gpu connected and showing two gpu in 1 pcie.
         2018.07.22:21:10:32.125: main GPU1: Radeon RX 560 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 16 CUs
         2018.07.22:21:10:32.125: main GPU2: Radeon RX 560 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 16 CUs

Code:

2018.07.22:21:10:31.813: main Phoenix Miner 2.9e Windows/msvc - Release
2018.07.22:21:10:31.813: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
2018.07.22:21:10:31.813: main No CUDA driver found
2018.07.22:21:10:32.125: main Available GPUs for mining:
2018.07.22:21:10:32.125: main GPU1: Radeon RX 560 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 16 CUs
2018.07.22:21:10:32.125: main GPU2: Radeon RX 560 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 16 CUs
2018.07.22:21:10:32.125: main Increase the Windows page file size to at least 16 GB to avoid out of memory errors and unexpected crashes.
2018.07.22:21:10:32.136: main ADL library initialized
2018.07.22:21:10:32.838: main Listening for CDM remote manager at port 3333 in read-only mode
2018.07.22:21:10:32.839: main Eth: the pool list contains 4 pools
2018.07.22:21:10:32.839: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2018.07.22:21:10:32.839: main Starting GPU mining
2018.07.22:21:10:32.839: main Matched GPU1 to ADL adapter index 0 (method 1)
2018.07.22:21:10:32.850: main GPU1: Created ADL monitor for adapter 0; overdrive version: 7
2018.07.22:21:10:32.850: main GPU1: using AMD driver ver 18.7.1
2018.07.22:21:10:32.850: main Matched GPU2 to ADL adapter index 0 (method 1)
2018.07.22:21:10:32.862: main GPU2: Created ADL monitor for adapter 0; overdrive version: 7
2018.07.22:21:10:32.862: main GPU2: using AMD driver ver 18.7.1
2018.07.22:21:10:32.882: wdog Starting watchdog thread
2018.07.22:21:10:33.553: main Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: EthProxy)
2018.07.22:21:10:33.603: eths Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (188.165.239.100)
2018.07.22:21:10:33.683: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001"]}

2018.07.22:21:10:33.719: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2018.07.22:21:10:33.719: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2018.07.22:21:10:33.755: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0xfca6177e6b4073cfe2cdc8a1c31cb3ca251956fe262080192cb49c96795d1b82","0x8308d376eeb469b7ff84bd59c51988d9618b208dc3b951d1dc1918fa08306723","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5bbb90"]}
2018.07.22:21:10:33.755: eths Eth: New job #fca6177e from ssl://eu1.ethermine.org:5555; diff: 4000MH
2018.07.22:21:10:33.759: GPU1 GPU1: Starting up... (0)
2018.07.22:21:10:33.759: GPU1 Eth: Generating light cache for epoch #200
2018.07.22:21:10:33.770: main GPU1: 38C 0%, GPU2: 38C 0%
2018.07.22:21:10:33.771: GPU2 GPU2: Starting up... (0)
2018.07.22:21:10:34.265: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x93294373b2a858314742ae6834ac99f08b4964b16319ce30818bb709305e88b5","0x8308d376eeb469b7ff84bd59c51988d9618b208dc3b951d1dc1918fa08306723","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5bbb91"]}
2018.07.22:21:10:34.265: eths Eth: New job #93294373 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2018.07.22:21:10:36.766: GPU1 GPU1: Using new optimized OpenCL kernels (device name 'Baffin')
2018.07.22:21:10:36.766: GPU1 GPU1: Allocating DAG (2.58) GB; good for epoch up to #202
2018.07.22:21:10:36.766: GPU1 GPU1: Allocating light cache buffer (41.2) MB; good for epoch up to #202
2018.07.22:21:10:36.871: GPU1 GPU1: Generating DAG for epoch #200

[MikeGR7]

Hi guys,

My Windows got updated automatically

I have updated AMD drivers to 18.5.1

Please help!!!

Have been getting this error -

Code:

17734:13:29:53.886: main Phoneix Miner 2.8c Windows/msvc - Release
17734:13:29:53.886: main Cmd line: -epool asia1.ethermine.org:4444 -ewal 0xC34CA9A45F4db78e979F5D803d2a9B457824bCF3.axe -epsw x -mode 1 -ftime 10 -wd 0
17734:13:29:53.886: main The following options are not supported and are ignored:
17734:13:29:53.886: main   -mode
17734:13:29:53.887: main No CUDA driver found
17734:13:29:56.661: main Available GPUs for mining:
17734:13:29:56.663: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 36 CUs
17734:13:29:56.663: main GPU2: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 36 CUs
17734:13:29:56.663: main GPU3: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
17734:13:29:56.663: main GPU4: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 4 GB VRAM, 36 CUs
17734:13:29:56.663: main GPU5: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 4 GB VRAM, 36 CUs
17734:13:29:56.663: main GPU6: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 4 GB VRAM, 36 CUs
17734:13:29:56.821: main ADL library initialized
17734:13:29:57.309: main Listening for CDM remote manager at port 3333 in read-only mode
17734:13:29:57.311: main Eth: the pool list contains 3 pools
17734:13:29:57.311: main Eth: primary pool: asia1.ethermine.org:4444
17734:13:29:57.311: main Starting GPU mining
17734:13:29:57.312: main Matched GPU1 to ADL adapter index 64 (method 1)
17734:13:29:57.465: main GPU1: Created ADL monitor for adapter 64; overdrive version: 7
17734:13:29:57.465: main Matched GPU2 to ADL adapter index 0 (method 1)
17734:13:29:57.618: main GPU2: Created ADL monitor for adapter 0; overdrive version: 7
17734:13:29:57.618: main Matched GPU3 to ADL adapter index 80 (method 1)
17734:13:29:57.773: main GPU3: Created ADL monitor for adapter 80; overdrive version: 7
17734:13:29:57.773: main Matched GPU4 to ADL adapter index 48 (method 1)
17734:13:29:57.928: main GPU4: Created ADL monitor for adapter 48; overdrive version: 7
17734:13:29:57.928: main Matched GPU5 to ADL adapter index 16 (method 1)
17734:13:29:58.142: main GPU5: Created ADL monitor for adapter 16; overdrive version: 7
17734:13:29:58.142: main Matched GPU6 to ADL adapter index 32 (method 1)
17734:13:29:58.297: main GPU6: Created ADL monitor for adapter 32; overdrive version: 7
17734:13:29:58.300: main Eth: Connecting to ethash pool asia1.ethermine.org:4444 (proto: EthProxy)
17734:13:29:58.420: eths Eth: Connected to ethash pool asia1.ethermine.org:4444 (54.179.172.226)
17734:13:29:58.420: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0xC34CA9A45F4db78e979F5D803d2a9B457824bCF3.axe","x"]}

17734:13:29:58.517: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
17734:13:29:58.519: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

17734:13:29:58.526: main GPU1: 46C 0%, GPU2: 52C 0%, GPU3: 49C 0%, GPU4: 46C 0%, GPU5: 51C 0%, GPU6: 49C 0%
17734:13:29:58.545: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x575909c317345e81fa3365b667c08332ae4c0f23f98bfb37bdfe11f34a12120e","0x8308d376eeb469b7ff84bd59c51988d9618b208dc3b951d1dc1918fa08306723","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5bafa5"]}
17734:13:29:58.546: eths Eth: New job #575909c3 from asia1.ethermine.org:4444; diff: 4000MH
17734:13:29:58.550: GPU1 GPU1: Starting up... (0)
17734:13:29:58.550: GPU1 Eth: Generating light cache for epoch #200
17734:13:29:58.577: GPU2 GPU2: Starting up... (0)
17734:13:29:58.588: GPU3 GPU3: Starting up... (0)
17734:13:29:58.608: GPU4 GPU4: Starting up... (0)
17734:13:29:58.622: GPU5 GPU5: Starting up... (0)
17734:13:29:58.635: GPU6 GPU6: Starting up... (0)
17734:13:29:58.682: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x575909c317345e81fa3365b667c08332ae4c0f23f98bfb37bdfe11f34a12120e","0x8308d376eeb469b7ff84bd59c51988d9618b208dc3b951d1dc1918fa08306723","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5bafa5"]}
17734:13:30:01.030: GPU1 GPU1: Using new optimized OpenCL kernels (device name 'Ellesmere')
17734:13:30:01.031: GPU1 GPU1: Allocating DAG (2.58) GB; good for epoch up to #202
17734:13:30:01.031: GPU1 GPU1: Allocating light cache buffer (41.2) MB; good for epoch up to #202
17734:13:30:01.134: GPU1 GPU1: Generating DAG for epoch #200
17734:13:30:01.367: GPU2 GPU2: Using new optimized OpenCL kernels (device name 'Ellesmere')
17734:13:30:01.367: GPU2 GPU2: Allocating DAG (2.58) GB; good for epoch up to #202
17734:13:30:01.367: GPU2 GPU2: Allocating light cache buffer (41.2) MB; good for epoch up to #202
17734:13:30:01.470: GPU2 GPU2: Generating DAG for epoch #200
17734:13:30:01.732: GPU3 GPU3: Using new optimized OpenCL kernels (device name 'Ellesmere')
17734:13:30:01.732: GPU3 GPU3: Allocating DAG (2.58) GB; good for epoch up to #202
17734:13:30:01.732: GPU3 GPU3: Allocating light cache buffer (41.2) MB; good for epoch up to #202
17734:13:30:01.834: GPU3 GPU3: Generating DAG for epoch #200
17734:13:30:02.096: GPU4 GPU4: Using new optimized OpenCL kernels (device name 'Ellesmere')
17734:13:30:02.096: GPU4 GPU4: Allocating DAG (2.58) GB; good for epoch up to #202
17734:13:30:02.096: GPU4 GPU4: Allocating light cache buffer (41.2) MB; good for epoch up to #202
17734:13:30:02.198: GPU4 GPU4: Generating DAG for epoch #200
17734:13:30:02.444: GPU5 GPU5: Using new optimized OpenCL kernels (device name 'Ellesmere')
17734:13:30:02.444: GPU5 GPU5: Allocating DAG (2.58) GB; good for epoch up to #202
17734:13:30:02.444: GPU5 GPU5: Allocating light cache buffer (41.2) MB; good for epoch up to #202
17734:13:30:02.561: GPU5 GPU5: Generating DAG for epoch #200
17734:13:30:02.576: GPU5 GPU5: clEnqueueNDRangeKernel (-4)
17734:13:30:02.658: GPU1 GPU1: DAG  19%
17734:13:30:02.796: GPU6 GPU6: Using new optimized OpenCL kernels (device name 'Ellesmere')
17734:13:30:02.796: GPU6 GPU6: Allocating DAG (2.58) GB; good for epoch up to #202
17734:13:30:02.796: GPU6 GPU6: Allocating light cache buffer (41.2) MB; good for epoch up to #202
17734:13:30:02.899: GPU6 GPU6: Generating DAG for epoch #200
17734:13:30:02.901: GPU6 GPU6: clEnqueueNDRangeKernel (-4)
17734:13:30:03.303: GPU2 GPU2: DAG  25%
17734:13:30:03.352: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
17734:13:30:03.352: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17734:13:30:03.556: GPU3 GPU3: DAG  31%
17734:13:30:03.708: GPU4 GPU4: DAG  19%
17734:13:30:04.476: GPU1 GPU1: DAG  50%
17734:13:30:05.136: GPU3 GPU3: DAG  63%
17734:13:30:05.143: GPU2 GPU2: DAG  56%
17734:13:30:05.548: GPU4 GPU4: DAG  50%
17734:13:30:06.293: GPU1 GPU1: DAG  81%
17734:13:30:06.655: GPU2 GPU2: DAG  81%
17734:13:30:06.710: GPU3 GPU3: DAG  94%
17734:13:30:07.026: GPU3 GPU3: DAG generated in 5.2 s (505.6 MB/s)
17734:13:30:07.358: GPU4 GPU4: DAG  81%
17734:13:30:07.384: GPU1 GPU1: DAG generated in 6.2 s (419.9 MB/s)
17734:13:30:07.843: GPU2 GPU2: DAG generated in 6.4 s (411.8 MB/s)
17734:13:30:08.422: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

17734:13:30:08.448: GPU4 GPU4: DAG generated in 6.2 s (419.9 MB/s)
17734:13:30:08.515: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x575909c317345e81fa3365b667c08332ae4c0f23f98bfb37bdfe11f34a12120e","0x8308d376eeb469b7ff84bd59c51988d9618b208dc3b951d1dc1918fa08306723","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5bafa5"]}
17734:13:30:08.740: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
17734:13:30:08.740: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17734:13:30:13.824: main Eth speed: 108.972 MH/s, shares: 0/0/0, time: 0:00
17734:13:30:13.824: main GPUs: 1: 26.156 MH/s (0) 2: 25.317 MH/s (0) 3: 31.333 MH/s (0) 4: 26.166 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17734:13:30:18.431: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

17734:13:30:18.431: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0","0xc59c41a63f0da14970841cb14114f89d6f9be1a688a8a337f8b42638ec7e61eb"]}

17734:13:30:18.531: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x575909c317345e81fa3365b667c08332ae4c0f23f98bfb37bdfe11f34a12120e","0x8308d376eeb469b7ff84bd59c51988d9618b208dc3b951d1dc1918fa08306723","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5bafa5"]}
17734:13:30:18.535: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
17734:13:30:18.978: main Eth speed: 112.757 MH/s, shares: 0/0/0, time: 0:00
17734:13:30:18.978: main GPUs: 1: 27.016 MH/s (0) 2: 26.699 MH/s (0) 3: 31.710 MH/s (0) 4: 27.331 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17734:13:30:24.055: main Eth speed: 116.519 MH/s, shares: 0/0/0, time: 0:00
17734:13:30:24.055: main GPUs: 1: 28.089 MH/s (0) 2: 27.942 MH/s (0) 3: 32.104 MH/s (0) 4: 28.384 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
17734:13:30:24.477: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x1c69d6dd774d17b466970cb1ac8380e45293155345de1655d8671de47a8947ff","0x8308d376eeb469b7ff84bd59c51988d9618b208dc3b951d1dc1918fa08306723","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5bafa6"]}
17734:13:30:24.477: eths Eth: New job #1c69d6dd from asia1.ethermine.org:4444; diff: 4000MH
17734:13:30:24.508: GPU5 GPU5: Starting up... (0)
17734:13:30:24.539: GPU6 GPU6: Starting up... (0)
17734:13:30:24.561: GPU5 GPU5: Using new optimized OpenCL kernels (device name 'Ellesmere')
17734:13:30:24.561: GPU5 GPU5: Allocating DAG (2.58) GB; good for epoch up to #202
17734:13:30:24.561: GPU5 GPU5: Allocating light cache buffer (41.2) MB; good for epoch up to #202
17734:13:30:24.673: GPU5 GPU5: Generating DAG for epoch #200
17734:13:30:24.675: GPU5 GPU5: clEnqueueNDRangeKernel (-4)

There is a way to revert the update!

Use this bro:

https://www.howtogeek.com/235474/how-to-roll-back-builds-and-uninstall-updates-on-windows-10/

[Bojcha]

Why miner randomly drops hashrate on cards? Tested on many different rx rigs and always same.

[rongphuongnam]

Rollback to 2.9e will be OK 

Why miner randomly drops hashrate on cards? Tested on many different rx rigs and always same.

[Germini]

-coin moac is not an option can you add it ? or add -nofee and lower hashrate or something to mine other coin that is not in the list.
thanks

[gsrcrxsi314]

Why miner randomly drops hashrate on cards? Tested on many different rx rigs and always same.

please be more vague. maybe with less information we can solve your problem.

[Bojcha]

Why miner randomly drops hashrate on cards? Tested on many different rx rigs and always same.

please be more vague. maybe with less information we can solve your problem.

Sorry PPO. Probably not question for you.

[NicoxDJ]

how to get jsonrpc with curl for this miner?
I'm trying this and it's not working

curl -X POST -H "Content-Type: application/json" -d '{"id":0,"jsonrpc":"2.0","method":"miner_getstat1"}' http://IP:3333

I didn't make it with curl but I made it with python I had to add a newline character \n at the end of the request.
like this {"id":0,"jsonrpc":"2.0","method":"miner_getstat1"}\n

Hey Germini,
Can you post your code please?
I found one python code somewhere here, but neither with \n it does not working :/

Hi, no problem with this code you can get all the data from a claymore or phoenixminer with no problem using python. thanks to (https://github.com/pistonov/RedTools-Rig-Light)

Code:

import socket
import json

def get_data(ip, port):
    sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    server_address = (ip, int(port))
    try:
        sock.connect(server_address)
    except Exception as e:
        return []
    request = '{\"id\":0,\"jsonrpc\":\"2.0\",\"method\":\"miner_getstat1\"}\n'
    request = request.encode()
    try:
        sock.sendall(request)
    except Exception as e:
        return []
    try:
        data = sock.recv(512)
    except Exception as e:
        return []
    message = json.loads(data)
    sock.close()
    return message

def get_data_claymore(miner_ip, miner_port):
    hashrate_total = []
    hashrate = []
    accepted_shares = []
    invalid_shares = []
    miner_uptime = []

    data = get_data(miner_ip, miner_port)

    try:
        all = data['result'][6].split(';')
        gpu_temp = all[::2]
        gpu_fans = all[1::2]
        hashrate_total = int(data['result'][2].split(';')[0])
        hashrate = data['result'][3].split(';')
        accepted_shares = int(data['result'][2].split(';')[1])
        invalid_shares = int(data['result'][2].split(';')[2])
        miner_uptime = data['result'][1]
        return gpu_temp, gpu_fans, hashrate_total, hashrate, accepted_shares, invalid_shares, miner_uptime

    except Exception as e:
        return []

data = get_data_claymore("192.168.1.13", 3333)
print(data)

Enjoy my friend!

Thanks!! It works on Phoenix, but it doesn't on Claymore. It doesn't get the info i goes, because cannot decode JSON:
raise ValueError("No JSON object could be decoded")

[timnguyen]

When the GPU cause the error. The windows has open the error dialog box , I had to close the box then the miner can be restart. Is there anyway to stop this step?

I had already close the error reporting service of window, and I didnt have this with claymore miner. I prefer to use phoenix but this step consume much of my time.

[Stihlus]

When the GPU cause the error. The windows has open the error dialog box , I had to close the box then the miner can be restart. Is there anyway to stop this step?

I had already close the error reporting service of window, and I didnt have this with claymore miner. I prefer to use phoenix but this step consume much of my time.

Hi,

You have this issue because you didn't disable the Error Reporting in Windows (maybe you didn't disable and you still have a glitch somewhere) and your "-rmode 1" or "-rmode 2" command in miner code and reboot.bat file won't work.
You can search on google or you can use some of this links
1_Click_Here
2_Click_Here
3_Click_Here

or, if you want more things to change/tweak on the rig you can use this little bat file ....
Windows 10 Tweaks for Mining

Regards,
Radu

[shakler]

Showing user a higher hashrate requires basic coding skills. Im not sure if this "miner" even mines lol. Its about %70-90 slower than claymore's dual miner.

[lesjokolat]

Showing user a higher hashrate requires basic coding skills. Im not sure if this "miner" even mines lol. Its about %70-90 slower than claymore's dual miner.

go bash and waste your time somewhere else...

It shows a very good hashrate, most importantly the pool where one mines shows  a great hash rate.

You get paid by the post to bash? PM is 3 to 5 %faster than CM... Also less wattage and less crashes than 11.9....

[rgzrgz]

debugger detected on amd adrenalin 18.3.4.Rx 570 ASUS Radeon RX 570 ROG-STRIX + ASUS Radeon RX 580 ROG-STRIX-RX580-O8G-GAMING 8.0 GB

• 4 rx 570 + 2 rx 580
• Windows 10 x 64 LTSB
• PhoenixMiner 3.0c
• adrenalin 18.3.4.
• Virtual Memory - 64 GB
• use -amd key in .bat
• motherboard - asrock h81 pro btc r2.0
• 4 gb mem
• 120 gb ssd
• clean system

[4play]

I using PM 3.0c and every 5 sometimes 6 days PM stop working. What happend and how to fix this?
Have maybe someone .bat file for auto restar/reboot PM if PB stop working?

Code:

2018.07.26:00:42:06.959: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0xda40f35db43beeb3a7e6b66304068bbc0ca9ef3c25c4a8d68dad6a7de14835f0","0x0565d880e378b22250f35f260bac49983734114a9d338b7d7bacea1985c67dd4","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2018.07.26:00:42:06.959: eths Eth: New job #da40f35d from eth-eu1.nanopool.org:9999; diff: 10000MH
2018.07.26:00:42:07.210: GPU3 GPU3: Starting up... (0)
2018.07.26:00:42:07.210: GPU3 Eth: Generating light cache for epoch #201
2018.07.26:00:42:07.370: GPU2 GPU2: Starting up... (0)
2018.07.26:00:42:07.396: GPU4 GPU4: Starting up... (0)
2018.07.26:00:42:07.396: GPU5 GPU5: Starting up... (0)
2018.07.26:00:42:07.422: GPU1 GPU1: Starting up... (0)
2018.07.26:00:42:07.429: GPU6 GPU6: Starting up... (0)
2018.07.26:00:42:10.009: GPU6 GPU6: Generating DAG for epoch #201
2018.07.26:00:42:10.009: GPU5 GPU5: Generating DAG for epoch #201
2018.07.26:00:42:10.010: GPU3 GPU3: Generating DAG for epoch #201
2018.07.26:00:42:10.011: GPU4 GPU4: Generating DAG for epoch #201
2018.07.26:00:42:10.011: GPU2 GPU2: Generating DAG for epoch #201
2018.07.26:00:42:10.011: GPU1 GPU1: Generating DAG for epoch #201
2018.07.26:00:42:11.238: main Eth speed: 0.000 MH/s, shares: 3574/0/22, time: 52:09
2018.07.26:00:42:11.238: main GPUs: 1: 0.000 MH/s (582) 2: 0.000 MH/s (595) 3: 0.000 MH/s (591) 4: 0.000 MH/s (596) 5: 0.000 MH/s (592) 6: 0.000 MH/s (618/22)
2018.07.26:00:42:11.511: GPU5 GPU5: DAG  19%
2018.07.26:00:42:11.515: GPU2 GPU2: DAG  19%
2018.07.26:00:42:11.515: GPU3 GPU3: DAG  19%
2018.07.26:00:42:11.518: GPU4 GPU4: DAG  19%
2018.07.26:00:42:11.528: GPU6 GPU6: DAG  19%
2018.07.26:00:42:12.519: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2018.07.26:00:42:12.546: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0xda40f35db43beeb3a7e6b66304068bbc0ca9ef3c25c4a8d68dad6a7de14835f0","0x0565d880e378b22250f35f260bac49983734114a9d338b7d7bacea1985c67dd4","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2018.07.26:00:42:13.011: GPU5 GPU5: DAG  41%
2018.07.26:00:42:13.036: GPU6 GPU6: DAG  41%
2018.07.26:00:42:13.223: GPU3 GPU3: DAG  44%
2018.07.26:00:42:13.225: GPU2 GPU2: DAG  44%
2018.07.26:00:42:13.230: GPU4 GPU4: DAG  44%
2018.07.26:00:42:13.698: GPU1 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.700: GPU1 GPU1 initMiner error: unspecified launch failure
2018.07.26:00:42:13.711: GPU3 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.711: GPU3 GPU3 initMiner error: unspecified launch failure
2018.07.26:00:42:13.711: GPU4 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.711: GPU4 GPU4 initMiner error: unspecified launch failure
2018.07.26:00:42:13.785: GPU6 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.785: GPU6 GPU6 initMiner error: unspecified launch failure
2018.07.26:00:42:13.801: GPU2 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.801: GPU5 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.801: GPU2 GPU2 initMiner error: unspecified launch failure
2018.07.26:00:42:13.801: GPU5 GPU5 initMiner error: unspecified launch failure

[sxemini]

Many people have this problem, i think they all clock ther nvidia cards to high. I had the same problem in the past, makes no errors for a couple of days and then restarts with the same error. I clock 1 of my cards lower, now it works perfect.
The problem is, on nvidia cards we can not see hardware errors in hwinfo like we can see it on amd. this is my opinion and i working with over 100 gpu´s.

I see you have 22 incorrect shares on gpu 6, another indication of excessive overclocking.

[4play]

Many people have this problem, i think they all clock ther nvidia cards to high. I had the same problem in the past, makes no errors for a couple of days and then restarts with the same error. I clock 1 of my cards lower, now it works perfect.
The problem is, on nvidia cards we can not see hardware errors in hwinfo like we can see it on amd. this is my opinion and i working with over 100 gpu´s.

I see you have 22 incorrect shares on gpu 6, another indication of excessive overclocking.

Tnx for your answer. I know for GPU 6 I have still problem with this GPU. This GPU 6 it's already less OC if I compare other GPUs on this rig. Maybe it would make sense this GPU 6 still to drop OC settings?

[okiesmokie]

Anyone have answer for this behavior,i have 5 rigs and all are crazy on phoenix or is it normal ?

https://imgur.com/a/BuqBtzN

https://imgur.com/a/oFSCLaU

Tried many drivers with overdriventool,win 10 ltsb,no memory errors,compute enabled etc so its not oc,ping is normal around 30-40ms.Images are pool side,miner side looks stable and ok,variations in miner are 1-2mhs up and down sometimes,tried clkernel 2 but drops are worse miner side.Anyone have any clue?thx

[GreenDust]

Hello guys.
What parameter do I need to tweak in config file to speed up my GTX 1070 cards? I get 3 mh less on phenix then on dual claymore. I would like to try to get it optimized.

[lesjokolat]

see if -gt or -mi help see read me file.

Does it auto tune first time? There is also a - nvidia command did you use thwt?

[GreenDust]

see if -gt or -mi help see read me file.

Does it auto tune first time? There is also a - nvidia command did you use thwt?

It did not auto tune. I used -nvidia and -mi 14

I don't have thwt parameter mention in readme file


This is my config

Code:

PhoenixMiner.exe -pool eu1.nanopool.org:9999 -wal [my wallet here] -worker worker1/myemail@gmail.com -epsw x -proto 2 -coin eth -cdm 0 -nvidia -mi 14 -gt 300

Does that seem correct?

Could anybody tell me how to properly assign email in nano pool config? When i try wallet/workername/email the nano pool shows invalid worker name.
I also tried wallet.workername/email  - the same output.

Also, what does "unable to get fan speed - unknown error (999) " mean? Does that mean video card crashed?