PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[timnguyen]

When the GPU cause the error. The windows has open the error dialog box , I had to close the box then the miner can be restart. Is there anyway to stop this step?

I had already close the error reporting service of window, and I didnt have this with claymore miner. I prefer to use phoenix but this step consume much of my time.

[Stihlus]

When the GPU cause the error. The windows has open the error dialog box , I had to close the box then the miner can be restart. Is there anyway to stop this step?

I had already close the error reporting service of window, and I didnt have this with claymore miner. I prefer to use phoenix but this step consume much of my time.

Hi,

You have this issue because you didn't disable the Error Reporting in Windows (maybe you didn't disable and you still have a glitch somewhere) and your "-rmode 1" or "-rmode 2" command in miner code and reboot.bat file won't work.
You can search on google or you can use some of this links
1_Click_Here
2_Click_Here
3_Click_Here

or, if you want more things to change/tweak on the rig you can use this little bat file ....
Windows 10 Tweaks for Mining

Regards,
Radu

[shakler]

Showing user a higher hashrate requires basic coding skills. Im not sure if this "miner" even mines lol. Its about %70-90 slower than claymore's dual miner.

[lesjokolat]

Showing user a higher hashrate requires basic coding skills. Im not sure if this "miner" even mines lol. Its about %70-90 slower than claymore's dual miner.

go bash and waste your time somewhere else...

It shows a very good hashrate, most importantly the pool where one mines shows  a great hash rate.

You get paid by the post to bash? PM is 3 to 5 %faster than CM... Also less wattage and less crashes than 11.9....

[rgzrgz]

debugger detected on amd adrenalin 18.3.4.Rx 570 ASUS Radeon RX 570 ROG-STRIX + ASUS Radeon RX 580 ROG-STRIX-RX580-O8G-GAMING 8.0 GB

• 4 rx 570 + 2 rx 580
• Windows 10 x 64 LTSB
• PhoenixMiner 3.0c
• adrenalin 18.3.4.
• Virtual Memory - 64 GB
• use -amd key in .bat
• motherboard - asrock h81 pro btc r2.0
• 4 gb mem
• 120 gb ssd
• clean system

[4play]

I using PM 3.0c and every 5 sometimes 6 days PM stop working. What happend and how to fix this?
Have maybe someone .bat file for auto restar/reboot PM if PB stop working?

Code:

2018.07.26:00:42:06.959: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0xda40f35db43beeb3a7e6b66304068bbc0ca9ef3c25c4a8d68dad6a7de14835f0","0x0565d880e378b22250f35f260bac49983734114a9d338b7d7bacea1985c67dd4","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2018.07.26:00:42:06.959: eths Eth: New job #da40f35d from eth-eu1.nanopool.org:9999; diff: 10000MH
2018.07.26:00:42:07.210: GPU3 GPU3: Starting up... (0)
2018.07.26:00:42:07.210: GPU3 Eth: Generating light cache for epoch #201
2018.07.26:00:42:07.370: GPU2 GPU2: Starting up... (0)
2018.07.26:00:42:07.396: GPU4 GPU4: Starting up... (0)
2018.07.26:00:42:07.396: GPU5 GPU5: Starting up... (0)
2018.07.26:00:42:07.422: GPU1 GPU1: Starting up... (0)
2018.07.26:00:42:07.429: GPU6 GPU6: Starting up... (0)
2018.07.26:00:42:10.009: GPU6 GPU6: Generating DAG for epoch #201
2018.07.26:00:42:10.009: GPU5 GPU5: Generating DAG for epoch #201
2018.07.26:00:42:10.010: GPU3 GPU3: Generating DAG for epoch #201
2018.07.26:00:42:10.011: GPU4 GPU4: Generating DAG for epoch #201
2018.07.26:00:42:10.011: GPU2 GPU2: Generating DAG for epoch #201
2018.07.26:00:42:10.011: GPU1 GPU1: Generating DAG for epoch #201
2018.07.26:00:42:11.238: main Eth speed: 0.000 MH/s, shares: 3574/0/22, time: 52:09
2018.07.26:00:42:11.238: main GPUs: 1: 0.000 MH/s (582) 2: 0.000 MH/s (595) 3: 0.000 MH/s (591) 4: 0.000 MH/s (596) 5: 0.000 MH/s (592) 6: 0.000 MH/s (618/22)
2018.07.26:00:42:11.511: GPU5 GPU5: DAG  19%
2018.07.26:00:42:11.515: GPU2 GPU2: DAG  19%
2018.07.26:00:42:11.515: GPU3 GPU3: DAG  19%
2018.07.26:00:42:11.518: GPU4 GPU4: DAG  19%
2018.07.26:00:42:11.528: GPU6 GPU6: DAG  19%
2018.07.26:00:42:12.519: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2018.07.26:00:42:12.546: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0xda40f35db43beeb3a7e6b66304068bbc0ca9ef3c25c4a8d68dad6a7de14835f0","0x0565d880e378b22250f35f260bac49983734114a9d338b7d7bacea1985c67dd4","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2018.07.26:00:42:13.011: GPU5 GPU5: DAG  41%
2018.07.26:00:42:13.036: GPU6 GPU6: DAG  41%
2018.07.26:00:42:13.223: GPU3 GPU3: DAG  44%
2018.07.26:00:42:13.225: GPU2 GPU2: DAG  44%
2018.07.26:00:42:13.230: GPU4 GPU4: DAG  44%
2018.07.26:00:42:13.698: GPU1 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.700: GPU1 GPU1 initMiner error: unspecified launch failure
2018.07.26:00:42:13.711: GPU3 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.711: GPU3 GPU3 initMiner error: unspecified launch failure
2018.07.26:00:42:13.711: GPU4 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.711: GPU4 GPU4 initMiner error: unspecified launch failure
2018.07.26:00:42:13.785: GPU6 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.785: GPU6 GPU6 initMiner error: unspecified launch failure
2018.07.26:00:42:13.801: GPU2 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.801: GPU5 CUDART error in CudaProgram.cu:188 : unspecified launch failure (4)
2018.07.26:00:42:13.801: GPU2 GPU2 initMiner error: unspecified launch failure
2018.07.26:00:42:13.801: GPU5 GPU5 initMiner error: unspecified launch failure

[sxemini]

Many people have this problem, i think they all clock ther nvidia cards to high. I had the same problem in the past, makes no errors for a couple of days and then restarts with the same error. I clock 1 of my cards lower, now it works perfect.
The problem is, on nvidia cards we can not see hardware errors in hwinfo like we can see it on amd. this is my opinion and i working with over 100 gpu´s.

I see you have 22 incorrect shares on gpu 6, another indication of excessive overclocking.

[4play]

Many people have this problem, i think they all clock ther nvidia cards to high. I had the same problem in the past, makes no errors for a couple of days and then restarts with the same error. I clock 1 of my cards lower, now it works perfect.
The problem is, on nvidia cards we can not see hardware errors in hwinfo like we can see it on amd. this is my opinion and i working with over 100 gpu´s.

I see you have 22 incorrect shares on gpu 6, another indication of excessive overclocking.

Tnx for your answer. I know for GPU 6 I have still problem with this GPU. This GPU 6 it's already less OC if I compare other GPUs on this rig. Maybe it would make sense this GPU 6 still to drop OC settings?

[okiesmokie]

Anyone have answer for this behavior,i have 5 rigs and all are crazy on phoenix or is it normal ?

https://imgur.com/a/BuqBtzN

https://imgur.com/a/oFSCLaU

Tried many drivers with overdriventool,win 10 ltsb,no memory errors,compute enabled etc so its not oc,ping is normal around 30-40ms.Images are pool side,miner side looks stable and ok,variations in miner are 1-2mhs up and down sometimes,tried clkernel 2 but drops are worse miner side.Anyone have any clue?thx

[GreenDust]

Hello guys.
What parameter do I need to tweak in config file to speed up my GTX 1070 cards? I get 3 mh less on phenix then on dual claymore. I would like to try to get it optimized.

[lesjokolat]

see if -gt or -mi help see read me file.

Does it auto tune first time? There is also a - nvidia command did you use thwt?

[GreenDust]

see if -gt or -mi help see read me file.

Does it auto tune first time? There is also a - nvidia command did you use thwt?

It did not auto tune. I used -nvidia and -mi 14

I don't have thwt parameter mention in readme file


This is my config

Code:

PhoenixMiner.exe -pool eu1.nanopool.org:9999 -wal [my wallet here] -worker worker1/myemail@gmail.com -epsw x -proto 2 -coin eth -cdm 0 -nvidia -mi 14 -gt 300

Does that seem correct?

Could anybody tell me how to properly assign email in nano pool config? When i try wallet/workername/email the nano pool shows invalid worker name.
I also tried wallet.workername/email  - the same output.

Also, what does "unable to get fan speed - unknown error (999) " mean? Does that mean video card crashed?

[Vicks-Berg]

Could anybody tell me how to properly assign email in nano pool config? When i try wallet/workername/email the nano pool shows invalid worker name.
I also tried wallet.workername/email  - the same output.

don't put -worker command line ... just use -wal walletaddress/workername/email

Also, what does "unable to get fan speed - unknown error (999) " mean? Does that mean video card crashed?

Have you tried to lowering your OC setting?

[GreenDust]

Could anybody tell me how to properly assign email in nano pool config? When i try wallet/workername/email the nano pool shows invalid worker name.
I also tried wallet.workername/email  - the same output.

don't put -worker command line ... just use -wal walletaddress/workername/email

Also, what does "unable to get fan speed - unknown error (999) " mean? Does that mean video card crashed?

Have you tried to lowering your OC setting?

I lowered the OC and it seems to run stable but hashing lower then claymore for some reason. I am getting 32mh per card and only 27 or 26 on phoenix. Is the -gt parameter has any effect on cuda?

[Vicks-Berg]

I lowered the OC and it seems to run stable but hashing lower then claymore for some reason. I am getting 32mh per card and only 27 or 26 on phoenix. Is the -gt parameter has any effect on cuda?

i never used -gt command line, and here my start.bat (it's not config.txt)

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

PhoenixMiner.exe -pool us-east.ethash-hub.miningpoolhub.com:20535 -wal vickyzz.eth01 -pass x -proto 1 -coin eth -ftimeout 120 -nvidia
pause

with core -200, memory + 800 and PL 70% I get 32 Mh/s stable hashrate as reported by phoenixminer

[hesido]

I tried this today (in benchmark mode because my miner currently has no internet connection until I sort out some things), VERY promising.

One thing I noticed that it constantly tries to set the OC for my second gpu (Rx580) in my 13 GPU rig, it's the one that seems unstable (A bad samsung mem, perhaps), it cannot go above 30 without crashing to 0 h/sec. Even when I keep it below 30 for stability, where it doesn't crash, I see Phoenix trying to set the voltages every few minutes.  Is that GPU a dud?

[FRosterdam]

It seems that option -ftimeout doesnt work. Test on 3.0c both Nvidia and AMD cards. Tried to set -ftimeout 60.

From original text:
-ftimeout <n> Reconnect if no new ethash job is receved for n seconds (default: 600)

[GreenDust]

Exactly same issue

[r1pst4rt]

It looks like the "autotune" process overrides my cclock mlock and cvdcc I've imported from Claymore.  Thus is bumps up power usage/heat.  I have -ethi and -dcri set in claymore how do these transpose across?  The autotune pushes my cards too much causing too much power/heat.

[john1010]

I tried phoenix before but I got lots of error.. Hey guys what is your experience in this latest version, is it now by pass the claymore speed and reliability? I will going turn on my mining again.. Hope all the alts will now recover.