PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[Metroid]

How will dual mining affect ETH hashrate and power usage?
Using radeon 570

I try with my 4x RX470, 600 W in solo, 705 W adding Blake2S from Nicehash, the hasrate drop from 29,8 MH/s per card to 28,2 Mh/s

Does blak2s earnings cover the new power cost?

There are no earnings mining any blake2s coin, a rx 580 will give you this and profit is minus 5 cents of a dollar per card, https://whattomine.com/coins/220-xvg-blake-2s?utf8=%E2%9C%93&hr=1300.0&p=30.0&fee=10.0&cost=0.1&hcost=0.0&commit=Calculate

However the feature is a developer's promise, so regardless how the market is, thanks for the feature, it might be useful in the future when coin prices start rising again.

[1714492671]

1714492671

[1714492671]

1714492671

[1714492671]

1714492671

[1714492671]

1714492671

[r3lentleSs]

I have 5 x RX480 XFX 8GB cards

I've installed Phoenixminer
And i'm only getting 14 Mh/s @ stock …

How do i enable compute mode, it says i need to run it as administrator but then the miner just closes when starting....

I've installed latest AMD driver, should i install blockchain driver ?

Which OC tool is good for these cards ?

MSI AB, TRIXX or …..

thanks

[Branko]

I have 5 x RX480 XFX 8GB cards

I've installed Phoenixminer
And i'm only getting 14 Mh/s @ stock …

How do i enable compute mode, it says i need to run it as administrator but then the miner just closes when starting....

I've installed latest AMD driver, should i install blockchain driver ?

Which OC tool is good for these cards ?

MSI AB, TRIXX or …..

thanks

Pretty easy

[Soliqesh]

I have 5 x RX480 XFX 8GB cards

I've installed Phoenixminer
And i'm only getting 14 Mh/s @ stock …

How do i enable compute mode, it says i need to run it as administrator but then the miner just closes when starting....

I've installed latest AMD driver, should i install blockchain driver ?

Which OC tool is good for these cards ?

MSI AB, TRIXX or …..

thanks

Right click PhoenixMiner.exe, click run as administrator, wait for create dag, type y command, reboot system. Best tool - OverdriveNtool

[Juniormkl]

PhoenixMiner 4.0b (Windows/Linux) added to https://www.minermonitoring.com/



Join our discord https://discord.gg/aGGaeqq



also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

[Guigs321]

I have 5 x RX480 XFX 8GB cards

I've installed Phoenixminer
And i'm only getting 14 Mh/s @ stock …

How do i enable compute mode, it says i need to run it as administrator but then the miner just closes when starting....

I've installed latest AMD driver, should i install blockchain driver ?

Which OC tool is good for these cards ?

MSI AB, TRIXX or …..

thanks

There is a little soft working great and put all yours cards in Compute mode with one click without reboot : https://bitcointalk.org/index.php?topic=2815803.0

Very usefull when you change your drivers...

[SpeedY_Hun]

...

• Finally, please note that the versions of PhoenixMiner before 4.0 only support DAG epoch up to 235. Currently ETC is on DAG 233, so in less than two weeks the old version of PhoenixMiner won't be able to create DAG or mine ETC - you have to upgrade to PhoenixMiner 4.0. For ETH there is more time as it is on DAG 225, and it won't be affected until the next year. As with ETC, you just need to upgrade to the latest version of PhoenixMiner in order to fix the problem.
  

I tried the new beta version, and I still got the "CudaProgram.cu:407 : out of memory " with my 1060 3gb cards if I start ETC mining.

   You have to use Windows 7 or Linux to mine ETC (and soon ETH) with 1060 3GB as Windows 10 "steals" part of the video RAM, making the allocation of enough memory for the DAG impossible even though the DAG is still way less than 3 GB.

Under Win7 is the same problem :/

[Branko]

...

• Finally, please note that the versions of PhoenixMiner before 4.0 only support DAG epoch up to 235. Currently ETC is on DAG 233, so in less than two weeks the old version of PhoenixMiner won't be able to create DAG or mine ETC - you have to upgrade to PhoenixMiner 4.0. For ETH there is more time as it is on DAG 225, and it won't be affected until the next year. As with ETC, you just need to upgrade to the latest version of PhoenixMiner in order to fix the problem.
  

I tried the new beta version, and I still got the "CudaProgram.cu:407 : out of memory " with my 1060 3gb cards if I start ETC mining.

   You have to use Windows 7 or Linux to mine ETC (and soon ETH) with 1060 3GB as Windows 10 "steals" part of the video RAM, making the allocation of enough memory for the DAG impossible even though the DAG is still way less than 3 GB.

Under Win7 is the same problem :/

Maybe enabling integrated GPU would help, as its memory would be allocated for video out, instead one of 1060s?

[SpeedY_Hun]

...

I use intergrated GPU for output

[Branko]

...

I use intergrated GPU for output

Using this tool,

https://investoon.com/tools/dag_size

max (theoretical) date to mine ETC on 3GB cards is 19/MAR/2019
so thats probably about that...if windows use only few megabytes
for its purposes, it makes 3GB cards unusable...time to switch
to some other ethash coin

[VasilyS]

I have 5 x RX480 XFX 8GB cards

I've installed Phoenixminer
And i'm only getting 14 Mh/s @ stock …

How do i enable compute mode, it says i need to run it as administrator but then the miner just closes when starting....

I've installed latest AMD driver, should i install blockchain driver ?

Which OC tool is good for these cards ?

MSI AB, TRIXX or …..

thanks

It is very easy to do in Phoenix miner by adding the parameter -acm  in your BAT-file. It's automatically turn on AMD compute mode on all supported GPUs.

[calebkan]

am i wrong?still says replace real wallet?

PhoenixMiner.exe -pool eu1.ethermine.org:4444 -wal 0x64b2ef0f222e333e4b34a7c82fc4567d6037847b.1 -proto 3



(done..imust write my wallet in epool text)

[thsn07]

Can you add Energy mining? Its kinda ethash(energihash) and it has own miner but its ethminer fork and sucks. It would be superb.

[ManDoneKTM]

Can you add Energy mining? Its kinda ethash(energihash) and it has own miner but its ethminer fork and sucks. It would be superb.

Energy will be a dead coin soon

[sxemini]

Hi Phönixminer, can you add TEO to supported coins? It is a fork from ethash, like ubiq with ubiqhash.

https://explorer.tao.foundation/home
https://github.com/tao-foundation
https://www.tao.foundation

[xunl]

Claymore 11.9 can control OC on nvidia 10 series cards as well as AMD RX 580 cards w/o installing any 3rd party tools. Just bare factory device driver minimum installation (no wattman/afterburn is needed). It's running very stable for long time. Can PhoenixMiner do that?

[DBIXDBIX]

New Ethash minable coin  -----TeslaFunds----  TSF

teslafunds.io

https://bitcointalk.org/index.php?topic=5080832

[hobocoe]

So im having some issues with the miner. Ive tried everything on my end, and cant get rid of the crashes.

here's my system:
Windows 10 home
ASUS Z270-A-PRO
G3930 Celeron
16gb of RAM
128gb SSD
1 Gigabyte vega 56

When I tried to start the miner originally I was getting a bunch of errors (namely the 1500C temp error and it would lock up the system and put all fans to max) so, i updated to the 4.0b build from 3.5.
 
Initially the miner was showing 2 Vega GPU's (only 1 installed) and was trying to mine with both of them at the same time. One was around 21mh/s the other was about 8mh/s (non dual mining just trying eth.) To fix this I used the -gpus 1 to tell it just to use 1 GPU, that managed to get it working and mining at normal speed using 1 "card". But, after some random time, usually around an hour into mining, the miner stops hashing and  doesnt spit out an error, eventually when you try to move the mouse or hit any key on the keyboard it locks up the system and the only option is to hard shutdown.

So with this and some searching I tried many things, removing the OC settings in Wattman (same result), updating windows (same result), then I updated the driver to the newest beta one and that managed to get it to work with out crashing. Then I implemented dual mining and tested for a couple days with no issues, so then I ran xmr-stak to CPU mine, and tested for a couple days as well. After testing for a couple days I went on vacation, came back it ran fine even through multiple internet drops (typical cable internet issues that have since been fixed with hundreds of dollars of equipment lol) each time reconnecting and continuing to hash like it should. Yesterday, I received my order for some new noctua fans and I shut down the computer and installed the fans. upon rebooting I was getting the same eventual hang in the system.

So I dug into windows update thinking it must have installed an update and was causing this issue. So I uninstalled the update that showed it installed yesterday (besides an adobe flash one as I didnt think that would affect this situation)   and its still having the same result. I updated the GPU driver to the newest beta again and still the same issue. Ive since constrained windows update even more than I had it before, to try to prevent something like this in the future.

So with both the 18.11.2 ( i think it was) and the newest 18.12.1.1 beta driver I get the same results.
below is a snippet of the log when it failed, from what I can tell its not showing any errors.

2018.12.07:11:09:39.599: main *** 1:36 *** 12/7 11:09 **************************************
2018.12.07:11:09:39.599: main Eth: Mining ETH on naw-eth.hiveon.net:4444 for 1:36
2018.12.07:11:09:39.599: main Eth: Accepted shares 42 (0 stales), rejected shares 0 (0 stales)
2018.12.07:11:09:39.599: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.12.07:11:09:39.599: main B2S: Accepted shares 114 (0 stales), rejected shares 0 (0 stales)
2018.12.07:11:09:39.599: main B2S: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.12.07:11:09:39.599: main Eth: Maximum difficulty of found share: 37.8 GH (!)
2018.12.07:11:09:39.599: main Eth: Average speed (5 min): 37.595 MH/s
2018.12.07:11:09:39.599: main Eth: Effective speed: 29.10 MH/s; at pool: 29.10 MH/s
2018.12.07:11:09:39.599: main B2S: Average speed (5 min): 1127.842 MH/s
2018.12.07:11:09:39.599: main B2S: Effective speed: 1086.03 MH/s; at pool: 1086.03 MH/s
2018.12.07:11:09:39.599: main 
2018.12.07:11:09:39.662: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","worker":"test","params":[]}

2018.12.07:11:09:39.762: eths Eth: Received: {"jsonrpc":"2.0","result":["0xe13a2a342758ec7cefd8f38301b96583af181a0a1e5283a6f963d97deb1f1715","0xd9fa539e539d09362305f037610448e954ff0c3ef9d32854040c1c0c8cfa45a7","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.12.07:11:09:43.061: eths Eth: Received: { "id":0 , "jsonrpc":"2.0", "result": ["0x3d6aa7cbc4e584f537233d1e98c760608cdb90c4869d4e6d62dfa5a45b6495b5","0xd9fa539e539d09362305f037610448e954ff0c3ef9d32854040c1c0c8cfa45a7","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
2018.12.07:11:09:43.061: eths Eth: New job #3d6aa7cb from naw-eth.hiveon.net:4444; diff: 4000MH
2018.12.07:11:09:44.605: main Eth speed: 37.311 MH/s, shares: 42/0/0, time: 1:36
2018.12.07:11:09:44.605: main B2S speed: 1119.315 MH/s, shares: 114/0/0
2018.12.07:11:09:48.065: eths Eth: Received: { "id":0 , "jsonrpc":"2.0", "result": ["0xf779042bcafe4f48beb5364925785e556fcbf274d32c679127fc476e7b5b355c","0xd9fa539e539d09362305f037610448e954ff0c3ef9d32854040c1c0c8cfa45a7","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
2018.12.07:11:09:48.065: eths Eth: New job #f779042b from naw-eth.hiveon.net:4444; diff: 4000MH
2018.12.07:11:09:49.804: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:36
2018.12.07:11:09:49.804: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:09:54.830: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:36
2018.12.07:11:09:54.830: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:09:59.973: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:36
2018.12.07:11:09:59.973: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:01.017: duas B2S: Received: {"id":null,"method":"mining.notify","params":["5e1","d020859b8e0ebb0954b3b49511fb9419e0237444297a183bc625eb89630b3d9d","0200000040b60a5c010000000000000000000000000000000000000000000000000000000000000 000ffffffff1f03f88229062f503253482f0478b70a5c08","7969696d700000000000012071842b000000002321037670d24409d242e8dd518bf6aaab36162c8 536a3e8789892d7db79cf401ca3e1ac00000000",["8ecd9e09f8831e65d1e6f5f19acc409bdb057bbb3f8304e902a6eb6f527b5d7f"],"00002004","1a03628a","5c0ab640",true]}
2018.12.07:11:10:05.180: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:36
2018.12.07:11:10:05.180: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:10.212: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:36
2018.12.07:11:10:10.212: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:15.215: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:36
2018.12.07:11:10:15.215: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:20.291: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:36
2018.12.07:11:10:20.291: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:24.689: main 
2018.12.07:11:10:24.689: main *** 1:36 *** 12/7 11:10 **************************************
2018.12.07:11:10:24.689: main Eth: Mining ETH on naw-eth.hiveon.net:4444 for 1:36
2018.12.07:11:10:24.689: main Eth: Accepted shares 42 (0 stales), rejected shares 0 (0 stales)
2018.12.07:11:10:24.689: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.12.07:11:10:24.689: main B2S: Accepted shares 114 (0 stales), rejected shares 0 (0 stales)
2018.12.07:11:10:24.689: main B2S: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.12.07:11:10:24.689: main Eth: Maximum difficulty of found share: 37.8 GH (!)
2018.12.07:11:10:24.689: main Eth: Average speed (5 min): 31.891 MH/s
2018.12.07:11:10:24.689: main Eth: Effective speed: 28.87 MH/s; at pool: 28.87 MH/s
2018.12.07:11:10:24.689: main B2S: Average speed (5 min): 956.723 MH/s
2018.12.07:11:10:24.689: main B2S: Effective speed: 1077.63 MH/s; at pool: 1077.63 MH/s
2018.12.07:11:10:24.689: main 
2018.12.07:11:10:25.363: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:37
2018.12.07:11:10:25.363: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:30.476: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:37
2018.12.07:11:10:30.476: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:35.682: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:37
2018.12.07:11:10:35.682: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:40.724: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:37
2018.12.07:11:10:40.724: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:45.930: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:37
2018.12.07:11:10:45.930: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:50.989: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:37
2018.12.07:11:10:50.989: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:10:56.181: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:37
2018.12.07:11:10:56.181: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:11:01.420: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:37
2018.12.07:11:11:01.420: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:11:05.395: wdog GPU1 not responding
2018.12.07:11:11:05.395: wdog Thread(s) not responding. Restarting.
2018.12.07:11:11:06.630: main Eth speed: 0.000 MH/s, shares: 42/0/0, time: 1:37
2018.12.07:11:11:06.630: main B2S speed: 0.000 MH/s, shares: 114/0/0
2018.12.07:11:11:09.812: main 
2018.12.07:11:11:09.812: main *** 1:37 *** 12/7 11:11 **************************************
2018.12.07:11:11:09.812: main Eth: Mining ETH on naw-eth.hiveon.net:4444 for 1:37
2018.12.07:11:11:09.812: main Eth: Accepted shares 42 (0 stales), rejected shares 0 (0 stales)
2018.12.07:11:11:09.812: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.12.07:11:11:09.812: main B2S: Accepted shares 114 (0 stales), rejected shares 0 (0 stales)
2018.12.07:11:11:09.812: main B2S: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.12.07:11:11:09.812: main Eth: Maximum difficulty of found share: 37.8 GH (!)
2018.12.07:11:11:09.812: main Eth: Average speed (5 min): 26.163 MH/s
2018.12.07:11:11:09.812: main Eth: Effective speed: 28.65 MH/s; at pool: 28.65 MH/s
2018.12.07:11:11:09.812: main B2S: Average speed (5 min): 784.903 MH/s
2018.12.07:11:11:09.812: main B2S: Effective speed: 1069.36 MH/s; at pool: 1069.36 MH/s
2018.12.07:11:11:09.812: main 

If anyone has any trick or tips to get this issue fixed please let me know, I would love to get back the random stability that I had for that short time.

(Oh and thank you Phoenix crew for getting the Nvidia DAG issue  resolved! I was finally able to use my Nvidia rig and tested it for 3 days with no issues!)

Thank you all for any help you can provide.

[yoonline]

2018.12.08:02:23:40.345: main Phoenix Miner 4.0b Windows/msvc - Release build

2018.12.08:02:23:40.345: main No CUDA driver found
2018.12.08:02:23:42.121: main OpenCL driver version: 17.8-BETA
2018.12.08:02:23:42.121: main Available GPUs for mining:
2018.12.08:02:23:42.121: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 1.2, 3 GB VRAM, 36 CUs
2018.12.08:02:23:42.121: main GPU2: Radeon RX 580 Series (pcie 3), OpenCL 1.2, 3 GB VRAM, 36 CUs
2018.12.08:02:23:42.121: main GPU3: Radeon RX 580 Series (pcie 4), OpenCL 1.2, 3 GB VRAM, 36 CUs
2018.12.08:02:23:42.121: main GPU4: Radeon RX 580 Series (pcie 6), OpenCL 1.2, 3 GB VRAM, 36 CUs
2018.12.08:02:23:42.121: main GPU5: Radeon RX 580 Series (pcie , OpenCL 1.2, 3 GB VRAM, 36 CUs



2018.12.08:02:23:43.710: main Starting GPU mining
2018.12.08:02:23:43.710: main Matched GPU1 to ADL adapter index 6 (method 1)
2018.12.08:02:23:43.737: main GPU1: Using the X2 ODN API
2018.12.08:02:23:43.737: main GPU1: Created ADL monitor for adapter 6; overdrive version: 7
2018.12.08:02:23:43.737: main GPU1: using the blockchain beta driver
2018.12.08:02:23:43.737: main Matched GPU2 to ADL adapter index 24 (method 1)
2018.12.08:02:23:43.763: main GPU2: Using the X2 ODN API
2018.12.08:02:23:43.763: main GPU2: Created ADL monitor for adapter 24; overdrive version: 7
2018.12.08:02:23:43.764: main GPU2: using the blockchain beta driver
2018.12.08:02:23:43.764: main Matched GPU3 to ADL adapter index 18 (method 1)
2018.12.08:02:23:43.792: main GPU3: Using the X2 ODN API
2018.12.08:02:23:43.792: main GPU3: Created ADL monitor for adapter 18; overdrive version: 7
2018.12.08:02:23:43.792: main GPU3: using the blockchain beta driver
2018.12.08:02:23:43.792: main Matched GPU4 to ADL adapter index 0 (method 1)
2018.12.08:02:23:43.820: main GPU4: Using the X2 ODN API
2018.12.08:02:23:43.820: main GPU4: Created ADL monitor for adapter 0; overdrive version: 7
2018.12.08:02:23:43.820: main GPU4: using the blockchain beta driver
2018.12.08:02:23:43.820: main Matched GPU5 to ADL adapter index 12 (method 1)
2018.12.08:02:23:43.848: main GPU5: Using the X2 ODN API
2018.12.08:02:23:43.848: main GPU5: Created ADL monitor for adapter 12; overdrive version: 7
2018.12.08:02:23:43.848: main GPU5: using the blockchain beta driver
2018.12.08:02:23:43.848: wdog Starting watchdog thread
2018.12.08:02:23:43.849: main Eth: Connecting to ethash pool us1.ethermine.org:4444 (proto: EthProxy)
2018.12.08:02:23:44.051: main Listening for CDM remote manager at port 3333 in read-only mode
2018.12.08:02:23:44.054: main GPU1: 28C 70%, GPU2: 26C 70%, GPU3: 28C 70%, GPU4: 27C 70%, GPU5: 28C 70%
2018.12.08:02:23:45.022: eths Eth: Connected to ethash pool us1.ethermine.org:4444 (172.65.218.238)


2018.12.08:02:23:45.214: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2018.12.08:02:23:45.214: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2018.12.08:02:23:45.368: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0x4f508231e87cdba2ccb108dd61fb36a8396f5c39f0f7235f9278355a4087e4fe","0xd9fa539e539d09362305f037610448e954ff0c3ef9d32854040c1c0c8cfa45a7","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x68757f"]}
2018.12.08:02:23:45.368: eths Eth: New job #4f508231 from us1.ethermine.org:4444; diff: 4000MH
2018.12.08:02:23:45.368: GPU1 GPU1: Starting up... (0)
2018.12.08:02:23:45.369: GPU1 GPU1: Generating ethash light cache for epoch #228
2018.12.08:02:23:45.370: GPU2 GPU2: Starting up... (0)
2018.12.08:02:23:45.372: GPU3 GPU3: Starting up... (0)
2018.12.08:02:23:45.374: GPU4 GPU4: Starting up... (0)
2018.12.08:02:23:45.376: GPU5 GPU5: Starting up... (0)
2018.12.08:02:23:48.578: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x562566f0f8be03dcf25ae394daa6f4ad1118b4b59c468ac6984c7bd03fd9149a","0xd9fa539e539d09362305f037610448e954ff0c3ef9d32854040c1c0c8cfa45a7","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x687580"]}
2018.12.08:02:23:48.578: eths Eth: New job #562566f0 from us1.ethermine.org:4444; diff: 4000MH
2018.12.08:02:23:48.874: GPU1 Light cache generated in 3.5 s (12.7 MB/s)
2018.12.08:02:23:48.929: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2018.12.08:02:23:48.929: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0)
2018.12.08:02:23:49.008: GPU1 GPU1: clCreateCommandQueue (-6)
2018.12.08:02:23:49.114: GPU3 GPU3: clCreateCommandQueue (-6)
2018.12.08:02:23:49.216: GPU4 GPU4: clCreateCommandQueue (-6)
2018.12.08:02:23:49.319: GPU5 GPU5: clCreateCommandQueue (-6)
2018.12.08:02:23:49.421: GPU2 GPU2: clCreateCommandQueue (-6)
2018.12.08:02:23:49.849: wdog Thread(s) not responding. Restarting.
2018.12.08:02:23:50.078: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x0581642034553cd9947e039b68a21d84753436db76ee2f91866a9aee0ffc8865","0xd9fa539e539d09362305f037610448e954ff0c3ef9d32854040c1c0c8cfa45a7","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x687581"]}
2018.12.08:02:23:50.078: eths Eth: New job #05816420 from us1.ethermine.org:4444; diff: 4000MH
2018.12.08:02:23:50.097: GPU1 GPU1: Starting up... (0)
2018.12.08:02:23:50.113: GPU2 GPU2: Starting up... (0)
2018.12.08:02:23:50.118: GPU3 GPU3: Starting up... (0)
2018.12.08:02:23:50.136: GPU4 GPU4: Starting up... (0)
2018.12.08:02:23:50.155: GPU5 GPU5: Starting up... (0)


WINDOWS 10 Block chaindriver. Im having this problem
run great with Claymore, but i want to use phoenix..

[Digital_Seytan]

Why only dual mining only AMD cards and not Nvidia cards  PM dev??

Dual-mining command-line examples:

ETH on ethermine.org ETH, Blake2s on Nicehash:
  PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal YourEthWalletAddress.WorkerName -proto 3 -dpool blake2s.eu.nicehash.com:3361 -dwal YourBtcWalletAddress -dcoin blake2s
Nicehash (Ethash + Blake2s):
  PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal YourBtcWalletAddress -pass x -proto 4 -stales 0 -dpool blake2s.eu.nicehash.com:3361 -dwal YourBtcWalletAddress -dcoin blake2s